Berkeley's XML Database Helper

git-svn-id: https://193.136.92.121/projects/papox/svn/trunk@4 115bd558-cb3e-4a25-8521-28a3a68fd38e

Author: (no author)

BDBXmlHelper/LICENSE

@@ -0,0 +1,165 @@
+		   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

BDBXmlHelper/build.xml

@@ -0,0 +1,81 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- You may freely edit this file. See commented blocks below for -->
+<!-- some examples of how to customize the build. -->
+<!-- (If you delete it and reopen the project it will be recreated.) -->
+<!-- By default, only the Clean and Build commands use this build script. -->
+<!-- Commands such as Run, Debug, and Test only use this build script if -->
+<!-- the Compile on Save feature is turned off for the project. -->
+<!-- You can turn off the Compile on Save (or Deploy on Save) setting -->
+<!-- in the project's Project Properties dialog box.-->
+<project name="BDBXmlHelper" default="default" basedir=".">
+    <description>Builds, tests, and runs the project BDBXmlHelper.</description>
+    <import file="nbproject/build-impl.xml"/>
+    <!--
+
+    There exist several targets which are by default empty and which can be 
+    used for execution of your tasks. These targets are usually executed 
+    before and after some main targets. They are: 
+
+      -pre-init:                 called before initialization of project properties
+      -post-init:                called after initialization of project properties
+      -pre-compile:              called before javac compilation
+      -post-compile:             called after javac compilation
+      -pre-compile-single:       called before javac compilation of single file
+      -post-compile-single:      called after javac compilation of single file
+      -pre-compile-test:         called before javac compilation of JUnit tests
+      -post-compile-test:        called after javac compilation of JUnit tests
+      -pre-compile-test-single:  called before javac compilation of single JUnit test
+      -post-compile-test-single: called after javac compilation of single JUunit test
+      -pre-jar:                  called before JAR building
+      -post-jar:                 called after JAR building
+      -post-clean:               called after cleaning build products
+
+    (Targets beginning with '-' are not intended to be called on their own.)
+
+    Example of inserting an obfuscator after compilation could look like this:
+
+        <target name="-post-compile">
+            <obfuscate>
+                <fileset dir="${build.classes.dir}"/>
+            </obfuscate>
+        </target>
+
+    For list of available properties check the imported 
+    nbproject/build-impl.xml file. 
+
+
+    Another way to customize the build is by overriding existing main targets.
+    The targets of interest are: 
+
+      -init-macrodef-javac:     defines macro for javac compilation
+      -init-macrodef-junit:     defines macro for junit execution
+      -init-macrodef-debug:     defines macro for class debugging
+      -init-macrodef-java:      defines macro for class execution
+      -do-jar-with-manifest:    JAR building (if you are using a manifest)
+      -do-jar-without-manifest: JAR building (if you are not using a manifest)
+      run:                      execution of project 
+      -javadoc-build:           Javadoc generation
+      test-report:              JUnit report generation
+
+    An example of overriding the target for project execution could look like this:
+
+        <target name="run" depends="BDBXmlHelper-impl.jar">
+            <exec dir="bin" executable="launcher.exe">
+                <arg file="${dist.jar}"/>
+            </exec>
+        </target>
+
+    Notice that the overridden target depends on the jar target and not only on 
+    the compile target as the regular run target does. Again, for a list of available 
+    properties which you can use, check the target you are overriding in the
+    nbproject/build-impl.xml file. 
+
+    -->
+    <target name="-post-jar">
+        <jar jarfile="${dist.jar}" update="true">
+            <zipfileset src="${dist.jar}" includes="**/*.class" />
+            <zipfileset src="lib/dbxml.jar" includes="**/*.class"/>
+            <zipfileset src="lib/db.jar" includes="**/*.class"/>
+        </jar>
+    </target> 
+</project>

BDBXmlHelper/lib/CopyLibs/org-netbeans-modules-java-j2seproject-copylibstask.jar

@@ -0,0 +1,15 @@
+libs.CopyLibs.classpath=\
+    ${base}/CopyLibs/org-netbeans-modules-java-j2seproject-copylibstask.jar
+libs.DBXML.classpath=\
+    ${base}/db.jar:\
+    ${base}/dbxml.jar
+libs.junit.classpath=\
+    ${base}/junit/junit-3.8.2.jar
+libs.junit.javadoc=\
+    ${base}/junit/junit-3.8.2-api.zip
+libs.junit_4.classpath=\
+    ${base}/junit_4/junit-4.5.jar
+libs.junit_4.javadoc=\
+    ${base}/junit_4/junit-4.5-api.zip
+libs.junit_4.src=\
+    ${base}/junit_4/junit-4.5-src.jar