Skip to content

Commit 6f2a178

Browse files
BlackNetBlackNet
committed
Autocommit from 2024-06-08 22:47:35
Klipper on commit: 49c0ad6 Moonraker on commit: 346a3d7 Mainsail version: v2.11.2
1 parent 9d47ce9 commit 6f2a178

9 files changed

+278
-33
lines changed

‎config-other/stealthburner_led_effects_3_leds.cfg

+2-1
Original file line numberDiff line numberDiff line change
@@ -56,7 +56,8 @@
5656

5757

5858
[neopixel sb_leds]
59-
pin: NEOPXL_2
59+
#pin: NEOPXL_2
60+
pin: SB2209:gpio16
6061
# The pin connected to the neopixel. This parameter must be provided.
6162
chain_count: 3
6263
# The number of Neopixel chips that are "daisy chained" to the

‎config-other/stealthburner_leds.cfg

+1-1
Original file line numberDiff line numberDiff line change
@@ -65,7 +65,7 @@ chain_count: 10
6565
# provided pin. The default is 1 (which indicates only a single
6666
# Neopixel is connected to the pin).
6767
#color_order: RGB
68-
color_order: GRB,GRB,GRB,GRB,GRB,GRB,GRB,GRB,GRBW,GRBW
68+
color_order: GRB,GRB,GRB,GRB,GRB,GRB,GRB,GRB,GRB,GRB
6969

7070
##
7171
# Set the pixel order required by the LED hardware. Options are GRB,

‎klipper_menuconfigs/config-MMB-CAN

+79
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,79 @@
1+
CONFIG_LOW_LEVEL_OPTIONS=y
2+
# CONFIG_MACH_LPC176X is not set
3+
CONFIG_MACH_STM32=y
4+
# CONFIG_MACH_RP2040 is not set
5+
CONFIG_BOARD_DIRECTORY="stm32"
6+
CONFIG_MCU="stm32g0b1xx"
7+
CONFIG_CLOCK_FREQ=64000000
8+
CONFIG_FLASH_SIZE=0x20000
9+
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
10+
CONFIG_RAM_START=0x20000000
11+
CONFIG_RAM_SIZE=0x24000
12+
CONFIG_STACK_SIZE=512
13+
CONFIG_FLASH_APPLICATION_ADDRESS=0x8002000
14+
CONFIG_FLASH_START=0x8000000
15+
CONFIG_LAUNCH_APP_ADDRESS=0x8002000
16+
CONFIG_BLOCK_SIZE=64
17+
CONFIG_STM32_SELECT=y
18+
# CONFIG_MACH_STM32F103 is not set
19+
# CONFIG_MACH_STM32F207 is not set
20+
# CONFIG_MACH_STM32F401 is not set
21+
# CONFIG_MACH_STM32F405 is not set
22+
# CONFIG_MACH_STM32F407 is not set
23+
# CONFIG_MACH_STM32F429 is not set
24+
# CONFIG_MACH_STM32F446 is not set
25+
# CONFIG_MACH_STM32F031 is not set
26+
# CONFIG_MACH_STM32F042 is not set
27+
# CONFIG_MACH_STM32F070 is not set
28+
# CONFIG_MACH_STM32F072 is not set
29+
# CONFIG_MACH_STM32G0B0 is not set
30+
CONFIG_MACH_STM32G0B1=y
31+
# CONFIG_MACH_STM32H723 is not set
32+
# CONFIG_MACH_STM32H743 is not set
33+
CONFIG_MACH_STM32G0=y
34+
CONFIG_MACH_STM32G0Bx=y
35+
CONFIG_HAVE_STM32_USBFS=y
36+
CONFIG_HAVE_STM32_FDCANBUS=y
37+
CONFIG_STM32_DFU_ROM_ADDRESS=0
38+
# CONFIG_STM32_FLASH_START_0000 is not set
39+
CONFIG_STM32_FLASH_START_2000=y
40+
CONFIG_STM32_CLOCK_REF_8M=y
41+
# CONFIG_STM32_CLOCK_REF_12M is not set
42+
# CONFIG_STM32_CLOCK_REF_16M is not set
43+
# CONFIG_STM32_CLOCK_REF_20M is not set
44+
# CONFIG_STM32_CLOCK_REF_25M is not set
45+
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
46+
CONFIG_CLOCK_REF_FREQ=8000000
47+
CONFIG_STM32F0_TRIM=16
48+
# CONFIG_STM32_USB_PA11_PA12 is not set
49+
# CONFIG_STM32_SERIAL_USART1 is not set
50+
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
51+
# CONFIG_STM32_SERIAL_USART2 is not set
52+
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
53+
# CONFIG_STM32_SERIAL_USART3 is not set
54+
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
55+
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
56+
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
57+
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
58+
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
59+
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
60+
CONFIG_STM32_MMENU_CANBUS_PB0_PB1=y
61+
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
62+
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
63+
CONFIG_STM32_CANBUS_PB0_PB1=y
64+
CONFIG_STM32_APP_START_2000=y
65+
# CONFIG_STM32_APP_START_1000 is not set
66+
CONFIG_USB_VENDOR_ID=0x1d50
67+
CONFIG_USB_DEVICE_ID=0x6177
68+
CONFIG_USB_SERIAL_NUMBER="12345"
69+
CONFIG_CANSERIAL=y
70+
CONFIG_CANBUS=y
71+
CONFIG_CANBUS_FREQUENCY=1000000
72+
CONFIG_CANBUS_FILTER=y
73+
CONFIG_INITIAL_PINS=""
74+
CONFIG_ENABLE_DOUBLE_RESET=y
75+
# CONFIG_ENABLE_BUTTON is not set
76+
CONFIG_ENABLE_LED=y
77+
CONFIG_STATUS_LED_PIN=""
78+
CONFIG_BUILD_DEPLOYER=y
79+
CONFIG_HAVE_CHIPID=y

‎klipper_menuconfigs/config-MMB-klipper

+107
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,107 @@
1+
CONFIG_LOW_LEVEL_OPTIONS=y
2+
# CONFIG_MACH_AVR is not set
3+
# CONFIG_MACH_ATSAM is not set
4+
# CONFIG_MACH_ATSAMD is not set
5+
# CONFIG_MACH_LPC176X is not set
6+
CONFIG_MACH_STM32=y
7+
# CONFIG_MACH_HC32F460 is not set
8+
# CONFIG_MACH_RP2040 is not set
9+
# CONFIG_MACH_PRU is not set
10+
# CONFIG_MACH_AR100 is not set
11+
# CONFIG_MACH_LINUX is not set
12+
# CONFIG_MACH_SIMU is not set
13+
CONFIG_BOARD_DIRECTORY="stm32"
14+
CONFIG_MCU="stm32g0b1xx"
15+
CONFIG_CLOCK_FREQ=64000000
16+
CONFIG_FLASH_SIZE=0x20000
17+
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
18+
CONFIG_RAM_START=0x20000000
19+
CONFIG_RAM_SIZE=0x24000
20+
CONFIG_STACK_SIZE=512
21+
CONFIG_FLASH_APPLICATION_ADDRESS=0x8002000
22+
CONFIG_STM32_SELECT=y
23+
# CONFIG_MACH_STM32F103 is not set
24+
# CONFIG_MACH_STM32F207 is not set
25+
# CONFIG_MACH_STM32F401 is not set
26+
# CONFIG_MACH_STM32F405 is not set
27+
# CONFIG_MACH_STM32F407 is not set
28+
# CONFIG_MACH_STM32F429 is not set
29+
# CONFIG_MACH_STM32F446 is not set
30+
# CONFIG_MACH_STM32F765 is not set
31+
# CONFIG_MACH_STM32F031 is not set
32+
# CONFIG_MACH_STM32F042 is not set
33+
# CONFIG_MACH_STM32F070 is not set
34+
# CONFIG_MACH_STM32F072 is not set
35+
# CONFIG_MACH_STM32G070 is not set
36+
# CONFIG_MACH_STM32G071 is not set
37+
# CONFIG_MACH_STM32G0B0 is not set
38+
CONFIG_MACH_STM32G0B1=y
39+
# CONFIG_MACH_STM32G431 is not set
40+
# CONFIG_MACH_STM32G474 is not set
41+
# CONFIG_MACH_STM32H723 is not set
42+
# CONFIG_MACH_STM32H743 is not set
43+
# CONFIG_MACH_STM32H750 is not set
44+
# CONFIG_MACH_STM32L412 is not set
45+
# CONFIG_MACH_N32G452 is not set
46+
# CONFIG_MACH_N32G455 is not set
47+
CONFIG_MACH_STM32G0=y
48+
CONFIG_MACH_STM32G0Bx=y
49+
CONFIG_HAVE_STM32_USBFS=y
50+
CONFIG_HAVE_STM32_FDCANBUS=y
51+
CONFIG_HAVE_STM32_USBCANBUS=y
52+
CONFIG_STM32_DFU_ROM_ADDRESS=0
53+
CONFIG_STM32_FLASH_START_2000=y
54+
# CONFIG_STM32_FLASH_START_0000 is not set
55+
CONFIG_STM32_CLOCK_REF_8M=y
56+
# CONFIG_STM32_CLOCK_REF_12M is not set
57+
# CONFIG_STM32_CLOCK_REF_16M is not set
58+
# CONFIG_STM32_CLOCK_REF_20M is not set
59+
# CONFIG_STM32_CLOCK_REF_24M is not set
60+
# CONFIG_STM32_CLOCK_REF_25M is not set
61+
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
62+
CONFIG_CLOCK_REF_FREQ=8000000
63+
CONFIG_STM32F0_TRIM=16
64+
# CONFIG_STM32_USB_PA11_PA12 is not set
65+
# CONFIG_STM32_SERIAL_USART1 is not set
66+
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
67+
# CONFIG_STM32_SERIAL_USART2 is not set
68+
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
69+
# CONFIG_STM32_SERIAL_USART3 is not set
70+
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
71+
# CONFIG_STM32_SERIAL_USART5 is not set
72+
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
73+
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
74+
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
75+
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
76+
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
77+
CONFIG_STM32_MMENU_CANBUS_PB0_PB1=y
78+
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
79+
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
80+
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
81+
CONFIG_STM32_CANBUS_PB0_PB1=y
82+
CONFIG_USB_VENDOR_ID=0x1d50
83+
CONFIG_USB_DEVICE_ID=0x614e
84+
CONFIG_USB_SERIAL_NUMBER="12345"
85+
CONFIG_WANT_GPIO_BITBANGING=y
86+
CONFIG_WANT_DISPLAYS=y
87+
CONFIG_WANT_SENSORS=y
88+
CONFIG_WANT_LIS2DW=y
89+
CONFIG_WANT_LDC1612=y
90+
CONFIG_WANT_SOFTWARE_I2C=y
91+
CONFIG_WANT_SOFTWARE_SPI=y
92+
CONFIG_NEED_SENSOR_BULK=y
93+
CONFIG_CANSERIAL=y
94+
CONFIG_CANBUS=y
95+
CONFIG_CANBUS_FREQUENCY=1000000
96+
CONFIG_CANBUS_FILTER=y
97+
CONFIG_INITIAL_PINS=""
98+
CONFIG_HAVE_GPIO=y
99+
CONFIG_HAVE_GPIO_ADC=y
100+
CONFIG_HAVE_GPIO_SPI=y
101+
CONFIG_HAVE_GPIO_I2C=y
102+
CONFIG_HAVE_GPIO_HARD_PWM=y
103+
CONFIG_HAVE_STRICT_TIMING=y
104+
CONFIG_HAVE_CHIPID=y
105+
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
106+
CONFIG_HAVE_BOOTLOADER_REQUEST=y
107+
CONFIG_INLINE_STEPPER_HACK=y

‎klipper_menuconfigs/config-SB2209-CanBoot

+79
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,79 @@
1+
CONFIG_LOW_LEVEL_OPTIONS=y
2+
# CONFIG_MACH_LPC176X is not set
3+
CONFIG_MACH_STM32=y
4+
# CONFIG_MACH_RP2040 is not set
5+
CONFIG_BOARD_DIRECTORY="stm32"
6+
CONFIG_MCU="stm32g0b1xx"
7+
CONFIG_CLOCK_FREQ=64000000
8+
CONFIG_FLASH_SIZE=0x20000
9+
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
10+
CONFIG_RAM_START=0x20000000
11+
CONFIG_RAM_SIZE=0x24000
12+
CONFIG_STACK_SIZE=512
13+
CONFIG_FLASH_APPLICATION_ADDRESS=0x8002000
14+
CONFIG_FLASH_START=0x8000000
15+
CONFIG_LAUNCH_APP_ADDRESS=0x8002000
16+
CONFIG_BLOCK_SIZE=64
17+
CONFIG_STM32_SELECT=y
18+
# CONFIG_MACH_STM32F103 is not set
19+
# CONFIG_MACH_STM32F207 is not set
20+
# CONFIG_MACH_STM32F401 is not set
21+
# CONFIG_MACH_STM32F405 is not set
22+
# CONFIG_MACH_STM32F407 is not set
23+
# CONFIG_MACH_STM32F429 is not set
24+
# CONFIG_MACH_STM32F446 is not set
25+
# CONFIG_MACH_STM32F031 is not set
26+
# CONFIG_MACH_STM32F042 is not set
27+
# CONFIG_MACH_STM32F070 is not set
28+
# CONFIG_MACH_STM32F072 is not set
29+
# CONFIG_MACH_STM32G0B0 is not set
30+
CONFIG_MACH_STM32G0B1=y
31+
# CONFIG_MACH_STM32H723 is not set
32+
# CONFIG_MACH_STM32H743 is not set
33+
CONFIG_MACH_STM32G0=y
34+
CONFIG_MACH_STM32G0Bx=y
35+
CONFIG_HAVE_STM32_USBFS=y
36+
CONFIG_HAVE_STM32_FDCANBUS=y
37+
CONFIG_STM32_DFU_ROM_ADDRESS=0
38+
# CONFIG_STM32_FLASH_START_0000 is not set
39+
CONFIG_STM32_FLASH_START_2000=y
40+
CONFIG_STM32_CLOCK_REF_8M=y
41+
# CONFIG_STM32_CLOCK_REF_12M is not set
42+
# CONFIG_STM32_CLOCK_REF_16M is not set
43+
# CONFIG_STM32_CLOCK_REF_20M is not set
44+
# CONFIG_STM32_CLOCK_REF_25M is not set
45+
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
46+
CONFIG_CLOCK_REF_FREQ=8000000
47+
CONFIG_STM32F0_TRIM=16
48+
# CONFIG_STM32_USB_PA11_PA12 is not set
49+
# CONFIG_STM32_SERIAL_USART1 is not set
50+
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
51+
# CONFIG_STM32_SERIAL_USART2 is not set
52+
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
53+
# CONFIG_STM32_SERIAL_USART3 is not set
54+
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
55+
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
56+
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
57+
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
58+
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
59+
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
60+
CONFIG_STM32_MMENU_CANBUS_PB0_PB1=y
61+
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
62+
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
63+
CONFIG_STM32_CANBUS_PB0_PB1=y
64+
CONFIG_STM32_APP_START_2000=y
65+
# CONFIG_STM32_APP_START_1000 is not set
66+
CONFIG_USB_VENDOR_ID=0x1d50
67+
CONFIG_USB_DEVICE_ID=0x6177
68+
CONFIG_USB_SERIAL_NUMBER="12345"
69+
CONFIG_CANSERIAL=y
70+
CONFIG_CANBUS=y
71+
CONFIG_CANBUS_FREQUENCY=1000000
72+
CONFIG_CANBUS_FILTER=y
73+
CONFIG_INITIAL_PINS=""
74+
CONFIG_ENABLE_DOUBLE_RESET=y
75+
# CONFIG_ENABLE_BUTTON is not set
76+
CONFIG_ENABLE_LED=y
77+
CONFIG_STATUS_LED_PIN=""
78+
CONFIG_BUILD_DEPLOYER=y
79+
CONFIG_HAVE_CHIPID=y

‎mmu/base/mmu.cfg

+2-1
Original file line numberDiff line numberDiff line change
@@ -4,7 +4,8 @@
44
# This contains aliases for pins for MCU type MMB
55
#
66
[mcu mmu]
7-
serial: /dev/serial/by-id/ERCF-MMU # Config guess. Run ls -l /dev/serial/by-id and set manually # Change to `canbus_uuid: 1234567890` for CANbus setups
7+
canbus_uuid:ae6c4eb969dd
8+
#serial: /dev/serial/by-id/ERCF-MMU # Config guess. Run ls -l /dev/serial/by-id and set manually # Change to `canbus_uuid: 1234567890` for CANbus setups
89

910
# Section to create alias for pins used by MMU for easier integration into Klippain and RatOS.
1011
# The names match those referenced in the mmu_hardware.cfg file. If you get into difficulty

‎printer.cfg

+3-2
Original file line numberDiff line numberDiff line change
@@ -1,5 +1,5 @@
1-
#[include mmu/base/*.cfg]
2-
#[include mmu/optional/client_macros.cfg]
1+
[include mmu/base/*.cfg]
2+
[include mmu/optional/client_macros.cfg]
33

44
# this is for the small displays
55
##[include mmu/optional/mmu_menu.cfg]
@@ -45,6 +45,7 @@ on_error_gcode: CANCEL_PRINT
4545
#[include config-other/skirt-buttons.cfg] # skirt button pcb
4646
#[include config-other/hotkey.cfg] # fysetc skirt button pcb
4747
#[include config-other/stealthburner_led_effects_barf.cfg] # rainbow LED
48+
#[include config-other/stealthburner_led_effects_3_leds.cfg]
4849
[include config-other/stealthburner_leds.cfg] # lenon LED
4950

5051

‎udev-MCU/README.md

+5
Original file line numberDiff line numberDiff line change
@@ -40,6 +40,11 @@ Boards like the Easy BRD board for ERCF.
4040
SUBSYSTEM=="tty",ENV{ID_MODEL_ENC}=="samd21g18a",ENV{ID_USB_VENDOR_ENC}="Klipper",SYMLINK+="serial/by-id/ERCF-EASY-BRD",MODE="0666",GROUP="dialout"
4141
``
4242

43+
#CAN0 rename
44+
#udevadm info -a -p $(udevadm info -q path -p /sys/class/net/can0)| grep serial| head -n 1
45+
# grab serial. replace it below
46+
#SUBSYSTEM=="net", ACTION=="add", ATTRS{serial}=="003700545542500920303939", NAME="MyCan"
47+
4348

4449

4550
save/exit

‎udev-MCU/rules.d/local.rules~

-28
This file was deleted.

0 commit comments

Comments
 (0)