Autocommit from 2023-03-09 10:45:18

Klipper on commit: 4b1536d

Moonraker on commit: 80920dd

Mainsail version: v2.4.1

Author: Ed Street

VOC/enviro-sensor.cfg

@@ -4,20 +4,17 @@
 #  read enviro sensor.  Temp/Pressure/Humidity/VoC
 #####################################################################
 
-#[mcu pico-ENV]
-#serial: /dev/serial/by-id/usb-Klipper_rp2040_DF6114B5C385372F-if00
+[mcu pico_ENV]
+serial: /dev/serial/by-id/usb-Klipper_rp2040_E6605481DB58BB36-if00
+restart_method: command
 
 # SHT31-D is not supported by klipper
-#[temperature_sensor ENV_Chamber]
+#[temperature_sensor SHT31]
 #  sensor_type:SHT31
 #  i2c_address:68      # 0x44 to decimanl = 68
 #  i2c_mcu: rpi
 #  i2c_bus: i2c.1
 
-#[mcu RP_KB]
-#  serial:/dev/serial/by-id/usb-Klipper_rp2040_DF6114B5C385372F-if00
-#  restart_method: command
-
 ############################################################
 
 #[temperature_sensor BME]
@@ -40,26 +37,32 @@
 
 [sgp40]
 
-
-[mcu pico2]
-serial: /dev/serial/by-id/usb-Klipper_rp2040_E6605481DB58BB36-if00
-restart_method: command
-
-
 [temperature_sensor BME680]
 sensor_type: BME280
 i2c_address:119
-i2c_mcu: rpi
-#i2c_bus: i2c0d
-i2c_bus: i2c.1
-i2c_speed: 400000
+i2c_mcu: pico_ENV
+#i2c_bus: i2c.1
+i2c_bus: i2c0d
+#i2c_speed: 400000
+
+
+[temperature_sensor Si7021]
+sensor_type: HTU21D
+i2c_address:64       # 0x40 to decimal = 64.   Si7021
+i2c_mcu: pico_ENV
+#i2c_bus: i2c.1       # STEMMA plug
+i2c_bus: i2c0d
 
 
 [temperature_sensor SGP40]
 sensor_type: SGP40 # Sensor on the top left
-i2c_mcu: pico2
+i2c_mcu: pico_ENV
+#i2c_address:89 # 0x59 to decimal = 89. SGP40
 i2c_bus: i2c0d
 #i2c_bus: i2c.1
 ref_temp_sensor: bme280 BME680
+#ref_temp_sensor: HTU21D si7021 
 ref_humidity_sensor: bme280 BME680
-#i2c_speed: 400000
+#ref_humidity_sensor: HTU21D si7021
+i2c_speed: 400000
+#i2c_speed: 100000 

config/mcu.cfg

@@ -1,6 +1,6 @@
 [mcu]
-  serial:/dev/serial/by-id/usb-Klipper_stm32f446xx_14001A00095053424E363420-if00  # PI-Moon
-  #serial:/dev/serial/by-id/usb-Klipper_stm32f446xx_090038001650335331383520-if00  # CM4-Tofu
+  #serial:/dev/serial/by-id/usb-Klipper_stm32f446xx_14001A00095053424E363420-if00  # PI-Moon
+  serial:/dev/serial/by-id/usb-Klipper_stm32f446xx_090038001650335331383520-if00  # CM4-Tofu
 
 restart_method: command
 

filament-dryer/dehydrator.cfg

@@ -6,11 +6,11 @@
 #
 #####################################################################
 
-#[temperature_sensor Si7021-1]
-#  sensor_type: HTU21D
-#  i2c_address:64       # 0x40 to decimal = 64.   Si7021
-#  i2c_mcu: rpi
-#  i2c_bus: i2c.1       # STEMMA plug
+[temperature_sensor Si7021]
+  sensor_type: HTU21D
+  i2c_address:64       # 0x40 to decimal = 64.   Si7021
+  i2c_mcu: rpi
+  i2c_bus: i2c.1       # STEMMA plug
 
 
 #####################################################################
@@ -23,23 +23,23 @@
 #[temperature_sensor Si7021-2]
 #  sensor_type: HTU21D
 #  i2c_address:64       # 0x40 to decimal = 64.     Si7021
-#  i2c_mcu: pico-ENV
-#  i2c_bus: i2c0d       # STEMMA plug
+#  i2c_mcu: rpi
+#  i2c_bus: i2c.1       # STEMMA plug
 
 
 #[mcu pico-ENV]
 #serial: /dev/serial/by-id/usb-Klipper_rp2040_DF6114B5C385372F-if00
 #restart_method: command # rpi_usb
 
-[mcu pico2]
-serial: /dev/serial/by-id/usb-Klipper_rp2040_E6605481DB58BB36-if00
-restart_method: command
+#[mcu pico2]
+#serial: /dev/serial/by-id/usb-Klipper_rp2040_E6605481DB58BB36-if00
+#restart_method: command
 
-[temperature_sensor BME]
-  sensor_type: BME280
-  i2c_address:119       # 0x40 to decimal = 64.        sensor_type: BME680
-  i2c_mcu: pico2
-  i2c_bus: i2c0d       # STEMMA plug
+#[temperature_sensor BME]
+#  sensor_type: BME280
+#  i2c_address:119       # 0x40 to decimal = 64.        sensor_type: BME680
+#  i2c_mcu: pico2
+#  i2c_bus: i2c0d       # STEMMA plug
 
 [gcode_macro QUERY_DEHYDRATOR]
 gcode:

printer.cfg

@@ -27,7 +27,7 @@
 #[include config-other/klipper_expander.cfg]
 #[include config-other/resonance.cfg]
 
-#[include VOC/enviro-sensor.cfg]    # SGP40 sensor
+[include VOC/enviro-sensor.cfg]    # SGP40 sensor
 #[include VOC/sgp30.cfg]      #SGP30 sensor
 #[include filament-dryer/dehydrator.cfg]    # Si7021 sensor