Skip to content

Commit bddddc4

Browse files
BlackNetBlackNet
committed
Autocommit from 2025-03-19 08:36:23
Klipper on commit: d886c17 Moonraker on commit: ebaa664 Mainsail version: v2.13.2
1 parent e51eb47 commit bddddc4

21 files changed

+674
-26
lines changed

‎.moonraker.conf.bkp

+1
Original file line numberDiff line numberDiff line change
@@ -19,6 +19,7 @@ trusted_clients =
1919
100.71.251.84
2020
100.79.240.92
2121
100.85.109.124
22+
100.119.170.89
2223
FE80::/10
2324
::1/128
2425
cors_domains =

‎crowsnest.conf

+22-2
Original file line numberDiff line numberDiff line change
@@ -41,8 +41,9 @@ enable_rtsp: false # If camera-streamer is used, this enabl
4141
rtsp_port: 8554 # Set different ports for each device!
4242
port: 8080 # HTTP/MJPG Stream/Snapshot Port
4343
device: /dev/video0 # See Log for available ...
44-
resolution: 2560x1472 # widthxheight format
45-
max_fps: 60 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
44+
resolution: 1024x736 # widthxheight format
45+
#resolution: 2560x1472 # widthxheight format
46+
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
4647
#custom_flags: # You can run the Stream Services with custom flags.
4748
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
4849
exposure_auto: 1
@@ -53,3 +54,22 @@ saturation: 120
5354
brightness: 150
5455
v4l2ctl: tilt_absolute=36000, pan_absolute=3600, zoom_absolute=600
5556

57+
[cam 2]
58+
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
59+
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
60+
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
61+
rtsp_port: 8554 # Set different ports for each device!
62+
port: 8081 # HTTP/MJPG Stream/Snapshot Port
63+
device: /dev/video2 # See Log for available ...
64+
resolution: 1024x736 # widthxheight format
65+
#resolution: 2560x1472 # widthxheight format
66+
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
67+
#custom_flags: # You can run the Stream Services with custom flags.
68+
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
69+
exposure_auto: 1
70+
focus_absolute: 40
71+
sharpness: 200
72+
contrast: 130
73+
saturation: 120
74+
brightness: 150
75+
v4l2ctl: tilt_absolute=36000, pan_absolute=3600, zoom_absolute=600

‎klipper_menuconfigs/config-U2C

+3-2
Original file line numberDiff line numberDiff line change
@@ -104,10 +104,11 @@ CONFIG_WANT_THERMOCOUPLE=y
104104
CONFIG_WANT_ADXL345=y
105105
CONFIG_WANT_LIS2DW=y
106106
CONFIG_WANT_MPU9250=y
107-
CONFIG_WANT_LDC1612=y
108-
CONFIG_WANT_SENSOR_ANGLE=y
107+
CONFIG_WANT_ICM20948=y
109108
CONFIG_WANT_HX71X=y
110109
CONFIG_WANT_ADS1220=y
110+
CONFIG_WANT_LDC1612=y
111+
CONFIG_WANT_SENSOR_ANGLE=y
111112
CONFIG_WANT_SOFTWARE_I2C=y
112113
CONFIG_WANT_SOFTWARE_SPI=y
113114
CONFIG_NEED_SENSOR_BULK=y

‎klipper_menuconfigs/config-U2C.old

+126
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,126 @@
1+
CONFIG_LOW_LEVEL_OPTIONS=y
2+
# CONFIG_MACH_AVR is not set
3+
# CONFIG_MACH_ATSAM is not set
4+
# CONFIG_MACH_ATSAMD is not set
5+
# CONFIG_MACH_LPC176X is not set
6+
CONFIG_MACH_STM32=y
7+
# CONFIG_MACH_HC32F460 is not set
8+
# CONFIG_MACH_RPXXXX is not set
9+
# CONFIG_MACH_PRU is not set
10+
# CONFIG_MACH_AR100 is not set
11+
# CONFIG_MACH_LINUX is not set
12+
# CONFIG_MACH_SIMU is not set
13+
CONFIG_BOARD_DIRECTORY="stm32"
14+
CONFIG_MCU="stm32g0b1xx"
15+
CONFIG_CLOCK_FREQ=64000000
16+
CONFIG_FLASH_SIZE=0x20000
17+
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
18+
CONFIG_RAM_START=0x20000000
19+
CONFIG_RAM_SIZE=0x24000
20+
CONFIG_STACK_SIZE=512
21+
CONFIG_FLASH_APPLICATION_ADDRESS=0x8002000
22+
CONFIG_STM32_SELECT=y
23+
# CONFIG_MACH_STM32F103 is not set
24+
# CONFIG_MACH_STM32F207 is not set
25+
# CONFIG_MACH_STM32F401 is not set
26+
# CONFIG_MACH_STM32F405 is not set
27+
# CONFIG_MACH_STM32F407 is not set
28+
# CONFIG_MACH_STM32F429 is not set
29+
# CONFIG_MACH_STM32F446 is not set
30+
# CONFIG_MACH_STM32F765 is not set
31+
# CONFIG_MACH_STM32F031 is not set
32+
# CONFIG_MACH_STM32F042 is not set
33+
# CONFIG_MACH_STM32F070 is not set
34+
# CONFIG_MACH_STM32F072 is not set
35+
# CONFIG_MACH_STM32G070 is not set
36+
# CONFIG_MACH_STM32G071 is not set
37+
# CONFIG_MACH_STM32G0B0 is not set
38+
CONFIG_MACH_STM32G0B1=y
39+
# CONFIG_MACH_STM32G431 is not set
40+
# CONFIG_MACH_STM32G474 is not set
41+
# CONFIG_MACH_STM32H723 is not set
42+
# CONFIG_MACH_STM32H743 is not set
43+
# CONFIG_MACH_STM32H750 is not set
44+
# CONFIG_MACH_STM32L412 is not set
45+
# CONFIG_MACH_N32G452 is not set
46+
# CONFIG_MACH_N32G455 is not set
47+
CONFIG_MACH_STM32G0=y
48+
CONFIG_MACH_STM32G0Bx=y
49+
CONFIG_HAVE_STM32_USBFS=y
50+
CONFIG_HAVE_STM32_FDCANBUS=y
51+
CONFIG_HAVE_STM32_USBCANBUS=y
52+
CONFIG_STM32_DFU_ROM_ADDRESS=0x1fff0000
53+
CONFIG_STM32_FLASH_START_2000=y
54+
# CONFIG_STM32_FLASH_START_0000 is not set
55+
CONFIG_STM32_CLOCK_REF_8M=y
56+
# CONFIG_STM32_CLOCK_REF_12M is not set
57+
# CONFIG_STM32_CLOCK_REF_16M is not set
58+
# CONFIG_STM32_CLOCK_REF_20M is not set
59+
# CONFIG_STM32_CLOCK_REF_24M is not set
60+
# CONFIG_STM32_CLOCK_REF_25M is not set
61+
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
62+
CONFIG_CLOCK_REF_FREQ=8000000
63+
CONFIG_STM32F0_TRIM=16
64+
# CONFIG_STM32_USB_PA11_PA12 is not set
65+
# CONFIG_STM32_SERIAL_USART1 is not set
66+
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
67+
# CONFIG_STM32_SERIAL_USART2 is not set
68+
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
69+
# CONFIG_STM32_SERIAL_USART3 is not set
70+
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
71+
# CONFIG_STM32_SERIAL_USART5 is not set
72+
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
73+
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
74+
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
75+
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
76+
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
77+
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
78+
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
79+
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
80+
CONFIG_STM32_USBCANBUS_PA11_PA12=y
81+
# CONFIG_STM32_CMENU_CANBUS_PB8_PB9 is not set
82+
CONFIG_STM32_CMENU_CANBUS_PB5_PB6=y
83+
# CONFIG_STM32_CMENU_CANBUS_PB12_PB13 is not set
84+
# CONFIG_STM32_CMENU_CANBUS_PD0_PD1 is not set
85+
# CONFIG_STM32_CMENU_CANBUS_PB0_PB1 is not set
86+
# CONFIG_STM32_CMENU_CANBUS_PD12_PD13 is not set
87+
# CONFIG_STM32_CMENU_CANBUS_PC2_PC3 is not set
88+
CONFIG_STM32_CANBUS_PB5_PB6=y
89+
CONFIG_USBCANBUS=y
90+
CONFIG_USB=y
91+
CONFIG_USB_VENDOR_ID=0x1d50
92+
CONFIG_USB_DEVICE_ID=0x614e
93+
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
94+
CONFIG_USB_SERIAL_NUMBER="12345"
95+
96+
#
97+
# USB ids
98+
#
99+
# end of USB ids
100+
101+
CONFIG_WANT_GPIO_BITBANGING=y
102+
CONFIG_WANT_DISPLAYS=y
103+
CONFIG_WANT_THERMOCOUPLE=y
104+
CONFIG_WANT_ADXL345=y
105+
CONFIG_WANT_LIS2DW=y
106+
CONFIG_WANT_MPU9250=y
107+
CONFIG_WANT_LDC1612=y
108+
CONFIG_WANT_SENSOR_ANGLE=y
109+
CONFIG_WANT_HX71X=y
110+
CONFIG_WANT_ADS1220=y
111+
CONFIG_WANT_SOFTWARE_I2C=y
112+
CONFIG_WANT_SOFTWARE_SPI=y
113+
CONFIG_NEED_SENSOR_BULK=y
114+
CONFIG_CANBUS=y
115+
CONFIG_CANBUS_FREQUENCY=1000000
116+
CONFIG_INITIAL_PINS=""
117+
CONFIG_HAVE_GPIO=y
118+
CONFIG_HAVE_GPIO_ADC=y
119+
CONFIG_HAVE_GPIO_SPI=y
120+
CONFIG_HAVE_GPIO_I2C=y
121+
CONFIG_HAVE_GPIO_HARD_PWM=y
122+
CONFIG_HAVE_STRICT_TIMING=y
123+
CONFIG_HAVE_CHIPID=y
124+
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
125+
CONFIG_HAVE_BOOTLOADER_REQUEST=y
126+
CONFIG_INLINE_STEPPER_HACK=y

‎klipper_menuconfigs/config-ebb2209-rpi

+1
Original file line numberDiff line numberDiff line change
@@ -49,6 +49,7 @@ CONFIG_WANT_THERMOCOUPLE=y
4949
CONFIG_WANT_ADXL345=y
5050
CONFIG_WANT_LIS2DW=y
5151
CONFIG_WANT_MPU9250=y
52+
CONFIG_WANT_ICM20948=y
5253
CONFIG_WANT_HX71X=y
5354
CONFIG_WANT_ADS1220=y
5455
CONFIG_WANT_LDC1612=y

‎klipper_menuconfigs/config-ebb2209-rpi.old

+73
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,73 @@
1+
CONFIG_LOW_LEVEL_OPTIONS=y
2+
# CONFIG_MACH_AVR is not set
3+
# CONFIG_MACH_ATSAM is not set
4+
# CONFIG_MACH_ATSAMD is not set
5+
# CONFIG_MACH_LPC176X is not set
6+
# CONFIG_MACH_STM32 is not set
7+
# CONFIG_MACH_HC32F460 is not set
8+
CONFIG_MACH_RPXXXX=y
9+
# CONFIG_MACH_PRU is not set
10+
# CONFIG_MACH_AR100 is not set
11+
# CONFIG_MACH_LINUX is not set
12+
# CONFIG_MACH_SIMU is not set
13+
CONFIG_BOARD_DIRECTORY="rp2040"
14+
CONFIG_MCU="rp2040"
15+
CONFIG_CLOCK_FREQ=12000000
16+
CONFIG_FLASH_SIZE=0x200000
17+
CONFIG_FLASH_BOOT_ADDRESS=0x10000100
18+
CONFIG_RAM_START=0x20000000
19+
CONFIG_RAM_SIZE=0x42000
20+
CONFIG_STACK_SIZE=512
21+
CONFIG_FLASH_APPLICATION_ADDRESS=0x10004000
22+
CONFIG_RPXXXX_SELECT=y
23+
CONFIG_MACH_RP2040=y
24+
# CONFIG_MACH_RP2350 is not set
25+
CONFIG_RPXXXX_HAVE_BOOTLOADER=y
26+
# CONFIG_RPXXXX_FLASH_START_0100 is not set
27+
CONFIG_RPXXXX_FLASH_START_4000=y
28+
CONFIG_RP2040_STAGE2_FILE="boot2_w25q080.S"
29+
CONFIG_RP2040_STAGE2_CLKDIV=2
30+
# CONFIG_RPXXXX_USB is not set
31+
# CONFIG_RPXXXX_SERIAL_UART0_PINS_0_1 is not set
32+
# CONFIG_RPXXXX_SERIAL_UART0_PINS_12_13 is not set
33+
# CONFIG_RPXXXX_SERIAL_UART0_PINS_16_17 is not set
34+
# CONFIG_RPXXXX_SERIAL_UART0_PINS_28_29 is not set
35+
# CONFIG_RPXXXX_SERIAL_UART1_PINS_4_5 is not set
36+
# CONFIG_RPXXXX_SERIAL_UART1_PINS_8_9 is not set
37+
# CONFIG_RPXXXX_SERIAL_UART1_PINS_20_21 is not set
38+
# CONFIG_RPXXXX_SERIAL_UART1_PINS_24_25 is not set
39+
CONFIG_RPXXXX_CANBUS=y
40+
# CONFIG_RPXXXX_USBCANBUS is not set
41+
CONFIG_RPXXXX_CANBUS_GPIO_RX=4
42+
CONFIG_RPXXXX_CANBUS_GPIO_TX=5
43+
CONFIG_USB_VENDOR_ID=0x1d50
44+
CONFIG_USB_DEVICE_ID=0x614e
45+
CONFIG_USB_SERIAL_NUMBER="12345"
46+
CONFIG_WANT_GPIO_BITBANGING=y
47+
CONFIG_WANT_DISPLAYS=y
48+
CONFIG_WANT_THERMOCOUPLE=y
49+
CONFIG_WANT_ADXL345=y
50+
CONFIG_WANT_LIS2DW=y
51+
CONFIG_WANT_MPU9250=y
52+
CONFIG_WANT_HX71X=y
53+
CONFIG_WANT_ADS1220=y
54+
CONFIG_WANT_LDC1612=y
55+
CONFIG_WANT_SENSOR_ANGLE=y
56+
CONFIG_WANT_SOFTWARE_I2C=y
57+
CONFIG_WANT_SOFTWARE_SPI=y
58+
CONFIG_NEED_SENSOR_BULK=y
59+
CONFIG_CANSERIAL=y
60+
CONFIG_CANBUS=y
61+
CONFIG_CANBUS_FREQUENCY=1000000
62+
CONFIG_CANBUS_FILTER=y
63+
CONFIG_INITIAL_PINS=""
64+
CONFIG_HAVE_GPIO=y
65+
CONFIG_HAVE_GPIO_ADC=y
66+
CONFIG_HAVE_GPIO_SPI=y
67+
CONFIG_HAVE_GPIO_I2C=y
68+
CONFIG_HAVE_GPIO_HARD_PWM=y
69+
CONFIG_HAVE_STRICT_TIMING=y
70+
CONFIG_HAVE_CHIPID=y
71+
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
72+
CONFIG_HAVE_BOOTLOADER_REQUEST=y
73+
CONFIG_INLINE_STEPPER_HACK=y

‎klipper_menuconfigs/config-octopus-446

+3-2
Original file line numberDiff line numberDiff line change
@@ -94,10 +94,11 @@ CONFIG_WANT_THERMOCOUPLE=y
9494
CONFIG_WANT_ADXL345=y
9595
CONFIG_WANT_LIS2DW=y
9696
CONFIG_WANT_MPU9250=y
97-
CONFIG_WANT_LDC1612=y
98-
CONFIG_WANT_SENSOR_ANGLE=y
97+
CONFIG_WANT_ICM20948=y
9998
CONFIG_WANT_HX71X=y
10099
CONFIG_WANT_ADS1220=y
100+
CONFIG_WANT_LDC1612=y
101+
CONFIG_WANT_SENSOR_ANGLE=y
101102
CONFIG_WANT_SOFTWARE_I2C=y
102103
CONFIG_WANT_SOFTWARE_SPI=y
103104
CONFIG_NEED_SENSOR_BULK=y

‎klipper_menuconfigs/config-octopus-446.old

+116
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,116 @@
1+
CONFIG_LOW_LEVEL_OPTIONS=y
2+
# CONFIG_MACH_AVR is not set
3+
# CONFIG_MACH_ATSAM is not set
4+
# CONFIG_MACH_ATSAMD is not set
5+
# CONFIG_MACH_LPC176X is not set
6+
CONFIG_MACH_STM32=y
7+
# CONFIG_MACH_HC32F460 is not set
8+
# CONFIG_MACH_RPXXXX is not set
9+
# CONFIG_MACH_PRU is not set
10+
# CONFIG_MACH_AR100 is not set
11+
# CONFIG_MACH_LINUX is not set
12+
# CONFIG_MACH_SIMU is not set
13+
CONFIG_BOARD_DIRECTORY="stm32"
14+
CONFIG_MCU="stm32f446xx"
15+
CONFIG_CLOCK_FREQ=180000000
16+
CONFIG_USBSERIAL=y
17+
CONFIG_FLASH_SIZE=0x80000
18+
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
19+
CONFIG_RAM_START=0x20000000
20+
CONFIG_RAM_SIZE=0x20000
21+
CONFIG_STACK_SIZE=512
22+
CONFIG_FLASH_APPLICATION_ADDRESS=0x8008000
23+
CONFIG_STM32_SELECT=y
24+
# CONFIG_MACH_STM32F103 is not set
25+
# CONFIG_MACH_STM32F207 is not set
26+
# CONFIG_MACH_STM32F401 is not set
27+
# CONFIG_MACH_STM32F405 is not set
28+
# CONFIG_MACH_STM32F407 is not set
29+
# CONFIG_MACH_STM32F429 is not set
30+
CONFIG_MACH_STM32F446=y
31+
# CONFIG_MACH_STM32F765 is not set
32+
# CONFIG_MACH_STM32F031 is not set
33+
# CONFIG_MACH_STM32F042 is not set
34+
# CONFIG_MACH_STM32F070 is not set
35+
# CONFIG_MACH_STM32F072 is not set
36+
# CONFIG_MACH_STM32G070 is not set
37+
# CONFIG_MACH_STM32G071 is not set
38+
# CONFIG_MACH_STM32G0B0 is not set
39+
# CONFIG_MACH_STM32G0B1 is not set
40+
# CONFIG_MACH_STM32G431 is not set
41+
# CONFIG_MACH_STM32G474 is not set
42+
# CONFIG_MACH_STM32H723 is not set
43+
# CONFIG_MACH_STM32H743 is not set
44+
# CONFIG_MACH_STM32H750 is not set
45+
# CONFIG_MACH_STM32L412 is not set
46+
# CONFIG_MACH_N32G452 is not set
47+
# CONFIG_MACH_N32G455 is not set
48+
CONFIG_MACH_STM32F4=y
49+
CONFIG_HAVE_STM32_USBOTG=y
50+
CONFIG_HAVE_STM32_CANBUS=y
51+
CONFIG_HAVE_STM32_USBCANBUS=y
52+
CONFIG_STM32_DFU_ROM_ADDRESS=0x1fff0000
53+
CONFIG_STM32_FLASH_START_8000=y
54+
# CONFIG_STM32_FLASH_START_10000 is not set
55+
# CONFIG_STM32_FLASH_START_0000 is not set
56+
# CONFIG_STM32_CLOCK_REF_8M is not set
57+
CONFIG_STM32_CLOCK_REF_12M=y
58+
# CONFIG_STM32_CLOCK_REF_16M is not set
59+
# CONFIG_STM32_CLOCK_REF_20M is not set
60+
# CONFIG_STM32_CLOCK_REF_24M is not set
61+
# CONFIG_STM32_CLOCK_REF_25M is not set
62+
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
63+
CONFIG_CLOCK_REF_FREQ=12000000
64+
CONFIG_STM32F0_TRIM=16
65+
CONFIG_STM32_USB_PA11_PA12=y
66+
# CONFIG_STM32_SERIAL_USART1 is not set
67+
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
68+
# CONFIG_STM32_SERIAL_USART2 is not set
69+
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
70+
# CONFIG_STM32_SERIAL_USART3 is not set
71+
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
72+
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
73+
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
74+
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
75+
# CONFIG_STM32_MMENU_CANBUS_PI9_PH13 is not set
76+
# CONFIG_STM32_MMENU_CANBUS_PB5_PB6 is not set
77+
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
78+
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
79+
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
80+
CONFIG_USB=y
81+
CONFIG_USB_VENDOR_ID=0x1d50
82+
CONFIG_USB_DEVICE_ID=0x614e
83+
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
84+
CONFIG_USB_SERIAL_NUMBER="12345"
85+
86+
#
87+
# USB ids
88+
#
89+
# end of USB ids
90+
91+
CONFIG_WANT_GPIO_BITBANGING=y
92+
CONFIG_WANT_DISPLAYS=y
93+
CONFIG_WANT_THERMOCOUPLE=y
94+
CONFIG_WANT_ADXL345=y
95+
CONFIG_WANT_LIS2DW=y
96+
CONFIG_WANT_MPU9250=y
97+
CONFIG_WANT_LDC1612=y
98+
CONFIG_WANT_SENSOR_ANGLE=y
99+
CONFIG_WANT_HX71X=y
100+
CONFIG_WANT_ADS1220=y
101+
CONFIG_WANT_SOFTWARE_I2C=y
102+
CONFIG_WANT_SOFTWARE_SPI=y
103+
CONFIG_NEED_SENSOR_BULK=y
104+
CONFIG_CANBUS_FREQUENCY=1000000
105+
CONFIG_INITIAL_PINS=""
106+
CONFIG_HAVE_GPIO=y
107+
CONFIG_HAVE_GPIO_ADC=y
108+
CONFIG_HAVE_GPIO_SPI=y
109+
CONFIG_HAVE_GPIO_SDIO=y
110+
CONFIG_HAVE_GPIO_I2C=y
111+
CONFIG_HAVE_GPIO_HARD_PWM=y
112+
CONFIG_HAVE_STRICT_TIMING=y
113+
CONFIG_HAVE_CHIPID=y
114+
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
115+
CONFIG_HAVE_BOOTLOADER_REQUEST=y
116+
CONFIG_INLINE_STEPPER_HACK=y

0 commit comments

Comments
 (0)