Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

 2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

 5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

 6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

 9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...

Author: torvalds

Documentation/bpf/prog_cgroup_sockopt.rst

@@ -86,6 +86,20 @@ then the next program in the chain (A) will see those changes,
 *not* the original input ``setsockopt`` arguments. The potentially
 modified values will be then passed down to the kernel.
 
+Large optval
+============
+When the ``optval`` is greater than the ``PAGE_SIZE``, the BPF program
+can access only the first ``PAGE_SIZE`` of that data. So it has to options:
+
+* Set ``optlen`` to zero, which indicates that the kernel should
+  use the original buffer from the userspace. Any modifications
+  done by the BPF program to the ``optval`` are ignored.
+* Set ``optlen`` to the value less than ``PAGE_SIZE``, which
+  indicates that the kernel should use BPF's trimmed ``optval``.
+
+When the BPF program returns with the ``optlen`` greater than
+``PAGE_SIZE``, the userspace will receive ``EFAULT`` errno.
+
 Example
 =======
 

Documentation/networking/ieee802154.rst

@@ -30,8 +30,8 @@ Socket API
 
 The address family, socket addresses etc. are defined in the
 include/net/af_ieee802154.h header or in the special header
-in the userspace package (see either http://wpan.cakelab.org/ or the
-git tree at https://github.com/linux-wpan/wpan-tools).
+in the userspace package (see either https://linux-wpan.org/wpan-tools.html
+or the git tree at https://github.com/linux-wpan/wpan-tools).
 
 6LoWPAN Linux implementation
 ============================

MAINTAINERS

@@ -8333,7 +8333,7 @@ M:	Alexander Aring <[email protected]>
 M:	Stefan Schmidt <[email protected]>
 L:	[email protected]
 S:	Maintained
-W:	http://wpan.cakelab.org/
+W:	https://linux-wpan.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next.git
 F:	Documentation/networking/ieee802154.rst
@@ -10808,7 +10808,7 @@ F:	Documentation/devicetree/bindings/dma/mtk-*
 F:	drivers/dma/mediatek/
 
 MEDIATEK ETHERNET DRIVER
-M:	Felix Fietkau <nbd@openwrt.org>
+M:	Felix Fietkau <nbd@nbd.name>
 M:	John Crispin <[email protected]>
 M:	Sean Wang <[email protected]>
 M:	Mark Lee <[email protected]>

drivers/net/bareudp.c

@@ -572,6 +572,9 @@ static int bareudp2info(struct nlattr *data[], struct bareudp_conf *conf,
 	if (data[IFLA_BAREUDP_SRCPORT_MIN])
 		conf->sport_min =  nla_get_u16(data[IFLA_BAREUDP_SRCPORT_MIN]);
 
+	if (data[IFLA_BAREUDP_MULTIPROTO_MODE])
+		conf->multi_proto_mode = true;
+
 	return 0;
 }
 

drivers/net/dsa/bcm_sf2.c

@@ -1147,6 +1147,8 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 	set_bit(0, priv->cfp.used);
 	set_bit(0, priv->cfp.unique);
 
+	/* Balance of_node_put() done by of_find_node_by_name() */
+	of_node_get(dn);
 	ports = of_find_node_by_name(dn, "ports");
 	if (ports) {
 		bcm_sf2_identify_ports(priv, ports);