Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

heat set inserts #1

Open
rob911sc opened this issue Nov 5, 2021 · 2 comments
Open

heat set inserts #1

rob911sc opened this issue Nov 5, 2021 · 2 comments

Comments

@rob911sc
Copy link

rob911sc commented Nov 5, 2021

There is no guide or pictures on where the heat set inserts go.
@KurioHonoo
Copy link

It also does not specify the heatset insert size used. If you are coming from the land of Voron then you're likely going to have heatsets that are larger than what the Sailfin was designed for. I believe 4.7mm are used, could be wrong.

@bob-u
Copy link

bob-u commented Dec 25, 2021

This extruder design works great and assembly was easy. Basically all blind holes need inserts. You can download STEP file from here and open it with STEP viewer to see the assembly. The inserts are 4.6mm, as I had 4.1...I glued mine :)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@KurioHonoo @bob-u @rob911sc