A server to control the B25 range of wifi Smart Sockets
While building a home automation system I bought a couple of Orvibo smart sockets from ebay that were advertised as the S20 model. When they arrived they were actually the B25 (AUS) version and I could not find any node libraries to control them.
After a bit of searching, reading research by other people and some time with Wireshark I manged to setup a relay server that would decrypt the packets going back and forth between the sockets and the server and worked out the protocol.
After that I created this project which is basically a server that the Orvibo sockets connect to instead of the actual one. Once the sockets have connected you can toggle them on and off
To run this server you will need to have Node.js installed. I run v6.11.0 but it may work with earlier versions.
You will need to add the Orvibo PK key to decrypt and encrypt the initial packets. You can find this using helpful bash script from Grayda getKey.sh (you may have to add www to to url to make it work)
Once you have this key you will need to add it the OrviboSettings.js file or you can pass it into as part of the settings object when you create the orvibo server object.
For each socket on your network you will need to add its MAC address (colons removed and lower cased) to the plugInfo array as a uid and give it a name field for easier identification.
You can see this in the Example.js file
// Create a settings object to pass PK key and map sockets to names
const settings = {
LOG_PACKET: false, //Show incoming packet data from the socket
ORVIBO_KEY: '', // put your PK key here as plain text (See Readme)
plugInfo : [
// Add uid and a name so you can easily identify the connected sockets
{
uid :'53dd7fe74de7',
name: "Lamp in Kitchen"
},
],
};
let orvibo = new Orvibo(settings);
Because these new sockets don't use UDP packets to communicate like the older versions you will also need to redirect all traffic from the host name homemate.orvibo.com
on TCP port 10001 the computer running the server.
I used an Ubuntu machine running dnsmasq and set this server as my DNS server in my router but depending on your network you might have to do it differently. Most routers will let you modify your DNS settings under the WAN settings.
Make sure to set a static IP address to the computer that will be running the Ubuntu server (In following example, the ip of machine running this server is at 192.168.0.106)
server=8.8.8.8
address=/homemate.orvibo.com/192.168.0.106
To confirm your dnsmasq is working, when visiting homemate.orvibo.com:10001 from your browser the server should return a response.
You will know things are working when you hit the server in your browser (for Example.js this would be http://localhost:3000) and start seeing your sockets in the array.
Just a note: If you try to add a socket after you've redirected the DNS you will be ale to setup WiFi and use it with this library but your phone will probably timeout when trying to add the device to the official Orvibo server.
From Github
Clone the repo and then run
npm install
to install the dependencies (buffer-crc32)
or from npm just run
npm i orvibo-b25-server
The best way to see how to use this library is to see Example.js
To start the example http server run
npm start
This will start the Orvibo socket server create a basic example HTTP server used for interacting with sockets. Calling this http server with no parameters will return the uid, state or the switch, modelId and name of the socket.
You can then use the uid to toggle the state of the switch like http://localhost:3000?uid=5dcf7ff76e7a
One thing to note is the Orvibo uses 1 as off and 0 as on for the socket state.
Once you've got a socket connecting to the official app you can add it to the plugInfo array in the OrviboSettings.js or to your settings object you pass in. This will match to uid to a name so you can easily see which socket is which.
A list of Orvibo devices, confirmed by contributors, that work with this project:
| Device Name | Product ID | Confirmed By |
|---|---|---|
| Orvibo Smart Socket (EU/AUS) | B25 | @sandysound |
| Orvibo Smart Socket (US/CAD) | S25 | @wichopy |
| Orvibo Smart Socket (UK/GB) | B25UK | @valchonedelchev |
I'm more than happy for other people to contribute to this library just send a pull request.
This project will probably work with other versions of the smart sockets that use the homemate app. If you manage to get it working let me know so I can add it here as supported.
Also if you'd like to contribute to help me buy additional Orvibo products to add to this server or the software has helped you in your own home automation projects and you just want to buy me a beer. You can sponsor it via my paypal account at http://paypal.me/sandysounds
- Sandy Milne - SandySound - Github
This project is licensed under the Apache 2.0 License - see the LICENSE.md file for details
Big thanks to Grayda and insertjokehere for all their research and hard work into how these sockets work