DUAL SAME COORDINATOR as a BACKUP

[cosimobernicchi]

Good morning!
I have a question, i had a very strong network than my coordinator stopped working and i could't find a way to reanimate it. So i bought a new coordinator a lan SLZB-06 and repaired all my device after the initial conf. Now a got a strong network again. My question is: if i buy another coordinator SLZB-06, i give it the same network address, flash it with the same iee coordinator address of the first, in the case of an hardware failure of the first, can i simply turn it on and everything will work?? Just simply as turn the first off and the second on? Thank you very much

[chris-1243]

If they have the same IEEE address (same chip as well to use the coordinator_backup.json) yes, this should work. Turn off completely the first coordinator (no power), plug the backup, check in your case the IP address and you should be good.

What I learnt from USB coordinator, the backup coordinator should be empty. Which means no network data on it. This might be done by erasing the NVRAM or flash a new firmware.

The network will be re-created using the coordinator_backup.json.

It is like migrating from a new coordinator