HXstomp_Midi

Banks and Functions

Bank		0
Description		Snapshot Mode
On Bank Enter		Stomp to Stomp mode
Button	A	B	C
Short Press	Snapshot 1	Snapshot 2	Snapshot 3
Long Press	FS Mode Up	Boost CC 100	Bank Up

Bank		1
Description		Tap/Tuner
On Bank Enter		Stomp to Snap mode
Button	A	B	C
Short Press	Toggle tuner	Tap Tempo	Toggle Bypass
Long Press	FS Mode Up	Boost CC 100	Bank Up

Bank		2
Description		FS Mode
On Bank Enter		Stomp to Snap mode
Button	A	B	C
Short Press	FS4	FS5	Toggle CC 101
Long Press	FS Mode Up	Boost CC 100	Bank Up

Bank		3
Description		Looper Mode
On Bank Enter		Stomp to Snap mode
Button	A	B	C
Short Press	Rec/OverD	Play/Stop	Undo/Redo
Long Press	FS Mode Up	Boost CC 100	Bank Up

Enable / Disable Banks Completely

Banks 1, 2, and 3 can be enabled/disabled during startup

As soon as the LED is white, long pressing the buttons A,B, and/or C toggles availability of banks 1,2, and/or 3 respectively
After the white LED turn of all activated Bank colors are shown once, before Bank 0 is activated
The bank state (enabled / disabled) is preserved

Looper

During Operation:

LED flashing fast during recording / overdubbing
LED flashing slow during playback

Routing Layout

WATCH OUT: WS2812B LED will only work correctly with 5V, so select the appropriate board, use an additional power regulator or another LED Setup.