diff --git a/ThingsForTheSpace/HappyToHelpBadge/HappyToHelp.ecp b/ThingsForTheSpace/HappyToHelpBadge/HappyToHelp.ecp new file mode 100644 index 0000000..6598a3b Binary files /dev/null and b/ThingsForTheSpace/HappyToHelpBadge/HappyToHelp.ecp differ diff --git a/ThingsForTheSpace/HappyToHelpBadge/happytohelp002.svg b/ThingsForTheSpace/HappyToHelpBadge/happytohelp002.svg new file mode 100644 index 0000000..17970a8 --- /dev/null +++ b/ThingsForTheSpace/HappyToHelpBadge/happytohelp002.svg @@ -0,0 +1,182 @@ + + + +iNSTRUCTIONS:- sAVE AS dxf v14 WITH POLYLINES- iMPORT INTO LASER CUTTER SOFTWARE- uNITE LINES- sORT OUT COLOURS AND ETCHING- - FULL CUT ON MOST- - sHALLOW CUT ON m AND MAKESPACE- - eTCH ON THE DETACHED s- mOVE THE ETCH "s" PART WITH THE ARROW KEYS INTO POSITION (EXACTLY 20MM UP)- dELETE THIS TEXT- cUT! diff --git a/ThingsForTheSpace/HappyToHelpBadge/readme.md b/ThingsForTheSpace/HappyToHelpBadge/readme.md new file mode 100644 index 0000000..28049f6 --- /dev/null +++ b/ThingsForTheSpace/HappyToHelpBadge/readme.md @@ -0,0 +1,5 @@ +Happy to help badge. + +SVG is the source doc and instructions + +ECP file is ready to load into the laser cutter software and cut (the cut speed for the outline may need adjusting) diff --git a/ThingsForTheSpace/readme.md b/ThingsForTheSpace/readme.md new file mode 100644 index 0000000..bd7ce83 --- /dev/null +++ b/ThingsForTheSpace/readme.md @@ -0,0 +1,5 @@ +**Stuff for the space** + +Badges, 3d prints, etc. + +This is a temporary home for such things until there is a "stuff for the space" repo at the top level.