This enclosure is perfect during the development phase.
The 3D design files can be found in the 3D-Design folder.
Available formats:
- Fusion 360 (.f3z)
- Object format (.obj)
- Sketchup format (.skp)
- SMT format (.smt)
- Step format (.step)
Exported STL files for loading into your slicer are in the STL folder.
For a longer lasting solution, an additional design that uses screws to keep the enclosure modules together, can be found in the Screw-Version folder.
The WisBlock carrier case gives easy access to all Sensor and IO slots, and at the same time, keeps your WisBlock protected.
The carrier case is big enough to hold your WisBlock Base and the largest WisBlock IO modules.
It allows easy access to the Sensor slots located at the bottom of the WisBlock Base.
For battery powered solutions, you can choose between two different battery clip-on cases: One for an 18650 battery and a smaller one for a flat Li-Ion battery.
The WisBlock base carrier has an opening guide for battery wires. This allows connection from the battery case to the carrier case.
For outdoor tests, a clip-on lid is available.
The lid allows easy access to the USB port. A small opening is also made to see the on-board LEDs.
 |
 |
|---|
If you are using external sensors connected to a WisBlock IO module, a small opening in the lid allow wires to exit from the enclosure.
