Kubernetes

Description

This module installs and configures Kubernetes which is an open-source system for automating deployment, scaling, and management of containerized applications. For efficient management and discovery, containers that make up an application are grouped into logical units.

To bootstrap a Kubernetes cluster in a secure and extensible way, this module uses the kubeadm toolkit.

Setup

Install this module, generate the configuration, add the OS and hostname yaml files to Hiera, and configure your node.

Included in this module is Kubetool, a configuration tool that auto-generates the Hiera security parameters, the discovery token hash, and other configurations for your Kubernetes cluster. To simplify installation and use, the tool is available as a Docker image.

Generating the module configuration

If Docker is not installed on your workstation, install it from here.

The Kubetool Docker image takes each parameter as an environment variable.

Note:: The version of Kubetool you use must match the version of the module on the Puppet Forge. For example, if using the module version 1.0.0, use puppet/kubetool:1.0.0.

To output a yaml file into your working directory that corresponds to the operating system you want Kubernetes to run on, and for each controller node, run either of these docker run commands:

docker run --rm -v $(pwd):/mnt --env-file env puppet/kubetool:{$module_version}

The docker run command above includes an env file which is included in the root folder of this repo.

docker run --rm -v $(pwd):/mnt -e OS=ubuntu -e VERSION=1.10.2 -e CONTAINER_RUNTIME=docker -e CNI_PROVIDER=cilium -e CNI_PROVIDER_VERSION=1.4.3 -e ETCD_INITIAL_CLUSTER=kube-control-plane:172.17.10.101,kube-replica-control-plane-01:172.17.10.210,kube-replica-control-plane-02:172.17.10.220 -e ETCD_IP="%{networking.ip}" -e KUBE_API_ADVERTISE_ADDRESS="%{networking.ip}" -e INSTALL_DASHBOARD=true puppet/kubetool:{$module-version}

The above parameters are:

OS: The operating system Kubernetes runs on.
VERSION: The version of Kubernetes to deploy. Must follow X.Y.Z format. (Check kubeadm regex rule for more information)
CONTAINER_RUNTIME: The container runtime Kubernetes uses. Set this value to docker (officially supported) or cri_containerd. Advanced Kubernetes users can use cri_containerd, however this requires an increased understanding of Kubernetes, specifically when running applications in a HA cluster. To run a HA cluster and access your applications, an external load balancer is required in front of your cluster. Setting this up is beyond the scope of this module. For more information, see the Kubernetes documentation.
CNI_PROVIDER: The CNI network to install. Set this value to weave, flannel, calico or cilium.
CNI_PROVIDER_VERSION The CNI version to use. calico and cilium uses this variable to reference the correct deployment file. Current version cilium is 1.4.3, calico is 3.18
ETCD_INITIAL_CLUSTER: The server hostnames and IPs in the form of hostname:ip. When in production, include three, five, or seven nodes for etcd.
ETCD_IP: The IP each etcd member listens on. We recommend passing the fact for the interface to be used by the cluster.
KUBE_API_ADVERTISE_ADDRESS: The IP each etcd/apiserver instance uses on each controller. We recommend passing the fact for the interface to be used by the cluster.
INSTALL_DASHBOARD: A boolean which specifies whether to install the dashboard.

Kubetool creates:

A yaml file that corresponds to the operating system specified by the OS parameter. To view the file contents, run cat Debian.yaml for a Debian system, or run cat RedHat.yaml for RedHat. The yaml files produced for each member of the etcd cluster contain certificate information to bootstrap an initial etcd cluster. Ensure these are also placed in your hieradata directory at the node level.
A discovery token hash and encoded values required by Kubernetes. To regenerate the values, including certificates and tokens, run the kubetool command again.

Adding the `{$OS}.yaml` and `{$hostname}.yaml` files to Hiera

Add the {$OS}.yaml file to the same control repo where your Hiera data is, usually the data directory. By leveraging location facts, such as the pp_datacenter trusted fact, each cluster can be allocated its own configuration.

Possible Error fetching hiera data

If the below error is encounterd

Error: Could not retrieve catalog from remote server: Error 500 on SERVER: Server Error: Evaluation Error: Error while evaluating a Resource Statement, Class[Kubernetes]:
  parameter 'api_server_count' expects an Integer value, got Undef
  parameter 'token' expects a String value, got Undef
  parameter 'discovery_token_hash' expects a String value, got Undef (file: /etc/puppetlabs/code/environments/production/manifests/site.pp, line: 138, column: 3) on node xxx.example.local

It means that hiera is not getting the values from the associated yaml files stored in the data folder so it sets some of the required values as Undefined.

Check your hiera.yaml file and ensure that it contains entries for {OS}.yaml and {$hostname}.yaml

hierarchy:
  - name: "Family"
    path: Debian.yaml
  - name: "Host"
    path: xxx.example.local.yaml

Configuring your node

After the {$OS}.yaml and {$hostname}.yaml files have been added to the Hiera directory on your Puppet server, configure your node as the controller or worker.

A controller node contains the control plane and etcd. In a production cluster, you should have three, five, or seven controllers. A worker node runs your applications. You can add as many worker nodes as Kubernetes can handle. For information about nodes in Kubernetes, see the Kubernetes documentation.

Note: A node cannot be a controller and a worker. It must be one or the other.

To make a node a controller, add the following code to the manifest:

class {'kubernetes':
  controller => true,
}

To make a node a worker, add the following code to the manifest:

class {'kubernetes':
  worker => true,
}

Installing Kubernetes on different OS

Currently, puppetlab-kubernetes is compatible with Ubuntu Xenial. For different OS, below parameters can be assigned.

For instance, installing kubernetes version 1.20.0 on Debian buster

# Docker repo and key as documented in
# https://docs.docker.com/install/linux/docker-ce/debian/
  docker_apt_location => 'https://download.docker.com/linux/debian',
  docker_apt_repos    => 'stable',
  docker_apt_release  => 'buster',
  docker_key_id       => '9DC858229FC7DD38854AE2D88D81803C0EBFCD88',
  docker_key_source   => 'https://download.docker.com/linux/debian/gpg',
# Different available version can be found by apt-cache madison docker-ce
  docker_version => '5:20.10.5~3-0~debian-buster',
  docker_package_name => 'docker-ce',
# Kubernetes Version
  kubernetes_version  => '1.20.0',

Validating and unit testing the module

This module is compliant with the Puppet Development Kit (PDK), which provides tools to help run unit tests on the module and validate the modules's metadata, syntax, and style.

Note: To run static validations and unit tests against this module using the pdk validate and pdk test unit commands, you must have Puppet 5 or higher installed. In the following examples we have specified Puppet 5.3.6.

To validate the metadata.json file, run the following command:

pdk validate metadata --puppet-version='5.3.6'

To validate the Puppet code and syntax, run the following command:

pdk validate puppet --puppet-version='5.3.6'

Note: The pdk validate ruby command ignores the excluded directories specified in the .rubocop.yml file. Therefore, to validate the Ruby code style and syntax you must specify the directory the code exists in.

In the following example we validate the Ruby code contained in the lib directory:

pdk validate ruby lib --puppet-version='5.3.6'

To unit test the module, run the following command:

pdk test unit --puppet-version='5.3.6'

Reference

Classes

Public classes

kubernetes

Private classes

kubernetes::cluster_roles
kubernetes::config
kubernetes::kube_addons
kubernetes::packages
kubernetes::repos
kubernetes::service

Defined types

kubernetes::kubeadm_init
kubernetes::kubeadm_join

Parameters

The following parameters are available in the kubernetes class.

`apiserver_cert_extra_sans`

A string array of Subject Alternative Names for the API server certificates.

Defaults to [].

`apiserver_extra_arguments`

A string array of extra arguments passed to the API server.

Defaults to [].

`apiserver_extra_volumes`

A hash of extra volumes mounts mounted on the API server.

For example,

apiserver_extra_volumes => {
  'volume-name' => {
    hostPath  => '/data',
    mountPath => '/data',
    readOnly: => 'false',
    pathType: => 'DirectoryOrCreate'
  },
}

Defaults to {}.

`cloud_provider`

The name of the cloud provider configured in /etc/kubernetes/cloud-config.

Note: This file is not managed within this module and must be present before bootstrapping the Kubernetes controller.

Defaults to undef.

`cloud_config`

The location of the cloud config file used by cloud_provider. For use with v1.12 and above.

Note: This file is not managed within this module and must be present before bootstrapping the Kubernetes controller.

Defaults to undef.

`cni_network_provider`

The URL to get the CNI providers yaml file. kube_tool sets this value.

Defaults to undef.

`cni_rbac_binding`

The download URL for the cni providers rbac rules. Only for use with Calico.

Defaults to undef.

`cni_pod_cidr`

Specifies the overlay (internal) network range to use. This value is set by kube_tool per CNI_PROVIDER.

Defaults to undef.

`container_runtime`

Specifies the runtime that the Kubernetes cluster uses.

Valid values are cri_containerd or docker.

Defaults to docker.

`controller`

Specifies whether to set the node as a Kubernetes controller.

Valid values are true, false.

Defaults to false.

`containerd_version`

Specifies the version of the containerd runtime the module installs.

Defaults to 1.4.3.

`containerd_install_method`

The method used to install containerd. Either archive or package.

Defaults to archive.

`containerd_package_name`

The package name for containerd when containerd_install_method is package.

Defaults to containerd.io

`containerd_archive`

The name of the containerd archive.

Defaults to containerd-${containerd_version}.linux-amd64.tar.gz.

`containerd_source`

The download URL for the containerd archive.

Defaults to https://github.com/containerd/containerd/releases/download/v${containerd_version}/${containerd_archive}.

`containerd_plugins_registry`

The configuration for the image registries used by containerd.

See https://github.com/containerd/containerd/blob/master/docs/cri/registry.md

Defaults to {'docker.io' => {'mirrors' => {'endpoint' => 'https://registry-1.docker.io'}}}.

For example,

'containerd_plugins_registry' => {
    'docker.io' => {
        'mirrors' => {
            'endpoint' => 'https://registry-1.docker.io'
        },
    },
    'docker.private.example.com' => {
        'mirrors' => {
            'endpoint' => 'docker.private.example.com'
        },
        'tls' => {
            'ca_file' => 'ca.pem',
            'cert_file' => 'cert.pem',
            'key_file' => 'key.pem',
            'insecure_skip_verify' => true,
        },
        'auth' => {
            'auth' => '1azhzLXVuaXQtdGVzdDpCQ0NwNWZUUXlyd3c1aUxoMXpEQXJnUT==',
        },
    },
    'docker.private.example2.com' => {
        'mirrors' => {
            'endpoint' => 'docker.private.example2.com'
        },
        'tls' => {
            'insecure_skip_verify' => true,
        },
        'auth' => {
            'username' => 'user2',
            'password' => 'secret2',
        },
    },
}

`controller_address`

The IP address and port for the controller the worker node joins. For example 172.17.10.101:6443.

Defaults to undef.

`controllermanager_extra_arguments`

A string array of extra arguments passed to the controller manager.

Defaults to [].

`controllermanager_extra_volumes`

A hash of extra volumes mounts mounted on the controller manager container.

For example,

controllermanager_extra_volumes => {
  'volume-name' => {
    hostPath  => '/data',
    mountPath => '/data',
    readOnly: => 'false',
    pathType: => 'DirectoryOrCreate'
  },
}

Defaults to {}.

`scheduler_extra_arguments`

A string array of extra arguments passed to the scheduler.

Defaults to [].

`create_repos`

Specifies whether to install the upstream Kubernetes and Docker repos.

Valid values are true, false.

Defaults to true.

`disable_swap`

Specifies whether to turn off swap setting. This is required for kubeadm.

Valid values are true, false.

Defaults to true.

`manage_kernel_modules`

Specifies whether to manage the kernel modules needed for kubernetes

Valid values are true, false.

Defaults to true

`manage_sysctl_settings`

Specifies whether to manage the the sysctl settings needed for kubernetes

Valid values are true, false.

Defaults to true

`discovery_token_hash`

The string used to validate to the root CA public key when joining a cluster. This value is created by kubetool.

Defaults to undef.

`docker_apt_location`

The APT repo URL for the Docker packages.

Defaults to https://apt.dockerproject.org/repo.

`docker_apt_release`

The release name for the APT repo for the Docker packages.

Defaults to 'ubuntu-${::lsbdistcodename}'.

`docker_apt_repos`

The repos to install from the Docker APT url.

Defaults to main.

`docker_version`

Specifies the version of the Docker runtime to install.

Defaults to:

17.03.0.ce-1.el7.centos on RedHat.
17.03.0~ce-0~ubuntu-xenial on Ubuntu.

`docker_package_name`

The docker package name to download from an upstream repo.

Defaults to docker-engine.

`docker_key_id`

The gpg key for the Docker APT repo.

Defaults to '58118E89F3A912897C070ADBF76221572C52609D'.

`docker_key_source`

The URL for the Docker APT repo gpg key.

Defaults to https://apt.dockerproject.org/gpg.

`docker_yum_baseurl`

The YUM repo URL for the Docker packages.

Defaults to https://download.docker.com/linux/centos/7/x86_64/stable.

`docker_yum_gpgkey`

The URL for the Docker yum repo gpg key.

Defaults to https://download.docker.com/linux/centos/gpg.

`docker_storage_driver`

The storage driver for Docker (added to '/etc/docker/daemon.json')

Defaults to overlay2.

`docker_storage_opts`

The storage options for Docker (Array added to '/etc/docker/daemon.json')

Defaults to undef.

`docker_extra_daemon_config`

Extra daemons options

Defaults to undef.

`etcd_version`

Specifies the version of etcd.

Defaults to 3.1.12.

`etcd_archive`

Specifies the name of the etcd archive.

Defaults to etcd-v${etcd_version}-linux-amd64.tar.gz.

`etcd_source`

The download URL for the etcd archive.

Defaults to https://github.com/coreos/etcd/releases/download/v${etcd_version}/${etcd_archive}.

`etcd_install_method`

The method on how to install etcd. Can be either wget (using etcd_source) or package (using $etcd_package_name)

Defaults to wget.

`etcd_package_name`

The system package name for installing etcd

Defaults to etcd-server.

`etcd_hostname`

Specifies the name of the etcd instance.

A Hiera is kubernetes::etcd_hostname:"%{::fqdn}".

Defaults to $hostname.

`etcd_ip`

Specifies the IP address etcd uses for communications.

A Hiera is kubernetes::etcd_ip:"%{networking.ip}".

Defaults to undef.

`etcd_initial_cluster`

Informs etcd on how many nodes are in the cluster.

A Hiera example is kubernetes::etcd_initial_cluster: kube-control-plane:172.17.10.101,kube-replica-control-plane-01:172.17.10.210,kube-replica-control-plane-02:172.17.10.220.

Defaults to undef.

`etcd_initial_cluster_state`

Informs etcd on the state of the cluster when starting. Useful for adding single nodes to a cluster. Allowed values are new or existing.

Defaults to new

`etcd_peers`

Specifies how etcd lists the peers to connect to the cluster.

A Hiera example is kubernetes::etcd_peers:

172.17.10.101
172.17.10.102
172.17.10.103

Defaults to undef

`etcd_ca_key`

The CA certificate key data for the etcd cluster. This value must be passed as string and not as a file.

Defaults to undef.

`etcd_ca_crt`

The CA certificate data for the etcd cluster. This value must be passed as string and not as a file.

Defaults to undef.

`etcdclient_key`

The client certificate key data for the etcd cluster. This value must be passed as string and not as a file.

Defaults to undef.

`etcdclient_crt`

The client certificate data for the etcd cluster. This value must be passed as string not as a file.

Defaults to undef.

`etcdserver_key`

The server certificate key data for the etcd cluster. This value must be passed as string not as a file.

Defaults to undef.

`etcdserver_crt`

The server certificate data for the etcd cluster . This value must be passed as string not as a file.

Defaults to undef.

`etcdpeer_crt`

The peer certificate data for the etcd cluster. This value must be passed as string not as a file.

Defaults to undef.

`etcdpeer_key`

The peer certificate key data for the etcd cluster. This value must be passed as string not as a file.

Defaults to undef.

image_repository

The container registry to pull control plane images from.

Defaults to k8s.gcr.io

`install_dashboard`

Specifies whether the Kubernetes dashboard is installed.

Valid values are true, false.

Defaults to false.

`kubernetes_ca_crt`

The cluster's CA certificate. Must be passed as a string and not a file.

Defaults to undef.

`kubernetes_ca_key`

The cluster's CA key. Must be passed as a string and not a file.

Defaults to undef.

`kubernetes_front_proxy_ca_crt`

The cluster's front-proxy CA certificate. Must be passed as a string and not a file.

Defaults to undef.

`kubernetes_front_proxy_ca_key`

The cluster's front-proxy CA key. Must be passed as a string and not a file.

Defaults to undef.

`kube_api_advertise_address`

The IP address you want exposed by the API server.

A Hiera example is kubernetes::kube_api_advertise_address:"%{networking.ip}".

Defaults to undef.

`kubernetes_version`

The version of the Kubernetes containers to install. Must follow X.Y.Z format.

Defaults to 1.10.2.

`kubernetes_package_version`

The version the Kubernetes OS packages to install, such as kubectl and kubelet.

Defaults to 1.10.2.

`kubeadm_extra_config`

A hash containing extra configuration data to be serialised with to_yaml and appended to the config.yaml file used by kubeadm.

Defaults to {}.

`kubelet_extra_config`

A hash containing extra configuration data to be serialised with to_yaml and appended to Kubelet configuration file for the cluster. Requires DynamicKubeletConfig.

Defaults to {}.

`kubelet_extra_arguments`

A string array to be appended to kubeletExtraArgs in the Kubelet's nodeRegistration configuration. It is applied to both control-planes and nodes. Use this for critical Kubelet settings such as pod-infra-container-image which may be problematic to configure via kubelet_extra_config and DynamicKubeletConfig.

Defaults to [].

`kubernetes_apt_location`

The APT repo URL for the Kubernetes packages.

Defaults to https://apt.kubernetes.io.

`kubernetes_apt_release`

The release name for the APT repo for the Kubernetes packages.

Defaults to 'kubernetes-${::lsbdistcodename}'.

`kubernetes_apt_repos`

The repos to install using the Kubernetes APT URL.

Defaults to main.

`kubernetes_key_id`

The gpg key for the Kubernetes APT repo.

Defaults to '54A647F9048D5688D7DA2ABE6A030B21BA07F4FB'.

`kubernetes_key_source`

The URL for the APT repo gpg key.

Defaults to https://packages.cloud.google.com/apt/doc/apt-key.gpg.

`kubernetes_yum_baseurl`

The YUM repo URL for the Kubernetes packages.

Defaults to https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64.

`kubernetes_yum_gpgkey`

The URL for the Kubernetes yum repo gpg key.

Defaults to https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg.

`manage_docker`

Specifies whether to install Docker repositories and packages via this module.

Valid values are true, false.

Defaults to true.

`manage_etcd`

Specifies whether to install an external Etcd via this module.

Valid values are true, false.

Defaults to true.

`node_label`

An override to the label of a node.

Defaults to hostname.

`runc_source`

The download URL for runc.

Defaults to https://github.com/opencontainers/runc/releases/download/v${runc_version}/runc.amd64.

`runc_version`

Specifies the version of runc to install.

Defaults to 1.0.0.

`sa_key`

The key for the service account. This value must be a certificate value and not a file.

Defaults to undef.

`sa_pub`

The public key for the service account. This value must be a certificate value and not a file.

Defaults to undef.

`schedule_on_controller`

Specifies whether to remove the control plane role and allow pod scheduling on controllers.

Valid values are true, false.

Defaults to false.

`service_cidr`

The IP address range for service VIPs.

Defaults to 10.96.0.0/12.

`token`

The string used to join nodes to the cluster. This value must be in the form of [a-z0-9]{6}.[a-z0-9]{16}.

Defaults to undef.

`ttl_duration`

The duration before the bootstrap token is automatically deleted (e.g. 1s, 2m, 3h). If set to '0', the token will never expire

Defaults to 24h

`worker`

Specifies whether to set the node as a Kubernetes worker.

Valid values are true, false.

Defaults to false.

Limitations

This module supports:

Puppet 4 or higher.
Kubernetes 1.10.x or higher.
Ruby 2.3.0 or higher.

This module has been tested on the following operating systems:

RedHat 7.x.
CentOS 7.x.
Ubuntu 16.04

Docker is the supported container runtime for this module.

Development

If you would like to contribute to this module, please follow the rules in the CONTRIBUTING.md. For more information, see our module contribution guide.

To run the acceptance tests you can use Puppet Litmus with the Vagrant provider by using the following commands:

# install rvm with and ruby >2.5
rvm install "ruby-2.5.1"
gem install bundler
bundler install
bundle exec rake 'litmus:provision_list[all_supported]'
bundle exec rake 'litmus:install_agent[puppet5]'
bundle exec rake 'litmus:install_module'
bundle exec rake 'litmus:acceptance:parallel'

For more information about Litmus please see the wiki.

As currently Litmus does not allow memory size and cpu size parameters for the Vagrant provisioner task we recommend to manually update the Vagrantfile used by the provisioner and add at least the following specifications for the puppetlabs-kubernetes module acceptance tests:

Update Vagrantfile in the file: spec/fixtures/modules/provision/tasks/vagrant.rb

    vf = <<-VF 
    Vagrant.configure(\"2\") do |config|
    config.vm.box = '#{platform}'
    config.vm.boot_timeout = 600
    config.ssh.insert_key = false
    config.vm.hostname = "testkube"
    config.vm.provider "virtualbox" do |vb|
    vb.memory = "2048"
    vb.cpus = "2"
    end
    #{network}
    #{synced_folder}
    end
    VF

Examples

In the examples folder you will find a bash script containg a few sample Puppet Bolt commands for the usage of the tasks. The example script is intended to be used with a Kubernetes API that requires the token authentication header, but the token parameter is optional by default.

Files

README.md

Latest commit

History

README.md

File metadata and controls

Kubernetes

Table of Contents

Description

Setup

Generating the module configuration

Adding the {$OS}.yaml and {$hostname}.yaml files to Hiera

Possible Error fetching hiera data

Configuring your node

Installing Kubernetes on different OS

Validating and unit testing the module

Reference

Classes

Public classes

Private classes

Defined types

Parameters

apiserver_cert_extra_sans

apiserver_extra_arguments

apiserver_extra_volumes

cloud_provider

cloud_config

cni_network_provider

cni_rbac_binding

cni_pod_cidr

container_runtime

controller

containerd_version

containerd_install_method

containerd_package_name

containerd_archive

containerd_source

containerd_plugins_registry

controller_address

controllermanager_extra_arguments

controllermanager_extra_volumes

scheduler_extra_arguments

create_repos

disable_swap

manage_kernel_modules

manage_sysctl_settings

discovery_token_hash

docker_apt_location

docker_apt_release

docker_apt_repos

docker_version

docker_package_name

docker_key_id

docker_key_source

docker_yum_baseurl

docker_yum_gpgkey

docker_storage_driver

docker_storage_opts

docker_extra_daemon_config

etcd_version

etcd_archive

etcd_source

etcd_install_method

etcd_package_name

etcd_hostname

etcd_ip

etcd_initial_cluster

etcd_initial_cluster_state

etcd_peers

etcd_ca_key

etcd_ca_crt

etcdclient_key

etcdclient_crt

etcdserver_key

etcdserver_crt

etcdpeer_crt

etcdpeer_key

image_repository

install_dashboard

kubernetes_ca_crt

Adding the `{$OS}.yaml` and `{$hostname}.yaml` files to Hiera

`apiserver_cert_extra_sans`

`apiserver_extra_arguments`

`apiserver_extra_volumes`

`cloud_provider`

`cloud_config`

`cni_network_provider`

`cni_rbac_binding`

`cni_pod_cidr`

`container_runtime`

`controller`

`containerd_version`

`containerd_install_method`

`containerd_package_name`

`containerd_archive`

`containerd_source`

`containerd_plugins_registry`

`controller_address`

`controllermanager_extra_arguments`

`controllermanager_extra_volumes`

`scheduler_extra_arguments`

`create_repos`

`disable_swap`

`manage_kernel_modules`

`manage_sysctl_settings`

`discovery_token_hash`

`docker_apt_location`

`docker_apt_release`

`docker_apt_repos`

`docker_version`

`docker_package_name`

`docker_key_id`

`docker_key_source`

`docker_yum_baseurl`

`docker_yum_gpgkey`

`docker_storage_driver`

`docker_storage_opts`

`docker_extra_daemon_config`

`etcd_version`

`etcd_archive`

`etcd_source`

`etcd_install_method`

`etcd_package_name`

`etcd_hostname`

`etcd_ip`

`etcd_initial_cluster`

`etcd_initial_cluster_state`

`etcd_peers`

`etcd_ca_key`

`etcd_ca_crt`

`etcdclient_key`

`etcdclient_crt`

`etcdserver_key`

`etcdserver_crt`

`etcdpeer_crt`

`etcdpeer_key`

`install_dashboard`

`kubernetes_ca_crt`

`kubernetes_ca_key`

`kubernetes_front_proxy_ca_crt`

`kubernetes_front_proxy_ca_key`

`kube_api_advertise_address`

`kubernetes_version`

`kubernetes_package_version`

`kubeadm_extra_config`

`kubelet_extra_config`

`kubelet_extra_arguments`

`kubernetes_apt_location`

`kubernetes_apt_release`

`kubernetes_apt_repos`

`kubernetes_key_id`

`kubernetes_key_source`

`kubernetes_yum_baseurl`

`kubernetes_yum_gpgkey`

`manage_docker`

`manage_etcd`

`node_label`

`runc_source`

`runc_version`

`sa_key`