diff --git a/examples/02-Utility/EchoBLE/EchoBLE.ino b/examples/02-Utility/EchoBLE/EchoBLE.ino
new file mode 100644
index 00000000..e92295d8
--- /dev/null
+++ b/examples/02-Utility/EchoBLE/EchoBLE.ino
@@ -0,0 +1,113 @@
+/*
+*	EchoBLE
+*
+*	Created: Ira Ray Jenkins, Creare, July 2020
+*	Purpose: Demonstrates BLE functionality of the Tympan BC127 Bluetooth module. Data
+		received via BLE will be echo'd back.
+*
+*/
+#include <Tympan_Library.h>
+
+Tympan myTympan(TympanRev::D);
+
+usb_serial_class *USB_Serial;
+HardwareSerial *BT_Serial;
+String response;
+
+void echoIncomingUSBSerial(void) {
+  while (USB_Serial->available()) {
+    BT_Serial->write(USB_Serial->read());
+  }
+}
+
+void echoIncomingBTSerial(void) {
+  while(BT_Serial->available()) {
+    USB_Serial->write(BT_Serial->read());
+  }
+}
+
+void readBTResponse(void) {
+  response = BT_Serial->readString();
+}
+
+void setup() {
+  myTympan.beginBothSerial(); delay(2000);
+  USB_Serial = myTympan.getUSBSerial();
+  BT_Serial = myTympan.getBTSerial();
+  USB_Serial->println("*** Setup Starting...");
+
+  BLE_Setup();
+
+  USB_Serial->println("*** Setup Complete.");
+  
+}
+
+void loop() {
+ while(BT_Serial->available()) {
+    response = BT_Serial->readString();
+
+    USB_Serial->println("Response: " + response.trim());
+    
+    if(response.substring(0,8) == "RECV BLE") {
+      USB_Serial->println("*** Received: " + response.substring(9));
+
+      BT_Serial->print("SEND Received: " + response.substring(9) + "\r");
+
+      delay(200);
+      
+      BT_Serial->readString();
+      
+    }
+  }
+}
+
+void BLE_Setup(void) {
+  // get into command mode
+  USB_Serial->println("*** Switching Tympan RevD BT module into command mode...");
+  myTympan.forceBTtoDataMode(false); delay(500);
+  BT_Serial->print("$"); delay(400);
+  BT_Serial->print("$$$"); delay(400);
+  delay(2000);
+  echoIncomingBTSerial();
+  echoIncomingUSBSerial();
+  USB_Serial->println("*** Should be in command mode.");
+
+  USB_Serial->println("*** Clearing buffers. Sending carriage return.");
+  BT_Serial->print("\r"); delay(500);
+  USB_Serial->println("*** Should have gotten 'Error', which is fine here.");
+
+  // restore factory defaults
+  USB_Serial->println("*** Restoring factory defaults...");
+  BT_Serial->print("RESTORE"); BT_Serial->print('\r'); delay(500);echoIncomingBTSerial();
+  BT_Serial->print("WRITE"); BT_Serial->print('\r'); delay(500);echoIncomingBTSerial();
+  BT_Serial->print("RESET"); BT_Serial->print('\r'); delay(1500);echoIncomingBTSerial();
+  USB_Serial->println("*** Reset should be complete.  Did it give two 'OK's, an ID blurb, and then 'READY'?");
+
+  // Is this necessary?
+  // set the GP IO pins so that the data mode / command mode can be set by hardware
+  USB_Serial->println("*** Setting GPIOCONTROL mode to OFF, which is what we need...");
+  BT_Serial->print("SET GPIOCONTROL=OFF");BT_Serial->print('\r'); delay(500);echoIncomingBTSerial();
+  BT_Serial->print("WRITE"); BT_Serial->print('\r'); delay(500); echoIncomingBTSerial();
+
+  // set advertising
+  USB_Serial->println("*** Set advertising on...");
+  BT_Serial->print("ADVERTISING ON\r"); delay(500); echoIncomingBTSerial();
+  USB_Serial->println("*** Advertising on.");
+
+  while(1) {
+    if(BT_Serial->available()) {
+      readBTResponse();
+      USB_Serial->print("*** Response = "); USB_Serial->println(response);
+      response.trim();
+      
+      if(response.equalsIgnoreCase("OPEN_OK BLE")) {
+        USB_Serial->println("*** Connected.");
+        break;
+      }
+
+      delay(2000);
+    }
+  }
+
+  USB_Serial->println("*** BLE Connected.");
+}