more xbee joint code

Code/BITS/BITSv5/test/SX1262.cpp

@@ -236,7 +236,7 @@ void set_radio_rf_freq() {
 }
 
 void set_tx_params() {
-    const uint8_t power = 0x01;
+    const uint8_t power = 0x16;
     const uint8_t ramp_time = 0x04;
 
     gpio_put(CS_PIN, 0);
@@ -269,9 +269,9 @@ void write_radio_buffer() {
 }
 
 void set_radio_modulation_param() {
-    const uint8_t spreading_factor = 0x0B;
+    const uint8_t spreading_factor = 0x07;
     const uint8_t bandwidth = 0x04;
-    const uint8_t coding_rate = 0x01;
+    const uint8_t coding_rate = 0x04;
     const uint8_t low_data_rate = 0x01;
 
     gpio_put(CS_PIN, 0);
@@ -284,12 +284,12 @@ void set_radio_modulation_param() {
 }
 
 void set_packet_parameters() {
-    const uint8_t preamble2 = 0;
-    const uint8_t preamble1 = 8;
-    const uint8_t header = 0;
-    const uint8_t length = 1;
-    const uint8_t crc = 1;
-    const uint8_t iq = 0;
+    const uint8_t preamble2 = 0x00;
+    const uint8_t preamble1 = 0x08;
+    const uint8_t header = 0x01;
+    const uint8_t length = 0x01;
+    const uint8_t crc = 0x00;
+    const uint8_t iq = 0x00;
 
     printf("Setting Packet Parameters\n");