Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Difference in auto-orientation between GUI and CLI #6092

Open
1 of 2 tasks
vl-201 opened this issue Mar 13, 2025 · 2 comments
Open
1 of 2 tasks

Difference in auto-orientation between GUI and CLI #6092

vl-201 opened this issue Mar 13, 2025 · 2 comments
Assignees
Labels
bug Something isn't working

Comments

@vl-201
Copy link

vl-201 commented Mar 13, 2025

Bambu Studio Version

1.10.0.38

Where is the application from?

Bambu Lab Official website

OS version

macOS 15.3.1

Additional system information

No response

Printer

Bambu Lab X1

How to reproduce

GUI auto-orient results:

  1. Run in terminal <path_to_orca> <path_to_model>
  2. The GUI will open
  3. Click Auto Orient
  4. Check result in terminal

CLI auto-orient results:

  1. Run in terminal <path_to_orca> --orient 1 --info <path_to_model>
  2. Check result in terminal

Actual results

Results from GUI auto-orientation:

                                     overhang, bottom, bothull, contour, A_laf, A_prj, unprintability
orientation:-0.0000 -0.0000  1.0000, cost:2308.1,       115.5,  77.7,   43.0,   66.7,   0.0,    14.5
orientation:-0.0000  1.0000  0.0000, cost:2344.0,       3651.2, 2763.7, 241.7,  56.0,   0.0,    0.5
orientation:-0.0000 -1.0000 -0.0000, cost:2501.8,       3387.3, 2470.2, 232.8,  38.9,   0.0,    0.6
orientation: 0.0000 -0.0000 -1.0000, cost:2282.9,       162.0,  469.1,  50.9,   68.8,   0.0,    9.6
orientation:-1.0000 -0.0000 -0.0000, cost:722.7,        633.7,  6200.6, 100.7,  45.6,   0.0,    0.7
orientation: 1.0000 -0.0000 -0.0000, cost:1042.1,       79.3,   52.5,   35.6,   43.6,   0.0,    9.5
orientation: 0.8910 -0.4540 -0.0000, cost:1080.2,       71.2,   62.7,   33.8,   10.2,   0.0,    10.8
orientation: 0.6129 -0.7901 -0.0000, cost:57.0, 71.2,   62.8,   33.8,   10.2,   0.0,    0.7
orientation: 0.1565 -0.9877 -0.0000, cost:4736.7,       57.0,   45.6,   30.2,   9404.5, 0.0,    59.3
orientation: 0.9877 -0.1564 -0.0000, cost:1077.5,       57.0,   2618.1, 30.2,   2147.9, 0.0,    5.3
orientation: 0.8926 -0.3952  0.2168, cost:1115.9,       0.0,    2494.8, 0.0,    23.9,   0.0,    109.0
orientation:-0.3704  0.6116 -0.6991, cost:81.7, 0.0,    2278.5, 0.0,    0.0,    0.0,    100.8
orientation:-0.0000 -0.5780  0.8160, cost:69.6, 61.9,   3618.5, 31.5,   56.9,   0.0,    0.3
orientation: 0.5395  0.6789 -0.4980, cost:0.0,  0.0,    1619.9, 0.7,    0.0,    0.0,    100.1
orientation: 0.9880 -0.1547 -0.0000, cost:1077.5,       57.0,   2694.7, 30.2,   2147.9, 0.0,    5.2
orientation:-0.0000  0.7589 -0.6512, cost:83.7, 63.8,   1412.8, 31.9,   56.8,   0.0,    0.6
orientation: 0.9922 -0.0000 -0.1246, cost:1091.0,       5.8,    1345.4, 9.6,    2162.9, 0.0,    14.5
orientation: 0.0000  0.7589 -0.6512, cost:83.7, 63.8,   1412.8, 31.9,   56.8,   0.0,    0.6
orientation:-0.7071 -0.0000  0.7071, cost:23.3, 6.4,    5.8,    10.1,   19.2,   0.0,    3.0
orientation:-0.0000 -0.7071  0.7071, cost:77.2, 57.3,   36.7,   30.3,   56.4,   0.0,    1.1
orientation: 0.7071 -0.0000  0.7071, cost:36.2, 6.4,    5.6,    10.1,   15.1,   0.0,    4.1
orientation:-0.0000  0.7071  0.7071, cost:16.9, 0.0,    0.0,    0.0,    7.0,    0.0,    153.9
orientation:-0.7071 -0.7071 -0.0000, cost:0.0,  0.0,    0.2,    0.0,    0.0,    0.0,    119.5
orientation: 0.7071 -0.7071 -0.0000, cost:57.0, 71.2,   62.8,   33.8,   13.6,   0.0,    0.7
orientation: 0.7071  0.7071 -0.0000, cost:0.0,  0.0,    0.0,    0.7,    0.0,    0.0,    113.8
orientation:-0.7071  0.7071 -0.0000, cost:33.9, 0.0,    0.0,    0.0,    47.8,   0.0,    188.8
orientation:-0.7071 -0.0000 -0.7071, cost:14.1, 0.0,    0.0,    0.0,    19.2,   0.0,    148.6
orientation:-0.0000 -0.7071 -0.7071, cost:4.0,  0.0,    0.0,    0.0,    7.0,    0.0,    128.2
orientation: 0.7071 -0.0000 -0.7071, cost:39.8, 0.0,    0.0,    0.0,    23.3,   0.0,    200.0
orientation:-0.0000  0.7071 -0.7071, cost:118.6,        6.4,    3.6,    10.1,   79.8,   0.0,    11.5
best:-0.000000 -0.578044  0.816006, costs:69.6, 61.9,   3618.5, 31.5,   56.9,   0.0,    0.3

Results from CLI auto-orientation:

                                      overhang, bottom, bothull, contour, A_laf, A_prj, unprintability
orientation:-0.0000 -0.0000  1.0000, cost:2405.2,       115.5,  77.7,   43.0,   65.2,   0.0,    25.3
orientation:-0.0000  1.0000  0.0000, cost:2427.1,       3651.2, 2763.7, 241.7,  56.0,   0.0,    0.9
orientation:-0.0000 -1.0000 -0.0000, cost:2609.4,       3387.3, 2470.2, 232.8,  38.9,   0.0,    1.0
orientation: 0.0000 -0.0000 -1.0000, cost:2373.3,       162.0,  469.1,  50.9,   67.2,   0.0,    15.4
orientation:-1.0000 -0.0000 -0.0000, cost:757.1,        633.7,  6200.6, 100.7,  45.6,   0.0,    0.9
orientation: 1.0000 -0.0000 -0.0000, cost:1134.2,       79.3,   52.5,   35.6,   43.6,   0.0,    17.1
orientation: 0.8271 -0.5621 -0.0000, cost:5890.8,       71.2,   62.7,   33.8,   10.2,   0.0,    96.7
orientation: 0.9759 -0.2181 -0.0000, cost:1161.9,       65.5,   39.9,   32.4,   2144.1, 0.0,    22.7
orientation: 0.9956 -0.0941 -0.0000, cost:1192.4,       24.9,   49.4,   19.9,   2121.8, 0.0,    52.5
orientation: 0.3972 -0.9177 -0.0000, cost:4853.3,       71.2,   62.8,   33.8,   13.6,   0.0,    79.7
orientation: 0.9880 -0.1547 -0.0000, cost:1163.9,       57.0,   2694.7, 30.2,   2147.9, 0.0,    5.9
orientation: 0.8926 -0.3952  0.2168, cost:1216.3,       0.0,    2494.8, 0.0,    23.9,   0.0,    107.8
orientation:-0.3704  0.6116 -0.6991, cost:7252.6,       0.0,    2278.5, 0.0,    0.0,    0.0,    151.0
orientation:-0.0000 -0.5780  0.8160, cost:7180.7,       61.9,   3618.5, 31.5,   56.9,   0.0,    26.1
orientation: 0.5395  0.6789 -0.4980, cost:5963.4,       0.0,    1619.9, 0.7,    0.0,    0.0,    158.9
orientation:-0.0000  0.7589 -0.6512, cost:7207.4,       63.8,   1412.8, 31.9,   54.1,   0.0,    51.8
orientation: 0.9922 -0.0000 -0.1246, cost:1183.1,       5.8,    1345.4, 9.6,    2162.9, 0.0,    14.2
orientation: 0.0000  0.7589 -0.6512, cost:7207.4,       63.8,   1412.8, 31.9,   54.1,   0.0,    51.8
orientation:-0.7071 -0.0000  0.7071, cost:3562.0,       6.4,    5.8,    10.1,   19.2,   0.0,    518.1
orientation:-0.0000 -0.7071  0.7071, cost:7204.8,       57.3,   36.7,   30.3,   56.4,   0.0,    148.0
orientation: 0.7071 -0.0000  0.7071, cost:3532.7,       6.4,    5.6,    10.1,   15.1,   0.0,    514.7
orientation:-0.0000  0.7071  0.7071, cost:7136.5,       0.0,    0.0,    0.0,    7.0,    0.0,    18355.0
orientation:-0.7071 -0.7071 -0.0000, cost:5908.1,       0.0,    0.2,    0.0,    0.0,    0.0,    14641.1
orientation: 0.7071 -0.7071 -0.0000, cost:5913.4,       71.2,   62.8,   33.8,   13.6,   0.0,    97.1
orientation: 0.7071  0.7071 -0.0000, cost:5891.6,       0.0,    0.0,    0.7,    0.0,    0.0,    11429.1
orientation:-0.7071  0.7071 -0.0000, cost:5977.2,       0.0,    0.0,    0.0,    47.8,   0.0,    15395.1
orientation:-0.7071 -0.0000 -0.7071, cost:3561.8,       0.0,    0.0,    0.0,    19.2,   0.0,    9215.9
orientation:-0.0000 -0.7071 -0.7071, cost:7132.9,       0.0,    0.0,    0.0,    7.0,    0.0,    18345.7
orientation: 0.7071 -0.0000 -0.7071, cost:3545.4,       0.0,    0.0,    0.0,    23.3,   0.0,    9174.4
orientation:-0.0000  0.7071 -0.7071, cost:7239.5,       6.4,    3.6,    10.1,   79.8,   0.0,    1074.7
best:-0.000000  1.000000  0.000000, costs:2427.1,       3651.2, 2763.7, 241.7,  56.0,   0.0,    0.9

Expected results

The results of auto-orientation should be the same in both the GUI and CLI

I have tried running OrcaSlicer with the configs specified via --load-settings and --load-filaments, however, this did not work.
At the same time, I noticed that changing the config settings for the CLI does not change the result at all.

Maybe I'm doing something wrong? Is there any way to get the same auto-orientation results in the CLI that the GUI gives?

Project file & Debug log uploads

sm_bracket.zip

Checklist of files to include

  • Log file
  • Project file
@vl-201 vl-201 added the bug Something isn't working label Mar 13, 2025
@BoBoYu-1
Copy link

Hello, please update to the latest official version V1.10.2.76 on our official website and give it a try.
Download Address:https://bambulab.com/zh/download/studio

@BoBoYu-1 BoBoYu-1 assigned bambu123 and tangketan and unassigned bambu123 Mar 14, 2025
@vl-201
Copy link
Author

vl-201 commented Mar 14, 2025

Hello, please update to the latest official version V1.10.2.76 on our official website and give it a try. Download Address:https://bambulab.com/zh/download/studio

Thank you
I tried running auto-orientation in version 1.10.2.76, but unfortunately I got the identical result as the last version

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
bug Something isn't working
Projects
None yet
Development

No branches or pull requests

4 participants