You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I just changed my nozzle from a .4 to a .6 and forgot to re-install the 2 screws to hold the nozzle. I realized this during the bed leveling step of calibration and quickly clicked the stop button on the display of the X1C. It was acknowledge both on the screen and in bambu studio that I asked it to stop. However, the machine just kept leveling. This seems like it could have potentially been catastrophic. Eventually after bed leveling the machine stopped.
Actual results
Did not abort immediately
Expected results
I expect the machine to fully stop when I hit stop.
Project file & Debug log uploads
Checklist of files to include
Log file
Project file
The text was updated successfully, but these errors were encountered:
Please upload log through Handy APP, and give us your ticket number
Upload log files through Bambu Handy
Log files from the Bambu printer can be uploaded via Bambu Handy over the network, with an upload speed of around 150 kbps under optimal network conditions.
When uploading logs, you have the option to select a specific time frame, allowing you to reduce the volume of logs transmitted and shorten the upload duration.
To upload files, go to Me → Support Tickets → Choose the ticket for log upload and proceed with the operation.
Bambu Studio Version
1.10.2.76
Where is the application from?
Bambu Lab Official website
OS version
Windows 10
Additional system information
No response
Printer
Bambu X1C
How to reproduce
I just changed my nozzle from a .4 to a .6 and forgot to re-install the 2 screws to hold the nozzle. I realized this during the bed leveling step of calibration and quickly clicked the stop button on the display of the X1C. It was acknowledge both on the screen and in bambu studio that I asked it to stop. However, the machine just kept leveling. This seems like it could have potentially been catastrophic. Eventually after bed leveling the machine stopped.
Actual results
Did not abort immediately
Expected results
I expect the machine to fully stop when I hit stop.
Project file & Debug log uploads
Checklist of files to include
The text was updated successfully, but these errors were encountered: