-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathlab4.err
173 lines (133 loc) · 9.73 KB
/
lab4.err
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 12:03:09
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 12:17:26
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 12:47:23
*** ERROR *** CP = 3.672 TIME= 12:52:42
An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data
has been corrupted. ANSYS is unable to recover and will terminate.
Previously saved files are unaffected. Please send the data leading
to this operation to your technical support provider, as this will
allow ANSYS, Inc to improve the program.
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 12:52:58
*** ERROR *** CP = 2.953 TIME= 12:53:38
An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data
has been corrupted. ANSYS is unable to recover and will terminate.
Previously saved files are unaffected. Please send the data leading
to this operation to your technical support provider, as this will
allow ANSYS, Inc to improve the program.
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 12:54:16
*** WARNING *** CP = 5.188 TIME= 13:13:54
The mesh of area 1 contains PLANE182 triangles, which are much too
stiff in bending. Use quadratic (6- or 8-node) elements if possible.
*** WARNING *** CP = 8.156 TIME= 13:25:25
Both solid model and finite element model boundary conditions have been
applied to this model. As solid loads are transferred to the nodes or
elements, they can overwrite directly applied loads.
*** WARNING *** CP = 8.828 TIME= 13:25:26
Pivoting has been activated for the Sparse Matrix solver. The memory
required may greatly exceed the predicted amount. In that event, use
the BCSOPTION command to change the memory mode and/or memory size
used by the Sparse Matrix solver.
*** WARNING *** SUPPRESSED MESSAGE CP = 23.141 TIME= 13:33:12
No new variables defined to store.
*** WARNING *** SUPPRESSED MESSAGE CP = 25.359 TIME= 13:35:29
No new variables defined to store.
*** WARNING *** SUPPRESSED MESSAGE CP = 25.375 TIME= 13:35:36
No new variables defined to store.
*** WARNING *** CP = 26.703 TIME= 13:42:06
Both solid model and finite element model boundary conditions have been
applied to this model. As solid loads are transferred to the nodes or
elements, they can overwrite directly applied loads.
*** WARNING *** CP = 26.859 TIME= 13:42:07
Pivoting has been activated for the Sparse Matrix solver. The memory
required may greatly exceed the predicted amount. In that event, use
the BCSOPTION command to change the memory mode and/or memory size
used by the Sparse Matrix solver.
*** WARNING *** SUPPRESSED MESSAGE CP = 31.969 TIME= 13:43:08
Cannot change number of variables with data stored. The NUMVAR command
is ignored.
*** WARNING *** CP = 35.203 TIME= 13:45:07
Both solid model and finite element model boundary conditions have been
applied to this model. As solid loads are transferred to the nodes or
elements, they can overwrite directly applied loads.
*** WARNING *** CP = 35.359 TIME= 13:45:07
Pivoting has been activated for the Sparse Matrix solver. The memory
required may greatly exceed the predicted amount. In that event, use
the BCSOPTION command to change the memory mode and/or memory size
used by the Sparse Matrix solver.
*** WARNING *** SUPPRESSED MESSAGE CP = 38.516 TIME= 13:45:10
Cannot change number of variables with data stored. The NUMVAR command
is ignored.
*** WARNING *** CP = 39.531 TIME= 13:46:29
Both solid model and finite element model boundary conditions have been
applied to this model. As solid loads are transferred to the nodes or
elements, they can overwrite directly applied loads.
*** WARNING *** CP = 39.719 TIME= 13:46:29
Pivoting has been activated for the Sparse Matrix solver. The memory
required may greatly exceed the predicted amount. In that event, use
the BCSOPTION command to change the memory mode and/or memory size
used by the Sparse Matrix solver.
*** WARNING *** SUPPRESSED MESSAGE CP = 42.766 TIME= 13:46:32
Cannot change number of variables with data stored. The NUMVAR command
is ignored.
*** WARNING *** SUPPRESSED MESSAGE CP = 44.719 TIME= 13:47:47
Cannot change number of variables with data stored. The NUMVAR command
is ignored.
*** WARNING *** SUPPRESSED MESSAGE CP = 45.312 TIME= 13:48:19
No new variables defined to store.
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 13:51:38
*** WARNING *** CP = 1.703 TIME= 13:51:45
Both solid model and finite element model boundary conditions have been
applied to this model. As solid loads are transferred to the nodes or
elements, they can overwrite directly applied loads.
*** WARNING *** CP = 1.938 TIME= 13:51:45
Pivoting has been activated for the Sparse Matrix solver. The memory
required may greatly exceed the predicted amount. In that event, use
the BCSOPTION command to change the memory mode and/or memory size
used by the Sparse Matrix solver.
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 08:47:35
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 10:20:18
*** ERROR *** CP = 2.203 TIME= 10:29:16
Element 3 does not have all of its required nodes defined. The E
command is aborted.
*** ERROR *** CP = 2.250 TIME= 10:29:19
The E command cannot store element 3, possibly because one or more
nodes is not defined.
*** WARNING *** CP = 2.828 TIME= 10:33:01
Nodes I and J of element 3 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 2.828 TIME= 10:33:01
Nodes I and J of element 4 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 5.422 TIME= 10:38:41
Nodes I and J of element 3 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 5.422 TIME= 10:38:41
Nodes I and J of element 4 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 10.000 TIME= 10:54:31
Nodes I and J of element 3 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 10.000 TIME= 10:54:31
Nodes I and J of element 4 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 10.000 TIME= 10:54:31
Nodes I and J of element 6 ( COMBIN14 ) are not coincident.
*** ERROR *** CP = 11.938 TIME= 10:55:06
The eigenvalue extraction method must be specified on the MODOPT
command. Either the LANB, LANPCG, or SNODE method is usually
recommended.
*** WARNING *** CP = 12.047 TIME= 10:55:12
Nodes I and J of element 3 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 12.047 TIME= 10:55:12
Nodes I and J of element 4 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 12.047 TIME= 10:55:12
Nodes I and J of element 6 ( COMBIN14 ) are not coincident.
*** ERROR *** CP = 12.047 TIME= 10:55:12
The model data was checked and there were errors found.
Please check output or errors file ( D:\APDL-LAB4\lab4.err ) for
messages.
*** WARNING *** CP = 12.219 TIME= 10:55:47
Nodes I and J of element 3 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 12.219 TIME= 10:55:47
Nodes I and J of element 4 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 12.219 TIME= 10:55:47
Nodes I and J of element 6 ( COMBIN14 ) are not coincident.
/COM,ANSYS RELEASE Release 17.0 BUILD 17.0 UP20151214 11:08:17
*** WARNING *** CP = 3.547 TIME= 11:19:15
Nodes I and J of element 2 ( COMBIN14 ) are not coincident.
*** WARNING *** CP = 5.266 TIME= 11:21:21
Nodes I and J of element 2 ( COMBIN14 ) are not coincident.