-
Notifications
You must be signed in to change notification settings - Fork 6
/
change_record.txt
43 lines (40 loc) · 2.58 KB
/
change_record.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
V1.7 (17.03.203)
Changes
- added support for Bosch Sensortec acceleration and pressure sensor
__________________________________________________________________________________________________________________________________________________
V1.6 (21.11.2010)
Fixed following bugs
- rfsimpliciti.c/simpliciti_sync_decode_ap_cmd_callback(),
- timer.c/TIMER0_A0_ISR(), LCD shows "done" after successfully received data
- main.c/wakeup_event(),
- rfbsl.c/sx_rfbsl() rfBSL requires two button presses in order to update watch
- timer.c/Timer0_A3_Start() Fixed register read (Asynchronous)
- timer.c/Timer0_A4_Delay() Fixed register read (Asynchronous)
Avoid unwanted flag changes caused by interrupt methods
After timeout the accelerometer menu shows "----"
- port.c/PORT2_ISR() and timer.c/TIMER0_A0_ISR() Changes the menu if the pressed time from STAR or NUM button are between "short(50ms)" and "long(3s)"
The backlight stays 3 seconds on
- display.c Removed file display1.c. The content is now in display.c
- display.h Fixed LCD_UNIT_L1_PER_S_MASK bit
Other changes:
- adc12.c and adc12.h Removed commented function and #defines
- battery.c Removed commented function
- DCO settling time Set to 375000 cycles
________________________________________________________________________________________________________________________________________________
V1.5 (16.03.2010)
Fixed following bugs
- main.c/init_application() Changed XT1 drive level to highest to avoid ACLK noise when turning on backlight.
- main.c/wakeup_event(), timer.c/TIMER0_A0_ISR() Modified key lock procedure.
- vti_ps.c/ps_get_temp() Negative °C are now converted correctly to Kelvin
- altitude.c/mx_altitude() Enabled fast mode when changing altitude offset
- ports.c/PORT2_ISR() Disabled stopwatch stop when watch buttons are locked
Other changes
- main.c/read_calibration_values() Added range check for rf_frequoffset variable
Added bytes for altitude offset correction and s/w version
- altitude.h, altitude.c Added initial altitude offset correction
- SimpliciTI Added SimpliciTI sources to project. Upgraded to Version 1.1.1.
- RFBSL Added wireless update support
- Button names Changed button names from M1/M2/S1/S2/BL to STAR/NUM/UP/DOWN/BACKLIGHT
__________________________________________________________________________________________________________________________________________________
V1.4 (22.11.2009)
First version released to manufacturing.