parse file header

[ilka-schulz]

When converting an mpr file to an mpt file, there is a lot of header information, e.g.:

example MPT file header

EC-Lab ASCII FILE
Nb header lines : 191                         

Galvano Electrochemical Impedance Spectroscopy

Run on channel : 1 (SN 36210)
User : 
CE vs. WE compliance from -10 V to 10 V
Electrode connection : standard
Ewe ctrl range : min = -10.00 V, max = 10.00 V
Safety Limits :
	Ewe min = -0.50 V
	Ewe max = 2.80 V
	for t > 10 ms
	Do not start on E overload
Acquisition started on : 08/11/2021 16:03:59.530
Loaded Setting File :  C:\BT-Lab\Daten\PT\Gedruckte Ti PTLs\Ui-Kennlinie.mps
Saved on :
	File : 210811_N115_T80_p1_Probe11_02_GEIS_C01.mpr
	Directory : C:\EC-Lab\PT\gedruckte PTLs\
	Host : 130.75.205.160
Device : SP-150 (SN 1235)
Address : USB
EC-Lab for windows v11.36 (software)
Internet server v11.36 (firmware)
Command interpretor v11.36 (firmware)
Electrode material : 
Initial state : 
Electrolyte : 
Comments : 
Current amplifier : SP-150B-20A
Electrode surface area : 0.001 cm�
Characteristic mass : 0.001 g
Equivalent Weight : 0.000 g/eq.
Density : 0.000 g/cm3
Cycle Definition : Charge/Discharge alternance

It would be really useful if this project could read these information from mpr files. Specifically, I really need the experiment method (Galvano Electrochemical Impedance Spectroscopy in the above example`).

[ilka-schulz]

I will try to solve this myself first. I might have an idea...