configuration-clh.toml.in

# Copyright (c) 2019 Ericsson Eurolab Deutschland GmbH
# Copyright (c) 2021 Adobe Inc.
#
# SPDX-License-Identifier: Apache-2.0
#

# XXX: WARNING: this file is auto-generated.
# XXX:
# XXX: Source file: "@CONFIG_CLH_IN@"
# XXX: Project:
# XXX:   Name: @PROJECT_NAME@
# XXX:   Type: @PROJECT_TYPE@

[hypervisor.clh]
path = "@CLHPATH@"
kernel = "@KERNELPATH_CLH@"
image = "@IMAGEPATH@"

# rootfs filesystem type:
#   - ext4 (default)
#   - xfs
#   - erofs
rootfs_type=@DEFROOTFSTYPE@

# Enable confidential guest support.
# Toggling that setting may trigger different hardware features, ranging
# from memory encryption to both memory and CPU-state encryption and integrity.
# The Kata Containers runtime dynamically detects the available feature set and
# aims at enabling the largest possible one, returning an error if none is
# available, or none is supported by the hypervisor.
#
# Known limitations:
# * Does not work by design:
#   - CPU Hotplug 
#   - Memory Hotplug
#   - NVDIMM devices
#
# Supported TEEs:
# * Intel TDX
#
# Default false
# confidential_guest = true

# Enable running clh VMM as a non-root user.
# By default clh VMM run as root. When this is set to true, clh VMM process runs as
# a non-root random user. See documentation for the limitations of this mode.
# rootless = true

# disable applying SELinux on the VMM process (default false)
disable_selinux=@DEFDISABLESELINUX@

# disable applying SELinux on the container process
# If set to false, the type `container_t` is applied to the container process by default.
# Note: To enable guest SELinux, the guest rootfs must be CentOS that is created and built
# with `SELINUX=yes`.
# (default: true)
disable_guest_selinux=@DEFDISABLEGUESTSELINUX@

# Path to the firmware.
# If you want Cloud Hypervisor to use a specific firmware, set its path below.
# This is option is only used when confidential_guest is enabled.
#
# For more information about firmwared that can be used with specific TEEs,
# please, refer to:
# * Intel TDX:
#   - td-shim: https://github.com/confidential-containers/td-shim
#
# firmware = "@FIRMWAREPATH@"

# List of valid annotation names for the hypervisor
# Each member of the list is a regular expression, which is the base name
# of the annotation, e.g. "path" for io.katacontainers.config.hypervisor.path"
enable_annotations = @DEFENABLEANNOTATIONS@

# List of valid annotations values for the hypervisor
# Each member of the list is a path pattern as described by glob(3).
# The default if not set is empty (all annotations rejected.)
# Your distribution recommends: @CLHVALIDHYPERVISORPATHS@
valid_hypervisor_paths = @CLHVALIDHYPERVISORPATHS@

# Optional space-separated list of options to pass to the guest kernel.
# For example, use `kernel_params = "vsyscall=emulate"` if you are having
# trouble running pre-2.15 glibc.
#
# WARNING: - any parameter specified here will take priority over the default
# parameter value of the same name used to start the virtual machine.
# Do not set values here unless you understand the impact of doing so as you
# may stop the virtual machine from booting.
# To see the list of default parameters, enable hypervisor debug, create a
# container and look for 'default-kernel-parameters' log entries.
kernel_params = "@KERNELPARAMS@"

# Default number of vCPUs per SB/VM:
# unspecified or 0                --> will be set to @DEFVCPUS@
# < 0                             --> will be set to the actual number of physical cores
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores      --> will be set to the actual number of physical cores
default_vcpus = 1

# Default maximum number of vCPUs per SB/VM:
# unspecified or == 0             --> will be set to the actual number of physical cores or to the maximum number
#                                     of vCPUs supported by KVM if that number is exceeded
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores      --> will be set to the actual number of physical cores or to the maximum number
#                                     of vCPUs supported by KVM if that number is exceeded
# WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when
# the actual number of physical cores is greater than it.
# WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU
# the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs
# can be added to a SB/VM, but the memory footprint will be big. Another example, with
# `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of
# vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable,
# unless you know what are you doing.
default_maxvcpus = @DEFMAXVCPUS@

# Default memory size in MiB for SB/VM.
# If unspecified then it will be set @DEFMEMSZ@ MiB.
default_memory = @DEFMEMSZ@

# Default memory slots per SB/VM.
# If unspecified then it will be set @DEFMEMSLOTS@.
# This is will determine the times that memory will be hotadded to sandbox/VM.
#memory_slots = @DEFMEMSLOTS@

# Default maximum memory in MiB per SB / VM
# unspecified or == 0           --> will be set to the actual amount of physical RAM
# > 0 <= amount of physical RAM --> will be set to the specified number
# > amount of physical RAM      --> will be set to the actual amount of physical RAM
default_maxmemory = @DEFMAXMEMSZ@

# Shared file system type:
#   - virtio-fs (default)
#   - virtio-fs-nydus
#   - none
shared_fs = "@DEFSHAREDFS_CLH_VIRTIOFS@"

# Path to vhost-user-fs daemon.
virtio_fs_daemon = "@DEFVIRTIOFSDAEMON@"

# List of valid annotations values for the virtiofs daemon
# The default if not set is empty (all annotations rejected.)
# Your distribution recommends: @DEFVALIDVIRTIOFSDAEMONPATHS@
valid_virtio_fs_daemon_paths = @DEFVALIDVIRTIOFSDAEMONPATHS@

# Default size of DAX cache in MiB
virtio_fs_cache_size = @DEFVIRTIOFSCACHESIZE@

# Default size of virtqueues
virtio_fs_queue_size = @DEFVIRTIOFSQUEUESIZE@

# Extra args for virtiofsd daemon
#
# Format example:
#   ["--arg1=xxx", "--arg2=yyy"]
# Examples:
#   Set virtiofsd log level to debug : ["--log-level=debug"]
# see `virtiofsd -h` for possible options.
virtio_fs_extra_args = @DEFVIRTIOFSEXTRAARGS@

# Cache mode:
#
#  - never
#    Metadata, data, and pathname lookup are not cached in guest. They are
#    always fetched from host and any changes are immediately pushed to host.
#
#  - auto
#    Metadata and pathname lookup cache expires after a configured amount of
#    time (default is 1 second). Data is cached while the file is open (close
#    to open consistency).
#
#  - always
#    Metadata, data, and pathname lookup are cached in guest and never expire.
virtio_fs_cache = "@DEFVIRTIOFSCACHE@"

# Block storage driver to be used for the hypervisor in case the container
# rootfs is backed by a block device. This is virtio-blk.
block_device_driver = "virtio-blk"

# Specifies cache-related options will be set to block devices or not.
# Default false
#block_device_cache_set = true

# Specifies cache-related options for block devices.
# Denotes whether use of O_DIRECT (bypass the host page cache) is enabled.
# Default false
#block_device_cache_direct = true

# Enable huge pages for VM RAM, default false
# Enabling this will result in the VM memory
# being allocated using huge pages.
#enable_hugepages = true

# Disable the 'seccomp' feature from Cloud Hypervisor, default false
# disable_seccomp = true

# Enable vIOMMU, default false
# Enabling this will result in the VM having a vIOMMU device
# This will also add the following options to the kernel's
# command line: iommu=pt
#enable_iommu = true

# This option changes the default hypervisor and kernel parameters
# to enable debug output where available.
#
# Default false
#enable_debug = true

# Enable hot-plugging of VFIO devices to a root-port.
# The default setting is  "no-port"
#hot_plug_vfio = "root-port"

# Path to OCI hook binaries in the *guest rootfs*.
# This does not affect host-side hooks which must instead be added to
# the OCI spec passed to the runtime.
#
# You can create a rootfs with hooks by customizing the osbuilder scripts:
# https://github.com/kata-containers/kata-containers/tree/main/tools/osbuilder
#
# Hooks must be stored in a subdirectory of guest_hook_path according to their
# hook type, i.e. "guest_hook_path/{prestart,poststart,poststop}".
# The agent will scan these directories for executable files and add them, in
# lexicographical order, to the lifecycle of the guest container.
# Hooks are executed in the runtime namespace of the guest. See the official documentation:
# https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks
# Warnings will be logged if any error is encountered while scanning for hooks,
# but it will not abort container execution.
#guest_hook_path = "/usr/share/oci/hooks"
#
# These options are related to network rate limiter at the VMM level, and are
# based on the Cloud Hypervisor I/O throttling.  Those are disabled by default
# and we strongly advise users to refer the Cloud Hypervisor official
# documentation for a better understanding of its internals:
# https://github.com/cloud-hypervisor/cloud-hypervisor/blob/main/docs/io_throttling.md
# 
# Bandwidth rate limiter options
# 
# net_rate_limiter_bw_max_rate controls network I/O bandwidth (size in bits/sec
# for SB/VM).
# The same value is used for inbound and outbound bandwidth.
# Default 0-sized value means unlimited rate.
#net_rate_limiter_bw_max_rate = 0
#
# net_rate_limiter_bw_one_time_burst increases the initial max rate and this
# initial extra credit does *NOT* affect the overall limit and can be used for
# an *initial* burst of data.
# This is *optional* and only takes effect if net_rate_limiter_bw_max_rate is
# set to a non zero value.
#net_rate_limiter_bw_one_time_burst = 0
#
# Operation rate limiter options
#
# net_rate_limiter_ops_max_rate controls network I/O bandwidth (size in ops/sec
# for SB/VM).
# The same value is used for inbound and outbound bandwidth.
# Default 0-sized value means unlimited rate.
#net_rate_limiter_ops_max_rate = 0
#
# net_rate_limiter_ops_one_time_burst increases the initial max rate and this
# initial extra credit does *NOT* affect the overall limit and can be used for
# an *initial* burst of data.
# This is *optional* and only takes effect if net_rate_limiter_bw_max_rate is
# set to a non zero value.
#net_rate_limiter_ops_one_time_burst = 0
#
# These options are related to disk rate limiter at the VMM level, and are
# based on the Cloud Hypervisor I/O throttling.  Those are disabled by default
# and we strongly advise users to refer the Cloud Hypervisor official
# documentation for a better understanding of its internals:
# https://github.com/cloud-hypervisor/cloud-hypervisor/blob/main/docs/io_throttling.md
# 
# Bandwidth rate limiter options
# 
# disk_rate_limiter_bw_max_rate controls disk I/O bandwidth (size in bits/sec
# for SB/VM).
# The same value is used for inbound and outbound bandwidth.
# Default 0-sized value means unlimited rate.
#disk_rate_limiter_bw_max_rate = 0
#
# disk_rate_limiter_bw_one_time_burst increases the initial max rate and this
# initial extra credit does *NOT* affect the overall limit and can be used for
# an *initial* burst of data.
# This is *optional* and only takes effect if disk_rate_limiter_bw_max_rate is
# set to a non zero value.
#disk_rate_limiter_bw_one_time_burst = 0
#
# Operation rate limiter options
#
# disk_rate_limiter_ops_max_rate controls disk I/O bandwidth (size in ops/sec
# for SB/VM).
# The same value is used for inbound and outbound bandwidth.
# Default 0-sized value means unlimited rate.
#disk_rate_limiter_ops_max_rate = 0
#
# disk_rate_limiter_ops_one_time_burst increases the initial max rate and this
# initial extra credit does *NOT* affect the overall limit and can be used for
# an *initial* burst of data.
# This is *optional* and only takes effect if disk_rate_limiter_bw_max_rate is
# set to a non zero value.
#disk_rate_limiter_ops_one_time_burst = 0

[agent.@PROJECT_TYPE@]
# If enabled, make the agent display debug-level messages.
# (default: disabled)
#enable_debug = true

# Enable agent tracing.
#
# If enabled, the agent will generate OpenTelemetry trace spans.
#
# Notes:
#
# - If the runtime also has tracing enabled, the agent spans will be
#   associated with the appropriate runtime parent span.
# - If enabled, the runtime will wait for the container to shutdown,
#   increasing the container shutdown time slightly.
#
# (default: disabled)
#enable_tracing = true

# Enable debug console.

# If enabled, user can connect guest OS running inside hypervisor
# through "kata-runtime exec <sandbox-id>" command

#debug_console_enabled = true

# Agent connection dialing timeout value in seconds
# (default: 45)
dial_timeout = 45

[runtime]
# If enabled, the runtime will log additional debug messages to the
# system log
# (default: disabled)
#enable_debug = true
#
# Internetworking model
# Determines how the VM should be connected to the
# the container network interface
# Options:
#
#   - macvtap
#     Used when the Container network interface can be bridged using
#     macvtap.
#
#   - none
#     Used when customize network. Only creates a tap device. No veth pair.
#
#   - tcfilter
#     Uses tc filter rules to redirect traffic from the network interface
#     provided by plugin to a tap interface connected to the VM.
#
internetworking_model="@DEFNETWORKMODEL_CLH@"

# disable guest seccomp
# Determines whether container seccomp profiles are passed to the virtual
# machine and applied by the kata agent. If set to true, seccomp is not applied
# within the guest
# (default: true)
disable_guest_seccomp=@DEFDISABLEGUESTSECCOMP@

# Apply a custom SELinux security policy to the container process inside the VM.
# This is used when you want to apply a type other than the default `container_t`,
# so general users should not uncomment and apply it.
# (format: "user:role:type")
# Note: You cannot specify MCS policy with the label because the sensitivity levels and
# categories are determined automatically by high-level container runtimes such as containerd.
#guest_selinux_label="@DEFGUESTSELINUXLABEL@"

# If enabled, the runtime will create opentracing.io traces and spans.
# (See https://www.jaegertracing.io/docs/getting-started).
# (default: disabled)
#enable_tracing = true

# Set the full url to the Jaeger HTTP Thrift collector.
# The default if not set will be "http://localhost:14268/api/traces"
#jaeger_endpoint = ""

# Sets the username to be used if basic auth is required for Jaeger.
#jaeger_user = ""

# Sets the password to be used if basic auth is required for Jaeger.
#jaeger_password = ""

# If enabled, the runtime will not create a network namespace for shim and hypervisor processes.
# This option may have some potential impacts to your host. It should only be used when you know what you're doing.
# `disable_new_netns` conflicts with `internetworking_model=tcfilter` and `internetworking_model=macvtap`. It works only
# with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge
# (like OVS) directly.
# (default: false)
#disable_new_netns = true

# if enabled, the runtime will add all the kata processes inside one dedicated cgroup.
# The container cgroups in the host are not created, just one single cgroup per sandbox.
# The runtime caller is free to restrict or collect cgroup stats of the overall Kata sandbox.
# The sandbox cgroup path is the parent cgroup of a container with the PodSandbox annotation.
# The sandbox cgroup is constrained if there is no container type annotation.
# See: https://pkg.go.dev/github.com/kata-containers/kata-containers/src/runtime/virtcontainers#ContainerType
sandbox_cgroup_only=@DEFSANDBOXCGROUPONLY@

# If enabled, the runtime will attempt to determine appropriate sandbox size (memory, CPU) before booting the virtual machine. In
# this case, the runtime will not dynamically update the amount of memory and CPU in the virtual machine. This is generally helpful
# when a hardware architecture or hypervisor solutions is utilized which does not support CPU and/or memory hotplug.
# Compatibility for determining appropriate sandbox (VM) size:
# - When running with pods, sandbox sizing information will only be available if using Kubernetes >= 1.23 and containerd >= 1.6. CRI-O
#   does not yet support sandbox sizing annotations.
# - When running single containers using a tool like ctr, container sizing information will be available.
static_sandbox_resource_mgmt=@DEFSTATICRESOURCEMGMT_CLH@

# If specified, sandbox_bind_mounts identifieds host paths to be mounted (ro) into the sandboxes shared path.
# This is only valid if filesystem sharing is utilized. The provided path(s) will be bindmounted into the shared fs directory.
# If defaults are utilized, these mounts should be available in the guest at `/run/kata-containers/shared/containers/sandbox-mounts`
# These will not be exposed to the container workloads, and are only provided for potential guest services.
sandbox_bind_mounts=@DEFBINDMOUNTS@

# VFIO Mode
# Determines how VFIO devices should be be presented to the container.
# Options:
#
#  - vfio
#    Matches behaviour of OCI runtimes (e.g. runc) as much as
#    possible.  VFIO devices will appear in the container as VFIO
#    character devices under /dev/vfio.  The exact names may differ
#    from the host (they need to match the VM's IOMMU group numbers
#    rather than the host's)
#
#  - guest-kernel
#    This is a Kata-specific behaviour that's useful in certain cases.
#    The VFIO device is managed by whatever driver in the VM kernel
#    claims it.  This means it will appear as one or more device nodes
#    or network interfaces depending on the nature of the device.
#    Using this mode requires specially built workloads that know how
#    to locate the relevant device interfaces within the VM.
#
vfio_mode="@DEFVFIOMODE@"

# If enabled, the runtime will not create Kubernetes emptyDir mounts on the guest filesystem. Instead, emptyDir mounts will
# be created on the host and shared via virtio-fs. This is potentially slower, but allows sharing of files from host to guest.
disable_guest_empty_dir=@DEFDISABLEGUESTEMPTYDIR@

# Enabled experimental feature list, format: ["a", "b"].
# Experimental features are features not stable enough for production,
# they may break compatibility, and are prepared for a big version bump.
# Supported experimental features:
# (default: [])
experimental=@DEFAULTEXPFEATURES@

# If enabled, user can run pprof tools with shim v2 process through kata-monitor.
# (default: false)
# enable_pprof = true

# Indicates the CreateContainer request timeout needed for the workload(s)
# It using guest_pull this includes the time to pull the image inside the guest
# Defaults to @DEFCREATECONTAINERTIMEOUT@ second(s)  
# Note: The effective timeout is determined by the lesser of two values: runtime-request-timeout from kubelet config 
# (https://kubernetes.io/docs/reference/command-line-tools-reference/kubelet/#:~:text=runtime%2Drequest%2Dtimeout) and create_container_timeout. 
# In essence, the timeout used for guest pull=runtime-request-timeout<create_container_timeout?runtime-request-timeout:create_container_timeout.
create_container_timeout = @DEFCREATECONTAINERTIMEOUT@