- How do I get started
- Requirements
- Local Development Guide
- Server Infrastructure
- Deployment Advice
- License
Visit https://forwardemail.net to get started!
See Requirements and Local Development Guide below.
-
Install n and Node v18.20.4:
curl -L https://raw.githubusercontent.com/mklement0/n-install/stable/bin/n-install | bash -s -- -y 18.20.4
-
Ensure that you are running on Node v18.20.4:
node --version v18.20.4
-
Install brew and the following dependencies using
brew
command:brew tap mongodb/brew brew install mongodb-community redis libtool automake autoconf nasm brew services start mongodb-community brew services start redis
-
Install pnpm:
corepack enable corepack prepare pnpm@latest --activate
-
Clone your fork locally (replace
forwardemail
with your username):git clone git@github.com:forwardemail/forwardemail.net.git cd forwardemail.net
-
Install npm dependencies:
pnpm install
-
Install wkhtmltopdf (optional: only used for generating PDF receipts)
-
Install n and Node v18.20.4:
curl -L https://raw.githubusercontent.com/mklement0/n-install/stable/bin/n-install | bash -s -- -y 18.20.4
-
Ensure that you are running on Node v18.20.4:
node --version v18.20.4
-
Install pnpm:
corepack enable corepack prepare pnpm@latest --activate
-
Clone your fork locally (replace
forwardemail
with your username):git clone git@github.com:forwardemail/forwardemail.net.git cd forwardemail.net
-
Install npm dependencies:
pnpm install
-
Install fonts:
echo ttf-mscorefonts-installer msttcorefonts/accepted-mscorefonts-eula select true | sudo debconf-set-selections
sudo apt-get install xfonts-75dpi fontconfig libxrender1 xfonts-base ttf-mscorefonts-installer libfontconfig fonts-powerline
-
Install wkhtmltopdf (optional: only used for generating PDF receipts):
wget "https://github.com/wkhtmltopdf/packaging/releases/download/0.12.6.1-2/wkhtmltox_0.12.6.1-2.$(lsb_release -c -s)_$(dpkg --print-architecture).deb" sudo dpkg -i "wkhtmltox_0.12.6.1-2.$(lsb_release -c -s)_$(dpkg --print-architecture).deb"
-
Install MongoDB by following the guide at https://www.mongodb.com/docs/manual/tutorial/install-mongodb-on-ubuntu/#install-mongodb-community-edition
-
Install Redis by following the guide at https://www.digitalocean.com/community/tutorials/how-to-install-and-secure-redis-on-ubuntu-20-04.
Once you have followed Requirements, you should now have all the dependencies, repository, and npm packages installed.
You can start any of the services using our pre-built commands to make it easy. Note that all of these pre-built commands are using nps.
Service Name | Command | Default Development Port | Development Preview URL |
---|---|---|---|
Web | npm start web |
3000 |
http://localhost:3000 |
API | npm start api |
4000 |
http://localhost:4000 |
Bree | npm start bree |
None | None |
SMTP | npm start smtp |
2432 |
telnet localhost 2432 |
MX | npm start mx |
2525 |
telnet localhost 2525 |
IMAP | npm start imap |
2113 |
telnet localhost 2113 |
POP3 | npm start pop3 |
2115 |
telnet localhost 2115 |
SQLite | npm start sqlite |
3456 |
telnet localhost 3456 |
CalDAV | npm start caldav |
5000 |
http://localhost:5000 |
You can test the local SMTP, IMAP, POP3, and CalDAV servers using Thunderbird, telnet
, or openssl
. Note that all local development servers do not require TLS and are running with { rejectUnauthorized: true }
option passed to TLS server configurations.
Try running the local web server:
npm start webAndWatch
It should open a new tab for you with the local web server running and terminal output using signale. You can now open your browser to http://localhost:3000 for a development playground.
You can also run all apps at once:
npm start all
Note that if you open your browser to http://localhost:3000 and no assets are rendering, then you must have forgotten to run a build beforehand. You can run builds manually by running npm run build
.
An easy way to kill all existing Node apps running is by typing killall node
.
Our server alias naming convention consists of the following fields, joined together by a hyphen, and converted to lower case:
- App name (e.g. "web", "api", "bree", "smtp", "imap", "pop3", "sqlite", or "caldav")
- (Optional) App count (starting with 1) of the application (relative to the same provider and region). Only applicable for apps with potential count > 1.
- Provider name (abbreviated to 2 characters, e.g. "do" for "Digital Ocean", but you can optionally use more verbose for providers such as "Vultr" as "vultr")
- Region name (this is the region name given by the provider, e.g. "sfo3" for DO's SFO3 region)
For example, one of our web servers is named web-do-sfo3
and another is web-vultr-dallas
.
All server aliases with the same hostname (with a minimum count of at least 2) are set in Cloudflare under a geo-located load balancer.
Unless otherwise noted, all of the servers should have dedicated CPU's and not be running in a shared CPU environment.
See the ansible folder for our Ansible configuration and playbooks, which we use to provision servers with.
We recommend you to install yamllint and configure it in your editor while working with Ansible playbooks.
Also note that ansible-lint is a helpful linting tool you can use if you plan on making changes to playbooks. Note that our current playbooks have several existing lint errors.
First you must provision Ubuntu 18.04 LTS 64-bit server(s) using Digital Ocean, Linode, Vultr, or your host of choice. These newly provisioned server(s) should have your SSH key automatically added.
Follow the Deployment guide below for automatic provisioning and deployment instructions.
-
Ensure that you have pm2 installed locally:
npm i -g pm2
-
Ensure that you have ansible and ansible-lint installed locally:
For macOS:
brew install ansible ansible-lint
For Ubuntu:
sudo apt-add-repository ppa:ansible/ansible sudo apt update sudo apt install ansible pip3 install ansible-lint
-
Install ansible-galaxy requirements (assumes current working directory is the root of this repository):
ansible-galaxy install -r ansible/requirements.yml
-
Set up host configuration by copying the
hosts.yml
file template:cp ansible/playbooks/templates/hosts.yml hosts.yml
-
Edit this configuration and update the file with your newly created server aliases and IP addresses. You can add more than one host to each group if you are setting up load balancing. Refer to the Naming Convention documentation for our recommended approach to server alias naming. Note that this file is automatically ignored by git. If you have a private repository and would like to commit this, then remove
hosts.yml
from the root.gitignore
file.vim hosts.yml
-
Set up environment configuration by copying the
env
file template:cp ansible/playbooks/templates/env .env.production
-
Edit this configuration and reference the official Lad documentation for a list of all available environment variables (or see .env.defaults). You will need to open this file in your preferred editor and set the values for any fields containing
TODO
, whereby you replaceTODO
with the appropriate value. Preserve double quotes where they are already defined.vim .env.production
-
Generate pm2 ecosystem files using our automatic template generator. We created an ansible-playbook.js which loads the
.env.production
environment variables rendered with @ladjs/env intoprocess.env
, which then gets used in the playbooks. This is a superior, simple, and the only known dotenv approach we know of in Ansible. Newly createdecosystem-api.json
,ecosystem-bree.json
,ecosystem-web.json
,ecosystem-smtp.json
,ecosystem-imap.json
,ecosystem-pop3.json
,ecosystem-sqlite.json
, andecosystem-caldav.json
files will now be created for you in the root of the repository. If you ever more add or change IP addresses, you can simply re-run this command.node ansible-playbook ansible/playbooks/ecosystem.yml -l 'localhost'
-
Set up the web, API, and CalDAV server(s) (see patterns and ansible-playbook flags docs if you need help). If you completely (or partially) run this playbook (or any others below), then the second time you try to run it may not succeed. This is because we prevent root user access through security hardening. To workaround this, run the same command but without
--user root
appended as it will default to thedevops
user created.node ansible-playbook ansible/playbooks/http.yml --user root -l 'http'
-
Set up the Bree server(s):
node ansible-playbook ansible/playbooks/bree.yml --user root -l 'bree'
-
Set up the SMTP server(s):
node ansible-playbook ansible/playbooks/smtp.yml --user root -l 'smtp'
-
Set up the IMAP server(s):
node ansible-playbook ansible/playbooks/imap.yml --user root -l 'imap'
-
Set up the POP3 server(s):
node ansible-playbook ansible/playbooks/pop3.yml --user root -l 'pop3'
-
Set up the SQLite server(s):
node ansible-playbook ansible/playbooks/sqlite.yml --user root -l 'sqlite'
-
Set up the MX server(s):
node ansible-playbook ansible/playbooks/mx1.yml --user root -l 'mx1' node ansible-playbook ansible/playbooks/mx2.yml --user root -l 'mx2'
-
Set up GitHub deployment keys for all the servers. Note that the
deployment-keys
directory is ignored from git, so if you have a private repository and wish to commit it, then removedeployment-keys
from the.gitignore
file.node ansible-playbook ansible/playbooks/deployment-keys.yml -l 'imap:pop3:smtp:http:bree:sqlite' --user deploy
-
Go to your repository "Settings" page on GitHub, click on "Deploy keys", and then add a deployment key for each servers' deployment key copied to the
deployment-keys
directory. If you're on macOS, you can use thepbcopy
command to copy each file's contents to your clipboard. Use tab completion for speed, and replace the server names and paths with yours. You can also use thegh
CLI at https://cli.github.com/manual/gh_repo_deploy-key_add as shown below (switch the repo/org/repo paths and deployment key paths below to yours):gh repo deploy-key add deployment-keys/api-do-sf-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/api-vu-sj-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/web-do-sf-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/web-vu-sj-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/bree-vu-sj-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/smtp-vu-sj-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/smtp-vu-mi-fl.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/imap-vu-sj-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/imap-do-am-nl.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/pop3-vu-sj-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/sqlite-do-sf-ca.pub -R forwardemail/forwardemail.net gh repo deploy-key add deployment-keys/caldav-do-sf-ca.pub -R forwardemail/forwardemail.net
-
Set up PM2 deployment directories on all the servers:
pm2 deploy ecosystem-web.json production setup
pm2 deploy ecosystem-api.json production setup
pm2 deploy ecosystem-bree.json production setup
pm2 deploy ecosystem-smtp.json production setup
pm2 deploy ecosystem-imap.json production setup
pm2 deploy ecosystem-pop3.json production setup
pm2 deploy ecosystem-sqlite.json production setup
pm2 deploy ecosystem-caldav.json production setup
-
Create a SSL certificate at Namecheap (we recommend a 5 year wildcard certificate), set up the certificate, and download and extract the ZIP file with the certificate (emailed to you) to your computer. We do not recommend using tools like LetsEncrypt and
certbot
due to complexity when you have (or scale to) a cluster of servers set up behind load balancers. In other words, we've tried approaches likelsyncd
in combination withcrontab
forcertbot
renewals and automatic checking. Furthermore, using this exposes the server(s) to downtime as ports80
and443
may need to be shut down so thatcertbot
can use them for certificate generation. This is not a reliable approach, and simply renewing certificates once a year is vastly simpler and also makes using load balancers trivial. Instead you can use a provider like Namecheap to get a cheap SSL certificate, then run a few commands as we've documented below. This command will prompt you for an absolute file path to the certificates you downloaded. Renewed your certificate after 1 year? Simply follow this step again. Do not set a password on the certificate files. When using theopenssl
command (see Namecheap instructions), you need to use*.example.com
with an asterisk followed by a period if you are registering a wildcard certificate.node ansible-playbook ansible/playbooks/certificates.yml --user deploy
Important: If you renew or change certificates in the future, then after running the previous command, you will subsequently need to reload the processes as such:
# # NOTE: See the "Important" note above BEFORE running this command. # This command ONLY APPLIES for certificate renewals/changes. # pm2 deploy ecosystem-web.json production exec "pm2 reload all" pm2 deploy ecosystem-api.json production exec "pm2 reload all" pm2 deploy ecosystem-smtp.json production exec "pm2 reload all" pm2 deploy ecosystem-imap.json production exec "pm2 reload all" pm2 deploy ecosystem-pop3.json production exec "pm2 reload all" pm2 deploy ecosystem-sqlite.json production exec "pm2 reload all" pm2 deploy ecosystem-caldav.json production exec "pm2 reload all"
-
Create a DKIM key for your domain name (must match
WEB_HOST
environment variable) with a default selector ofdefault
(must matchDKIM_KEY_SELECTOR
environment variable). Then upload it to the servers:node ansible-playbook ansible/playbooks/dkim.yml --user deploy
-
(Optional) Create a Google application credentials profile file and store it locally. You only need this if you want to support automatic translation. The following command will prompt you for the absolute file path (e.g.
/path/to/client-profile.json
). See the mandarin docs for more information.node ansible-playbook ansible/playbooks/gapp-creds.yml -l 'imap:pop3:smtp:http:bree:sqlite' --user deploy
-
(Optional) Copy over custom TTF or OTF fonts to be installed on the server (e.g. used for PDF rendering, rendering with Sharp, open-graph images, etc):
node ansible-playbook ansible/playbooks/fonts.yml -l 'imap:pop3:smtp:http:bree:sqlite' --user deploy
Note that at the time of this writing we copy these files:
inconsolata-dz.otf
VCHoney-Bold.otf
VCHoney-Regular.otf
VCHoney-SemiBold.otf
-
(Optional) Copy over GPG keys to be installed on the server (e.g. used for GPG signing
security.txt
, see https://forwardemail.net/security.txt).NOTE: This assumes that you have also set in
.env
file the keys ofGPG_SECURITY_KEY
with the full file path to the key andGPG_SECURITY_PASSPHRASE
with the GPG passphrase. You can export viagpg --armor --export-secret-key YOURKEYIDHERE > .gpg-security-key
. You can getYOURKEYIDHERE
viagpg --list-keys
. You can generate a key withgpg --full-generate-key
(e.g. forsupport@yourdomain.com
orsecurity@yourdomain.com
). Note you should also update the path inconfig/index.js
foropenPGPKey
value.node ansible-playbook ansible/playbooks/gpg-security-key.yml -l 'imap:pop3:smtp:http:bree:sqlite' --user deploy
-
Copy the
.env.production
to the servers:node ansible-playbook ansible/playbooks/env.yml -l 'imap:pop3:smtp:http:bree:sqlite' --user deploy
-
Run an initial deploy to all the servers:
pm2 deploy ecosystem-web.json production
pm2 deploy ecosystem-api.json production
pm2 deploy ecosystem-bree.json production
pm2 deploy ecosystem-smtp.json production
pm2 deploy ecosystem-imap.json production
pm2 deploy ecosystem-pop3.json production
pm2 deploy ecosystem-sqlite.json production
pm2 deploy ecosystem-caldav.json production
-
Save the process list on the servers so when if the server were to reboot, it will automatically boot back up the processes:
pm2 deploy ecosystem-web.json production exec "pm2 save"
pm2 deploy ecosystem-api.json production exec "pm2 save"
pm2 deploy ecosystem-bree.json production exec "pm2 save"
pm2 deploy ecosystem-smtp.json production exec "pm2 save"
pm2 deploy ecosystem-imap.json production exec "pm2 save"
pm2 deploy ecosystem-pop3.json production exec "pm2 save"
pm2 deploy ecosystem-sqlite.json production exec "pm2 save"
pm2 deploy ecosystem-caldav.json production exec "pm2 save"
-
Test by visiting your web and API server in your browser (click "proceed to unsafe" site and bypass certificate warning).
-
Configure your DNS records for the web and API server hostnames and respective IP addresses.
-
Test by visiting your web and API server in your browser (in an incognito window). There should not be any certificate warnings (similar to the one that occurred in step 15).
-
(Optional) Remove the local
.env.production
file for security purposes. If you do this, then make sure you have a backup, or securely back up off the server in the future before destroying the server.rm .env.production
-
(Optional) Remove the local certificate files you downloaded locally and specified in step 11. If you do this, then make sure you have a backup, or securely back up off the server in the future before destroying the server.
-
Finished. If you need to deploy again, then push your changes to GitHub
master
branch and then follow step 14 again. We recommend you to read the Ansible getting started guide, as it provides you with insight into commands likeansible all -a "echo hello"
which can be run across all or specific servers.
If you do not change any assets, then there is no reason to do a full deployment.
For example, if you made changes to a web controller, then you only need to deploy it to the web codebase without a build:
pm2 deploy ecosystem-web.json production exec "git reset --hard HEAD && git pull origin master && pm2 reload all"