diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt +++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/bg_BG/installing-boot9strap-(ntrboot).txt b/_pages/bg_BG/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/bg_BG/installing-boot9strap-(ntrboot).txt +++ b/_pages/bg_BG/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt +++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/de_DE/include/winerror234.txt b/_pages/de_DE/include/winerror234.txt index 3043dceec1185..e1ea948c4d1d3 100644 --- a/_pages/de_DE/include/winerror234.txt +++ b/_pages/de_DE/include/winerror234.txt @@ -7,24 +7,24 @@ This occurs because of the beta UTF-8 support in Windows. You must disable it to 1. Hit **Windows Key + R** to open up the Run dialogue, type `intl.cpl` then click "OK" -![Run](/images/screenshots/troubleshooting/234run.png) -{: .notice--info} + ![Run](/images/screenshots/troubleshooting/234run.png) + {: .notice--info} 1. Click on `Administrative`, then `Change System Locale` -![Region](/images/screenshots/troubleshooting/234region.png) -{: .notice--info} -![Administrative](/images/screenshots/troubleshooting/234administrative.png) -{: .notice--info} + ![Region](/images/screenshots/troubleshooting/234region.png) + {: .notice--info} + ![Administrative](/images/screenshots/troubleshooting/234administrative.png) + {: .notice--info} 1. Uncheck the box next to `Beta: Use Unicode UTF-8 for worldwide language support` then click "OK" -![Locale](/images/screenshots/troubleshooting/234locale.png) -{: .notice--info} + ![Locale](/images/screenshots/troubleshooting/234locale.png) + {: .notice--info} 1. Click "Restart Now" -![Restart](/images/screenshots/troubleshooting/234restart.png) -{: .notice--info} + ![Restart](/images/screenshots/troubleshooting/234restart.png) + {: .notice--info} After your PC has rebooted, try creating the MSET9 ID1 again. diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt index 6c15cd42b3aaf..c51c91fce9a10 100644 --- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt +++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser S + Die SD-Karte deines 3DS, *nicht* die SD-Karte deiner Flashkarte 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser S 1. Insert your console's SD card into your computer 1. Lösche `boot.firm` aus dem Stammverzeichnis deiner SD-Karte -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Stecke deine SD-Karte wieder in deine Konsole 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt index 3aa0525970357..59cc3aa18d782 100644 --- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt +++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ title: "Εγκατάσταση του boot9strap (ntrboot)" + Αυτή είναι η κάρτα SD από το 3DS σας, *όχι* η κάρτα SD από τη flashcart σας 1. Αντιγράψτε το `SafeB9SInstaller.firm` από το αρχείο `.zip` του SafeB9SInstaller στη ρίζα της κάρτας SD σας και μετονομάστε το σε `boot.firm` + Η ρίζα της κάρτας SD είναι ο αρχικός κατάλογος της κάρτας SD σας, όπου μπορείτε να δείτε τον φάκελο «Nintendo 3DS», αλλά χωρίς να βρίσκεστε μέσα σε αυτόν -1. Αντιγράψτε το `boot.3dsx` από το αρχείο `.zip` του Luma3DS στη ρίζα της κάρτας SD της κονσόλας σας 1. Δημιουργήστε έναν φάκελο με το όνομα `boot9strap` στη ρίζα της κάρτας SD της κονσόλας σας 1. Αντιγράψτε τα `boot9strap.firm` και `boot9strap.firm.sha` από το αρχείο `.zip` του boot9strap στον φάκελο `/boot9strap/` της κάρτας SD της κονσόλας σας @@ -57,7 +56,7 @@ title: "Εγκατάσταση του boot9strap (ntrboot)" 1. Εισαγάγετε την κάρτα SD της κονσόλας σας στον υπολογιστή σας 1. Διαγράψτε το `boot.firm` από τη ρίζα της κάρτας SD σας -1. Αντιγράψτε το `boot.firm` από το αρχείο `.zip` του Luma3DS στη ρίζα της κάρτας SD σας +1. Αντιγράψτε τα `boot.firm` και `boot.3dsx` από το αρχείο `.zip` του Luma3DS στη ρίζα της κάρτας SD σας 1. Εισαγάγετε ξανά την κάρτα SD στην κονσόλα σας 1. Ενεργοποιήστε την κονσόλα σας {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt index 3f0beed509f40..46fb92b1d6201 100644 --- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt index 0db4fc023998d..f421994a6286b 100644 --- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + Esta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart 1. Copia `SafeB9SInstaller.firm` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD y renómbralo a `boot.firm` + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella -1. Copia el archivo `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de la tarjeta SD de tu consola 1. Crea una carpeta llamada `boot9strap` en la raíz de la tarjeta SD de tu consola 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en la tarjeta SD de tu consola @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Inserta la tarjeta SD de tu consola en tu computadora 1. Elimina `boot.firm` desde la raíz de tu tarjeta SD -1. Copia el archivo `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD +1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt index 6ab8ed0ab3ed4..7fc004a27134d 100644 --- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt +++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + Tämä tarkoittaa siis 3DS:si SD-korttia, *ei* flash-korttisi SD-korttia 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Poista `boot.firm` SD-korttisi juuresta -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt index 80ef706a39c8a..d0cbeff55f884 100644 --- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt +++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ Pour utiliser les liens [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) s + Ceci signifie la carte SD de votre 3DS, et *non* la carte SD de votre linker 1. Copiez `SafeB9SInstaller.firm` depuis le fichier `.zip` de SafeB9SInstaller vers la racine de votre carte SD, et renommez-le en `boot.firm` + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier -1. Copiez `boot.3dsx` depuis le fichier `.zip` de Luma3DS vers la racine de votre carte SD 1. Créez un dossier nommé `boot9strap` à la racine de votre carte SD 1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier `.zip` de boot9strap vers le dossier `/boot9strap/` sur votre carte SD @@ -57,7 +56,7 @@ Pour utiliser les liens [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) s 1. Insérez la carte SD de votre console dans votre ordinateur 1. Supprimez le fichier `boot.firm` de la racine de votre carte SD s'il existe -1. Copiez `boot.firm` du fichier `.zip` de Luma3DS vers la racine de votre carte SD +1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD 1. Réinsérez votre carte SD dans votre console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt index 36cc035f2a1c0..76d80beaf121a 100644 --- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt +++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. תמחקו את`boot.firm` מכרטיס הSD שלכם -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt +++ b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt index 11686684ca479..39dbd8cfbd9f8 100644 --- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt +++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme + Ez a 3DS-ed SD kártyája, *nem* a flashkártyádé 1. Másold a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe, majd nevezd át `boot.firm`-re + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne -1. Másold át a `boot.3dsx` fájlt a Luma3DS `.zip`-ből a konzolod SD kártyájának gyökerébe 1. Hozz létre egy mappát `boot9strap` néven a konzolod SD kártyájának a gyökerében 1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból a konzolod SD kártyájának `/boot9strap/` mappájába @@ -57,7 +56,7 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme 1. Helyezd a konzolod SD kártyáját a számítógépedbe 1. Töröld a `boot.firm` fájlt az SD kártyád gyökeréből -1. Másold át a `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Tedd vissza az SD kártyád a konzoldba 1. Kapcsold be a konzolod {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt +++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt index 2458aacbefae5..f9ed1cbd3b563 100644 --- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt +++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest + Questa è la scheda SD del tuo 3DS, *non* la scheda SD della tua flashcart 1. Copia il file `SafeB9SInstaller.firm` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD e rinominalo in `boot.firm` + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno -1. Copia il file `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della scheda SD della tua console 1. Crea una cartella chiamata `boot9strap` nella directory principale della scheda SD della tua console 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della scheda SD della tua console @@ -57,7 +56,7 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest 1. Inserisci la scheda SD della console nel tuo computer 1. Elimina il file `boot.firm` dalla directory principale della tua scheda SD -1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Reinserisci la scheda SD nella tua console 1. Accendi la tua console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt index ebfe0d4a699bf..cb4acaa773bde 100644 --- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt +++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + 3DSのSDカードです。フラッシュカードのSDカードではありません。 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。 -1. Luma3DS `.zip` から `boot.3dsx` をコンソールのSDカードのルートにコピーします 1. `boot9strap`という名前のフォルダをコンソールのSDカードのルート上に作成します。 1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、コンソールのSD カードのboot9strapフォルダにコピーします。 @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. SDカードのルートにある既存の`boot.firm`を削除します -1. Luma3DS `.zip` から `boot.firm` をSDカードのルートにコピーします +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt index a86ff05e6da5f..36a6b73eb93ae 100644 --- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt +++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt @@ -26,7 +26,6 @@ title: "boot9strap 설치 (ntrboot)" + 이것은 3DS의 SD 카드이며, 플래시카트의 SD 카드가 아닙니다 1. SafeB9SInstaller `.zip`의 `SafeB9SInstaller.firm`을 SD 카드의 루트에 복사하고 `boot.firm`으로 이름 변경해 주세요 + SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다 -1. Luma3DS `.zip`안에 있는 `boot.3dsx`을 SD 카드의 루트에 복사해 주세요 1. SD 카드이 루트에 `boot9strap` 라는 이름으로 새 폴더를 생성해 주세요 1. SD 카드에 있는 `/boot9strap/` 폴더에 boot9strap `.zip` 파일 안에 압축되있는 `boot9strap.firm`과 `boot9strap.firm.sha`을 복사해 주세요 @@ -58,7 +57,7 @@ title: "boot9strap 설치 (ntrboot)" 1. 콘솔의 SD 카드를 컴퓨터에 삽입해 주세요 1. `boot.firm` 파일을 SD 카드의 루트에서 삭제해 주세요 -1. Luma3DS `.zip`안에 있는 `boot.firm`을 SD 카드의 루트에 복사해 주세요 +1. Luma3DS `.zip`안에 있는 `boot.firm`과 `boot.3dsx`를 SD 카드의 루트에 복사해 주세요 1. SD 카드를 콘솔에 다시 삽입해 주세요 1. 콘솔의 전원을 켜 주세요 {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt index f6f779e0bb0f9..6bfc0fc70243b 100644 --- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt +++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt index f491fe0f39fd7..b3dcdf19a3ed6 100644 --- a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt +++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin + Dit is de SD kaart van je 3DS, *niet* de SD kaart van je flashkaart 1. Kopieer `SafeB9SInstaller.firm` van de SafeB9SInstaller `.zip` naar de hoofdmap van je SD-kaart en hernoem het naar `boot.firm` + De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden -1. Kopieer `boot.3dsx` van de Luma3DS `.zip` naar de hoofdmap van de SD kaart van je console 1. Maak een map genaamd `boot9strap` op de hoofdmap van de SD kaart van je console 1. Kopieer `boot9strap.firm` en `boot9strap.firm.sha` van de boot9strap `.zip` naar de `/boot9strap/` map op de SD kaart van je console @@ -57,7 +56,7 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin 1. Plaats de SD-kaart van je console in je computer 1. Verwijder`boot.firm' en '' van de hoofdmap van uw SD-kaart -1. Kopieer `boot.firm` van de Luma3DS `.zip` naar de hoofdmap van je SD kaart +1. Kopieer `boot.firm` en `boot.3dsx` van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Stop je SD-kaart terug in je console 1. Zet je console aan {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt index 9ad44bb426c23..8b3a7da75d00e 100644 --- a/_pages/no_NO/installing-boot9strap-(ntrboot).txt +++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt index 6c6a869820bb3..b1d0c7a02f606 100644 --- a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt +++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + To karta SD twojego 3DS'a, *nie* karta SD z twojego flashcarta 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Usuń plik `boot.firm` z katalogu głównego twojej karty SD -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt index 57b0e31b8cfef..27f3b60c0360a 100644 --- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ Para usar os links do [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) nes + Esse é o cartão SD do seu 3DS, *não* o cartão SD do seu flashcart 1. Copie `SafeB9SInstaller.firm` do `.zip` do SafeB9SInstaller para a raiz do seu cartão SD e renomeie-o para `boot.firm` + A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela -1. Copie o `boot.3dsx` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD 1. Copie o `boot9strap.firm` e o `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD @@ -57,7 +56,7 @@ Para usar os links do [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) nes 1. Insira o cartão de SD do seu dispositivo no seu computador 1. Delete o `boot.firm` da raiz do seu cartão SD -1. Copie o `boot.firm` do Luma3DS.zip para a raiz do seu cartão SD +1. Copie `boot.firm` e `boot.3dsx` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Reinsira o cartão SD no seu console 1. Ligue o seu console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt index d71a63f8f2b5c..932e2fa6ffe49 100644 --- a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt index 7bee7a0a270ad..c09b13af385d9 100644 --- a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt +++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + Acesta este cardul SD de pe 3DS-ul dumneavoastră, *nu* cardul SD de pe flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Ștergeți `boot.firm` de pe rădăcina cardului SD -1. Copiați `boot.firm` de la Luma3DS `.zip` pe rădăcina cardului SD +1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt index 2dcd76e74c6be..5c15239c42862 100644 --- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt +++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + Это должна быть SD-карта вашей 3DS, *не* SD-карта вашего флешкартриджа 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Удалите файл `boot.firm` из корня SD-карты -1. Скопируйте файл `boot.firm` из `.zip-архива` Luma3DS в корень SD-карты +1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt +++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/th_TH/installing-boot9strap-(ntrboot).txt +++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt index a754507311082..4bd29de4f99af 100644 --- a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt +++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt +++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt index d41ba6a93f9ac..cf6ca7bbe02b4 100644 --- a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt +++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the root of your SD card and rename it to `boot.firm` + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card 1. Create a folder named `boot9strap` on the root of your console's SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Insert your console's SD card into your computer 1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt index b49cfef0913f8..51c92d02e3467 100644 --- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ title: "安装boot9strap (通过 ntrboot)" + 这里指的是 3DS 的 SD 卡，**不**是烧录卡中的 SD 卡 1. 将 SafeB9SInstaller `.zip` 中的 `SafeB9SInstaller.firm` 复制到 SD 卡的根目录下，然后重命名为 `boot.firm` + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去 -1. 解压 Luma3DS `.zip` 里的 `boot.3dsx` 到你主机 SD 卡的根目录 1. 在你主机 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 1. 从boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你主机 SD 卡的 `/boot9strap/` 文件夹中 @@ -57,7 +56,7 @@ title: "安装boot9strap (通过 ntrboot)" 1. 将你主机的 SD 卡插入你的电脑 1. 删除 SD 卡根目录下的 `boot.firm` 文件 -1. 解压 Luma3DS `.zip` 里的 `boot.firm` 到你 SD 卡的根目录 +1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %} diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt index 29fe22168b126..62e7bf2e48ce0 100644 --- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt @@ -25,7 +25,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + 這指的是 3DS 的 SD 卡，*非*燒錄卡中的 SD 卡 1. 解壓 SafeB9SInstaller `.zip` 中的 `SafeB9SInstaller.firm` 到 SD 卡的根目錄下，並將其重新命名為 `boot.firm` + 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部 -1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 與`boot.3dsx`到 SD 卡的根目錄底下 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 @@ -57,7 +56,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. 將您主機的 SD 卡插入至電腦中 1. 將 SD 卡根目錄中的 `boot.firm` 檔案刪除 -1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 到 SD 卡的根目錄底下 +1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 及 `boot.3dsx` 到 SD 卡的根目錄底下 1. Reinsert your SD card into your console 1. Power on your console {% include_relative include/configure-luma3ds.txt %}