With your DIY kit, you will receive:
Description | Images |
---|---|
PCB1 (PCB1-A64-MAIN) – main PCB with A64 processor, 2GB RAM, 16GB eMMC. It is in an ESD protective bag. Please handle with proper anti-static precautions | ![]() |
PCB2 (TERES-PCB2-IO) – IO PCB with microphone, connectors for: speaker, USB, SD-card, headphones | ![]() |
PCB3 (TERES-PCB3-TOUCH-BTN) – TOUCH two button PCB | ![]() |
PCB4 – PWR PCB (PCB4-PWR-BTN) with button for power on/off | ![]() |
PCB5 (TERES-PCB5-KEYBOARD) – KEYBOARD PCB with controller of the keyboard and touchpad | ![]() |
Bottom body plastic part, packed in bubble wrap to protect from scratches | ![]() ![]() |
Keyboard body plastic assembly | ![]() ![]() |
LCD plastic frame | ![]() ![]() |
LCD back plastic body | ![]() ![]() |
Plastic power button | ![]() ![]() |
Plastic touch buttons | ![]() ![]() |
Left speaker | ![]() ![]() |
Right speaker | ![]() ![]() |
Transparent LED pipe | ![]() ![]() |
Set of screws: M2x1.5 mm – 4 pcs; M2x3 mm – 9 pcs; M2x4 mm – 17 pcs; M2x5 mm – 12 pcs | ![]() ![]() |
eDP 11.6" HD (1366x768) LCD. It has protective foil on top. Datasheet | ![]() ![]() |
Left and right hinges | ![]() ![]() |
Mat set. There are four rubber pads for the bottom of the laptop, two circular pads for LCD frame screws cover and four self adhesive mats for holding the battery. | ![]() ![]() |
Magnet for the lid close sensor | ![]() ![]() |
Camera [Datasheet] | ![]() ![]() |
Camera lens | ![]() ![]() |
Two dust protectors – big and small | ![]() ![]() |
Touchpad cover | ![]() ![]() ![]() |
Touchpad | ![]() |
LiPo battery 9500 mAh [Datasheet] | ![]() |
WiFi/Bluetooth antenna | ![]() ![]() |
LCD/camera cable | ![]() ![]() |
Flat cable Main-IO | ![]() ![]() |
Flat cable Power-Main, Flat cable Main-Keyboard | ![]() ![]() |
Flat cable Touchpad-TouchButtons | ![]() ![]() |
Flat cable Keyboard-TouchButtons | ![]() ![]() |
Power adapter EU Style 5V 3A with 3 meter cable and LED status GREEN/RED indicator with UK and US plug adapters | ![]() ![]() ![]() |