Skip to content

Latest commit

 

History

History
25 lines (14 loc) · 745 Bytes

info.md

File metadata and controls

25 lines (14 loc) · 745 Bytes

Component to integrate with [multical_21][multical_21].

This component will set up the following platforms.

Platform Description
sensor Show info from the meter.

{% if not installed %}

Installation

  1. Click install.
  2. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Multical 21".

{% endif %}

Configuration is done in the UI

It's recommended to use devices as /dev/serial/by-id and not /dev/ttyUSB1 as the port, as the first one should be stable, while the second one can change when you add/remove usb (serial) adapters, or even when you perform a system reboot. The port will become something like: /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D307PBVY-if00-port0.