You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
My new Cisco C9200L-48P-4X with version 17.06.03 shows "Critical: 100% of outgoing traffic is broadcast" when polling the port-channel but not on the member-port:
The Port-Channel currently consists of only 1 port at the moment:
SWITCH1#show etherchannel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
A - formed by Auto LAG
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
1 Po1(SU) LACP Te1/1/1(P)
When I poll the member interface directly the output is fine:
Hi !
Thank you very much for you awesome script !
My new Cisco C9200L-48P-4X with version 17.06.03 shows "Critical: 100% of outgoing traffic is broadcast" when polling the port-channel but not on the member-port:
The Port-Channel currently consists of only 1 port at the moment:
When I poll the member interface directly the output is fine:
The text was updated successfully, but these errors were encountered: