windows version

[AmA-sud]

hi there,

recently have see a video on youtube ting software, I was wondering are you planning on compiling a windows version of it ?

[grayfallstown]

Unofficial: https://github.com/stotiks/chia-plotter/releases

[zxmtangfan]

Your computer doesn't support it. Is it the main board of x79

[deannamnguyen]

to be working for me. The only weird thing I noticed is that on a 40 cores machine, -r 16 options takes over the full 40 cores.

could you please share how to get the windows version to work? what is the command you use?

[deannamnguyen]

tried with both command, all end up killing process and gave this.
Final Directory: G:
Number of Plots: 20
Process ID: 5936
Number of Threads: 20
Number of Buckets: 2^7 (128)

[prodchia]

Your computer doesn't support it. Is it the main board of x79

I didn't do anything special. Just used the following command

c:> chia_plot.exe create -p xxxxxx -f xxxxxx -b 12288 -r 30 -u 128 -n 1 -t D:\ -2 E:\ -d Z:\

As someone suggested, there could be a compatability issue with your hardware

[delucca]

In the meantime, you could use a Docker container, as explained in #102

[zxmtangfan]

https://github.com/stotiks/chia-plotter/releases/tag/v0.0.3-alpha

…

------------------ 原始邮件 ------------------ 发件人: ***@***.***>; 发送时间: 2021年6月11日(星期五) 凌晨0:24 收件人: ***@***.***>; 抄送: ***@***.***>; ***@***.***>; 主题: Re: [madMAx43v3r/chia-plotter] windows version (#115) 为我工作。我注意到的唯一奇怪的事情是在 40 核机器上，-r 16 选项接管了全部 40 核。 你能分享一下如何让windows版本工作吗？你使用的命令是什么？ — 您收到此消息是因为您发表了评论。 直接回复此邮件，在 GitHub 上查看，或取消订阅。

[deannamnguyen]

I already try this release but no change

[giordanidev]

I already try this release but no change

is your MB chip x79?

i think its not working on those as it's not working here too. i have a x79 mb.

[zxmtangfan]

Your computer doesn't support it. Is it the main board of x79 Your computer doesn't support it. Is it the main board of x79 Your computer doesn't support it. Is it the main board of x79 Your computer doesn't support it. Is it the main board of x79

…

------------------ 原始邮件 ------------------ 发件人: ***@***.***>; 发送时间: 2021年6月11日(星期五) 凌晨0:26 收件人: ***@***.***>; 抄送: ***@***.***>; ***@***.***>; 主题: Re: [madMAx43v3r/chia-plotter] windows version (#115) 尝试使用这两个命令，最终都终止了进程并给出了这个。 最终目录：G： 图数：20 进程 ID：5936 线程 数：20桶数：2^7 (128) — 您收到此消息是因为您发表了评论。 直接回复此邮件，在 GitHub 上查看，或取消订阅。

[delucca]

In the meantime, you could use a Docker container, as explained in #102

[scerbera]

Whoever made the windows build, many thanks. here is a screen grab of my 3990x running 6 in parallel.

[brunobrdo]

6 in parallel using madmax plotter?
What's your setup (hardware)?

[scerbera]

3990x 64 core threadripper. using a nvme drive for temps and final. if you run max threads in phase 1 (on this machine), the cpu utilisation drops off when you get to phase 2-4 so you go from 100% to 60% ish. by limiting to 8 threads it will keep at 8 all the way through so can run a few in parallel.

Still experimenting but should easily better my previous plotting on this machine.

[brunobrdo]

Nice, I think we have similar hardwares.
I have Threadripper 3990x 64/128, 128GB RAM and (2+2+1) TB NVMe (Firecuda 520 series).
So... limiting 8 threads/plot you are running 6 in parallel.
Sounds very good.
But, how long to complete each plot?

[scerbera]

I'm going to give it 12 hours to get settled in to the correct timing and Ill let you know