Aed-Slimes

My design of PCB and case for NRF slime trackers

Ordering PCB

download the Aed_Slime_Gerber.zip file from the PCB folder on this repo

go to https://jlcpcb.com and follow the steps shown below

step 1

step 2

step 3

step 4

step 5

step 6

step 7

step 8

Parts List

SuperMini NRF52840 (https://www.aliexpress.com/item/1005007738886550.html?spm=a2g0o.order_list.order_list_main.11.53071802maORE3)
IMU of your choice (refer to https://docs.slimevr.dev/diy/imu-comparison.html)
my PCB
male 2.54mm header pins (https://www.aliexpress.com/item/1005005990753794.html?spm=a2g0o.order_list.order_list_main.84.53071802maORE3)
LIR2450 coin battery (www.amazon.co.uk/N20-Rechargeable-Battery-LIR2450-Lithium/dp/B093141K7D)
LIR2450 coin battery holder (https://www.aliexpress.com/item/32809235496.html?spm=a2g0o.order_list.order_list_main.17.53071802maORE3)
3d printed shit
ebyte dongle (https://www.aliexpress.com/item/1005004262523219.html?spm=a2g0o.order_list.order_list_main.5.53071802maORE3) (MAKE SURE TO SELECT THE E104-BT5040U OPTION)
push buttons (https://www.aliexpress.com/item/32882161197.html?spm=a2g0o.order_list.order_list_main.34.53071802maORE3) (you can get either color it doesnt matter)
straps (https://shop.slimevr.dev/products/official-slimevr-straps-v2) (buy according to the amount of trackers you have)
you also need basic soldering gear and cutters

Building Trackers

Flashing Tracker Firmware

Flashing Dongle Firmware