platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[platformio]
name = YaSolR
default_envs = pro-esp32, pro-esp32s3, pro-lilygo_eth_lite_s3, pro-wt32_eth01

[env]
build_type = release
; build_type = debug
framework = arduino
platform = https://github.com/pioarduino/platform-espressif32/releases/download/53.03.11/platform-espressif32.zip

monitor_filters = esp32_exception_decoder, log2file
monitor_speed = 115200

upload_protocol = esptool
; upload_protocol = espota
; upload_port = 192.168.4.1

extra_scripts =
    pre:tools/data.py
    pre:tools/cacerts.py
    pre:tools/version.py
    post:tools/factory.py

custom_cacert_url = https://curl.se/ca/cacert.pem
; custom_cacert_url = https://raw.githubusercontent.com/adafruit/certificates/main/data/roots.pem

board_build.partitions = tools/partitions-4MB-hex.csv
board_build.app_partition_name = app
board_upload.offset_address = 0xB0000
board_build.filesystem = littlefs

board_build.embed_files =
  .pio/data/cacerts.bin
  .pio/data/logo.png.gz
  .pio/data/logo-icon.png.gz
  .pio/data/config.html.gz

lib_compat_mode = strict
lib_ldf_mode = chain
lib_deps =
  DNSServer
  ESP32 Async UDP
  ESPmDNS
  FS
  Networking
  LittleFS
  WiFi
  Ticker
  Update
  bblanchon/ArduinoJson @ 7.3.0
  olikraus/U8g2 @ 2.36.2
  robtillaart/CRC @ 1.0.3
  ESP32Async/AsyncTCP @ 3.3.3
  ESP32Async/ESPAsyncWebServer @ 3.6.2
  mathieucarbou/MycilaConfig @ 7.0.3
  mathieucarbou/MycilaDS18 @ 4.1.4
  mathieucarbou/MycilaESPConnect @ 7.1.1
  mathieucarbou/MycilaEasyDisplay @ 3.1.0
  mathieucarbou/MycilaHADiscovery @ 6.0.1
  mathieucarbou/MycilaJSY @ 14.0.1
  mathieucarbou/MycilaLogger @ 3.2.1
  mathieucarbou/MycilaMQTT @ 6.0.5
  mathieucarbou/MycilaNTP @ 6.0.5
  mathieucarbou/MycilaPulseAnalyzer @ 3.0.0
  mathieucarbou/MycilaPZEM004Tv3 @ 6.0.0
  mathieucarbou/MycilaRelay @ 4.0.1
  mathieucarbou/MycilaSystem @ 4.0.1
  mathieucarbou/MycilaTaskManager @ 3.2.1
  mathieucarbou/MycilaTaskMonitor @ 4.0.0
  mathieucarbou/MycilaTrafficLight @ 2.0.2
  mathieucarbou/MycilaUtilities @ 3.2.0

build_flags =
  ; Stack sizes
  -D ARDUINO_LOOP_STACK_SIZE=4096
  ; Flag to disable secure clients
  ; https://github.com/espressif/arduino-esp32/pull/9893
  -D HTTPCLIENT_NOSECURE
  ; FS 
  -D FORMAT_LITTLEFS_IF_FAILED=1
  ; ISR
  ; -D CONFIG_ARDUINO_ISR_IRAM=1
  -D CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM=1
  -D CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM=1
  -D CONFIG_GPTIMER_ISR_IRAM_SAFE=1
  -D CONFIG_GPIO_CTRL_FUNC_IN_IRAM=1
  ; AsyncTCP
  -D CONFIG_ASYNC_TCP_MAX_ACK_TIME=5000
  -D CONFIG_ASYNC_TCP_PRIORITY=10
  -D CONFIG_ASYNC_TCP_QUEUE_SIZE=64
  -D CONFIG_ASYNC_TCP_RUNNING_CORE=1
  -D CONFIG_ASYNC_TCP_STACK_SIZE=4096
  -D CONFIG_ASYNC_TCP_TASK_NAME=\"async_tcp\"
  ; ESPAsyncWebServer
  -D WS_MAX_QUEUED_MESSAGES=64
  ; Mycila libraries
  -D MYCILA_DIMMER_MAX_COUNT=2
  -D MYCILA_JSON_SUPPORT
  -D MYCILA_JSY_READ_TIMEOUT_MS=500
  -D MYCILA_LOGGER_SUPPORT
  -D MYCILA_PULSE_ZC_SHIFT_US=-150
  ; MQTT
  -D CONFIG_MQTT_TASK_CORE_SELECTION=1
  -D MQTT_REPORT_DELETED_MESSAGES=1
  -D MYCILA_MQTT_BUFFER_SIZE=512
  ; -D MYCILA_MQTT_DEBUG=1
  -D MYCILA_MQTT_STACK_SIZE=4096
  -D MYCILA_MQTT_TASK_PRIORITY=1
  ; ESP-DASH
  -D DASH_DEFAULT_CARD_SIZE_LG=6
  -D DASH_DEFAULT_CARD_SIZE_MD=6
  -D DASH_DEFAULT_CARD_SIZE_SM=6
  -D DASH_DEFAULT_CARD_SIZE_XL=6
  -D DASH_DEFAULT_CARD_SIZE_XS=12
  -D DASH_DEFAULT_CARD_SIZE_XXL=3
  -D DASH_USE_STL_STRING=1
  -D DASH_JSON_SIZE=4096
  ; -D DASH_DEBUG=1
  ; U8g2
  -D U8G2_USE_DYNAMIC_ALLOC=1
  ; WebSerial
  -D WSL_HIGH_PERF
  ; YaSolR
  -D YASOLR_LANG=YASOLR_LANG_EN
  ; Logging
  -D CONFIG_ARDUHAL_LOG_COLORS
  -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_INFO
  ; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
  ; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_VERBOSE
  ; C++
  -Wall -Wextra
  -std=c++17
  -std=gnu++17
  -flto=auto
  ; https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
  ; -O0
  ; -O1
  ; -O2
  -O3
  ; -Og
  ; -Os
build_unflags =
  -std=gnu++11
  -fno-lto

; Hybrid compilation
;  Example: https://github.com/pioarduino/platform-espressif32/blob/main/examples/tasmota_platformio_override.ini

; custom_component_remove = 
;   chmorgan/esp-libhelix-mp3s
;   espressif/cbor
;   espressif/esp_diag_data_store
;   espressif/esp_diagnostics
;   espressif/esp_hosted
;   espressif/esp_insights
;   espressif/esp_modem
;   espressif/esp_rainmaker
;   espressif/esp_wifi_remote
;   espressif/esp-dsp
;   espressif/esp-modbus
;   espressif/esp-sr
;   espressif/esp-zboss-lib
;   espressif/esp-zigbee-lib
;   espressif/esp32-camera
;   espressif/libsodium
;   espressif/network_provisioning
;   espressif/qrcode
;   espressif/rmaker_common

; custom_sdkconfig = https://raw.githubusercontent.com/pioarduino/sdkconfig/refs/heads/main/sdkconfig_tasmota_esp32
;   '# CONFIG_ETH_USE_ESP32_EMAC is not set'
;   '# CONFIG_ETH_PHY_INTERFACE_RMII is not set'
;   '# CONFIG_ETH_RMII_CLK_INPUT is not set'
;   '# CONFIG_ETH_RMII_CLK_IN_GPIO is not set'

; custom_sdkconfig =
;   'CONFIG_AUTOSTART_ARDUINO=y'
;   'CONFIG_FREERTOS_HZ=1000'

; --------------------------------------------------------------------
; MODELS
; --------------------------------------------------------------------

[oss]
build_flags = -D APP_MODEL_OSS
lib_deps =
  mathieucarbou/MycilaWebSerial @ 8.1.1
  https://github.com/mathieucarbou/ayushsharma82-ESP-DASH#dev-v5
lib_ignore =
  ESPDASHPro
  WebSerialPro

[pro]
build_flags = -D APP_MODEL_PRO
lib_deps =
lib_ignore =

[trial]
build_flags =
  ${pro.build_flags} 
  -D APP_MODEL_TRIAL
  ; 3 days trial (259200 seconds)
  -D MYCILA_TRIAL_DURATION=259200
lib_deps =
  mathieucarbou/MycilaTrial @ 1.1.0
lib_ignore =

; --------------------------------------------------------------------
; ENVIRONMENTs
; --------------------------------------------------------------------

; esp32dev

[esp32]
build_flags =
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=16
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=17
  -D YASOLR_LIGHTS_GREEN_PIN=0
  -D YASOLR_LIGHTS_RED_PIN=15
  -D YASOLR_LIGHTS_YELLOW_PIN=2
  -D YASOLR_OUTPUT1_DIMMER_PIN=25
  -D YASOLR_OUTPUT1_RELAY_PIN=32
  -D YASOLR_OUTPUT1_TEMP_PIN=18
  -D YASOLR_OUTPUT2_DIMMER_PIN=26
  -D YASOLR_OUTPUT2_RELAY_PIN=33
  -D YASOLR_OUTPUT2_TEMP_PIN=5
  -D YASOLR_PZEM_RX_PIN=14
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=27
  -D YASOLR_RELAY1_PIN=13
  -D YASOLR_RELAY2_PIN=12
  -D YASOLR_SYSTEM_TEMP_PIN=4
  -D YASOLR_ZCD_PIN=35

[env:oss-esp32]
board = esp32dev
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32dev.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${esp32.build_flags}

[env:pro-esp32]
board = esp32dev
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32dev.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${esp32.build_flags}

[env:trial-esp32]
board = esp32dev
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32dev.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${esp32.build_flags}

; esp32s3

[esp32s3]
build_flags =
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=16
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=17
  -D YASOLR_LIGHTS_GREEN_PIN=0
  -D YASOLR_LIGHTS_RED_PIN=15
  -D YASOLR_LIGHTS_YELLOW_PIN=2
  -D YASOLR_OUTPUT1_DIMMER_PIN=37
  -D YASOLR_OUTPUT1_RELAY_PIN=40
  -D YASOLR_OUTPUT1_TEMP_PIN=18
  -D YASOLR_OUTPUT2_DIMMER_PIN=36
  -D YASOLR_OUTPUT2_RELAY_PIN=33
  -D YASOLR_OUTPUT2_TEMP_PIN=5
  -D YASOLR_PZEM_RX_PIN=14
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=11
  -D YASOLR_RELAY1_PIN=13
  -D YASOLR_RELAY2_PIN=12
  -D YASOLR_SYSTEM_TEMP_PIN=4
  -D YASOLR_ZCD_PIN=35

[env:oss-esp32s3]
board = esp32-s3-devkitc-1
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-s3-devkitc-1.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${esp32s3.build_flags}

[env:pro-esp32s3]
board = esp32-s3-devkitc-1
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-s3-devkitc-1.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${esp32s3.build_flags}

[env:trial-esp32s3]
board = esp32-s3-devkitc-1
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-s3-devkitc-1.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${esp32s3.build_flags}

; esp32-c6-devkitc-1

[esp32c6]
build_flags =
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=4
  -D YASOLR_JSY_SERIAL=Serial1
  -D YASOLR_JSY_TX_PIN=5
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=-1
  -D YASOLR_OUTPUT1_RELAY_PIN=-1
  -D YASOLR_OUTPUT1_TEMP_PIN=-1
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=-1
  -D YASOLR_PZEM_SERIAL=Serial0
  -D YASOLR_PZEM_TX_PIN=-1
  -D YASOLR_RELAY1_PIN=-1
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=-1
  -D YASOLR_ZCD_PIN=-1
  ; -D ARDUINO_USB_CDC_ON_BOOT=1
  ; -D YASOLR_PZEM_RX_PIN=-17
  ; -D YASOLR_PZEM_TX_PIN=-16

[env:oss-esp32c6]
board = esp32-c6-devkitc-1
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-c6-devkitc-1.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${esp32c6.build_flags}

[env:pro-esp32c6]
board = esp32-c6-devkitc-1
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-c6-devkitc-1.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${esp32c6.build_flags}

[env:trial-esp32c6]
board = esp32-c6-devkitc-1
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-c6-devkitc-1.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${esp32c6.build_flags}

; esp32_poe
; https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware
; pinout: https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/resources/ESP32-POE-GPIO.png

[esp32_poe]
build_flags =
  -D ESPCONNECT_ETH_RESET_ON_START
  -D ESPCONNECT_ETH_SUPPORT
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=35
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=33
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=-1
  -D YASOLR_OUTPUT1_RELAY_PIN=-1
  -D YASOLR_OUTPUT1_TEMP_PIN=-1
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=36
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=4
  -D YASOLR_RELAY1_PIN=-1
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=-1
  -D YASOLR_ZCD_PIN=-1

[env:oss-esp32_poe]
board = esp32-poe
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-poe.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${esp32_poe.build_flags}

[env:pro-esp32_poe]
board = esp32-poe
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-poe.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${esp32_poe.build_flags}

[env:trial-esp32_poe]
board = esp32-poe
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-poe.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${esp32_poe.build_flags}

; esp32_gateway
; pinout: https://www.olimex.com/Products/IoT/ESP32/ESP32-GATEWAY/resources/ESP32-GATEWAY-GPIOs-Rev.A-Rev.E.pdf
; pinout: https://www.olimex.com/Products/IoT/ESP32/ESP32-GATEWAY/resources/ESP32-GATEWAY-GPIOs-Rev.F-up.pdf

[esp32_gateway]
build_flags =
  -D ESPCONNECT_ETH_RESET_ON_START
  -D ESPCONNECT_ETH_SUPPORT
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=-1
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=-1
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=-1
  -D YASOLR_OUTPUT1_RELAY_PIN=-1
  -D YASOLR_OUTPUT1_TEMP_PIN=-1
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=-1
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=-1
  -D YASOLR_RELAY1_PIN=-1
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=-1
  -D YASOLR_ZCD_PIN=-1

[env:oss-esp32_gateway_rev_e]
board = esp32-gateway
board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY_E"
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-gateway.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${esp32_gateway.build_flags}

[env:pro-esp32_gateway_rev_e]
board = esp32-gateway
board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY_E"
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-gateway.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${esp32_gateway.build_flags}

[env:trial-esp32_gateway_rev_e]
board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY_E"
board = esp32-gateway
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-gateway.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${esp32_gateway.build_flags}

[env:oss-esp32_gateway_rev_f]
board = esp32-gateway
board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY_F"
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-gateway.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${esp32_gateway.build_flags}

[env:pro-esp32_gateway_rev_f]
board = esp32-gateway
board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY_F"
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-gateway.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${esp32_gateway.build_flags}

[env:trial-esp32_gateway_rev_f]
board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY_F"
board = esp32-gateway
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32-gateway.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${esp32_gateway.build_flags}

; wipy3
; https://docs.pycom.io/datasheets/development/wipy3/
; pinout: https://docs.pycom.io/gitbook/assets/wipy3-pinout.pdf

[wipy3]
build_flags =
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=4
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=25
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=-1
  -D YASOLR_OUTPUT1_RELAY_PIN=-1
  -D YASOLR_OUTPUT1_TEMP_PIN=-1
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=26
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=27
  -D YASOLR_RELAY1_PIN=-1
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=-1
  -D YASOLR_ZCD_PIN=-1

[env:oss-wipy3]
board = wipy3
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-wipy3.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${wipy3.build_flags}

[env:pro-wipy3]
board = wipy3
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-wipy3.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${wipy3.build_flags}

[env:trial-wipy3]
board = wipy3
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-wipy3.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${wipy3.build_flags}

; tinypico
; https://www.tinypico.com
; pinout: https://images.squarespace-cdn.com/content/v1/5c85d89877b903606126e6df/89b72883-5750-434e-b72f-daed37c209a8/tinypico-specs-v3-c.jpg

[tinypico]
build_flags =
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=4
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=25
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=-1
  -D YASOLR_OUTPUT1_RELAY_PIN=-1
  -D YASOLR_OUTPUT1_TEMP_PIN=-1
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=26
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=27
  -D YASOLR_RELAY1_PIN=-1
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=-1
  -D YASOLR_ZCD_PIN=-1

[env:oss-tinypico]
board = tinypico
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-tinypico.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${tinypico.build_flags}

[env:pro-tinypico]
board = tinypico
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-tinypico.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${tinypico.build_flags}

[env:trial-tinypico]
board = tinypico
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-tinypico.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${tinypico.build_flags}

; denky_d4
; https://github.com/hallard/Denky-D4

[denky_d4]
build_flags =
  -D YASOLR_DISPLAY_CLOCK_PIN=-1
  -D YASOLR_DISPLAY_DATA_PIN=-1
  -D YASOLR_JSY_RX_PIN=22
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=21
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=-1
  -D YASOLR_OUTPUT1_RELAY_PIN=-1
  -D YASOLR_OUTPUT1_TEMP_PIN=-1
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=25
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=33
  -D YASOLR_RELAY1_PIN=-1
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=-1
  -D YASOLR_ZCD_PIN=-1

[env:oss-denky_d4]
board = denky_d4
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-denky_d4.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${denky_d4.build_flags}

[env:pro-denky_d4]
board = denky_d4
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-denky_d4.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${denky_d4.build_flags}

[env:trial-denky_d4]
board = denky_d4
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-denky_d4.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${denky_d4.build_flags}

; wt32_eth01
; https://github.com/egnor/wt32-eth01

[wt32_eth01]
build_flags =
  -D ESPCONNECT_ETH_RESET_ON_START
  -D ESPCONNECT_ETH_SUPPORT
  -D ETH_PHY_ADDR=1
  -D ETH_PHY_POWER=16
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=16
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=5
  -D YASOLR_LIGHTS_GREEN_PIN=-1
  -D YASOLR_LIGHTS_RED_PIN=-1
  -D YASOLR_LIGHTS_YELLOW_PIN=-1
  -D YASOLR_OUTPUT1_DIMMER_PIN=2
  -D YASOLR_OUTPUT1_RELAY_PIN=12
  -D YASOLR_OUTPUT1_TEMP_PIN=15
  -D YASOLR_OUTPUT2_DIMMER_PIN=-1
  -D YASOLR_OUTPUT2_RELAY_PIN=-1
  -D YASOLR_OUTPUT2_TEMP_PIN=-1
  -D YASOLR_PZEM_RX_PIN=-1
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=-1
  -D YASOLR_RELAY1_PIN=14
  -D YASOLR_RELAY2_PIN=-1
  -D YASOLR_SYSTEM_TEMP_PIN=4
  -D YASOLR_ZCD_PIN=35

[env:oss-wt32_eth01]
board = wt32-eth01
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-wt32-eth01.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
upload_speed = 460800
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${wt32_eth01.build_flags}

[env:pro-wt32_eth01]
board = wt32-eth01
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-wt32-eth01.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
upload_speed = 460800
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${wt32_eth01.build_flags}

[env:trial-wt32_eth01]
board = wt32-eth01
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-wt32-eth01.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
upload_speed = 460800
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${wt32_eth01.build_flags}

; lilygo_eth_lite_s3
; https://github.com/Xinyuan-LilyGO/LilyGO-T-ETH-Series/

[lilygo_eth_lite_s3]
build_flags =
  -D ESPCONNECT_ETH_SUPPORT
  -D ETH_PHY_ADDR=1
  -D ETH_PHY_CS=9
  -D ETH_PHY_IRQ=13
  -D ETH_PHY_RST=14
  -D ETH_PHY_SPI_MISO=11
  -D ETH_PHY_SPI_MOSI=12
  -D ETH_PHY_SPI_SCK=10
  -D ETH_PHY_TYPE=ETH_PHY_W5500
  -D YASOLR_DISPLAY_CLOCK_PIN=SCL
  -D YASOLR_DISPLAY_DATA_PIN=SDA
  -D YASOLR_JSY_RX_PIN=17
  -D YASOLR_JSY_SERIAL=Serial2
  -D YASOLR_JSY_TX_PIN=18
  -D YASOLR_LIGHTS_GREEN_PIN=38
  -D YASOLR_LIGHTS_RED_PIN=46
  -D YASOLR_LIGHTS_YELLOW_PIN=21
  -D YASOLR_OUTPUT1_DIMMER_PIN=19
  -D YASOLR_OUTPUT1_RELAY_PIN=20
  -D YASOLR_OUTPUT1_TEMP_PIN=3
  -D YASOLR_OUTPUT2_DIMMER_PIN=7
  -D YASOLR_OUTPUT2_RELAY_PIN=15
  -D YASOLR_OUTPUT2_TEMP_PIN=16
  -D YASOLR_PZEM_RX_PIN=-1
  -D YASOLR_PZEM_SERIAL=Serial1
  -D YASOLR_PZEM_TX_PIN=-1
  -D YASOLR_RELAY1_PIN=5
  -D YASOLR_RELAY2_PIN=6
  -D YASOLR_SYSTEM_TEMP_PIN=4
  -D YASOLR_ZCD_PIN=8
  
[env:oss-lilygo_eth_lite_s3]
board = esp32s3box
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32s3box.bin
lib_deps =
  ${env.lib_deps}
  ${oss.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${oss.lib_ignore}
upload_speed = 115200
build_flags =
  ${env.build_flags}
  ${oss.build_flags}
  ${lilygo_eth_lite_s3.build_flags}

[env:pro-lilygo_eth_lite_s3]
board = esp32s3box
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32s3box.bin
lib_deps =
  ${env.lib_deps}
  ${pro.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${pro.lib_ignore}
upload_speed = 115200
build_flags =
  ${env.build_flags}
  ${pro.build_flags}
  ${lilygo_eth_lite_s3.build_flags}

[env:trial-lilygo_eth_lite_s3]
board = esp32s3box
custom_safeboot_url = https://github.com/mathieucarbou/MycilaSafeBoot/releases/download/v1.0.6/safeboot-esp32s3box.bin
lib_deps =
  ${env.lib_deps}
  ${trial.lib_deps}
lib_ignore =
  ${env.lib_ignore}
  ${trial.lib_ignore}
upload_speed = 115200
build_flags =
  ${env.build_flags}
  ${trial.build_flags}
  ${lilygo_eth_lite_s3.build_flags}