btt_skr_pico_10_map.h

/*
  btt_skr_pico_10_map.h - driver code for RP2040 ARM processors

  Part of grblHAL

  Copyright (c) 2022 Terje Io

  Grbl is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  Grbl is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with Grbl.  If not, see <http://www.gnu.org/licenses/>.
*/

#if N_ABC_MOTORS > 1
#error "Axis configuration is not supported!"
#endif

#define BOARD_NAME "BTT SKR Pico 1.0"
#define BOARD_URL "https://github.com/bigtreetech/SKR-Pico"

#undef TRINAMIC_ENABLE
#undef TRINAMIC_UART_ENABLE
#define TRINAMIC_ENABLE 2209
#define TRINAMIC_UART_ENABLE 1
#define HAS_BOARD_INIT

// Define step pulse output pins.
#define STEP_PORT                   GPIO_PIO_1 // Single pin PIO SM
#define X_STEP_PIN                  11
#define Y_STEP_PIN                  6
#define Z_STEP_PIN                  19

// Define step direction output pins.
#define DIRECTION_PORT              GPIO_OUTPUT
#define DIRECTION_OUTMODE           GPIO_MAP
#define X_DIRECTION_PIN             10
#define Y_DIRECTION_PIN             5
#define Z_DIRECTION_PIN             28

// Define stepper driver enable/disable output pin.
#define ENABLE_PORT                 GPIO_OUTPUT
#define X_ENABLE_PIN                12
#define Y_ENABLE_PIN                7
#define Z_ENABLE_PIN                2

// Define ganged axis or A axis step pulse and step direction output pins.
#if N_ABC_MOTORS > 0
#define M3_AVAILABLE
#define M3_STEP_PIN                 14
#define M3_DIRECTION_PIN            13
#define M3_ENABLE_PIN               15
#define M3_LIMIT_PIN                16
#endif

// Define homing/hard limit switch input pins.
#define LIMIT_PORT                  GPIO_IN
#define X_LIMIT_PIN                 4
#define Y_LIMIT_PIN                 3
#define Z_LIMIT_PIN                 25

// Define spindle enable and spindle direction output pins.
#define SPINDLE_PORT                GPIO_OUTPUT
#define SPINDLE_ENABLE_PIN          17
#define SPINDLE_DIRECTION_PIN       18

// Define spindle PWM output pin.
#define SPINDLE_PWM_PORT            GPIO_OUTPUT
#define SPINDLE_PWM_PIN             20

// Define flood and mist coolant enable output pins.
/*
#define COOLANT_PORT                GPIO_OUTPUT
#define COOLANT_FLOOD_PIN           2
#define COOLANT_MIST_PIN            3
*/

#if N_ABC_MOTORS == 0

// Define user-control controls (cycle start, reset, feed hold) input pins.
#define RESET_PIN                   16
#define FEED_HOLD_PIN               13
#define CYCLE_START_PIN             14
#if SAFETY_DOOR_ENABLE
#define SAFETY_DOOR_PIN             15
#endif

#endif

// Define probe switch input pin.
#define PROBE_PORT                  GPIO_INPUT
#define PROBE_PIN                   22