Double check that latest version works ok with the ESP8266

[TrystanLea]

See: https://community.openenergymonitor.org/t/vrms-drops-to-zero-no-more-data/13813/7

[sheppy99]

@TrystanLea In case its of any help I've recently switched to the continuous monitoring firmware and discovered that I get zero reported for one or 2 samples at random when it measures between 9200 and 10200 Watts on CT1, the other CT's aren't affected and this fault wasn't present on the descrete sampling firmware. Values outside of that range are OK. Looking at the MSG number it seems the EMONTX hasn't rebooted since the update about a month ago. I haven't finished investigating yet and I'll try reverting the EMONTX to prove the hardware isn't to blame before I file an issue if its appropriate.
My system uses an ESP running Tasmota with only the TX leg from the EMONTX connected, and an OpenHAB rule to unpack the EMONTX message string

[sheppy99]

Problem isn't there with the descrete sketch so I've opened an issue

[sheppy99]

Rewrote the sketch based upon examples supplied with the library, all problems are now resolved.

[borpin]

@sheppy99, would you mind sharing what you did?

[adrienlaveau]

Hello,
I am working on a project of Energy Monitor based on ESP32 and RaspberryPi (as broker/database). I was going to adapt the library to fit ESP32 needs and extra possibilies (wifi).
I did not find any project for that (only for Libmon, not LibmonCM). And I have just seen this message, does it mean that the base library (EmonlibCM) is compatible with ESP8266 ?

Thank you