Prime arc to reduce zil_replay & import times

The time it takes to import a zpool is dominated
by the time it take to replay the zfs intent log (zil)
when the zil is large. The zil is replayed serially,
and some operations require read-modify-write to occur,
for example TX_WRITE and TX_LINK entries. This commit
reduces zil_replay times by reading the zil and issuing
arc_read requests in parallel using a taskq prior to
performing the serial zil_replay. Doing so can reduce pool
import times from hours to minutes in cases where the zil
has many TX_WRITE and TX_LINK entries. The benefit is
particularly acute when the primary pool is stored on
high-latency devices, which increases the cost of pool
read-modify-write in serial zil_replay.

Signed-off-by: Mark Roper <[email protected]>

Author: markroper

cmd/ztest.c

@@ -1261,6 +1261,29 @@ ztest_record_enospc(const char *s)
 	ztest_shared->zs_enospc_count++;
 }
 
+static zfs_replay_prime_arc_func_t *ztest_replay_prime_vector[TX_MAX_TYPE] = {
+	NULL,			/* 0 no such transaction type */
+	NULL,			/* TX_CREATE */
+	NULL,			/* TX_MKDIR */
+	NULL,			/* TX_MKXATTR */
+	NULL,			/* TX_SYMLINK */
+	NULL,			/* TX_REMOVE */
+	NULL,			/* TX_RMDIR */
+	NULL,			/* TX_LINK */
+	NULL,			/* TX_RENAME */
+	NULL,			/* TX_WRITE */
+	NULL,			/* TX_TRUNCATE */
+	NULL,			/* TX_SETATTR */
+	NULL,			/* TX_ACL */
+	NULL,			/* TX_CREATE_ACL */
+	NULL,			/* TX_CREATE_ATTR */
+	NULL,			/* TX_CREATE_ACL_ATTR */
+	NULL,			/* TX_MKDIR_ACL */
+	NULL,			/* TX_MKDIR_ATTR */
+	NULL,			/* TX_MKDIR_ACL_ATTR */
+	NULL,			/* TX_WRITE2 */
+};
+
 static uint64_t
 ztest_get_ashift(void)
 {
@@ -3010,7 +3033,7 @@ ztest_zil_remount(ztest_ds_t *zd, uint64_t id)
 
 	/* zfsvfs_setup() */
 	VERIFY3P(zil_open(os, ztest_get_data, NULL), ==, zd->zd_zilog);
-	zil_replay(os, zd, ztest_replay_vector);
+	zil_replay(os, zd, ztest_replay_vector, ztest_replay_prime_vector);
 
 	(void) pthread_rwlock_unlock(&zd->zd_zilog_lock);
 	mutex_exit(&zd->zd_dirobj_lock);
@@ -4715,7 +4738,7 @@ ztest_dmu_objset_create_destroy(ztest_ds_t *zd, uint64_t id)
 	    ztest_dmu_objset_own(name, DMU_OST_OTHER, B_FALSE,
 	    B_TRUE, FTAG, &os) == 0) {
 		ztest_zd_init(zdtmp, NULL, os);
-		zil_replay(os, zdtmp, ztest_replay_vector);
+		zil_replay(os, zdtmp, ztest_replay_vector, ztest_replay_prime_vector);
 		ztest_zd_fini(zdtmp);
 		dmu_objset_disown(os, B_TRUE, FTAG);
 	}
@@ -7836,7 +7859,7 @@ ztest_dataset_open(int d)
 
 	ztest_dataset_dirobj_verify(zd);
 
-	zil_replay(os, zd, ztest_replay_vector);
+	zil_replay(os, zd, ztest_replay_vector, ztest_replay_prime_vector);
 
 	ztest_dataset_dirobj_verify(zd);
 
@@ -7883,7 +7906,7 @@ ztest_replay_zil_cb(const char *name, void *arg)
 	zdtmp = umem_alloc(sizeof (ztest_ds_t), UMEM_NOFAIL);
 
 	ztest_zd_init(zdtmp, NULL, os);
-	zil_replay(os, zdtmp, ztest_replay_vector);
+	zil_replay(os, zdtmp, ztest_replay_vector, ztest_replay_prime_vector);
 	ztest_zd_fini(zdtmp);
 
 	if (dmu_objset_zil(os)->zl_parse_lr_count != 0 &&

include/os/freebsd/zfs/sys/zfs_znode_impl.h

@@ -176,8 +176,6 @@ extern void	zfs_tstamp_update_setup_ext(struct znode *,
     uint_t, uint64_t [2], uint64_t [2], boolean_t have_tx);
 extern void zfs_znode_free(struct znode *);
 
-extern zil_replay_func_t *const zfs_replay_vector[TX_MAX_TYPE];
-
 extern int zfs_znode_parent_and_name(struct znode *zp, struct znode **dzpp,
     char *buf, uint64_t buflen);
 

include/os/linux/zfs/sys/zfs_znode_impl.h

@@ -159,7 +159,6 @@ extern int	zfs_inode_alloc(struct super_block *, struct inode **ip);
 extern void	zfs_inode_destroy(struct inode *);
 extern void	zfs_mark_inode_dirty(struct inode *);
 extern boolean_t zfs_relatime_need_update(const struct inode *);
-extern zil_replay_func_t *const zfs_replay_vector[TX_MAX_TYPE];
 
 #ifdef	__cplusplus
 }

include/sys/dsl_pool.h

@@ -64,6 +64,7 @@ extern uint_t zfs_dirty_data_max_percent;
 extern uint_t zfs_dirty_data_max_max_percent;
 extern uint_t zfs_delay_min_dirty_percent;
 extern uint64_t zfs_delay_scale;
+extern int zfs_zil_replay_prime_arc;
 
 /* These macros are for indexing into the zfs_all_blkstats_t. */
 #define	DMU_OT_DEFERRED	DMU_OT_NONE
@@ -137,6 +138,7 @@ typedef struct dsl_pool {
 	txg_list_t dp_early_sync_tasks;
 	taskq_t *dp_sync_taskq;
 	taskq_t *dp_zil_clean_taskq;
+	taskq_t *dp_zil_prime_taskq;
 
 	/*
 	 * Protects administrative changes (properties, namespace)

include/sys/zil.h

@@ -598,9 +598,21 @@ extern zilog_t	*zil_open(objset_t *os, zil_get_data_t *get_data,
     zil_sums_t *zil_sums);
 extern void	zil_close(zilog_t *zilog);
 
+extern zil_replay_func_t *const zfs_replay_vector[TX_MAX_TYPE];
+typedef void zfs_replay_prime_arc_func_t(void *args);
+extern zfs_replay_prime_arc_func_t *const zfs_replay_prime_vector[TX_MAX_TYPE];
+typedef struct zil_replay_arg {
+	zil_replay_func_t *const *zr_replay;
+	zfs_replay_prime_arc_func_t *const *zr_replay_prime;
+	void		*zr_arg;
+	boolean_t	zr_byteswap;
+	char		*zr_lr;
+} zil_replay_arg_t;
 extern boolean_t zil_replay(objset_t *os, void *arg,
-    zil_replay_func_t *const replay_func[TX_MAX_TYPE]);
+    zil_replay_func_t *const replay_func[TX_MAX_TYPE],
+    zfs_replay_prime_arc_func_t *const replay_prime_func[TX_MAX_TYPE]);
 extern boolean_t zil_replaying(zilog_t *zilog, dmu_tx_t *tx);
+
 extern boolean_t zil_destroy(zilog_t *zilog, boolean_t keep_first);
 extern void	zil_destroy_sync(zilog_t *zilog, dmu_tx_t *tx);
 

include/sys/zvol_impl.h

@@ -65,6 +65,7 @@ extern krwlock_t zvol_state_lock;
 extern struct hlist_head *zvol_htable;
 #define	ZVOL_HT_HEAD(hash)	(&zvol_htable[(hash) & (ZVOL_HT_SIZE-1)])
 extern zil_replay_func_t *const zvol_replay_vector[TX_MAX_TYPE];
+extern zfs_replay_prime_arc_func_t *const zvol_replay_prime_vector[TX_MAX_TYPE];
 
 extern unsigned int zvol_volmode;
 extern unsigned int zvol_inhibit_dev;

man/man4/zfs.4

@@ -2397,6 +2397,15 @@ The default value of
 .Sy 100%
 will create a maximum of one thread per cpu.
 .
+.It Sy zfs_zil_replay_prime_arc Ns = Ns Sy 0 Ns | Ns 1 Pq int
+Controls whether zil_replay will read the zil and in parallel issue
+zfs_read to prime the arc cache prior to performing real zil replay,
+which is serial. Priming before replay can reduce zpool_import latency
+by reducing zil_replay time for high latency pools. It does this by
+eliminating serial read-modify-write cycles in zil_replay.
+The value of 1 will perform arc_priming prior to zil_replay.
+The deafult value of 0 will not perform arc priming prior to zil_replay.
+.
 .It Sy zil_maxblocksize Ns = Ns Sy 131072 Ns B Po 128 KiB Pc Pq uint
 This sets the maximum block size used by the ZIL.
 On very fragmented pools, lowering this

module/os/freebsd/zfs/zfs_vfsops.c

@@ -1123,7 +1123,7 @@ zfsvfs_setup(zfsvfs_t *zfsvfs, boolean_t mounting)
 				zfsvfs->z_use_namecache = B_FALSE;
 				zfsvfs->z_replay = B_TRUE;
 				zil_replay(zfsvfs->z_os, zfsvfs,
-				    zfs_replay_vector);
+				    zfs_replay_vector, zfs_replay_prime_vector);
 				zfsvfs->z_replay = B_FALSE;
 				zfsvfs->z_use_namecache = use_nc;
 			}

module/os/freebsd/zfs/zvol_os.c

@@ -1488,7 +1488,8 @@ zvol_os_create_minor(const char *name)
 		if (zil_replay_disable)
 			replayed_zil = zil_destroy(zv->zv_zilog, B_FALSE);
 		else
-			replayed_zil = zil_replay(os, zv, zvol_replay_vector);
+			replayed_zil = zil_replay(os, zv, zvol_replay_vector,
+				zvol_replay_prime_vector);
 	}
 	if (replayed_zil)
 		zil_close(zv->zv_zilog);

module/os/linux/zfs/zfs_vfsops.c

@@ -928,7 +928,7 @@ zfsvfs_setup(zfsvfs_t *zfsvfs, boolean_t mounting)
 			} else {
 				zfsvfs->z_replay = B_TRUE;
 				zil_replay(zfsvfs->z_os, zfsvfs,
-				    zfs_replay_vector);
+				    zfs_replay_vector, zfs_replay_prime_vector);
 				zfsvfs->z_replay = B_FALSE;
 			}
 		}

module/os/linux/zfs/zvol_os.c

@@ -1700,7 +1700,8 @@ zvol_os_create_minor(const char *name)
 		if (zil_replay_disable)
 			replayed_zil = zil_destroy(zv->zv_zilog, B_FALSE);
 		else
-			replayed_zil = zil_replay(os, zv, zvol_replay_vector);
+			replayed_zil = zil_replay(os, zv, zvol_replay_vector,
+			    zvol_replay_prime_vector);
 	}
 	if (replayed_zil)
 		zil_close(zv->zv_zilog);

module/zfs/dsl_pool.c

@@ -169,6 +169,7 @@ uint64_t zfs_delay_scale = 1000 * 1000 * 1000 / 2000;
 static int zfs_zil_clean_taskq_nthr_pct = 100;
 static int zfs_zil_clean_taskq_minalloc = 1024;
 static int zfs_zil_clean_taskq_maxalloc = 1024 * 1024;
+int zfs_zil_replay_prime_arc = 0;
 
 int
 dsl_pool_open_special_dir(dsl_pool_t *dp, const char *name, dsl_dir_t **ddp)
@@ -217,6 +218,10 @@ dsl_pool_open_impl(spa_t *spa, uint64_t txg)
 	    zfs_zil_clean_taskq_maxalloc,
 	    TASKQ_PREPOPULATE | TASKQ_THREADS_CPU_PCT);
 
+	dp->dp_zil_prime_taskq = taskq_create("dp_zil_prime_taskq",
+	    100, minclsyspri, boot_ncpus, boot_ncpus * 2,
+	    TASKQ_THREADS_CPU_PCT);
+
 	mutex_init(&dp->dp_lock, NULL, MUTEX_DEFAULT, NULL);
 	cv_init(&dp->dp_spaceavail_cv, NULL, CV_DEFAULT, NULL);
 

module/zfs/zfs_replay.c

@@ -676,6 +676,39 @@ zfs_replay_link(void *arg1, void *arg2, boolean_t byteswap)
 	return (error);
 }
 
+static void
+zfs_replay_prime_link(void *args)
+{
+	zil_replay_arg_t *zr = args;
+	lr_link_t *lr;
+	zfsvfs_t *zfsvfs;
+	znode_t *dzp, *zp;
+	boolean_t byteswap;
+	int error;
+
+	zfsvfs = (zfsvfs_t *)zr->zr_arg;
+	lr = (lr_link_t *)zr->zr_lr;
+	byteswap = (boolean_t)zr->zr_byteswap;
+	if (byteswap)
+		byteswap_uint64_array(lr, sizeof (*lr));
+
+	if ((error = zfs_zget(zfsvfs, lr->lr_doid, &dzp)) != 0) {
+		cmn_err(CE_WARN, "Failed to get znode for link dir "
+		    "during replay prime: %d", error);
+		return;
+	}
+
+	if ((error = zfs_zget(zfsvfs, lr->lr_link_obj, &zp)) != 0) {
+		cmn_err(CE_WARN, "Failed to get znode for link "
+		    "during replay prime: %d", error);
+		zrele(dzp);
+		return;
+	}
+
+	zrele(zp);
+	zrele(dzp);
+}
+
 static int
 do_zfs_replay_rename(zfsvfs_t *zfsvfs, _lr_rename_t *lr, char *sname,
     char *tname, uint64_t rflags, vattr_t *wo_vap)
@@ -869,6 +902,52 @@ zfs_replay_write(void *arg1, void *arg2, boolean_t byteswap)
 	return (error);
 }
 
+static void
+zfs_replay_prime_write(void *args)
+{
+	fstrans_cookie_t cookie;
+	zil_replay_arg_t *zr = args;
+	zfsvfs_t *zfsvfs;
+	lr_write_t *lr;
+	znode_t	*zp;
+	uint64_t length;
+	uint64_t offset;
+	char *data;
+	struct iovec iov;
+	zfs_uio_t uio;
+	boolean_t byteswap;
+
+	zfsvfs = (zfsvfs_t *)zr->zr_arg;
+	lr = (lr_write_t *)zr->zr_lr;
+	byteswap = (boolean_t)zr->zr_byteswap;
+	if (byteswap)
+		byteswap_uint64_array(lr, sizeof (*lr));
+
+	length = lr->lr_length % zfsvfs->z_max_blksz;
+	if (length == 0)
+		goto read_task_done;
+
+	offset = lr->lr_offset + (lr->lr_length - length);
+	data = (char *)(lr + 1);
+	iov.iov_base = (void *)data;
+	iov.iov_len = length;
+	zfs_uio_iovec_init(&uio, &iov, 1, offset, UIO_SYSSPACE, length, 0);
+
+	if (zfs_zget(zfsvfs, lr->lr_foid, &zp) != 0)
+		goto read_task_done;
+
+	cookie = spl_fstrans_mark();
+	// Call zfs_read with the provided arguments
+	zfs_read(zp, &uio, /* ioflags */ 0, kcred);
+	spl_fstrans_unmark(cookie);
+
+	// Free the allocated memory
+	zrele(zp);
+read_task_done:
+	vmem_free(zr->zr_lr, sizeof (lr_write_t) + lr->lr_length);
+	kmem_free(zr, sizeof (zil_replay_arg_t));
+}
+
 /*
  * TX_WRITE2 are only generated when dmu_sync() returns EALREADY
  * meaning the pool block is already being synced. So now that we always write
@@ -1262,3 +1341,30 @@ zil_replay_func_t *const zfs_replay_vector[TX_MAX_TYPE] = {
 	zfs_replay_rename_whiteout,	/* TX_RENAME_WHITEOUT */
 	zfs_replay_clone_range,	/* TX_CLONE_RANGE */
 };
+
+/*
+ * Callback vectors for priming the arc for zil records
+ */
+zfs_replay_prime_arc_func_t *const zfs_replay_prime_vector[TX_MAX_TYPE] = {
+	NULL,			/* no such type */
+	NULL,			/* TX_CREATE */
+	NULL,			/* TX_MKDIR */
+	NULL,			/* TX_MKXATTR */
+	NULL,			/* TX_SYMLINK */
+	NULL,			/* TX_REMOVE */
+	NULL,			/* TX_RMDIR */
+	zfs_replay_prime_link,	/* TX_LINK */
+	NULL,			/* TX_RENAME */
+	zfs_replay_prime_write,	/* TX_WRITE */
+	NULL,			/* TX_TRUNCATE */
+	NULL,			/* TX_SETATTR */
+	NULL,			/* TX_ACL_V0 */
+	NULL,			/* TX_ACL */
+	NULL,			/* TX_CREATE_ACL */
+	NULL,			/* TX_CREATE_ATTR */
+	NULL,			/* TX_CREATE_ACL_ATTR */
+	NULL,			/* TX_MKDIR_ACL */
+	NULL,			/* TX_MKDIR_ATTR */
+	NULL,			/* TX_MKDIR_ACL_ATTR */
+	NULL,			/* TX_WRITE2 */
+};