Lot of connection issues after upgrading to 1.4.1

[Fredzxda]

Hello,

I use proxy BLE to control my blind2go. After upgrading to 1.4.1 It is very difficult to connect to the blind.
It is the case for command send from Home Assistant and the same from the tuiss app on my smartphone.
Going back to 1.4.0 solve the problem.
I assume there is a lot of attempt which use all the bandwith of BLE or something like that.

Hope this can help.

[pink88]

Thanks for flagging, can you confirm back if it's still an issue on 1.4.0 after a couple of days please.

…

On Mon, 27 Jan 2025, 19:17 Fredzxda, ***@***.***> wrote: Hello, I use proxy BLE to control my blind2go. After upgrading to 1.4.1 It is very difficult to connect to the blind. It is the case for command send from Home Assistant and the same from the tuiss app on my smartphone. Going back to 1.4.0 solve the problem. I assume there is a lot of attempt which use all the bandwith of BLE or something like that. Hope this can help. — Reply to this email directly, view it on GitHub <#31>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADSFUT3IYHVHHMZ2WD7WO4L2M2A6BAVCNFSM6AAAAABV6Z5L5SVHI2DSMVQWIX3LMV43ASLTON2WKOZSHAYTGOBVHAYDANQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[Fredzxda]

The problem is still there with 1.4.0 version. Howerver, it seems to append less frequently.
For better understanding:

• I use 4 NSPanel with Blackymas blueprint NSPanel_HA_Blueprint
• I enable ble proxy module integrated as an option.
• It work very well with my OralB toothbrush for a while.
• Looking at NSPanel_HA_Blueprint issue tracker it seems they are using IDF version instead of arduino version for ROM and RAM constraints.

For the following days, i will try the different configuration to identify if it solve the problem:

1. Disable proxy module and keep it only for one NSPanel
2. Disable all proxy module and use a ESP32 with official proxy module.

I let you know the result by this weekend.

[Fredzxda]

Here some updates:
The try which consist in disabling NSPanel proxies and keep only one was not succesfull. After 1 day, the connection problem reappeared.
I flash an ESP32 card with latest proxy module and it work for more than 2 days. I am still in 1.4.0 and will move to 1.4.1 in a couple of day if the connection is still stable.
During this time, I will have a look at NSPanel proxy module code to try to identify the problem.