diff --git a/phpMyAdmin/.coveralls.yml b/phpMyAdmin/.coveralls.yml new file mode 100644 index 0000000..3ec7d2c --- /dev/null +++ b/phpMyAdmin/.coveralls.yml @@ -0,0 +1,3 @@ +src_dir: ./libraries/ +coverage_clover: build/logs/clover.xml +json_path: build/logs/coveralls-upload.json diff --git a/phpMyAdmin/.travis.yml b/phpMyAdmin/.travis.yml deleted file mode 100644 index b0824bd..0000000 --- a/phpMyAdmin/.travis.yml +++ /dev/null @@ -1,6 +0,0 @@ -language: php -php: - - "5.4" - - "5.3" -before_script: ./scripts/generate-mo --quiet -script: phpunit --configuration phpunit.xml.nocoverage diff --git a/phpMyAdmin/Documentation.html b/phpMyAdmin/Documentation.html deleted file mode 100644 index 594b039..0000000 --- a/phpMyAdmin/Documentation.html +++ /dev/null @@ -1,5247 +0,0 @@ - - - - - - - - phpMyAdmin 3.5.7 - Documentation - - - - - - - - - -
- - - - -

Requirements

- - - - -

Introduction

- -

phpMyAdmin can manage a whole MySQL server (needs a super-user) as well as - a single database. To accomplish the latter you'll need a properly set up - MySQL user who can read/write only the desired database. It's up to you to - look up the appropriate part in the MySQL manual. -

- -

Currently phpMyAdmin can:

- - - -

A word about users:

-

Many people have difficulty - understanding the concept of user management with regards to phpMyAdmin. When - a user logs in to phpMyAdmin, that username and password are passed directly - to MySQL. phpMyAdmin does no account management on its own (other than - allowing one to manipulate the MySQL user account information); all users - must be valid MySQL users.

- -

- 1) phpMyAdmin can compress (Zip, GZip -RFC 1952- or Bzip2 formats) - dumps and CSV exports if you use - PHP with Zlib support (--with-zlib) and/or Bzip2 support - (--with-bz2). Proper support may also need changes in - php.ini.

- - -

Installation

- -
  1. Quick Install
    2. -
  2. Setup script usage
    3. -
  3. phpMyAdmin configuration storage
    4. -
  4. Upgrading from an older version
    5. -
  5. Using authentication modes
    6. -
- -

- phpMyAdmin does not apply any special security methods to the MySQL database - server. It is still the system administrator's job to grant permissions on - the MySQL databases properly. phpMyAdmin's "Privileges" page can - be used for this. -

- -

- Warning for Mac users:
- if you are on a Mac - OS version before - OS X, StuffIt unstuffs with - Mac formats.
- So you'll have to resave as in BBEdit to Unix style ALL phpMyAdmin scripts - before uploading them to your server, as PHP seems not to like - Mac-style end of lines character - ("\r").

- -

Quick Install

-
  1. Choose an appropriate distribution kit from the phpmyadmin.net - Downloads page. Some kits contain only the English messages, - others contain all languages in UTF-8 format (this should be fine - in most situations), others contain all - languages and all character sets. We'll assume you chose a kit whose - name looks like phpMyAdmin-x.x.x-all-languages.tar.gz. -
    2. -
  2. Untar or unzip the distribution (be sure to unzip the subdirectories): - tar -xzvf phpMyAdmin_x.x.x-all-languages.tar.gz in your webserver's - document root. If you don't have direct access to your document root, - put the files in a directory on your local machine, and, after step 4, - transfer the directory on your web server using, for example, ftp.
    3. -
  3. Ensure that all the scripts have the appropriate owner (if PHP is - running in safe mode, having some scripts with an owner different - from the owner of other scripts will be a - problem). See - FAQ 4.2 and - FAQ - 1.26 for suggestions.
    4. -
  4. Now you must configure your installation. There are two methods that - can be used. Traditionally, users have hand-edited a copy of - config.inc.php, but now a wizard-style setup script is - provided for those who prefer a graphical installation. Creating a - config.inc.php is still a quick way to get started and needed for some advanced features. -
    • To manually create the file, simply use your text editor to - create the file config.inc.php (you can copy - config.sample.inc.php to get minimal configuration - file) in the main (top-level) phpMyAdmin directory (the one - that contains index.php). phpMyAdmin first loads - libraries/config.default.php and then overrides those - values with anything found in config.inc.php. If the - default value is okay for a particular setting, there is no - need to include it in config.inc.php. You'll need a - few directives to get going, a simple configuration may look - like this: -
      -<?php
-$cfg['blowfish_secret'] = 'ba17c1ec07d65003';  // use here a value of your choice
-
-$i=0;
-$i++;
-$cfg['Servers'][$i]['auth_type']     = 'cookie';
-?>
-
      - Or, if you prefer to not be prompted every time you log in: -
      -<?php
-
-$i=0;
-$i++;
-$cfg['Servers'][$i]['user']          = 'root';
-$cfg['Servers'][$i]['password']      = 'cbb74bc'; // use here your password
-$cfg['Servers'][$i]['auth_type']     = 'config';
-?>
-
      - For a full explanation of possible configuration values, see the - Configuration Section of this document.
      • -
    • Instead of manually editing - config.inc.php, you can use the - Setup Script. First you must - manually create a folder config in the phpMyAdmin - directory. This is a security measure. On a Linux/Unix system you - can use the following commands: -
      -cd phpMyAdmin
-mkdir config                        # create directory for saving
-chmod o+rw config                   # give it world writable permissions
-
      - And to edit an existing configuration, copy it over first: -
      -cp config.inc.php config/           # copy current configuration for editing
-chmod o+w config/config.inc.php     # give it world writable permissions
-
      - On other platforms, simply create the folder and ensure that your - web server has read and write access to it. FAQ - 1.26 can help with this.

      - - Next, open setup/ - in your browser. Note that changes are not saved to - disk until explicitly choose Save from the - Configuration area of the screen. Normally the script saves - the new config.inc.php to the config/ directory, but if - the webserver does not have the proper permissions you may see the - error "Cannot load or save configuration." Ensure that the - config/ directory exists and has the proper permissions - - or use the Download link to save the config file locally - and upload (via FTP or some similar means) to the proper location.

      - - Once the file has been saved, it must be moved out of the - config/ directory and the permissions must be reset, again - as a security measure: -
      -mv config/config.inc.php .         # move file to current directory
-chmod o-rw config.inc.php          # remove world read and write permissions
-rm -rf config                      # remove not needed directory
-
      - Now the file is ready to be used. You can choose to review or edit - the file with your favorite editor, if you prefer to set some - advanced options which the setup script does not provide.
    5. -
  5. If you are using the - auth_type "config", it is suggested that you - protect the phpMyAdmin installation directory because using - config does not require a user to - enter a password to access the phpMyAdmin installation. Use of an alternate - authentication method is recommended, for example with - HTTP–AUTH in a .htaccess file or switch to using - auth_type cookie or http. See the - multi–user sub–section of this - FAQ for additional - information, especially - FAQ 4.4.
    6. -
  6. Open the main phpMyAdmin directory - in your browser. phpMyAdmin should now display a welcome screen - and your databases, or a login dialog if using - HTTP or cookie - authentication mode.
    7. -
  7. You should deny access to the ./libraries and - ./setup/lib subfolders in your webserver configuration. For - Apache you can use supplied .htaccess file in that folder, for other - webservers, you should configure this yourself. Such configuration - prevents from possible path exposure and cross side scripting - vulnerabilities that might happen to be found in that code.
    8. -
  8. - It is generally good idea to protect public phpMyAdmin installation - against access by robots as they usually can not do anything good - there. You can do this using robots.txt file in root of - your webserver or limit access by web server configuration, see - FAQ 1.42. -
    9. -
- -

phpMyAdmin configuration storage

- -

For a whole set of new features (bookmarks, comments, - SQL-history, - tracking mechanism, - PDF-generation, column contents - transformation, etc.) you need to create a set of special tables. Those - tables can be located in your own database, or in a central database for a - multi-user installation (this database would then be accessed by the - controluser, so no other user should have rights to it).

- -

Please look at your ./examples/ directory, where you should find a - file called create_tables.sql. (If you are using a Windows server, pay - special attention to - FAQ 1.23).

- -

If you already had this infrastructure and upgraded to MySQL 4.1.2 - or newer, please use ./examples/upgrade_tables_mysql_4_1_2+.sql - and then create new tables by importing ./examples/create_tables.sql.

- -

You can use your phpMyAdmin to create the tables for you. Please be aware - that you may need special (administrator) privileges to create the database - and tables, and that the script may need some tuning, depending on the - database name.

- -

After having imported the ./examples/create_tables.sql file, you - should specify the table names in your ./config.inc.php file. The - directives used for that can be found in the Configuration - section. You will also need to have a controluser with the proper rights - to those tables (see section Using - authentication modes below).

- -

Upgrading from an older version

- -

Simply copy ./config.inc.php from your previous installation into the newly - unpacked one. Configuration files from old versions may - require some tweaking as some options have been changed or removed; in - particular, the definition of $cfg['AttributeTypes'] has changed - so you better remove it from your file and just use the default one. - For compatibility with PHP 6, remove a set_magic_quotes_runtime(0); - statement that you might find near the end of your configuration file.

- -

You should not copy libraries/config.default.php - over config.inc.php because the default configuration file - is version-specific.

- -

If you have upgraded your MySQL server from a version previous to 4.1.2 to - version 5.x or newer and if you use the phpMyAdmin configuration storage, - you should run the SQL script - found in examples/upgrade_tables_mysql_4_1_2+.sql.

- -

Using authentication modes

- - - -

'HTTP' authentication mode

- - - -

'cookie' authentication mode

- - - -

'signon' authentication mode

- - -

'config' authentication mode

- - -

Swekey authentication

-

-The Swekey is a low cost authentication USB key that can be used in -web applications.

-When Swekey authentication is activated, phpMyAdmin requires the -users's Swekey to be plugged before entering the login page (currently -supported for cookie authentication mode only). Swekey Authentication is -disabled by default.

-To enable it, add the following line to config.inc.php: -

-
-$cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey.conf';
-
-

-You then have to create the swekey.conf file that will associate -each user with their Swekey Id. It is important to place this file outside -of your web server's document root (in the example, it is located in /etc). A self documented sample file is provided -in the examples directory. Feel free to use it with your own -users' information.

-If you want to purchase a Swekey please visit -http://phpmyadmin.net/auth_key -since this link provides funding for phpMyAdmin. -

- -

Configuration

- -

Warning for Mac - users: PHP does not seem to like - Mac end of lines character - ("\r"). So ensure you choose the option that allows to use - the *nix end of line character ("\n") in your text editor - before saving a script you have modified.

- -

Configuration note: - Almost all configurable data is placed in config.inc.php. If this file - does not exist, please refer to the Quick install - section to create one. This file only needs to contain the parameters you want to - change from their corresponding default value in - libraries/config.default.php.

- -

The parameters which relate to design (like colors) are placed in - themes/themename/layout.inc.php. You might also want to create - config.footer.inc.php and config.header.inc.php files to add - your site specific code to be included on start and end of each page.

- -
$cfg['PmaAbsoluteUri'] string
-
Sets here the complete URL - (with full path) to your phpMyAdmin installation's directory. - E.g. http://www.your_web.net/path_to_your_phpMyAdmin_directory/. - Note also that the URL on - some web servers are case–sensitive. - Don’t forget the trailing slash at the end.

- - Starting with version 2.3.0, it is advisable to try leaving this - blank. In most cases phpMyAdmin automatically detects the proper - setting. Users of port forwarding will need to set PmaAbsoluteUri (more info). - A good test is to browse a table, edit a row and save it. There should - be an error message if phpMyAdmin is having trouble auto–detecting - the correct value. If you get an error that this must be set or if - the autodetect code fails to detect your path, please post a bug - report on our bug tracker so we can improve the code.
- -
$cfg['PmaNoRelation_DisableWarning'] boolean
-
Starting with version 2.3.0 phpMyAdmin offers a lot of features to work - with master / foreign – tables (see - $cfg['Servers'][$i]['pmadb']). -
- If you tried to set this up and it does not work for you, have a look on - the "Structure" page of one database where you would like to - use it. You will find a link that will analyze why those features have - been disabled.
- If you do not want to use those features set this variable to - TRUE to stop this message from appearing.
- -
$cfg['SuhosinDisableWarning'] boolean
-
A warning is displayed on the main page if Suhosin is detected. - You can set this parameter to TRUE to stop this message - from appearing.
- -
$cfg['McryptDisableWarning'] boolean
-
Disable the default warning that is displayed if mcrypt is missing for - cookie authentication. - You can set this parameter to TRUE to stop this message - from appearing.
- -
$cfg['TranslationWarningThreshold'] integer
-
Show warning about incomplete translations on certain threshold.
- -
$cfg['AllowThirdPartyFraming'] boolean
-
Setting this to true allows a page located on a different - domain to call phpMyAdmin inside a frame, and is a potential security - hole allowing cross-frame scripting attacks.
- -
$cfg['blowfish_secret'] string
-
The "cookie" auth_type uses blowfish - algorithm to encrypt the password.
- If you are using the "cookie" auth_type, enter here a random - passphrase of your choice. It will be used internally by the blowfish - algorithm: you won’t be prompted for this passphrase. There is - no maximum length for this secret.

- - Since version 3.1.0 phpMyAdmin can generate this on the fly, but it - makes a bit weaker security as this generated secret is stored in - session and furthermore it makes impossible to recall user name from - cookie.
- -
$cfg['Servers'] array
-
Since version 1.4.2, phpMyAdmin supports the administration of multiple - MySQL servers. Therefore, a - $cfg['Servers']-array has - been added which contains the login information for the different servers. - The first - $cfg['Servers'][$i]['host'] - contains the hostname of the first server, the second - $cfg['Servers'][$i]['host'] - the hostname of the second server, etc. In - ./libraries/config.default.php, there is only one section for - server definition, however you can put as many as you need in - ./config.inc.php, copy that block or needed parts (you don't - have to define all settings, just those you need to change).
- -
$cfg['Servers'][$i]['host'] string
-
The hostname or IP address of your - $i-th MySQL-server. E.g. localhost.
- -
$cfg['Servers'][$i]['port'] string
-
The port-number of your $i-th MySQL-server. Default is 3306 (leave - blank). If you use "localhost" as the hostname, MySQL - ignores this port number and connects with the socket, so if you want - to connect to a port different from the default port, use - "127.0.0.1" or the real hostname in - $cfg['Servers'][$i]['host']. -
- -
$cfg['Servers'][$i]['socket'] string
-
The path to the socket to use. Leave blank for default.
- To determine the correct socket, check your MySQL configuration or, using the - mysql command–line client, issue the status command. - Among the resulting information displayed will be the socket used.
- -
$cfg['Servers'][$i]['ssl'] boolean
-
Whether to enable SSL for connection to MySQL server. -
- -
$cfg['Servers'][$i]['connect_type'] string
-
What type connection to use with the MySQL server. Your options are - 'socket' and 'tcp'. It defaults to 'tcp' as that - is nearly guaranteed to be available on all MySQL servers, while - sockets are not supported on some platforms.

- - To use the socket mode, your MySQL server must be on the same machine - as the Web server.
- -
$cfg['Servers'][$i]['extension'] string
-
What php MySQL extension to use for the connection. Valid options are: -

- - mysql : - The classic MySQL extension.

- - mysqli : - The improved MySQL extension. This extension became available - with PHP 5.0.0 and is the recommended way to connect to a server - running MySQL 4.1.x or newer.
- -
$cfg['Servers'][$i]['compress'] boolean
-
Whether to use a compressed protocol for the MySQL server connection - or not (experimental).
- -
- $cfg['Servers'][$i]['controlhost'] string
-
-
Permits to use an alternate host to hold the configuration storage - data.
- -
- $cfg['Servers'][$i]['controluser'] string
- $cfg['Servers'][$i]['controlpass'] string -
-
This special account is used for 2 distinct purposes: to make possible - all relational features (see - $cfg['Servers'][$i]['pmadb']) - and, for a MySQL server running with - --skip-show-database, to enable a multi-user installation - (HTTP or cookie - authentication mode).

- - When using HTTP or - cookie authentication modes (or 'config' - authentication mode since phpMyAdmin 2.2.1), you need to supply the - details of a MySQL account that has SELECT privilege on the - mysql.user (all columns except "Password"), - mysql.db (all columns) and mysql.tables_priv (all columns - except "Grantor" and "Timestamp") tables. - This account is used to check what databases the user will see at - login.
- Please see the install section on - "Using authentication modes" for more information.

- - In phpMyAdmin versions before 2.2.5, those were called - "stduser/stdpass".
- -
$cfg['Servers'][$i]['auth_type'] string - ['HTTP'|'http'|'cookie'|'config'|'signon']
-
Whether config or cookie or - HTTP or signon authentication - should be used for this server. -
  • 'config' authentication ($auth_type = 'config') - is the plain old way: username and password are stored in - config.inc.php.
    • -
  • 'cookie' authentication mode - ($auth_type = 'cookie') as introduced in - 2.2.3 allows you to log in as any valid MySQL user with the - help of cookies. Username and password are stored in - cookies during the session and password is deleted when it - ends. This can also allow you to log in in arbitrary server if - $cfg['AllowArbitraryServer'] enabled. -
    • -
  • 'HTTP' authentication (was called 'advanced' in previous versions and can be written also as 'http') - ($auth_type = 'HTTP') as introduced in 1.3.0 - allows you to log in as any valid MySQL user via HTTP-Auth.
    • -
  • 'signon' authentication mode - ($auth_type = 'signon') - as introduced in 2.10.0 allows you to log in from prepared PHP - session data or using supplied PHP script. This is useful for implementing single signon - from another application. - - Sample way how to seed session is in signon example: examples/signon.php. - There is also alternative example using OpenID - examples/openid.php and - example for scripts based solution - examples/signon-script.php. - - You need to - configure session name or script to be executed and signon - URL to use - this authentication method.
    • -
- - Please see the install section on "Using authentication modes" - for more information. -
-
- $cfg['Servers'][$i]['auth_http_realm'] string
-
-
- When using auth_type = 'HTTP', this field allows to define a custom - HTTP Basic Auth Realm which will be displayed to the user. If not explicitly - specified in your configuration, a string combined of "phpMyAdmin " and either - $cfg['Servers'][$i]['verbose'] - or $cfg['Servers'][$i]['host'] will be used. -
-
- $cfg['Servers'][$i]['auth_swekey_config'] string
-
-
- The name of the file containing Swekey ids and login - names for hardware authentication. Leave empty to deactivate this feature. -
-
- $cfg['Servers'][$i]['user'] string
- $cfg['Servers'][$i]['password'] string -
-
- When using auth_type = 'config', this is the user/password-pair - which phpMyAdmin will use to connect to the - MySQL server. This user/password pair is not needed when HTTP or - cookie authentication is used and should be empty.
-
- $cfg['Servers'][$i]['nopassword'] boolean -
-
- Allow attempt to log in without password when a login with password - fails. This can be used together with http authentication, when - authentication is done some other way and phpMyAdmin gets user name - from auth and uses empty password for connecting to MySQL. Password - login is still tried first, but as fallback, no password method is - tried.
-
- $cfg['Servers'][$i]['only_db'] string or array -
-
- If set to a (an array of) database name(s), only this (these) database(s) - will be shown to the user. Since phpMyAdmin 2.2.1, this/these - database(s) name(s) may contain MySQL wildcards characters - ("_" and "%"): if you want to use literal instances - of these characters, escape them (I.E. use 'my\_db' and not - 'my_db').
- This setting is an efficient way to lower the server load since the - latter does not need to send MySQL requests to build the available - database list. But it does not replace the - privileges rules of the MySQL database server. If set, it just - means only these databases will be displayed but - not that all other databases can't be used. -

- - An example of using more that one database: - $cfg['Servers'][$i]['only_db'] = array('db1', 'db2'); -

- - As of phpMyAdmin 2.5.5 the order inside the array is used for sorting the - databases in the left frame, so that you can individually arrange your databases.
- If you want to have certain databases at the top, but don't care about the others, you do not - need to specify all other databases. Use: - $cfg['Servers'][$i]['only_db'] = array('db3', 'db4', '*'); - instead to tell phpMyAdmin that it should display db3 and db4 on top, and the rest in alphabetic - order.
- -
$cfg['Servers'][$i]['hide_db'] string -
-
Regular expression for hiding some databases from unprivileged users. - This only hides them - from listing, but a user is still able to access them (using, for example, - the SQL query area). To limit access, use the MySQL privilege system. -

- For example, to hide all databases starting with the letter "a", use
- 
$cfg['Servers'][$i]['hide_db'] = '^a';
- and to hide both "db1" and "db2" use
- 
$cfg['Servers'][$i]['hide_db'] = '^(db1|db2)$';
- More information on regular expressions can be found in the - - PCRE pattern syntax portion of the PHP reference manual. -
- -
$cfg['Servers'][$i]['verbose'] string
-
Only useful when using phpMyAdmin with multiple server entries. If set, - this string will be displayed instead of the hostname in the pull-down - menu on the main page. This can be useful if you want to show only - certain databases on your system, for example. For HTTP auth, all - non-US-ASCII characters will be stripped.
- -
- $cfg['Servers'][$i]['pmadb'] string -
-
The name of the database containing the phpMyAdmin configuration storage. -

- - See the phpMyAdmin configuration storage - section in this document to see the benefits of this feature, - and for a quick way of creating this database and the needed tables. -

- - If you are the only user of this phpMyAdmin installation, you can - use your current database to store those special tables; in this - case, just put your current database name in - $cfg['Servers'][$i]['pmadb']. For a multi-user installation, - set this parameter to the name of your central database containing - the phpMyAdmin configuration storage.
- -
- $cfg['Servers'][$i]['bookmarktable'] string -
-
Since release 2.2.0 phpMyAdmin allows users to bookmark queries. This can be - useful for queries you often run.

- - To allow the usage of this functionality: -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • enter the table name in - $cfg['Servers'][$i]['bookmarktable']
    • -
-
- -
- $cfg['Servers'][$i]['relation'] string -
-
Since release 2.2.4 you can describe, in a special 'relation' table, - which column is a key in another table (a foreign key). phpMyAdmin - currently uses this to -
  • make clickable, when you browse the master table, the data values - that point to the foreign table;
    • -
  • display in an optional tool-tip the "display column" - when browsing the master table, if you move the mouse to a column - containing a foreign key (use also the 'table_info' table);
    - (see - FAQ 6.7)
    • -
  • in edit/insert mode, display a drop-down list of possible foreign - keys (key value and "display column" are shown)
    - (see - FAQ 6.21)
    • -
  • display links on the table properties page, to check referential - integrity (display missing foreign keys) for each described key; -
    • -
  • in query-by-example, create automatic joins (see - FAQ 6.6)
    • -
  • enable you to get a PDF - schema of your database (also uses the table_coords table).
    • -
- - The keys can be numeric or character.

- - To allow the usage of this functionality: - -
  • set up pmadb and the phpMyAdmin - configuration storage
    • -
  • put the relation table name in - $cfg['Servers'][$i]['relation']
    • -
  • now as normal user open phpMyAdmin and for each one of your - tables where you want to use this feature, click - "Structure/Relation view/" and choose foreign - columns. -
    • -
- - Please note that in the current version, master_db - must be the same as foreign_db. Those columns have been put in - future development of the cross-db relations. -
- -
- $cfg['Servers'][$i]['table_info'] string -
-
- Since release 2.3.0 you can describe, in a special 'table_info' - table, which column is to be displayed as a tool-tip when moving the - cursor over the corresponding key.
- This configuration variable will hold the name of this special - table. To allow the usage of this functionality: -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in - $cfg['Servers'][$i]['table_info'] (e.g. - 'pma_table_info')
    • -
  • then for each table where you want to use this feature, - click "Structure/Relation view/Choose column to display" - to choose the column.
    • -
- Usage tip: Display column. -
-
- $cfg['Servers'][$i]['table_coords'] string
- $cfg['Servers'][$i]['pdf_pages'] string -
-
Since release 2.3.0 you can have phpMyAdmin create - PDF pages showing - the relations between your tables. To do this it needs two tables - "pdf_pages" (storing information about the available - PDF - pages) and "table_coords" (storing coordinates where each - table will be placed on a PDF - schema output).

- - You must be using the "relation" feature.

- - To allow the usage of this functionality: - -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the correct table names in - $cfg['Servers'][$i]['table_coords'] and - $cfg['Servers'][$i]['pdf_pages']
    • -
- - Usage tips: PDF output. -
- -
- $cfg['Servers'][$i]['column_info'] string -
-
- Since release 2.3.0 you can store comments to describe each column for - each table. These will then be shown on the "printview". -

- - Starting with release 2.5.0, comments are consequently used on the table - property pages and table browse view, showing up as tool-tips above the - column name (properties page) or embedded within the header of table in - browse view. They can also be shown in a table dump. Please see the - relevant configuration directives later on.

- - Also new in release 2.5.0 is a MIME-transformation system which is also - based on the following table structure. See - Transformations for further information. To use the - MIME-transformation system, your column_info table has to have the three - new columns 'mimetype', 'transformation', 'transformation_options'. -

- - To allow the usage of this functionality: -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in - $cfg['Servers'][$i]['column_info'] (e.g. - 'pma_column_info')
    • -
  • to update your PRE-2.5.0 Column_comments Table use this: - - 
    -ALTER TABLE `pma_column_comments`
-    ADD `mimetype` VARCHAR( 255 ) NOT NULL,
-    ADD `transformation` VARCHAR( 255 ) NOT NULL,
-    ADD `transformation_options` VARCHAR( 255 ) NOT NULL;
-
    - - and remember that the Variable in config.inc.php has been - renamed from
    - $cfg['Servers'][$i]['column_comments'] to - $cfg['Servers'][$i]['column_info']
    • -
-
- -
- $cfg['Servers'][$i]['history'] string -
-
Since release 2.5.0 you can store your - SQL history, which means - all queries you entered manually into the phpMyAdmin interface. If you - don't want to use a table-based history, you can use the JavaScript-based - history. Using that, all your history items are deleted when closing the - window.

- - Using - $cfg['QueryHistoryMax'] - you can specify an amount of history items you want to have on hold. On - every login, this list gets cut to the maximum amount.

- - The query history is only available if JavaScript is enabled in your - browser.

- - To allow the usage of this functionality: - -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in $cfg['Servers'][$i]['history'] - (e.g. 'pma_history') -
    • -
-
- -
- $cfg['Servers'][$i]['recent'] string -
-
- Since release 3.5.0 you can show recently used tables in the left navigation frame. - It helps you to jump across table directly, without the need to select the database, - and then select the table. Using - $cfg['LeftRecentTable'] - you can configure the maximum number of recent tables shown. When you select a table - from the list, it will jump to the page specified in - $cfg['LeftDefaultTabTable'].

- - Without configuring the storage, you can still access the recently used tables, - but it will disappear after you logout.

- - To allow the usage of this functionality persistently: - -
    -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in $cfg['Servers'][$i]['recent'] (e.g. 'pma_recent')
    • -
-
- -
- $cfg['Servers'][$i]['table_uiprefs'] string -
-
- Since release 3.5.0 phpMyAdmin can be configured to remember several things - (sorted column - $cfg['RememberSorting'] - , column order, and column visibility from a database table) for browsing tables. - Without configuring the storage, these features still can be used, - but the values will disappear after you logout.

- - To allow the usage of these functionality persistently: - -
    -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in $cfg['Servers'][$i]['table_uiprefs'] (e.g. 'pma_table_uiprefs')
    • -
-
- -
- $cfg['Servers'][$i]['tracking'] string -
-
- Since release 3.3.x a tracking mechanism is available. - It helps you to track every SQL command which - is executed by phpMyAdmin. The mechanism supports logging of data manipulation - and data definition statements. After enabling it you can create versions of tables. -

- The creation of a version has two effects: - -
    -
  • phpMyAdmin saves a snapshot of the table, including structure and indexes.
    • -
  • phpMyAdmin logs all commands which change the structure and/or data of the table and links these commands with the version number.
    • -
- - Of course you can view the tracked changes. On the "Tracking" page a complete report is available for every version. - For the report you can use filters, for example you can get a list of statements within a date range. - When you want to filter usernames you can enter * for all names or you enter a list of names separated by ','. - In addition you can export the (filtered) report to a file or to a temporary database. -

- - To allow the usage of this functionality: - -
    -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in $cfg['Servers'][$i]['tracking'] (e.g. 'pma_tracking')
    • -
-
- -
- $cfg['Servers'][$i]['tracking_version_auto_create'] boolean -
-
- Whether the tracking mechanism creates versions for tables and views automatically. Default value is false. -

- If this is set to true and you create a table or view with - -
    -
  • CREATE TABLE ...
    • -
  • CREATE VIEW ...
    • -
- - and no version exists for it, the mechanism will - create a version for you automatically. -
- -
- $cfg['Servers'][$i]['tracking_default_statements'] string -
-
- Defines the list of statements the auto-creation uses for new versions. Default value is -
- -
CREATE TABLE,ALTER TABLE,DROP TABLE,RENAME TABLE,
-CREATE INDEX,DROP INDEX,
-INSERT,UPDATE,DELETE,TRUNCATE,REPLACE,
-CREATE VIEW,ALTER VIEW,DROP VIEW,
-CREATE DATABASE,ALTER DATABASE,DROP DATABASE
-
- -
- $cfg['Servers'][$i]['tracking_add_drop_view'] boolean -
-
- Whether a DROP VIEW IF EXISTS statement will be added as first line to the log when creating a view. Default value is true. -

-
- - -
- $cfg['Servers'][$i]['tracking_add_drop_table'] boolean -
-
- Whether a DROP TABLE IF EXISTS statement will be added as first line to the log when creating a table. Default value is true. -

-
- -
- $cfg['Servers'][$i]['tracking_add_drop_database'] boolean -
-
- Whether a DROP DATABASE IF EXISTS statement will be added as first line to the log when creating a database. Default value is true. -

-
- -
- $cfg['Servers'][$i]['userconfig'] string -
-
- Since release 3.4.x phpMyAdmin allows users to set most preferences by themselves - and store them in the database. -

- - If you don't allow for storing preferences in pmadb, users can - still personalize phpMyAdmin, but settings will be saved in browser's local storage, - or, it is is unavailable, until the end of session. -

- - To allow the usage of this functionality: - -
    -
  • set up pmadb and the phpMyAdmin - configuration storage
    • -
  • put the table name in $cfg['Servers'][$i]['userconfig']
    • -
-
- -
- $cfg['Servers'][$i]['designer_coords'] string -
-
Since release 2.10.0 a Designer interface is available; it permits - to visually manage the relations. -

- - To allow the usage of this functionality: - -
  • set up pmadb and the phpMyAdmin configuration storage
    • -
  • put the table name in $cfg['Servers'][$i]['designer_coords'] (e.g. 'pma_designer_coords') -
    • -
-
- -
$cfg['Servers'][$i]['MaxTableUiprefs'] integer -
-
Maximum number of rows saved in $cfg['Servers'][$i]['table_uiprefs'] table.

- - When tables are dropped or renamed, table_uiprefs may contain invalid - data (referring to tables which no longer exist).
- We only keep this number of newest rows in table_uiprefs and automatically delete older rows.
- -
$cfg['Servers'][$i]['verbose_check'] boolean -
-
Because release 2.5.0 introduced the new MIME-transformation support, the - column_info table got enhanced with three new columns. If the above variable - is set to TRUE (default) phpMyAdmin will check if you have the - latest table structure available. If not, it will emit a warning to the - superuser.

- - You can disable this checking behavior by setting the variable to false, - which should offer a performance increase.

- - Recommended to set to FALSE, when you are sure, your table structure is - up to date.
-
$cfg['Servers'][$i]['AllowRoot'] - boolean
-
Whether to allow root access. This is just a shortcut for the AllowDeny rules below. -
-
$cfg['Servers'][$i]['AllowNoPassword'] - boolean
-
Whether to allow logins without a password. The default - value of false for this parameter prevents unintended access - to a MySQL server with was left with an empty password for root or - on which an anonymous (blank) user is defined. -
-
- $cfg['Servers'][$i]['AllowDeny']['order'] string -
-
If your rule order is empty, then IP - authorization is disabled.

- - If your rule order is set to 'deny,allow' then the system applies - all deny rules followed by allow rules. Access is allowed by default. Any - client which does not match a Deny command or does match an Allow command - will be allowed access to the server.

- - If your rule order is set to 'allow,deny' then the system - applies all allow rules followed by deny rules. Access is denied by - default. Any client which does not match an Allow directive or does - match a Deny directive will be denied access to the server.

- - If your rule order is set to 'explicit', authorization is - performed in a similar fashion to rule order 'deny,allow', with the - added restriction that your host/username combination must be - listed in the allow rules, and not listed in the deny - rules. This is the most secure means of using Allow/Deny rules, - and was available in Apache by specifying allow and deny rules without - setting any order.

- - Please also see $cfg['TrustedProxies'] for detecting IP - address behind proxies. -
-
- $cfg['Servers'][$i]['AllowDeny']['rules'] array of strings -
-
The general format for the rules is as such: - - 
-<'allow' | 'deny'> <username> [from] <ipmask>
-
- - If you wish to match all users, it is possible to use a '%' as - a wildcard in the username field.
- There are a few shortcuts you can use in the ipmask field as - well (please note that those containing SERVER_ADDRESS might not be - available on all webservers): - 
-'all' -> 0.0.0.0/0
-'localhost' -> 127.0.0.1/8
-'localnetA' -> SERVER_ADDRESS/8
-'localnetB' -> SERVER_ADDRESS/16
-'localnetC' -> SERVER_ADDRESS/24
-
- - Having an empty rule list is equivalent to either using - 'allow % from all' if your rule order is set to - 'deny,allow' or 'deny % from all' if your rule order - is set to 'allow,deny' or 'explicit'.

- - For the IP matching system, the - following work:
- xxx.xxx.xxx.xxx (an exact IP address)
- xxx.xxx.xxx.[yyy-zzz] (an IP address range)
- xxx.xxx.xxx.xxx/nn (CIDR, Classless Inter-Domain Routing type IP addresses)
- But the following does not work:
- xxx.xxx.xxx.xx[yyy-zzz] (partial - IP address range)
- Also IPv6 addresses are not supported. -
-
$cfg['Servers'][$i]['DisableIS'] boolean
-
Disable using INFORMATION_SCHEMA to retrieve information (use SHOW commands instead), because of speed issues when many databases are present. Currently used in some parts of the code, more to come. -
-
$cfg['Servers'][$i]['ShowDatabasesCommand'] string
-
On a server with a huge number of databases, the default SHOW - DATABASES command used to fetch the name of available databases will - probably be too slow, so it can be replaced by faster commands (see - libraries/config.default.php for examples). -
-
$cfg['Servers'][$i]['CountTables'] boolean
-
Whether to count the number of tables for each database when preparing the list of databases for the navigation frame. -
-
$cfg['Servers'][$i]['SignonScript'] string
-
Name of PHP script to be sourced and executed to obtain - login credentials. This is alternative approach to session based single - signon. The script needs to provide function - get_login_credentials which returns list of username and - password, accepting single parameter of existing username (can be empty). - See examples/signon-script.php for an example. -
-
$cfg['Servers'][$i]['SignonSession'] string
-
Name of session which will be used for signon authentication method. - You should use something different than phpMyAdmin, because - this is session which phpMyAdmin uses internally. Takes effect only if - SignonScript - is not configured. -
-
$cfg['Servers'][$i]['SignonURL'] string
-
URL where user will be - redirected to log in for signon authentication method. Should be absolute - including protocol. -
-
$cfg['Servers'][$i]['LogoutURL'] string
-
URL where user will be - redirected after logout (doesn't affect config authentication method). - Should be absolute including protocol. -
- -
$cfg['ServerDefault'] integer
-
If you have more than one server configured, you can set - $cfg['ServerDefault'] to any one of them to autoconnect to - that server when phpMyAdmin is started, or set it to 0 to be given a - list of servers without logging in.
- If you have only one server configured, $cfg['ServerDefault'] - MUST be set to that server.
- -
$cfg['AjaxEnable'] boolean
-
Defines whether to refresh only parts of certain pages using Ajax - techniques. Applies only where a non-Ajax behavior is possible; - for example, the Designer feature is Ajax-only so this directive - does not apply to it.
- -
$cfg['VersionCheck'] boolean
-
Enables check for latest versions using javascript on main phpMyAdmin - page.
- -
$cfg['MaxDbList'] integer
-
The maximum number of database names to be displayed in the - navigation frame and the database list.
- -
$cfg['MaxTableList'] integer
-
The maximum number of table names to be displayed in the - main panel's list (except on the Export page). This limit is also enforced in the navigation panel - when in Light mode.
- -
$cfg['ShowHint'] boolean
-
Whether or not to show hints (for example, hints when hovering over table headers).
- -
$cfg['MaxCharactersInDisplayedSQL'] integer
-
The maximum number of characters when a - SQL query is displayed. The default limit of 1000 should be correct - to avoid the display of tons of hexadecimal codes that represent BLOBs, but - some users have real SQL - queries that are longer than 1000 characters. Also, if a query's length - exceeds this limit, this query is not saved in the history.
- -
$cfg['OBGzip'] string/boolean
-
Defines whether to use GZip output buffering for increased - speed in HTTP transfers.
- Set to true/false for enabling/disabling. When set to 'auto' (string), - phpMyAdmin tries to enable output buffering and will automatically disable - it if your browser has some problems with buffering. IE6 with a certain patch - is known to cause data corruption when having enabled buffering.
- -
$cfg['PersistentConnections'] boolean
-
Whether persistent connections - should be used or not. Works with following extensions: -
- -
$cfg['ForceSSL'] boolean
-
Whether to force using https while accessing phpMyAdmin.
- -
$cfg['ExecTimeLimit'] integer [number of seconds]
-
Set the number of seconds a script is allowed to run. If seconds is set - to zero, no time limit is imposed.
- This setting is used while importing/exporting dump files and in the - Synchronize feature but has no effect when PHP is running in safe mode.
- -
$cfg['SessionSavePath'] string
-
Path for storing session data (session_save_path PHP parameter).
- -
$cfg['MemoryLimit'] string [number of bytes]
-
Set the number of bytes a script is allowed to allocate. If set - to zero, no limit is imposed.
- This setting is used while importing/exporting dump files and at some - other places in phpMyAdmin so you definitely don't want to put here - a too low value. It has no effect when PHP is running in safe mode.
- You can also use any string as in php.ini, eg. '16M'. Ensure - you don't omit the suffix (16 means 16 bytes!)
- -
$cfg['SkipLockedTables'] boolean
-
Mark used tables and make it possible to show databases with locked - tables (since MySQL 3.23.30).
- -
$cfg['ShowSQL'] boolean
-
Defines whether SQL queries - generated by phpMyAdmin should be displayed or not.
- -
$cfg['RetainQueryBox'] boolean
-
Defines whether the SQL - query box should be kept displayed after its submission.
- -
$cfg['AllowUserDropDatabase'] boolean
-
Defines whether normal users (non-administrator) are allowed to - delete their own database or not. If set as FALSE, the link "Drop - Database" will not be shown, and even a "DROP DATABASE - mydatabase" will be rejected. Quite practical for - ISP's with many - customers.
- Please note that this limitation of - SQL queries is not as strict as when using MySQL privileges. This - is due to nature of SQL queries - which might be quite complicated. So this choice should be viewed as - help to avoid accidental dropping rather than strict privilege - limitation.
- -
$cfg['Confirm'] boolean
-
Whether a warning ("Are your really sure...") should be - displayed when you're about to lose data.
- -
$cfg['LoginCookieRecall'] boolean
-
Define whether the previous login should be recalled or not in cookie - authentication mode.

- - This is automatically disabled if you do not have configured - $cfg['blowfish_secret']. -
- -
$cfg['LoginCookieValidity'] integer [number of seconds]
-
Define how long is login cookie valid. Please note that php - configuration option session.gc_maxlifetime - might limit session validity and if session is lost, login cookie is - also invalidated. So it is a good idea to set session.gc_maxlifetime - not lower than the value of $cfg['LoginCookieValidity'].
- -
$cfg['LoginCookieStore'] integer [number of seconds]
-
Define how long login cookie should be stored in browser. Default 0 - means that it will be kept for existing session. This is recommended - for not trusted environments.
- -
$cfg['LoginCookieDeleteAll'] boolean
-
If enabled (default), logout deletes cookies for all servers, - otherwise only for current one. Setting this to false makes it easy to - forget to log out from other server, when you are using more of - them.
- -
$cfg['UseDbSearch'] boolean
-
Define whether the "search string inside database" is enabled or not.
- -
$cfg['IgnoreMultiSubmitErrors'] boolean
-
Define whether phpMyAdmin will continue executing a multi-query - statement if one of the queries fails. Default is to abort execution.
- -
$cfg['VerboseMultiSubmit'] boolean
-
Define whether phpMyAdmin will output the results of each query of a - multi-query statement embedded into the - SQL output as inline - comments. Defaults to TRUE.
-
- $cfg['AllowArbitraryServer'] boolean
-
If enabled, allows you to log in to arbitrary servers using cookie auth and permits to specify servers of your choice in the Synchronize dialog. -

- - NOTE: Please use this carefully, as this may allow users access to - MySQL servers behind the firewall where your - HTTP server is placed. -
- -
$cfg['Error_Handler']['display'] boolean
-
Whether to display errors from PHP or not.
- -
$cfg['Error_Handler']['gather'] boolean
-
Whether to gather errors from PHP or not.
- -
$cfg['LeftFrameLight'] boolean
-
Defines whether to use a select-based menu and display only the current - tables in the left frame (smaller page). Only in Non-Lightmode you can - use the feature to display nested folders using - $cfg['LeftFrameTableSeparator'] -
- -
$cfg['LeftFrameDBTree'] boolean
-
Defines whether to display the names of databases (in the - selector) using a tree, see also - $cfg['LeftFrameDBSeparator']. -
- -
$cfg['LeftFrameDBSeparator'] - string or array
-
The string used to separate the parts of the database name when showing - them in a tree. Alternatively you can specify more strings in an array - and all of them will be used as a separator.
- -
$cfg['LeftFrameTableSeparator'] string
-
Defines a string to be used to nest table spaces. Defaults to '__'. - This means if you have tables like 'first__second__third' this will be - shown as a three-level hierarchy like: first > second > third. - If set to FALSE or empty, the feature is disabled. NOTE: You should - not use this separator at the beginning or end of a - table name or multiple times after another without any other - characters in between.
- -
$cfg['LeftFrameTableLevel'] string
-
Defines how many sublevels should be displayed when splitting - up tables by the above separator.
- -
$cfg['LeftRecentTable'] integer
-
The maximum number of recently used tables shown in the left navigation - frame. Set this to 0 (zero) to disable the listing of recent tables.
- -
$cfg['ShowTooltip'] boolean
-
Defines whether to display table comment as tool-tip in left frame or - not.
- -
$cfg['ShowTooltipAliasDB'] boolean
-
If tool-tips are enabled and a DB comment is set, this will flip the - comment and the real name. That means that if you have a database called - 'user0001' and add the comment 'MyName' on it, you will see the name - 'MyName' used consequently in the left frame and the tool-tip shows - the real name of the DB.
- -
$cfg['ShowTooltipAliasTB'] boolean/string
-
Same as $cfg['ShowTooltipAliasDB'], except this works for table names. - - When setting this to 'nested', the Alias of the Tablename is only used - to split/nest the tables according to the - $cfg['LeftFrameTableSeparator'] - directive. So only the folder is called like the Alias, the tablename itself - stays the real tablename.
- - -
Defines whether or not to display the phpMyAdmin logo at the top of the left frame. - Defaults to TRUE.
- -
Enter URL where logo in the navigation frame will point to. - For use especially with self made theme which changes this. - The default value for this is main.php.
- -
$cfg['LeftLogoLinkWindow'] string
-
Whether to open the linked page in the main window (main) - or in a new one (new). Note: use new if you are - linking to phpmyadmin.net.
- -
$cfg['LeftDisplayTableFilterMinimum'] - integer
-
Defines the minimum number of tables to display a JavaScript filter box above the - list of tables in the left frame. - Defaults to 30. To disable the filter completely some high number - can be used (e.g. 9999)
- -
$cfg['LeftDisplayServers'] boolean
-
Defines whether or not to display a server choice at the top of the left frame. - Defaults to FALSE.
-
$cfg['DisplayServersList'] boolean
-
Defines whether to display this server choice as links instead of in a drop-down. - Defaults to FALSE (drop-down).
-
$cfg['DisplayDatabasesList'] boolean or text
-
Defines whether to display database choice in light navigation frame as links - instead of in a drop-down. Defaults to 'auto' - on main page list is - shown, when database is selected, only drop down is displayed.
- -
$cfg['LeftDefaultTabTable'] string
-
Defines the tab displayed by default when clicking the small - icon next to each table name in the navigation panel. Possible - values: "tbl_structure.php", - "tbl_sql.php", "tbl_select.php", - "tbl_change.php" or "sql.php".
- -
$cfg['ShowStats'] boolean
-
Defines whether or not to display space usage and statistics about databases - and tables.
- Note that statistics requires at least MySQL 3.23.3 and that, at this - date, MySQL doesn't return such information for Berkeley DB tables.
- -
$cfg['ShowServerInfo'] boolean
-
Defines whether to display detailed server information on main page. - You can additionally hide more information by using - $cfg['Servers'][$i]['verbose']. -
- -
$cfg['ShowPhpInfo'] boolean
- $cfg['ShowChgPassword'] boolean
- $cfg['ShowCreateDb'] boolean -
-
Defines whether to display the "PHP information" and - "Change password " links and form for creating database or - not at the starting main (right) frame. This setting - does not check MySQL commands entered directly.

- - Please note that to block the usage of phpinfo() in scripts, you - have to put this in your php.ini: - - 
disable_functions = phpinfo()
- - Also note that enabling the "Change password " link has no - effect with "config" authentication mode: because of the - hard coded password value in the configuration file, end users can't - be allowed to change their passwords.
- -
$cfg['SuggestDBName'] boolean
-
Defines whether to suggest a database name on the - "Create Database" form or to keep the textfield empty.
- -
$cfg['NavigationBarIconic'] string
-
Defines whether navigation bar buttons and the right panel top menu - contain text or symbols only. A value of TRUE displays icons, FALSE - displays text and 'both' displays both icons and text.
- -
$cfg['ShowAll'] boolean
-
Defines whether a user should be displayed a - "Show all" button in browse mode or not in all cases. - By default it is shown only on small tables (less than 5 × - $cfg['MaxRows'] rows) to avoid performance - issues while getting too many rows.
- -
$cfg['MaxRows'] integer
-
Number of rows displayed when browsing a result set and no LIMIT - clause is used. If the result set contains more rows, "Previous" and "Next" links will be shown.
- -
$cfg['Order'] string [DESC|ASC|SMART]
-
Defines whether columns are displayed in ascending (ASC) order, - in descending (DESC) order or in a "smart" - (SMART) order - I.E. descending order for columns of type TIME, - DATE, DATETIME and TIMESTAMP, ascending order else- by default.
- -
$cfg['DisplayBinaryAsHex'] boolean
-
Defines whether the "Show binary contents as HEX" browse - option is ticked by default.
- -
$cfg['ProtectBinary'] boolean or string
-
Defines whether BLOB or BINARY columns are protected - from editing when browsing a table's content. Valid values are: -
  • FALSE to allow editing of all columns;
    • -
  • 'blob' to allow editing of all columns except BLOBS;
    • -
  • 'all' to disallow editing of all BINARY or - BLOB columns.
    • -
-
- -
$cfg['ShowFunctionFields'] boolean
-
Defines whether or not MySQL functions fields should be initially - displayed in edit/insert mode. Since version 2.10, the user can - toggle this setting from the interface. -
- -
$cfg['ShowFieldTypesInDataEditView'] boolean
-
Defines whether or not type fields should be initially - displayed in edit/insert mode. The user can - toggle this setting from the interface. -
- -
$cfg['CharEditing'] string
-
Defines which type of editing controls should be used for CHAR and - VARCHAR columns. Possible values are: -
  • input - this allows to limit size of text to size of columns in - MySQL, but has problems with newlines in columns
    • -
  • textarea - no problems with newlines in columns, but also no - length limitations
    • -
- Default is old behavior so input.
- -
$cfg['MinSizeForInputField'] integer
-
Defines the minimum size for input fields generated for CHAR and - VARCHAR columns.
- -
$cfg['MaxSizeForInputField'] integer
-
Defines the maximum size for input fields generated for CHAR and - VARCHAR columns.
- -
$cfg['InsertRows'] integer
-
Defines the maximum number of concurrent entries for the Insert page.
- -
$cfg['ForeignKeyMaxLimit'] integer
-
If there are fewer items than this in the set of foreign keys, then a - drop-down box of foreign keys is presented, in the style described by the - $cfg['ForeignKeyDropdownOrder'] - setting.
- -
$cfg['ForeignKeyDropdownOrder'] array
-
For the foreign key drop-down fields, there are several methods of - display, offering both the key and value data. The contents of the - array should be one or both of the following strings: - 'content-id', 'id-content'.
- -
$cfg['ZipDump'] boolean
- $cfg['GZipDump'] boolean
- $cfg['BZipDump'] boolean -
-
Defines whether to allow the use of zip/GZip/BZip2 compression when - creating a dump file
- -
$cfg['CompressOnFly'] boolean
-
-
Defines whether to allow on the fly compression for GZip/BZip2 - compressed exports. This doesn't affect smaller dumps and allows users to - create larger dumps that won't otherwise fit in memory due to php - memory limit. Produced files contain more GZip/BZip2 headers, but all - normal programs handle this correctly.
- -
$cfg['LightTabs'] boolean
-
If set to TRUE, use less graphically intense tabs on the top of the - mainframe.
- -
$cfg['PropertiesIconic'] string
-
If set to TRUE, will display icons instead of text for db and table - properties links (like 'Browse', 'Select', 'Insert', ...).
Can be - set to 'both' if you want icons AND text.
- When set to FALSE, will only show text.
- -
$cfg['PropertiesNumColumns'] integer
-
How many columns will be utilized to display the tables on the - database property view? Default is 1 column. When setting this to a - value larger than 1, the type of the database will be omitted for more - display space.
- - -
$cfg['DefaultTabServer'] string
-
Defines the tab displayed by default on server view. Possible - values: "main.php" (recommended for multi-user setups), - "server_databases.php", "server_status.php", - "server_variables.php" or "server_privileges.php".
- -
$cfg['DefaultTabDatabase'] string
-
Defines the tab displayed by default on database view. Possible - values: "db_structure.php", - "db_sql.php" or "db_search.php".
- -
$cfg['DefaultTabTable'] string
-
Defines the tab displayed by default on table view. Possible - values: "tbl_structure.php", - "tbl_sql.php", "tbl_select.php", - "tbl_change.php" or "sql.php".
- -
$cfg['MySQLManualBase'] string
-
If set to an URL which - points to the MySQL documentation (type depends - on $cfg['MySQLManualType']), appropriate help links are - generated.
- See MySQL Documentation page - for more information about MySQL manuals and their types.
- -
$cfg['MySQLManualType'] string
-
Type of MySQL documentation: -
  • viewable - "viewable online", current one used on MySQL website
    • -
  • searchable - "Searchable, with user comments"
    • -
  • chapters - "HTML, one page per chapter"
    • -
  • big - "HTML, all on one page"
    • -
  • none - do not show documentation links
    • -
-
- -
$cfg['DefaultLang'] string
-
Defines the default language to use, if not browser-defined or - user-defined.
- The corresponding language file needs to be in - locale/code/LC_MESSAGES/phpmyadmin.mo. -
- -
$cfg['DefaultConnectionCollation'] string
-
Defines the default connection collation to use, if not - user-defined.
- See the MySQL - documentation for list of possible values. This setting is ignored when - connected to Drizzle server.
- -
$cfg['Lang'] string
-
Force language to use.
- The corresponding language file needs to be in - locale/code/LC_MESSAGES/phpmyadmin.mo. -
- -
$cfg['FilterLanguages'] string
-
Limit list of available languages to those matching the given regular - expression. For example if you want only Czech and English, you should - set filter to '^(cs|en)'.
- -
$cfg['RecodingEngine'] string
-
You can select here which functions will be used for character set - conversion. Possible values are: -
  • auto - automatically use available one (first is tested - iconv, then recode)
    • -
  • iconv - use iconv or libiconv functions
    • -
  • recode - use recode_string function
    • -
  • none - disable encoding conversion
    • -
- Default is auto.
-
- Enabled charset conversion activates a pull-down menu - in the Export and Import pages, to choose the character set when - exporting a file. The default value in this menu comes from - $cfg['Export']['charset'] and $cfg['Import']['charset']. -
- -
$cfg['IconvExtraParams'] string
-
Specify some parameters for iconv used in charset conversion. See - iconv - documentation for details. By default //TRANSLIT is - used, so that invalid characters will be transliterated.
- -
$cfg['AvailableCharsets'] array
-
Available character sets for MySQL conversion. You can add your own (any of - supported by recode/iconv) or remove these which you don't use. - Character sets will be shown in same order as here listed, so if you - frequently use some of these move them to the top.
- -
$cfg['TrustedProxies'] array
-
Lists proxies and HTTP headers which are trusted for IP Allow/Deny. This list is by - default empty, you need to fill in some trusted proxy servers if you - want to use rules for IP addresses behind proxy.

- - The following example specifies that phpMyAdmin should trust a - HTTP_X_FORWARDED_FOR (X-Forwarded-For) header coming from the proxy 1.2.3.4: -
-$cfg['TrustedProxies'] =
-     array('1.2.3.4' => 'HTTP_X_FORWARDED_FOR');
-
- The $cfg['Servers'][$i]['AllowDeny']['rules'] directive uses the - client's IP address as usual. -
- -
$cfg['GD2Available'] string
-
Specifies whether GD >= 2 is available. If yes it can be used for - MIME transformations.
- Possible values are: -
  • auto - automatically detect
    • -
  • yes - GD 2 functions can be used
    • -
  • no - GD 2 function cannot be used
    • -
- Default is auto. -
- -
$cfg['CheckConfigurationPermissions'] boolean
-
- We normally check the permissions on the configuration file to ensure - it's not world writable. However, phpMyAdmin could be installed on - a NTFS filesystem mounted on a non-Windows server, in which case the - permissions seems wrong but in fact cannot be detected. In this case - a sysadmin would set this parameter to FALSE. Default is TRUE. -
- -
$cfg['LinkLengthLimit'] integer
-
- Limit for length of URL in links. - When length would be above this limit, it is replaced by form with button. - This is required as some web servers ( - IIS) have problems with long - URLs. Default is 1000. -
- -
$cfg['DisableMultiTableMaintenance'] boolean
-
- In the database Structure page, it's possible to mark some tables then - choose an operation like optimizing for many tables. This can slow down - a server; therefore, setting this to true prevents this kind - of multiple maintenance operation. Default is false. -
- -
$cfg['NaviWidth'] integer
-
Navi frame width in pixels. See themes/themename/layout.inc.php. -
- -
$cfg['NaviBackground'] string [CSS color for background]
- $cfg['MainBackground'] string [CSS color for background] -
-
The background styles used for both the frames. - See themes/themename/layout.inc.php.
- -
$cfg['NaviPointerBackground'] string [CSS color for background]
- $cfg['NaviPointerColor'] string [CSS color]
-
The style used for the pointer in the navi frame. - See themes/themename/layout.inc.php.
- -
$cfg['LeftPointerEnable'] boolean
-
A value of TRUE activates the navi pointer (when LeftFrameLight - is FALSE).
- -
$cfg['Border'] integer
-
The size of a table's border. See themes/themename/layout.inc.php. -
- -
$cfg['ThBackground'] string [CSS color for background]
- $cfg['ThColor'] string [CSS color]
-
The style used for table headers. See - themes/themename/layout.inc.php.
- -
$cfg['BgOne'] string [CSS color]
-
The color (HTML) #1 for table rows. See themes/themename/layout.inc.php. -
- -
$cfg['BgTwo'] string [CSS color]
-
The color (HTML) #2 for table rows. See themes/themename/layout.inc.php. -
- -
$cfg['BrowsePointerBackground'] string [CSS color]
- $cfg['BrowsePointerColor'] string [CSS color]
- $cfg['BrowseMarkerBackground'] string [CSS color]
- $cfg['BrowseMarkerColor'] string [CSS color] -
-
The colors (HTML) uses for the pointer and the marker in browse mode.
- The former feature highlights the row over which your mouse is passing - and the latter lets you visually mark/unmark rows by clicking on - them. Highlighting / marking a column is done by hovering over / - clicking the column's header (outside of the text).
- See themes/themename/layout.inc.php.
- - -
$cfg['FontFamily'] string
-
You put here a valid CSS font family value, for example - arial, sans-serif.
- See themes/themename/layout.inc.php.
- -
$cfg['FontFamilyFixed'] string
-
You put here a valid CSS font family value, for example - monospace. This one is used in textarea.
- See themes/themename/layout.inc.php.
- -
$cfg['BrowsePointerEnable'] boolean
-
Whether to activate the browse pointer or not.
- -
$cfg['BrowseMarkerEnable'] boolean
-
Whether to activate the browse marker or not.
- -
$cfg['TextareaCols'] integer
- $cfg['TextareaRows'] integer
- $cfg['CharTextareaCols'] integer
- $cfg['CharTextareaRows'] integer -
-
Number of columns and rows for the textareas.
- This value will be emphasized (*2) for SQL query textareas and (*1.25) for - SQL textareas inside the query window.
- The Char* values are used for CHAR and VARCHAR editing (if configured - via $cfg['CharEditing']).
- -
$cfg['LongtextDoubleTextarea'] boolean -
-
Defines whether textarea for LONGTEXT columns should have double size.
- -
$cfg['TextareaAutoSelect'] boolean -
-
Defines if the whole textarea of the query box will be selected on - click.
- -
$cfg['LimitChars'] integer
-
Maximum number of characters shown in any non-numeric field on browse view. - Can be turned off by a toggle button on the browse page.
- -
$cfg['RowActionLinks'] string -
-
Defines the place where table row links (Edit, Copy, - Delete) would be put when tables contents are displayed (you may - have them displayed at the left side, right side, both sides or nowhere). - "left" and "right" are parsed as "top" - and "bottom" with vertical display mode.
- -
$cfg['DefaultDisplay'] string
-
There are 3 display modes: horizontal, horizontalflipped and vertical. - Define which one is displayed by default. The first mode displays each - row on a horizontal line, the second rotates the headers by 90 - degrees, so you can use descriptive headers even though columns only - contain small values and still print them out. The vertical mode sorts - each row on a vertical lineup. -
- -
$cfg['RememberSorting'] boolean
-
If enabled, remember the sorting of each table when browsing them.
- -
$cfg['HeaderFlipType'] string
-
- The HeaderFlipType can be set to 'auto', 'css' or 'fake'. When using - 'css' the rotation of the header for horizontalflipped is done via - CSS. The CSS transformation currently works only in Internet - Explorer.If set to 'fake' PHP does the transformation for you, but of - course this does not look as good as CSS. The 'auto' option enables - CSS transformation when browser supports it and use PHP based one - otherwise. -
- -
$cfg['ShowBrowseComments'] boolean
- $cfg['ShowPropertyComments'] boolean -
-
By setting the corresponding variable to TRUE you can enable the - display of column comments in Browse or Property display. In browse - mode, the comments are shown inside the header. In property mode, - comments are displayed using a CSS-formatted dashed-line below the - name of the column. The comment is shown as a tool-tip for that column. -
- -
$cfg['SQLQuery']['Edit'] boolean
-
Whether to display an edit link to change a query in any SQL Query box.
- -
$cfg['SQLQuery']['Explain'] boolean
-
Whether to display a link to explain a SELECT query in any SQL Query box.
- -
$cfg['SQLQuery']['ShowAsPHP'] boolean
-
Whether to display a link to wrap a query in PHP code in any SQL Query box.
- -
$cfg['SQLQuery']['Validate'] boolean
-
Whether to display a link to validate a query in any SQL Query box. - See also $cfg_SQLValidator.
- -
$cfg['SQLQuery']['Refresh'] boolean
-
Whether to display a link to refresh a query in any SQL Query box.
- -
$cfg['UploadDir'] string
-
- The name of the directory where - SQL files have been - uploaded by other means than phpMyAdmin (for example, ftp). Those files - are available under a drop-down box when you click the database or - table name, then the Import tab. -

- - If you want different directory for each user, %u will be replaced - with username.

- - Please note that the file names must have the suffix ".sql" - (or ".sql.bz2" or ".sql.gz" if support for - compressed formats is enabled).

- - This feature is useful when your file is too big to be uploaded via - HTTP, or when file - uploads are disabled in PHP.

- - Please note that if PHP is running in safe mode, this directory must - be owned by the same user as the owner of the phpMyAdmin scripts. -

- - See also - FAQ 1.16 for - alternatives. -
- -
$cfg['SaveDir'] string
-
- The name of the directory where dumps can be saved.

- - If you want different directory for each user, %u will be replaced - with username.

- - Please note that the directory must exist and has to be writable for - the user running webserver.

- - Please note that if PHP is running in safe mode, this directory must - be owned by the same user as the owner of the phpMyAdmin scripts. -
- -
$cfg['TempDir'] string
-
- The name of the directory where temporary files can be stored. -

- - This is needed for importing ESRI Shapefiles, see - FAQ - 6.30 and to work around limitations of open_basedir for uploaded - files, see FAQ - 1.11. -

- - If the directory where phpMyAdmin is installed is subject to an - open_basedir restriction, you need to create a - temporary directory in some directory accessible by the web - server. However for security reasons, this directory should be outside - the tree published by webserver. If you cannot avoid having this - directory published by webserver, place at least an empty - index.html file there, so that directory listing is not - possible. -

- - This directory should have as strict permissions as possible as the only - user required to access this directory is the one who runs the - webserver. If you have root privileges, simply make this user owner of - this directory and make it accessible only by it: -

- -
-chown www-data:www-data tmp
-chmod 700 tmp
-
- - If you cannot change owner of the directory, you can achieve a similar - setup using ACL: - -
-chmod 700 tmp
-setfacl -m "g:www-data:rwx" tmp
-setfacl -d -m "g:www-data:rwx" tmp
-
- - If neither of above works for you, you can still make the directory - chmod 777, but it might impose risk of other users on - system reading and writing data in this directory. -
- -
$cfg['Export'] array
-
- In this array are defined default parameters for export, names of - items are similar to texts seen on export page, so you can easily - identify what they mean. -
- -
$cfg['Export']['method'] string
-
- Defines how the export form is displayed when it loads. Valid values are: -
    -
  • quick to display the minimum number of options to configure
    • -
  • custom to display every available option to configure
    • -
  • custom-no-form same as custom but does not display the option of using quick export
    • -
-
- -
$cfg['Import'] array
-
- In this array are defined default parameters for import, names of - items are similar to texts seen on import page, so you can easily - identify what they mean. -
- -
$cfg['SaveCellsAtOnce'] boolean
-
- Defines whether or not to save all edited cells at once in browse-mode. -
- -
$cfg['ShowDisplayDirection'] boolean
-
- Defines whether or not type display direction option is shown - when browsing a table. -
- -
$cfg['RepeatCells'] integer
-
- Repeat the headers every X cells, or 0 to deactivate. -
- -
$cfg['EditInWindow'] boolean
- $cfg['QueryWindowWidth'] integer
- $cfg['QueryWindowHeight'] integer
- $cfg['QueryHistoryDB'] boolean
- $cfg['QueryWindowDefTab'] string
- $cfg['QueryHistoryMax'] integer -
-
- All those variables affect the query window feature. A SQL link - or icon is always displayed on the left panel. If JavaScript is enabled in - your browser, a click on this opens a distinct query window, which is - a direct interface to enter SQL queries. Otherwise, the right panel - changes to display a query box.

- - The size of this query window can be customized with - $cfg['QueryWindowWidth'] and $cfg['QueryWindowHeight'] - - both integers for the size in pixels. Note that normally, those - parameters will be modified in layout.inc.php for the - theme you are using.

- - If $cfg['EditInWindow'] is set to true, a click on [Edit] - from the results page (in the "Showing Rows" section) - opens the query window and puts the current query - inside it. If set to false, clicking on the link puts the SQL - query in the right panel's query box. -

- The usage of the JavaScript query window is recommended if you have a - JavaScript enabled browser. Basic functions are used to exchange quite - a few variables, so most 4th generation browsers should be capable to - use that feature. It currently is only tested with Internet Explorer 6 - and Mozilla 1.x. -

- If $cfg['QueryHistoryDB'] is set to TRUE, all your Queries are logged - to a table, which has to be created by you (see $cfg['Servers'][$i]['history']). If set to FALSE, - all your queries will be appended to the form, but only as long as - your window is opened they remain saved. -

- When using the JavaScript based query window, it will always get - updated when you click on a new table/db to browse and will focus if - you click on "Edit SQL" after using a query. You can suppress updating - the query window by checking the box "Do not overwrite this query from - outside the window" below the query textarea. Then you can browse - tables/databases in the background without losing the contents of the - textarea, so this is especially useful when composing a query with - tables you first have to look in. The checkbox will get automatically - checked whenever you change the contents of the textarea. Please - uncheck the button whenever you definitely want the query window to - get updated even though you have made alterations. -

- If $cfg['QueryHistoryDB'] is set to TRUE you can specify the amount of - saved history items using $cfg['QueryHistoryMax']. -

- The query window also has a custom tabbed look to group the features. - Using the variable $cfg['QueryWindowDefTab'] you can specify the - default tab to be used when opening the query window. It can be set to - either 'sql', 'files', 'history' or 'full'.
- -
$cfg['BrowseMIME'] boolean
-
Enable MIME-transformations.
- -
$cfg['MaxExactCount'] integer
-
For InnoDB tables, determines for how large tables phpMyAdmin - should get the exact row count using SELECT COUNT. - If the approximate row count as returned by - SHOW TABLE STATUS is smaller than this value, - SELECT COUNT will be used, otherwise the approximate - count will be used. -
-
$cfg['MaxExactCountViews'] integer
-
For VIEWs, since obtaining the exact count could have an - impact on performance, this value is the maximum to be displayed, using - a SELECT COUNT ... LIMIT. Setting this to 0 bypasses - any row counting. -
- -
$cfg['NaturalOrder'] boolean
-
Sorts database and table names according to natural order (for example, - t1, t2, t10). Currently implemented in the left panel (Light mode) - and in Database view, for the table list.
- -
$cfg['InitialSlidersState'] string
-
If set to 'closed', the visual sliders are initially in a - closed state. A value of 'open' does the reverse. To completely - disable all visual sliders, use 'disabled'.
- -
$cfg['UserprefsDisallow'] array
-
Contains names of configuration options (keys in $cfg array) - that users can't set through user preferences. For possible values, refer - to libraries/config/user_preferences.forms.php.
- -
$cfg['UserprefsDeveloperTab'] boolean
-
Activates in the user preferences a tab containing options for - developers of phpMyAdmin.
- -
$cfg['TitleTable'] string
-
$cfg['TitleDatabase'] string
-
$cfg['TitleServer'] string
-
$cfg['TitleDefault'] string
-
Allows you to specify window's title bar. You can use - format string expansion. -
- -
$cfg['ErrorIconic'] boolean
-
Uses icons for warnings, errors and informations.
- -
$cfg['MainPageIconic'] boolean
-
Uses icons on main page in lists and menu tabs.
- -
$cfg['ReplaceHelpImg'] boolean
-
Shows a help button instead of the "Documentation" message. -
- -
$cfg['ThemePath'] string
-
If theme manager is active, use this as the path of the subdirectory - containing all the themes.
- -
$cfg['ThemeManager'] boolean
-
Enables user-selectable themes. See - FAQ 2.7.
- -
$cfg['ThemeDefault'] string
-
The default theme (a subdirectory under cfg['ThemePath']).
- -
$cfg['ThemePerServer'] boolean
-
Whether to allow different theme for each server.
- -
$cfg['DefaultQueryTable'] string
- $cfg['DefaultQueryDatabase'] string -
-
Default queries that will be displayed in query boxes when user didn't - specify any. You can use standard - format string expansion. -
- -
$cfg['SQP']['fmtType'] string [html|none]
-
- The main use of the new SQL Parser is to pretty-print SQL queries. By - default we use HTML to format the query, but you can disable this by - setting this variable to 'none'. -
- -
$cfg['SQP']['fmtInd'] float
- $cfg['SQP']['fmtIndUnit'] string [em|px|pt|ex]
-
For the pretty-printing of SQL queries, under some cases the part of a - query inside a bracket is indented. By changing - $cfg['SQP']['fmtInd'] you can change the amount of this indent. -
Related in purpose is $cfg['SQP']['fmtIndUnit'] which - specifies the units of the indent amount that you specified. This is - used via stylesheets.
- -
$cfg['SQP']['fmtColor'] array of string tuples
-
This array is used to define the colours for each type of element of - the pretty-printed SQL queries. The tuple format is
- class => [HTML colour code | empty string]
- If you specify an empty string for the color of a class, it is ignored - in creating the stylesheet. - You should not alter the class names, only the colour strings.
- Class name key: -
  • comment Applies to all comment sub-classes
    • -
  • comment_mysql Comments as "#...\n"
    • -
  • comment_ansi Comments as "-- ...\n"
    • -
  • comment_c Comments as "/*...*/"
    • -
  • digit Applies to all digit sub-classes
    • -
  • digit_hex Hexadecimal numbers
    • -
  • digit_integer Integer numbers
    • -
  • digit_float Floating point numbers
    • -
  • punct Applies to all punctuation sub-classes
    • -
  • punct_bracket_open_round Opening brackets"("
    • -
  • punct_bracket_close_round Closing brackets ")"
    • -
  • punct_listsep List item Separator ","
    • -
  • punct_qualifier Table/Column Qualifier "."
    • -
  • punct_queryend End of query marker ";"
    • -
  • alpha Applies to all alphabetic classes
    • -
  • alpha_columnType Identifiers matching a column type
    • -
  • alpha_columnAttrib Identifiers matching a database/table/column attribute
    • -
  • alpha_functionName Identifiers matching a MySQL function name
    • -
  • alpha_reservedWord Identifiers matching any other reserved word
    • -
  • alpha_variable Identifiers matching a SQL variable "@foo"
    • -
  • alpha_identifier All other identifiers
    • -
  • quote Applies to all quotation mark classes
    • -
  • quote_double Double quotes "
    • -
  • quote_single Single quotes '
    • -
  • quote_backtick Backtick quotes `
    • -
-
- -
$cfg['SQLValidator'] boolean
-
$cfg['SQLValidator']['use'] boolean
-
phpMyAdmin now supports use of the Mimer SQL Validator service, - as originally published on - Slashdot. -
- For help in setting up your system to use the service, see the - FAQ 6.14. -
- -
$cfg['SQLValidator']['username'] string
- $cfg['SQLValidator']['password'] string
-
The SOAP service allows you to log in with anonymous - and any password, so we use those by default. Instead, if - you have an account with them, you can put your login details - here, and it will be used in place of the anonymous login.
-
-
- -
$cfg['DBG']
-
DEVELOPERS ONLY!
- -
$cfg['DBG']['sql'] boolean
-
DEVELOPERS ONLY!
- Enable logging queries and execution times to be displayed in the bottom - of main page (right frame).
- -
$cfg['ColumnTypes'] array
-
All possible types of a MySQL column. In most cases you don't need to - edit this.
- -
$cfg['AttributeTypes'] array
-
Possible attributes for columns. In most cases you don't need to edit - this.
- -
$cfg['Functions'] array
-
A list of functions MySQL supports. In most cases you don't need to - edit this.
- -
$cfg['RestrictColumnTypes'] array
-
Mapping of column types to meta types used for preferring displayed - functions. In most cases you don't need to edit this.
- -
$cfg['RestrictFunctions'] array
-
Functions preferred for column meta types as defined in - $cfg['RestrictColumnTypes']. In most cases you don't need - to edit this.
- -
$cfg['DefaultFunctions'] array
-
Functions selected by default when inserting/changing row, Functions - are defined for meta types from - $cfg['RestrictColumnTypes'] and for - first_timestamp, which is used for first timestamp column - in table.
- -
- - -

Transformations

- -
  1. Introduction
    2. -
  2. Usage
    3. -
  3. File structure
    4. -
- -

1. Introduction

- -

To enable transformations, you have to setup the column_info table - and the proper directives. Please see the Configuration - section on how to do so.

- -

You can apply different transformations to the contents of each column. The - transformation will take the content of each column and transform it with - certain rules defined in the selected transformation.

- -

Say you have a column 'filename' which contains a filename. Normally you would - see in phpMyAdmin only this filename. Using transformations you can transform - that filename into a HTML link, so you can click inside of the phpMyAdmin - structure on the column's link and will see the file displayed in a new browser - window. Using transformation options you can also specify strings to - append/prepend to a string or the format you want the output stored in.

- -

For a general overview of all available transformations and their options, - you can consult your - <www.your-host.com>/<your-install-dir>/transformation_overview.php - installation.

- -

For a tutorial on how to effectively use transformations, see our - Link section on - the official phpMyAdmin homepage.

- -

2. Usage

- -

Go to your tbl_structure.php page (i.e. reached through - clicking on the 'Structure' link for a table). There click on - "Change" (or change icon) and there you will see three new - fields at - the end of the line. They are called 'MIME-type', 'Browser transformation' and - 'Transformation options'.

- - - -

3. File structure

- -

All mimetypes and their transformations are defined through single files in - the directory 'libraries/transformations/'.

- -

They are stored in files to ease up customization and easy adding of new - transformations.

- -

Because the user cannot enter own mimetypes, it is kept sure that transformations - always work. It makes no sense to apply a transformation to a mimetype the - transform-function doesn't know to handle.

- -

One can, however, use empty mime-types and global transformations which should work - for many mimetypes. You can also use transforms on a different mimetype than what they where built - for, but pay attention to option usage as well as what the transformation does to your - column.

- -

There is a basic file called 'global.inc.php'. This function can be included by - any other transform function and provides some basic functions.

- -

There are 5 possible file names:

- -
  1. A mimetype+subtype transform:

    - - [mimetype]_[subtype]__[transform].inc.php

    - - Please not that mimetype and subtype are separated via '_', which shall - not be contained in their names. The transform function/filename may - contain only characters which cause no problems in the file system as - well as the PHP function naming convention.

    - - The transform function will the be called - 'PMA_transform_[mimetype]_[subtype]__[transform]()'.

    - - Example:

    - - text_html__formatted.inc.php
    - PMA_transform_text_html__formatted()
    2. - -
  2. A mimetype (w/o subtype) transform:

    - - [mimetype]__[transform].inc.php

    - - Please note that there are no single '_' characters. - The transform function/filename may contain only characters which cause - no problems in the file system as well as the PHP function naming - convention.

    - - The transform function will the be called - 'PMA_transform_[mimetype]__[transform]()'.

    - - Example:

    - - text__formatted.inc.php
    - PMA_transform_text__formatted()
    3. - -
  3. A mimetype+subtype without specific transform function

    - - [mimetype]_[subtype].inc.php

    - - Please note that there are no '__' characters in the filename. Do not - use special characters in the filename causing problems with the file - system.

    - - No transformation function is defined in the file itself.

    - - Example:

    - - text_plain.inc.php
    - (No function)
    4. - -
  4. A mimetype (w/o subtype) without specific transform function

    - - [mimetype].inc.php

    - - Please note that there are no '_' characters in the filename. Do not use - special characters in the filename causing problems with the file system. -

    - - No transformation function is defined in the file itself.

    - - Example:

    - - text.inc.php
    - (No function)
    5. - -
  5. A global transform function with no specific mimetype

    - - global__[transform].inc.php

    - - The transform function will the be called - 'PMA_transform_global__[transform]()'.

    - - Example:

    - - global__formatted
    - PMA_transform_global__formatted()
    6. -
- -

So generally use '_' to split up mimetype and subtype, and '__' to provide a - transform function.

- -

All filenames containing no '__' in themselves are not shown as valid transform - functions in the dropdown.

- -

Please see the libraries/transformations/TEMPLATE file for adding your own transform - function. See the libraries/transformations/TEMPLATE_MIMETYPE for adding a mimetype - without a transform function.

- -

To create a new transform function please see - libraries/transformations/template_generator.sh. - To create a new, empty mimetype please see - libraries/transformations/template_generator_mimetype.sh.

- -

A transform function always gets passed three variables:

- -
  1. $buffer - Contains the text inside of the column. This is the text, - you want to transform.
    2. -
  2. $options - Contains any user-passed options to a transform function - as an array.
    3. -
  3. $meta - Contains an object with information about your column. - The data is drawn from the output of the - mysql_fetch_field() - function. This means, all object properties described on the - manual page are - available in this variable and can be used to transform a column accordingly - to unsigned/zerofill/not_null/... properties.
    - The $meta->mimetype variable contains the original MIME-type of the - column (i.e. 'text/plain', 'image/jpeg' etc.)
    4. -
- -

Additionally you should also provide additional function to provide - information about the transformation to the user. This function should - have same name as transformation function just with appended - _info suffix. This function accepts no parameters and returns - array with information about the transformation. Currently following keys - can be used: -

-
-
info
-
Long description of the transformation.
-
- - -

FAQ - Frequently Asked Questions

- -
  1. Server
    2. -
  2. Configuration
    3. -
  3. Known limitations
    4. -
  4. ISPs, multi-user installations
    5. -
  5. Browsers or client OS
    6. -
  6. Using phpMyAdmin
    7. -
  7. phpMyAdmin project
    8. -
  8. Security
    9. -
  9. Synchronization
    10. -
- -

Please have a look at our - Link section on - the official phpMyAdmin homepage for in-depth coverage of phpMyAdmin's - features and or interface.

- -

Server

- -

- 1.1 My server is crashing each time a specific - action is required or phpMyAdmin sends a blank page or a page full of - cryptic characters to my browser, what can I do?

- -

Try to set the $cfg['OBGzip'] - directive to FALSE in your config.inc.php file and the - zlib.output_compression directive to Off in your php - configuration file.

- -

- 1.2 My Apache server crashes when using phpMyAdmin.

- -

You should first try the latest versions of Apache (and possibly MySQL).
- See also the - FAQ 1.1 - entry about PHP bugs with output buffering.
- If your server keeps crashing, please ask for help in the various Apache - support groups.

- -

- 1.3 (withdrawn).

- -

- 1.4 Using phpMyAdmin on - IIS, I'm displayed the - error message: "The specified CGI - application misbehaved by not returning a complete set of - HTTP headers ...". -

- -

You just forgot to read the install.txt file from the PHP distribution. - Have a look at the last message in this - bug report from the - official PHP bug database.

- -

- 1.5 Using phpMyAdmin on - IIS, I'm facing crashes - and/or many error messages with the - HTTP.

- -

This is a known problem with the PHP - ISAPI - filter: it's not so stable. Please use instead the cookie authentication mode. -

- -

- 1.6 I can't use phpMyAdmin on PWS: nothing is displayed!

- -

This seems to be a PWS bug. Filippo Simoncini found a workaround (at this - time there is no better fix): remove or comment the DOCTYPE - declarations (2 lines) from the scripts libraries/header.inc.php, - libraries/header_printview.inc.php, index.php, - navigation.php and libraries/common.lib.php.

- -

- 1.7 How can I GZip or Bzip a dump or a - CSV export? It does not seem to - work.

- -

These features are based on the gzencode() and bzcompress() - PHP functions to be more independent of the platform (Unix/Windows, Safe Mode - or not, and so on). So, you must have Zlib/Bzip2 - support (--with-zlib and --with-bz2).

- -

- 1.8 I cannot insert a text file in a table, and I get - an error about safe mode being in effect.

- -

Your uploaded file is saved by PHP in the "upload dir", as - defined in php.ini by the variable upload_tmp_dir (usually - the system default is /tmp).
- We recommend the following setup for Apache servers running in safe mode, - to enable uploads of files while being reasonably secure:

- - - -

- 1.9 (withdrawn).

- -

- 1.10 I'm having troubles when uploading files with - phpMyAdmin running on a secure server. My browser is Internet Explorer and - I'm using the Apache server.

- -

As suggested by "Rob M" in the phpWizard forum, add this line to - your httpd.conf:

- - 
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
- -

It seems to clear up many problems between Internet Explorer and SSL.

- -

- 1.11 I get an 'open_basedir restriction' while - uploading a file from the query box.

- -

Since version 2.2.4, phpMyAdmin supports servers with open_basedir - restrictions. However you need to create temporary directory and - configure it as $cfg['TempDir']. - The uploaded files will be moved there, and after execution of your - SQL commands, removed.

- -

- 1.12 I have lost my MySQL root password, what can I do?

- -

The MySQL manual explains how to - - reset the permissions.

- -

- 1.13 (withdrawn).

- -

- 1.14 (withdrawn).

- -

- 1.15 I have problems with mysql.user column names. -

- -

In previous MySQL versions, the User and Passwordcolumns - were named user and password. Please modify your column - names to align with current standards.

- -

- 1.16 I cannot upload big dump files (memory, - HTTP or timeout problems). -

- -

Starting with version 2.7.0, the import engine has been re–written and these - problems should not occur. If possible, upgrade your phpMyAdmin to the latest version - to take advantage of the new import features.

- -

The first things to check (or ask your host provider to check) are the - values of upload_max_filesize, memory_limit and - post_max_size in the php.ini configuration file. - All of these three settings limit the maximum size of data that can be - submitted and handled by PHP. One user also said that - post_max_size - and memory_limit need to be larger than upload_max_filesize.

- - There exist several workarounds if your upload is too big or your - hosting provider is unwilling to change the settings:

- - - -

- 1.17 Which MySQL versions does phpMyAdmin - support?

- -

Since phpMyAdmin 3.0.x, only MySQL 5.0.1 and newer are supported. For - older MySQL versions, you need to use the latest 2.x branch. phpMyAdmin can - connect to your MySQL server using PHP's classic - MySQL extension as well as the - improved MySQL extension (MySQLi) that - is available in PHP 5.0. The latter one should be used unless you have a - good reason not to do so.
- When compiling PHP, we strongly recommend that you manually link the MySQL - extension of your choice to a MySQL client library of at least the same - minor version since the one that is bundled with some PHP distributions is - rather old and might cause problems - (see FAQ 1.17a).

- MariaDB is also supported - (versions 5.1 and 5.2 were tested).

- Since phpMyAdmin 3.5 Drizzle is supported. -

- -
- 1.17a I cannot connect to the MySQL server. It always returns the error - message, "Client does not support authentication protocol requested - by server; consider upgrading MySQL client"
- -

You tried to access MySQL with an old MySQL client library. The version of - your MySQL client library can be checked in your phpinfo() output. - In general, it should have at least the same minor version as your server - - as mentioned in - FAQ 1.17.

- - This problem is generally caused by using MySQL version 4.1 or newer. MySQL - changed the authentication hash and your PHP is trying to use the old method. - The proper solution is to use the mysqli extension - with the proper client library to match your MySQL installation. Your - chosen extension is specified in $cfg['Servers'][$i]['extension']. - More information (and several workarounds) are located in the - MySQL Documentation. -

- -

- 1.18 (withdrawn).

- -

- 1.19 I can't run the "display relations" feature because the - script seems not to know the font face I'm using!

- -

The "FPDF" library we're using for this feature requires some - special files to use font faces.
- Please refers to the FPDF manual to build - these files.

- -

- 1.20 I receive the error "cannot load MySQL extension, please - check PHP Configuration".

- -

To connect to a MySQL server, PHP needs a set of MySQL functions called - "MySQL extension". This extension may be part of the PHP - distribution (compiled-in), otherwise it needs to be loaded dynamically. Its - name is probably mysql.so or php_mysql.dll. phpMyAdmin tried - to load the extension but failed.

- - Usually, the problem is solved by installing a software package called - "PHP-MySQL" or something similar.

- -

- 1.21 I am running the - CGI version of PHP under Unix, - and I cannot log in using cookie auth.

- -

In php.ini, set mysql.max_links higher than 1.

- -

- 1.22 I don't see the "Location of text file" field, - so I cannot upload.

- -

This is most likely because in php.ini, your file_uploads - parameter is not set to "on".

- -

- 1.23 I'm running MySQL on a Win32 machine. Each time I create - a new table the table and column names are changed to lowercase!

- -

This happens because the MySQL directive lower_case_table_names - defaults to 1 (ON) in the Win32 version of MySQL. You can change - this behavior by simply changing the directive to 0 (OFF):
- Just edit your my.ini file that should be located in your Windows - directory and add the following line to the group [mysqld]:

- -
set-variable = lower_case_table_names=0
- -

Next, save the file and restart the MySQL service. You can always check the - value of this directive using the query

- -
SHOW VARIABLES LIKE 'lower_case_table_names';
- -

- 1.24 (withdrawn).

- -

- 1.25 I am running Apache with mod_gzip-1.3.26.1a on Windows XP, - and I get problems, such as undefined variables when I run a - SQL query.

- -

A tip from Jose Fandos: put a comment on the following two lines - in httpd.conf, like this:

- -
-# mod_gzip_item_include file \.php$
-# mod_gzip_item_include mime "application/x-httpd-php.*"
-
- -

as this version of mod_gzip on Apache (Windows) has problems handling - PHP scripts. Of course you have to restart Apache.

- -

- 1.26 I just installed phpMyAdmin in my document root of - IIS but - I get the error "No input file specified" when trying to - run phpMyAdmin.

- -

This is a permission problem. Right-click on the phpmyadmin folder - and choose properties. Under the tab Security, click on "Add" - and select the user "IUSR_machine" from the list. Now set his - permissions and it should work.

- -

- 1.27 I get empty page when I want to view huge page (eg. - db_structure.php with plenty of tables).

- -

This is a PHP bug that occur when - GZIP output buffering is enabled. If you turn off it (by - $cfg['OBGzip'] = false - in config.inc.php), it should work. This bug will be fixed in - PHP 5.0.0.

- -

- 1.28 My MySQL server sometimes refuses queries and returns the - message 'Errorcode: 13'. What does this mean?

- -

This can happen due to a MySQL bug when having database / table names with - upper case characters although lower_case_table_names is set to 1. - To fix this, turn off this directive, convert all database and table names - to lower case and turn it on again. Alternatively, there's a bug-fix - available starting with MySQL 3.23.56 / 4.0.11-gamma.

- -

- 1.29 When I create a table or modify a column, I get an error - and the columns are duplicated.

- -

It is possible to configure Apache in such a way that PHP has problems - interpreting .php files.

- -

The problems occur when two different (and conflicting) set of directives - are used:

- -
-SetOutputFilter PHP
-SetInputFilter PHP
-
- -

and

- -
AddType application/x-httpd-php .php
- -

In the case we saw, one set of directives was in - /etc/httpd/conf/httpd.conf, while - the other set was in /etc/httpd/conf/addon-modules/php.conf.
- The recommended way is with AddType, so just comment out - the first set of lines and restart Apache:

- -
-#SetOutputFilter PHP
-#SetInputFilter PHP
-
- -

- 1.30 I get the error "navigation.php: Missing hash".

- -

This problem is known to happen when the server is running Turck MMCache - but upgrading MMCache to version 2.3.21 solves the problem.

- -

- 1.31 Does phpMyAdmin support php5?

- -

Yes.

-

- Since release 3.0 only PHP 5.2 and newer. For older PHP versions 2.9 branch - is still maintained. -

- -

- 1.32 Can I use HTTP authentication with IIS?

- -

Yes. This procedure was tested with phpMyAdmin 2.6.1, PHP 4.3.9 in ISAPI - mode under IIS 5.1.

- -
  1. In your php.ini file, set cgi.rfc2616_headers = 0
    2. -
  2. In Web Site Properties -> File/Directory Security -> Anonymous - Access dialog box, check the Anonymous access checkbox and - uncheck any other checkboxes (i.e. uncheck Basic authentication, - Integrated Windows authentication, and Digest if it's - enabled.) Click OK.
    3. -
  3. In Custom Errors, select the range of 401;1 through - 401;5 and click the Set to Default button.
    4. -
- -

- 1.33 (withdrawn).

- -

- 1.34 Can I access directly to database or table pages?

- -

Yes. Out of the box, you can use URLs like -http://server/phpMyAdmin/index.php?server=X&db=database&table=table&target=script. For server you use the server number which refers to -the order of the server paragraph in config.inc.php. - Table and script parts are optional. If you want - http://server/phpMyAdmin/database[/table][/script] URLs, you need to do - some configuration. Following lines apply only for Apache web server. First make sure, - that you have enabled some features within global configuration. You need - Options FollowSymLinks and AllowOverride - FileInfo enabled for directory where phpMyAdmin is installed and - you need mod_rewrite to be enabled. Then you just need to create following - .htaccess file in root folder of phpMyAdmin installation - (don't forget to change directory name inside of it):

- -
-RewriteEngine On
-RewriteBase /path_to_phpMyAdmin
-RewriteRule ^([a-zA-Z0-9_]+)/([a-zA-Z0-9_]+)/([a-z_]+\.php)$ index.php?db=$1&table=$2&target=$3 [R]
-RewriteRule ^([a-zA-Z0-9_]+)/([a-z_]+\.php)$ index.php?db=$1&target=$2 [R]
-RewriteRule ^([a-zA-Z0-9_]+)/([a-zA-Z0-9_]+)$ index.php?db=$1&table=$2 [R]
-RewriteRule ^([a-zA-Z0-9_]+)$ index.php?db=$1 [R]
-
- -

- 1.35 Can I use HTTP authentication with Apache CGI?

- -

Yes. However you need to pass authentication variable to CGI using - following rewrite rule:

- -
-RewriteEngine On
-RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization},L]
-
- -

- 1.36 I get an error "500 Internal Server Error". -

-

- There can be many explanations to this and a look at your server's - error log file might give a clue. -

- -

- 1.37 I run phpMyAdmin on cluster of different machines and - password encryption in cookie auth doesn't work.

- -

If your cluster consist of different architectures, PHP code used for - encryption/decryption won't work correct. This is caused by use of - pack/unpack functions in code. Only solution is to use mcrypt extension - which works fine in this case.

- -

- 1.38 Can I use phpMyAdmin on a server on which Suhosin is enabled?

- -

Yes but the default configuration values of Suhosin are known to cause - problems with some operations, for example editing a table with many - columns and no primary key or with textual primary key. -

-

- Suhosin configuration might lead to malfunction in some cases and it can - not be fully avoided as phpMyAdmin is kind of application which needs to - transfer big amounts of columns in single HTTP request, what is something - what Suhosin tries to prevent. Generally all - suhosin.request.*, suhosin.post.* and - suhosin.get.* directives can have negative effect on - phpMyAdmin usability. You can always find in your error logs which limit - did cause dropping of variable, so you can diagnose the problem and adjust - matching configuration variable. -

-

- The default values for most Suhosin configuration options will work in most - scenarios, however you might want to adjust at least following parameters: -

- - - -

- You can also disable the warning using the - SuhosinDisableWarning directive. -

- -

- 1.39 When I try to connect via https, I can log in, - but then my connection is redirected back to http. What can cause this - behavior?

- -

Be sure that you have enabled SSLOptions and StdEnvVars -in your Apache configuration. See http://httpd.apache.org/docs/2.0/mod/mod_ssl.html#ssloptions.

- -

- 1.40 When accessing phpMyAdmin via an Apache reverse proxy, cookie login does not work.

- -

To be able to use cookie auth Apache must know that it has to rewrite the set-cookie headers.
- Example from the Apache 2.2 documentation:

-
-ProxyPass /mirror/foo/ http://backend.example.com/
-ProxyPassReverse /mirror/foo/ http://backend.example.com/
-ProxyPassReverseCookieDomain backend.example.com public.example.com 
-ProxyPassReverseCookiePath / /mirror/foo/ 
-
- -

Note: if the backend url looks like http://host/~user/phpmyadmin, - the tilde (~) must be url encoded as %7E in the ProxyPassReverse* lines. - This is not specific to phpmyadmin, it's just the behavior of Apache. -

- -
-ProxyPass /mirror/foo/ http://backend.example.com/~user/phpmyadmin
-ProxyPassReverse /mirror/foo/
-http://backend.example.com/%7Euser/phpmyadmin
-ProxyPassReverseCookiePath /%7Euser/phpmyadmin /mirror/foo
-
- -

See http://httpd.apache.org/docs/2.2/mod/mod_proxy.html - for more details.

- -

- 1.41 When I view a database and ask to see its - privileges, I get an error about an unknown column.

- -

The MySQL server's privilege tables are not up to date, you need to run -the mysql_upgrade command on the server.

- -

- 1.42 How can I prevent robots from accessing phpMyAdmin?

- -

You can add various rules to .htaccess to filter access -based on user agent field. This is quite easy to circumvent, but could prevent at least -some robots accessing your installation.

- -
-RewriteEngine on
-
-# Allow only GET and POST verbs
-RewriteCond %{REQUEST_METHOD} !^(GET|POST)$ [NC,OR]
-
-# Ban Typical Vulnerability Scanners and others
-# Kick out Script Kiddies
-RewriteCond %{HTTP_USER_AGENT} ^(java|curl|wget).* [NC,OR]
-RewriteCond %{HTTP_USER_AGENT} ^.*(libwww-perl|curl|wget|python|nikto|wkito|pikto|scan|acunetix).* [NC,OR]
-RewriteCond %{HTTP_USER_AGENT} ^.*(winhttp|HTTrack|clshttp|archiver|loader|email|harvest|extract|grab|miner).* [NC,OR]
-
-# Ban Search Engines, Crawlers to your administrative panel
-# No reasons to access from bots
-# Ultimately Better than the useless robots.txt
-# Did google respect robots.txt?
-# Try google: intitle:phpMyAdmin intext:"Welcome to phpMyAdmin *.*.*" intext:"Log in" -wiki -forum -forums -questions intext:"Cookies must be enabled"
-RewriteCond %{HTTP_USER_AGENT} ^.*(AdsBot-Google|ia_archiver|Scooter|Ask.Jeeves|Baiduspider|Exabot|FAST.Enterprise.Crawler|FAST-WebCrawler|www\.neomo\.de|Gigabot|Mediapartners-Google|Google.Desktop|Feedfetcher-Google|Googlebot|heise-IT-Markt-Crawler|heritrix|ibm.com\cs/crawler|ICCrawler|ichiro|MJ12bot|MetagerBot|msnbot-NewsBlogs|msnbot|msnbot-media|NG-Search|lucene.apache.org|NutchCVS|OmniExplorer_Bot|online.link.validator|psbot0|Seekbot|Sensis.Web.Crawler|SEO.search.Crawler|Seoma.\[SEO.Crawler\]|SEOsearch|Snappy|www.urltrends.com|www.tkl.iis.u-tokyo.ac.jp/~crawler|SynooBot|crawleradmin.t-info@telekom.de|TurnitinBot|voyager|W3.SiteSearch.Crawler|W3C-checklink|W3C_Validator|www.WISEnutbot.com|yacybot|Yahoo-MMCrawler|Yahoo\!.DE.Slurp|Yahoo\!.Slurp|YahooSeeker).* [NC]
-RewriteRule .* - [F]
-
- - - -

Configuration

- -

- 2.1 The error message "Warning: Cannot add header information - - headers already sent by ..." is displayed, what's the problem?

- -

Edit your config.inc.php file and ensure there is nothing - (I.E. no blank lines, no spaces, no characters...) neither before the - <?php tag at the beginning, neither after the ?> - tag at the end. We also got a report from a user under - IIS, that used - a zipped distribution kit: the file libraries/Config.class.php - contained an end-of-line character (hex 0A) at the end; removing this character - cleared his errors.

- -

- 2.2 phpMyAdmin can't connect to MySQL. What's wrong?

- -

Either there is an error with your PHP setup or your username/password is - wrong. Try to make a small script which uses mysql_connect and see if it - works. If it doesn't, it may be you haven't even compiled MySQL support - into PHP.

- -

- 2.3 The error message "Warning: MySQL Connection Failed: Can't - connect to local MySQL server through socket '/tmp/mysql.sock' - (111) ..." is displayed. What can I do?

- -

For RedHat users, Harald Legner suggests this on the mailing list:

- -

On my RedHat-Box the socket of MySQL is /var/lib/mysql/mysql.sock. - In your php.ini you will find a line

- -
mysql.default_socket = /tmp/mysql.sock
- -

change it to

- -
mysql.default_socket = /var/lib/mysql/mysql.sock
- -

Then restart apache and it will work.

- -

Here is a fix suggested by Brad Ummer:

- - - -

Have also a look at the - - corresponding section of the MySQL documentation.

- -

- 2.4 Nothing is displayed by my browser when I try to run phpMyAdmin, - what can I do?

- -

Try to set the $cfg['OBGZip'] - directive to FALSE in the phpMyAdmin configuration file. It helps - sometime.
- Also have a look at your PHP version number: if it contains "b" or "alpha" - it means you're running a testing version of PHP. That's not a so good idea, - please upgrade to a plain revision.

- -

- 2.5 Each time I want to insert or change a row or drop a database - or a table, an error 404 (page not found) is displayed or, with HTTP or - cookie authentication, I'm asked to log in again. What's wrong?

- -

Check the value you set for the - $cfg['PmaAbsoluteUri'] - directive in the phpMyAdmin configuration file.

- -

- 2.6 I get an "Access denied for user: 'root@localhost' (Using - password: YES)"-error when trying to access a MySQL-Server on a - host which is port-forwarded for my localhost.

- -

When you are using a port on your localhost, which you redirect via - port-forwarding to another host, MySQL is not resolving the localhost - as expected.
- Erik Wasser explains: The solution is: if your host is "localhost" - MySQL (the command line tool mysql as well) always tries to use the socket - connection for speeding up things. And that doesn't work in this configuration - with port forwarding.
- If you enter "127.0.0.1" as hostname, everything is right and MySQL uses the - TCP connection.

- -

2.7 Using and creating themes

- -

Themes are configured with - $cfg['ThemePath'], - $cfg['ThemeManager'] and - $cfg['ThemeDefault'].
-
- Under $cfg['ThemePath'], you - should not delete the directory "original" or its underlying - structure, because this is the system theme used by phpMyAdmin. - "original" contains all images and styles, for backwards - compatibility and for all themes that would not include images or css-files. -

- - If $cfg['ThemeManager'] - is enabled, you can select your favorite theme on the main page. Your - selected theme will be stored in a cookie.

- -

To create a theme:

- - - -

In theme directory there is file info.inc.php which contains - theme verbose name, theme generation and theme version. These versions and - generations are enumerated from 1 and do not have any direct dependence on - phpMyAdmin version. Themes within same generation should be backwards - compatible - theme with version 2 should work in phpMyAdmin requiring - version 1. Themes with different generation are incompatible.

- -

If you do not want to use your own symbols and buttons, remove the - directory "img" in "your_theme_name". phpMyAdmin will - use the default icons and buttons (from the system-theme "original"). -

- -

- 2.8 I get "Missing parameters" errors, - what can I do?

- -

Here are a few points to check:

- - - -

- 2.9 Seeing an upload progress bar

- -

To be able to see a progress bar during your uploads, your server must -have either the APC extension - or the uploadprogress - one. Moreover, the JSON extension has to be enabled in your PHP.

-

If using APC, you must set apc.rfc1867 to on in your php.ini.

- -

Known limitations

- -

- 3.1 When using - HTTP authentication, a user - who logged out can not log in again in with the same nick.

- -

This is related to the authentication mechanism (protocol) used by - phpMyAdmin. To bypass this problem: just close all the opened - browser windows and then go back to phpMyAdmin. You should be able to - log in again.

- -

- 3.2 When dumping a large table in compressed mode, I get a memory - limit error or a time limit error.

- -

Compressed dumps are built in memory and because of this are limited to - php's memory limit. For GZip/BZip2 exports this can be overcome since 2.5.4 - using - $cfg['CompressOnFly'] - (enabled by default). Zip exports can not be handled this way, so if you need - Zip files for larger dump, you have to use another way.

- -

- 3.3 With InnoDB tables, I lose foreign key relationships - when I rename a table or a column.

- -

This is an InnoDB bug, see http://bugs.mysql.com/bug.php?id=21704.

- -

- 3.4 I am unable to import dumps I created with the mysqldump tool - bundled with the MySQL server distribution.

- -

The problem is that older versions of mysqldump created invalid comments like this:

- -
--- MySQL dump 8.22
---
--- Host: localhost Database: database
----------------------------------------------------------
--- Server version 3.23.54
-
- -

The invalid part of the code is the horizontal line made of dashes that - appears once in every dump created with mysqldump. If you want to run your - dump you have to turn it into valid MySQL. This means, you have to add a - whitespace after the first two dashes of the line or add a # before it: -
- - -- -------------------------------------------------------
- - or
- - #--------------------------------------------------------- - -

- -

- 3.5 When using nested folders there are some multiple hierarchies - displayed in a wrong manner?! ($cfg['LeftFrameTableSeparator'])

- -

Please note that you should not use the separating string multiple times - without any characters between them, or at the beginning/end of your table - name. If you have to, think about using another TableSeparator or disabling - that feature

- -

- 3.6 What is currently not supported in phpMyAdmin about InnoDB?

- -

In Relation view, being able to choose a table in another database, - or having more than one index column in the foreign key.

- In Query-by-example (Query), automatic generation of the query - LEFT JOIN from the foreign table.

-

- -

- 3.7 I have table with many (100+) columns and when I try to browse table - I get series of errors like "Warning: unable to parse url". How - can this be fixed?

-

- Your table neither have a primary key nor an unique one, so we must use a - long expression to identify this row. This causes problems to parse_url - function. The workaround is to create a primary or unique key. -
-

- -

- 3.8 I cannot use (clickable) HTML-forms in columns where I put - a MIME-Transformation onto!

- -

Due to a surrounding form-container (for multi-row delete checkboxes), no - nested forms can be put inside the table where phpMyAdmin displays the results. - You can, however, use any form inside of a table if keep the parent - form-container with the target to tbl_row_delete.php and just put your own - input-elements inside. If you use a custom submit input field, the form will - submit itself to the displaying page again, where you can validate the - $HTTP_POST_VARS in a transformation. - - For a tutorial on how to effectively use transformations, see our - Link section - on the official phpMyAdmin-homepage.

- -

- 3.9 I get error messages when using "--sql_mode=ANSI" for the - MySQL server

- -

When MySQL is running in ANSI-compatibility mode, there are some major - differences in how SQL is - structured (see - http://dev.mysql.com/doc/mysql/en/ansi-mode.html). Most important of all, - the quote-character (") is interpreted as an identifier quote character and - not as a string quote character, which makes many internal phpMyAdmin - operations into invalid SQL - statements. There is no workaround to this behaviour. News to this item will - be posted in Bug report - #816858 -

- -

- 3.10 Homonyms and no primary key: When the results of a SELECT display - more that one column with the same value - (for example SELECT lastname from employees where firstname like 'A%' and two "Smith" values are displayed), - if I click Edit I cannot be sure that I am editing the intended row.

- -

Please make sure that your table has a primary key, so that phpMyAdmin - can use it for the Edit and Delete links.

- -

- 3.11 The number of rows for InnoDB tables is not correct.

- -

phpMyAdmin uses a quick method to get the row count, and this method - only returns an approximate count in the case of InnoDB tables. See - $cfg['MaxExactCount'] for - a way to modify those results, but - this could have a serious impact on performance.

- -

- 3.12 (withdrawn).

- -

- 3.13 I get an error when entering USE followed by a db name - containing an hyphen. -

-

- The tests I have made with MySQL 5.1.49 shows that the - API does not accept this syntax for the USE command. -

- -

- 3.14 I am not able to browse a table when I don't have the right to SELECT one of the columns.

-

- This has been a known limitation of phpMyAdmin since the beginning and - it's not likely to be solved in the future. -

- - - -

- 3.15 (withdrawn).

- -

- 3.16 (withdrawn).

- -

- 3.17 (withdrawn).

- - - - -

- 3.18 When I import a - CSV file that contains multiple tables, they are lumped together into - a single table.

-

- There is no reliable way to differentiate tables in - CSV format. For the time being, you will have to break apart - CSV files containing multiple tables. -

- - - - -

- 3.19 When I import a file and have phpMyAdmin determine the appropriate data structure it only uses int, decimal, and varchar types.

-

- Currently, the import type-detection system can only assign these MySQL types to columns. In future, more will likely be added but for the time being - you will have to edit the structure to your liking post-import. -

- Also, you should note the fact that phpMyAdmin will use the size of the largest item in any given column as the column size for the appropriate type. If you - know you will be adding larger items to that column then you should manually adjust the column sizes accordingly. This is done for the sake of efficiency. -

- - - -

ISPs, multi-user installations

- -

- 4.1 I'm an ISP. Can I setup one central copy of phpMyAdmin or do I - need to install it for each customer. -

-

- Since version 2.0.3, you can setup a central copy of phpMyAdmin for all - your users. The development of this feature was kindly sponsored by - NetCologne GmbH. - This requires a properly setup MySQL user management and phpMyAdmin - HTTP or cookie authentication. See the install section on - "Using HTTP authentication". -

- -

- 4.2 What's the preferred way of making phpMyAdmin secure against evil - access. -

-

- This depends on your system.
- If you're running a server which cannot be accessed by other people, it's - sufficient to use the directory protection bundled with your webserver - (with Apache you can use .htaccess files, for example).
- If other people have telnet access to your server, you should use - phpMyAdmin's HTTP or cookie authentication features. -

- Suggestions: -

- - -

- 4.3 I get errors about not being able to include a file in - /lang or in /libraries. -

-

- Check php.ini, or ask your sysadmin to check it. The - include_path must contain "." somewhere in it, and - open_basedir, if used, must contain "." and - "./lang" to allow normal operation of phpMyAdmin. -

- -

- 4.4 phpMyAdmin always gives "Access denied" when using HTTP - authentication. -

- -

This could happen for several reasons:

- - - -

- 4.5 Is it possible to let users create their own databases?

- -

Starting with 2.2.5, in the user management page, you can enter a wildcard - database name for a user (for example "joe%"), - and put the privileges you want. For example, - adding SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, INDEX, ALTER - would let a user create/manage his/her database(s).

- -

- 4.6 How can I use the Host-based authentication additions?

- -

If you have existing rules from an old .htaccess file, you can take them - and add a username between the 'deny'/'allow' and - 'from' strings. Using the username wildcard of '%' would - be a major benefit here if your installation is suited to using it. Then - you can just add those updated lines into the - - $cfg['Servers'][$i]['AllowDeny']['rules'] array.

- -

If you want a pre-made sample, you can try this fragment. It stops the - 'root' user from logging in from any networks other than the private - network IP blocks.

- -
-//block root from logging in except from the private networks
-$cfg['Servers'][$i]['AllowDeny']['order'] = 'deny,allow';
-$cfg['Servers'][$i]['AllowDeny']['rules'] = array(
-    'deny root from all',
-    'allow root from localhost',
-    'allow root from 10.0.0.0/8',
-    'allow root from 192.168.0.0/16',
-    'allow root from 172.16.0.0/12',
-    );
-
- -

- 4.7 Authentication window is displayed more than once, why?

- -

This happens if you are using a URL to start phpMyAdmin which is - different than the one set in your - $cfg['PmaAbsoluteUri']. - For example, a missing "www", or entering with an IP address - while a domain name is defined in the config file.

- -

- 4.8 Which parameters can I use in the URL that starts phpMyAdmin?

- -

When starting phpMyAdmin, you can use the db, pma_username, pma_password and server parameters. This last one can contain either the numeric host index (from $i of the configuration file) or one of the host names present in the configuration file. Using pma_username and pma_password has been tested along with the usage of 'cookie' auth_type.

- -

Browsers or client OS

- -

- 5.1 I get an out of memory error, and my controls are non-functional, - when trying to create a table with more than 14 columns. -

-

- We could reproduce this problem only under Win98/98SE. Testing under - WinNT4 or Win2K, we could easily create more than 60 columns. -
- A workaround is to create a smaller number of columns, then come back to - your table properties and add the other columns. -

- -

- 5.2 With Xitami 2.5b4, phpMyAdmin won't process form fields.

-

- This is not a phpMyAdmin problem but a Xitami known bug: you'll face it - with each script/website that use forms.
- Upgrade or downgrade your Xitami server. -

- -

- 5.3 I have problems dumping tables with Konqueror (phpMyAdmin 2.2.2).

-

- With Konqueror 2.1.1: plain dumps, zip and GZip dumps work ok, except that - the proposed file name for the dump is always 'tbl_dump.php'. Bzip2 dumps - don't seem to work.
- - With Konqueror 2.2.1: plain dumps work; zip dumps are placed into - the user's temporary directory, so they must be moved before closing - Konqueror, or else they disappear. GZip dumps give an error message.
- - Testing needs to be done for Konqueror 2.2.2.
-

- -

- 5.4 I can't use the cookie authentication mode because Internet - Explorer never stores the cookies. -

-

- MS Internet Explorer seems to be really buggy about cookies, at least till - version 6. -

- -

- 5.5 In Internet Explorer 5.0, I get JavaScript errors when browsing my - rows. -

-

- Upgrade to at least Internet Explorer 5.5 SP2.
-

- -

- 5.6 In Internet Explorer 5.0, 5.5 or 6.0, I get an error (like "Page not found") - when trying to modify a row in a table with many columns, or with a text - column -

-

- Your table neither have a primary key nor an unique one, so we must use a - long URL to identify this row. There is a limit on the length of the URL in - those browsers, and this not happen in Netscape, for example. The - workaround is to create a primary or unique key, or use another browser. -
-

- -

- 5.7 I refresh (reload) my browser, and come back to the welcome - page. -

-

- Some browsers support right-clicking into the frame you want to refresh, - just do this in the right frame.
-

- -

- 5.8 With Mozilla 0.9.7 I have problems sending a query modified in the - query box. -

-

- Looks like a Mozilla bug: 0.9.6 was OK. We will keep an eye on future - Mozilla versions.
-

- -

- 5.9 With Mozilla 0.9.? to 1.0 and Netscape 7.0-PR1 I can't type a - whitespace in the SQL-Query edit area: the page scrolls down. -

-

- This is a Mozilla bug (see bug #26882 at - BugZilla).
-

- -

- 5.10 With Netscape 4.75 I get empty rows between each row of data in a - CSV exported file. -

-

- This is a known Netscape 4.75 bug: it adds some line feeds when exporting - data in octet-stream mode. Since we can't detect the specific Netscape - version, we cannot workaround this bug. -

- -

- 5.11 Extended-ASCII characters like German umlauts are displayed - wrong.

- -

Please ensure that you have set your browser's character set to the one of the - language file you have selected on phpMyAdmin's start page. - Alternatively, you can try the auto detection mode that is supported by the - recent versions of the most browsers.

- -

- 5.12 Mac OS X: Safari browser changes special characters to - "?".

- -

This issue has been reported by a OS X user, who adds that Chimera, - Netscape and Mozilla do not have this problem.

- -

- 5.13 With Internet Explorer 5.5 or 6, and HTTP authentication type, - I cannot manage two servers: I log in to the first one, then the other one, - but if I switch back to the first, I have to log in on each operation.

- -

This is a bug in Internet Explorer, other browsers do not behave this way.

- -

- 5.14 Using Opera6, I can manage to get to the authentication, - but nothing happens after that, only a blank screen.

- -

Please upgrade to Opera7 at least.

- -

- 5.15 I have display problems with Safari.

- -

Please upgrade to at least version 1.2.3.

- -

- 5.16 With Internet Explorer, I get "Access is denied" - Javascript errors. Or I cannot make phpMyAdmin work under Windows.

- -

Please check the following points:

- - -

- 5.17 With Firefox, I cannot delete rows of data or drop a database.

-

Many users have confirmed that the Tabbrowser Extensions plugin they - installed in their Firefox is causing the problem.

- -

-5.18 With Konqueror 4.2.x an invalid LIMIT - clause is generated when I browse a table.

-

This happens only when both of these conditions are met: using the - http authentication mode and register_globals being set - to On on the server. It seems to be a browser-specific problem; - meanwhile use the cookie authentication mode.

- -

-5.19 I get JavaScript errors in my browser.

-

Issues have been reported with some combinations of browser extensions. -To troubleshoot, disable all extensions then clear your browser cache -to see if the problem goes away.

- -

Using phpMyAdmin

- -

- 6.1 I can't insert new rows into a table / I can't create a table - - MySQL brings up a SQL-error. -

-

- Examine the SQL error with care. Often the problem is caused by - specifying a wrong column-type.
- Common errors include: -

- -

- Also, look at the syntax chapter in the MySQL manual to confirm that your - syntax is correct. -

- -

- 6.2 When I create a table, I set an index for two - columns and - phpMyAdmin generates only one index with those two columns. -

-

- This is the way to create a multi-columns - index. If you want two indexes, create the first one when creating the - table, save, then display the table properties and click the Index link to - create the other index. -

- -

- 6.3 How can I insert a null value into my table?

-

- Since version 2.2.3, you have a checkbox for each column that can be null. - Before 2.2.3, you had to enter "null", without the quotes, as the - column's value. Since version 2.5.5, you have to use the checkbox to get - a real NULL value, so if you enter "NULL" this means you want - a literal NULL in the column, and not a NULL value (this works in PHP4). -

- -

- 6.4 How can I backup my database or table?

- -

Click on a database or table name in the left frame, the properties will be - displayed. Then on the menu, click "Export", you can dump - the structure, the data, or both. This will generate standard SQL - statements that can be used to recreate your database/table. -

- You will need to choose "Save as file", so that phpMyAdmin can - transmit the resulting dump to your station. Depending on your PHP - configuration, you will see options to compress the dump. See also the - $cfg['ExecTimeLimit'] - configuration variable.

- - For additional help on this subject, look for the word "dump" in - this document.

- -

- 6.5 How can I restore (upload) my database or table using a dump? - How can I run a ".sql" file? -

- -

Click on a database name in the left frame, the properties will be - displayed. Select "Import" from the list - of tabs in the right–hand frame (or "SQL" if your phpMyAdmin - version is previous to 2.7.0). In the "Location of the text file" section, type in - the path to your dump filename, or use the Browse button. Then click Go. -

- With version 2.7.0, the import engine has been re–written, if possible it is suggested - that you upgrade to take advantage of the new features. -

- For additional help on this subject, look for the word "upload" - in this document. -

- -

- 6.6 How can I use the relation table in Query-by-example?

- -

Here is an example with the tables persons, towns and countries, all - located in the database mydb. If you don't have a pma_relation - table, create it as explained in the configuration section. Then create the - example tables:

- -
-CREATE TABLE REL_countries (
-    country_code char(1) NOT NULL default '',
-    description varchar(10) NOT NULL default '',
-    PRIMARY KEY (country_code)
-) TYPE=MyISAM;
-
-INSERT INTO REL_countries VALUES ('C', 'Canada');
-
-CREATE TABLE REL_persons (
-    id tinyint(4) NOT NULL auto_increment,
-    person_name varchar(32) NOT NULL default '',
-    town_code varchar(5) default '0',
-    country_code char(1) NOT NULL default '',
-    PRIMARY KEY (id)
-) TYPE=MyISAM;
-
-INSERT INTO REL_persons VALUES (11, 'Marc', 'S', '');
-INSERT INTO REL_persons VALUES (15, 'Paul', 'S', 'C');
-
-CREATE TABLE REL_towns (
-    town_code varchar(5) NOT NULL default '0',
-    description varchar(30) NOT NULL default '',
-    PRIMARY KEY (town_code)
-) TYPE=MyISAM;
-
-INSERT INTO REL_towns VALUES ('S', 'Sherbrooke');
-INSERT INTO REL_towns VALUES ('M', 'Montréal');
-
- -

To setup appropriate links and display information:

- - - -

Then test like this:

- - - -

- 6.7 How can I use the "display column" feature?

-

- Starting from the previous example, create the pma_table_info as explained - in the configuration section, then browse your persons table, - and move the mouse over a town code or country code. -

- See also FAQ 6.21 for an additional feature that "display column" - enables: drop-down list of possible values. -

- -

- 6.8 How can I produce a PDF schema of my database?

-

- First the configuration variables "relation", - "table_coords" and "pdf_pages" have to be filled in. -

- Then you need to think about your schema layout. Which tables will go on - which pages? -

- - -

- 6.9 phpMyAdmin is changing the type of one of my - columns!

- -

No, it's MySQL that is doing - silent - column type changing.

- -

- 6.10 When creating a privilege, what happens with - underscores in the database name?

- -

If you do not put a backslash before the underscore, this is a wildcard - grant, and the underscore means "any character". So, if the - database name is "john_db", the user would get rights to john1db, - john2db ...

- - If you put a backslash before the underscore, it means that the database - name will have a real underscore.

- -

- 6.11 What is the curious symbol ø in the - statistics pages?

- -

It means "average".

- -

- 6.12 I want to understand some Export options.

- -

Structure:

- - - -

Data:

- - - -

- 6.13 I would like to create a database with a dot - in its name.

- -

This is a bad idea, because in MySQL the syntax "database.table" - is the normal way to reference a database and table name. Worse, MySQL - will usually let you create a database with a dot, but then you cannot - work with it, nor delete it.

- -

- 6.14 How do I set up the - SQL Validator?

- -

- To use SQL Validator, you need PHP with - XML, - PCRE and - PEAR support. - In addition you need a SOAP support, either as a PHP extension or as a PEAR SOAP - module. -

- -

- To install PEAR SOAP module, run "pear install Net_Socket Net_URL - HTTP_Request Mail_Mime Net_DIME SOAP" to get the necessary PEAR modules for - usage. -

- -

- If you use the Validator, you should be aware that any - SQL statement you - submit will be stored anonymously (database/table/column names, - strings, numbers replaced with generic values). The Mimer - SQL - Validator itself, is © 2001 Upright Database Technology. - We utilize it as free SOAP service. -

- -

- 6.15 I want to add a BLOB column and put an index on - it, but MySQL says "BLOB column '...' used in key specification without - a key length".

- -

The right way to do this, is to create the column without any indexes, - then display the table structure and use the "Create an index" - dialog. On this page, you will be able to choose your BLOB column, and - set a size to the index, which is the condition to create an index on - a BLOB column.

- -

- 6.16 How can I simply move in page with plenty - editing fields?

- -

You can use Ctrl+arrows (Option+Arrows in Safari) for moving on most pages - with many editing fields (table structure changes, row editing, etc.).

- -

- 6.17 Transformations: I can't enter my own mimetype! - WTF is this feature then useful for?

- -

Slow down :). Defining mimetypes is of no use, if you can't put transformations - on them. Otherwise you could just put a comment on the column. Because entering - your own mimetype will cause serious syntax checking issues and validation, - this introduces a high-risk false-user-input situation. Instead you have to - initialize mimetypes using functions or empty mimetype definitions.
- Plus, you have a whole overview of available mimetypes. Who knows all those - mimetypes by heart so he/she can enter it at will?

- -

- 6.18 Bookmarks: Where can I store bookmarks? Why - can't I see any bookmarks below the query box? What is this variable for? -

- -

Any query you have executed can be stored as a bookmark on the page where the - results are displayed. You will find a button labeled 'Bookmark this query' - just at the end of the page.
- As soon as you have stored a bookmark, it is related to the database you run - the query on. You can now access a bookmark dropdown on each page, the query - box appears on for that database.

- - Since phpMyAdmin 2.5.0 you are also able to store variables for the bookmarks. - Just use the string /*[VARIABLE]*/ anywhere in your query. Everything - which is put into the value input box on the query box page will - replace the string "/*[VARIABLE]*/" in your stored query. Just be - aware of that you HAVE to create a valid query, otherwise your query won't be - even able to be stored in the database.
- Also remember, that everything else inside the /*[VARIABLE]*/ string - for your query will remain the way it is, but will be stripped of the /**/ - chars. So you can use:

- - /*, [VARIABLE] AS myname */

- - which will be expanded to

- - , VARIABLE as myname

- - in your query, where VARIABLE is the string you entered in the input box. If - an empty string is provided, no replacements are made.

- - A more complex example. Say you have stored this query:

- SELECT Name, Address FROM addresses WHERE 1 /* AND Name LIKE '%[VARIABLE]%' */ -

- - Say, you now enter "phpMyAdmin" as the variable for the stored query, - the full query will be:

- - SELECT Name, Address FROM addresses WHERE 1 AND Name LIKE '%phpMyAdmin%' -

- - You can use multiple occurrences of /*[VARIABLE]*/ in a single query (that is, multiple occurrences of the same variable).
- NOTE THE ABSENCE OF SPACES inside the "/**/" construct. Any - spaces inserted there - will be later also inserted as spaces in your query and may lead to unexpected - results especially when - using the variable expansion inside of a "LIKE ''" expression.
- Your initial query which is going to be stored as a bookmark has to yield at - least one result row so - you can store the bookmark. You may have that to work around using well - positioned "/**/" comments.

- -

- 6.19 How can I create simple LATEX document to - include exported table?

- -

You can simply include table in your LATEX documents, minimal sample - document should look like following one (assuming you have table - exported in file table.tex):

- -
-\documentclass{article} % or any class you want
-\usepackage{longtable}  % for displaying table
-\begin{document}        % start of document
-\include{table}         % including exported table
-\end{document}          % end of document
-
- -

- 6.20 I see a lot of databases which are not mine, and cannot - access them. -

- -

You have one of these global privileges: CREATE - TEMPORARY TABLES, SHOW DATABASES, LOCK TABLES. Those privileges also - enable users to see all the database names. - See this bug report.

- - So if your users do not need those privileges, you can remove them and their - databases list will shorten.

- -

- 6.21 In edit/insert mode, how can I see a list of - possible values for a column, based on some foreign table?

- -

You have to setup appropriate links between the tables, and also - setup the "display column" in the foreign table. See - FAQ - 6.6 for an example. Then, if there are 100 values or less in the - foreign table, a drop-down list of values will be available. - You will see two lists of values, the first list containing the key - and the display column, the second list containing the display column - and the key. The reason for this is to be able to type the first - letter of either the key or the display column.

- - For 100 values or more, a distinct window will appear, to browse foreign - key values and choose one. To change the default limit of 100, see - $cfg['ForeignKeyMaxLimit'].

- -

- 6.22 Bookmarks: Can I execute a default bookmark - automatically when entering Browse mode for a table?

- -

Yes. If a bookmark has the same label as a table name and it's not a public bookmark, it will be executed. -

- -

- 6.23 Export: I heard phpMyAdmin can export Microsoft Excel files?

- -

You can use - CSV for Microsoft Excel, - which works out of the box.
- Since phpMyAdmin 3.4.5 support for direct export to Microsoft Excel - version 97 and newer was dropped. -

- -

- 6.24 Now that phpMyAdmin supports native MySQL 4.1.x column comments, - what happens to my column comments stored in pmadb?

- -

Automatic migration of a table's pmadb-style column comments to the native - ones is done whenever you enter Structure page for this table.

- -

- 6.25 How does BLOB streaming work in phpMyAdmin?

- -

For general information about BLOB streaming on MySQL, visit blobstreaming.org. You need the following components:

- - -

Here are details about configuration and operation:

- -
    -
  1. In config.inc.php your host should be defined with a FQDN (fully qualified domain name) instead of "localhost".
    2. -
  2. Ensure that your target table is under the PBXT storage engine and has a LONGBLOB column (which must be nullable if you want to remove the BLOB reference from it).
    3. -
  3. When you insert or update a row in this table, put a checkmark on the "Upload to BLOB repository" optional choice; otherwise, the upload will be done directly in your LONGBLOB column instead of the repository.
    4. -
  4. Finally when you browse your table, you'll see in your column a link to stream your data, for example "View image". A header containing the correct MIME-type will be sent to your browser; this MIME-type was stored at upload time.
    5. -
- -

- 6.26 How can I select a range of rows?

- -

Click the first row of the range, hold the shift key and click the last row of the range. This works everywhere you see rows, for example in Browse mode or on the Structure page.

- - -

- 6.27 What format strings can I use?

- -

- In all places where phpMyAdmin accepts format strings, you can use - @VARIABLE@ expansion and - strftime format strings. The - expanded variables depend on a context (for example, if you haven't chosen a - table, you can not get the table name), but the following variables can be used: -

-
-
@HTTP_HOST@
-
HTTP host that runs phpMyAdmin
-
@SERVER@
-
MySQL server name
-
@VERBOSE@
-
Verbose MySQL server name as defined in server configuration
-
@VSERVER@
-
Verbose MySQL server name if set, otherwise normal
-
@DATABASE@
-
Currently opened database
-
@TABLE@
-
Currently opened table
-
@COLUMNS@
-
Columns of the currently opened table
-
@PHPMYADMIN@
-
phpMyAdmin with version
-
- -

- 6.28 How can I easily edit relational schema for export?

- -

- By clicking on the button 'toggle scratchboard' on the page - where you edit x/y coordinates of those elements you can activate a - scratchboard where all your elements are placed. By clicking on an - element, you can move them around in the pre-defined area and the x/y - coordinates will get updated dynamically. Likewise, when entering a - new position directly into the input field, the new position in the - scratchboard changes after your cursor leaves the input field. -

-

- You have to click on the 'OK'-button below the tables to save the new - positions. If you want to place a new element, first add it to the - table of elements and then you can drag the new element around. -

-

- By changing the paper size and the orientation you can change the size - of the scratchboard as well. You can do so by just changing the - dropdown field below, and the scratchboard will resize automatically, - without interfering with the current placement of the elements. -

-

- If ever an element gets out of range you can either enlarge the paper - size or click on the 'reset' button to place all elements below each - other. -

- -

- 6.29 Why can't I get a chart from my query result table?

- -

Not every table can be put to the chart. Only tables with one, two or three columns can be visualised as a chart. Moreover the table must be in a special format for chart script to understand it. Currently supported formats can be found in the wiki.

- -

- 6.30 Import: How can I import ESRI Shapefiles

- -

- An ESRI Shapefile is actually a set of several files, where .shp file contains - geometry data and .dbf file contains data related to those geometry data. - To read data from .dbf file you need to have PHP compiled with the dBase extension - (--enable-dbase). Otherwise only geometry data will be imported. -

- -

To upload these set of files you can use either of the following methods:

- - -

- 6.31 How do I create a relation in designer?

- -

To select relation, click:
- [relation icon]
- The display column is shown in pink. To set/unset a column as the display column, click the "Choose column to display" icon, then click on the appropriate column name.

- -

- 6.32 How can I use the zoom search feature?

- -

The Zoom search feature is an alternative to table search feature. It allows you to explore - a table by representing its data in a scatter plot. You can locate this feature by selecting - a table and clicking the 'Search' tab. One of the sub-tabs in the 'Table Search' page is - 'Zoom Search'.

- - Consider the table REL_persons in - FAQ 6.6 for an example. To use zoom search, two columns need to be selected, - for example, id and town_code. The id values will be represented on one axis and town_code - values on the other axis. Each row will be represented as a point in a scatter plot based - on its id and town_code. You can include two additional search criteria apart from the two - fields to display.

- - You can choose which field should be displayed as label for each point. If a display - column has been set for the table (see FAQ 6.7), it is taken as the label unless you specify otherwise. - You can also select the maximum number of rows you want to be displayed in the plot by - specifing it in the 'Max rows to plot' field. Once you have decided over your criteria, - click 'Go' to display the plot.

- - After the plot is generated, you can use the mousewheel to zoom in and out of the plot. - In addition, panning feature is enabled to navigate through the plot. You can zoom-in to - a certail level of detail and use panning to locate your area of interest. Clicking on a - point opens a dialogue box, displaying field values of the data row represented by the point. - You can edit the values if required and click on submit to issue an update query. Basic - instructions on how to use can be viewed by clicking the 'How to use?' link located just above - the plot.

- -

phpMyAdmin project

- -

- 7.1 I have found a bug. How do I inform developers?

- -

Our Bug Tracker is located at - http://sf.net/projects/phpmyadmin/ - under the Bugs section.

- - But please first discuss your bug with other users:
- - https://sourceforge.net/projects/phpmyadmin/forums. -

- -

- 7.2 I want to translate the messages to a new language or upgrade an - existing language, where do I start?

- -

Translations are very welcome and all you need to have are the language skills. - The easiest way is to use our online - translation service. - You can check out all the possibilities to translate in the - translate section on our website. -

- -

- 7.3 I would like to help out with the development of - phpMyAdmin. How should I proceed?

- -

We welcome every contribution to the development of phpMyAdmin. - You can check out all the possibilities to contribute in the - contribute section on our website. -

- -

Security

- -

- 8.1 Where can I get information about the security alerts issued for phpMyAdmin?

- -

Please refer to - http://www.phpmyadmin.net/home_page/security.php -

- -

- 8.2 How can I protect phpMyAdmin against brute force attacks?

- -

If you use Apache web server, phpMyAdmin exports information about - authentication to the Apache environment and it can be used in Apache logs. - Currently there are two variables available: -

-
-
userID
-
User name of currently active user (he does not have to be logged - in).
-
userStatus
-
Status of currently active user, one of ok (user is - logged in), mysql-denied (MySQL denied user login), - allow-denied (user denied by allow/deny rules), - root-denied (root is denied in configuration), - empty-denied (empty password is denied).
-
-

- LogFormat directive for Apache can look like following: -

-
-LogFormat "%h %l %u %t \"%r\" %>s %b \
-\"%{Referer}i\" \"%{User-Agent}i\" %{userID}n %{userStatus}n"   pma_combined
-
-

- You can then use any log analyzing tools to detect possible break-in - attempts. -

- -

Synchronization

-

- 9.1 How can I synchronize two databases/tables in phpMyAdmin?

- -

You can now synchronize databases/tables in phpMyAdmin using the Synchronize feature. -It allows you to connect to local as well as remote servers. This requires you to enter -server host name, username, password, port and the name of the database. Therefore you can -now synchronize your databases placed on the same server or some remote server. -

- -

-This feature is helpful for developers who need to replicate their -database’s structure as well as data. Moreover, this feature not only -helps replication but also facilitates the user to keep his/her database -in sync with another database. Other than the full database, certain -tables of the databases can also be synchronized. -

- -

-You need to fill in the host name of the server, the username and -password of an user account already there in MySQL. Port is by default -populated with 3306 (MySQL default port). Then the name of the database -should be mentioned at the end. All the information other than the port -needs to be filled explicitly for the source as well as target servers. -

- -

-After successfully passing through the authentication phase, the source and -target database table names will be displayed. It will be a tabular -representation. -

- -

-On the left, are listed the source database table names. Some of the -names have a + plus sign preceding them. This shows that these tables -are only present in source database and they need to be added to the -target database in order to synchronize the target database. The tables -whose names are not preceded by a + sign are already present in the -target database. -

- -

-On the right, are listed the target database table names. There are few -table names that have (not present) appended after their names. This -means that these tables are to be created in target database in order to -synchronize target database with source database. Some table names -have a - minus sign preceding them. This shows that these tables are -only present in target database and they will remain unchanged in the -target database. The column in the middle shows the difference between -the source and target corresponding tables. -

- -

-The difference is depicted by the red and green buttons with S and D -letters, indicating that either Structure or Data are not up to date. By -clicking on them, they will turn grey, what means that they will be synchronized. -

- -

- 9.2 Are there problems with data synchronizing large - tables?

- -

-Yes. This aspect of synchronization is currently limited to small tables, and they -must have a primary key. -

- - -

Developers Information

- -

phpMyAdmin is Open Source, so you're invited to contribute to it. Many - great features have been written by other people and you too can help to - make phpMyAdmin a useful tool.

- -

You can check out all the possibilities to contribute in the - contribute section on our website. -

- - - -
-Copyright (C) 1998-2000 Tobias Ratschiller <tobias_at_ratschiller.com>
-Copyright (C) 2001-2012 Marc Delisle <marc_at_infomarc.info>
-                        Olivier Müller <om_at_omnis.ch>
-                        Robin Johnson <robbat2_at_users.sourceforge.net>
-                        Alexander M. Turek <me_at_derrabus.de>
-                        Michal Čihař <michal_at_cihar.com>
-                        Garvin Hicking <me_at_supergarv.de>
-                        Michael Keck <mkkeck_at_users.sourceforge.net>
-                        Sebastian Mendel <cybot_tm_at_users.sourceforge.net>
-                        [check credits for more details]
-
- -

-This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License version 2, -as published by the Free Software Foundation. -

- -

-This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -

- -

-You should have received a copy of the GNU General Public License -along with this program. If not, see http://www.gnu.org/licenses/. -

- - -

Credits

- -

Credits, in chronological order

- - - -

-And also to the following people who have contributed minor changes, -enhancements, bugfixes or support for a new language since version 2.1.0: -

- -

-Bora Alioglu, Ricardo ?, Sven-Erik Andersen, Alessandro Astarita, -Péter Bakondy, Borges Botelho, Olivier Bussier, Neil Darlow, -Mats Engstrom, Ian Davidson, Laurent Dhima, Kristof Hamann, Thomas Kläger, -Lubos Klokner, Martin Marconcini, Girish Nair, David Nordenberg, Andreas Pauley, -Bernard M. Piller, Laurent Haas, "Sakamoto", Yuval Sarna, -www.securereality.com.au, Alexis Soulard, Alvar Soome, Siu Sun, Peter Svec, -Michael Tacelosky, Rachim Tamsjadi, Kositer Uros, -Luís V., Martijn W. van der Lee, -Algis Vainauskas, Daniel Villanueva, Vinay, Ignacio Vazquez-Abrams, Chee Wai, -Jakub Wilk, Thomas Michael Winningham, Vilius Zigmantas, "Manuzhai". -

- - -

Original Credits of Version 2.1.0

- -

- This work is based on Peter Kuppelwieser's MySQL-Webadmin. It was his idea - to create a web-based interface to MySQL using PHP3. Although I have not - used any of his source-code, there are some concepts I've borrowed from - him. phpMyAdmin was created because Peter told me he wasn't going to - further develop his (great) tool. -

-

- Thanks go to -

- -

- The following people have contributed minor changes, enhancements, bugfixes - or support for a new language: -

-

- Jim Kraai, Jordi Bruguera, Miquel Obrador, Geert Lund, Thomas Kleemann, - Alexander Leidinger, Kiko Albiol, Daniel C. Chao, Pavel Piankov, - Sascha Kettler, Joe Pruett, Renato Lins, Mark Kronsbein, Jannis Hermanns, - G. Wieggers. -

-

- And thanks to everyone else who sent me email with suggestions, bug-reports - and or just some feedback. -

- -

Glossary

- -

From Wikipedia, the free encyclopedia

- - -
- - - - - diff --git a/phpMyAdmin/Documentation.txt b/phpMyAdmin/Documentation.txt deleted file mode 100644 index 481d5d8..0000000 --- a/phpMyAdmin/Documentation.txt +++ /dev/null @@ -1,3797 +0,0 @@ -phpMyAdmin 3.5.7 Documentation - - * Top - * Requirements - * Introduction - * Installation - * Setup script - * Configuration - * Transformations - * FAQ - * Developers - * Copyright - * Credits - * Glossary - - * phpMyAdmin homepage - * SourceForge phpMyAdmin project page - * Official phpMyAdmin wiki - * Git repositories on Github - * Local documents: - + Version history: ChangeLog - + License: LICENSE - -Requirements - - * PHP - + You need PHP 5.2.0 or newer, with session support (see FAQ 1.31) , the - Standard PHP Library (SPL) extension and JSON support. - + To support uploading of ZIP files, you need the PHP zip extension. - + For proper support of multibyte strings (eg. UTF-8, which is currently - the default), you should install the mbstring and ctype extensions. - + You need GD2 support in PHP to display inline thumbnails of JPEGs - ("image/jpeg: inline") with their original aspect ratio - + When using the "cookie" authentication method, the mcrypt extension is - strongly suggested for most users and is required for 64?bit machines. - Not using mcrypt will cause phpMyAdmin to load pages significantly - slower. - + To support upload progress bars, see FAQ 2.9. - + To support BLOB streaming, see PHP and MySQL requirements in FAQ 6.25. - + To support XML and Open Document Spreadsheet importing, you need PHP - 5.2.17 or newer and the libxml extension. - * MySQL 5.0 or newer (details); - * Web browser with cookies enabled. - -Introduction - -phpMyAdmin can manage a whole MySQL server (needs a super-user) as well as a -single database. To accomplish the latter you'll need a properly set up MySQL -user who can read/write only the desired database. It's up to you to look up -the appropriate part in the MySQL manual. - -Currently phpMyAdmin can: - - * browse and drop databases, tables, views, columns and indexes - * create, copy, drop, rename and alter databases, tables, columns and indexes - * maintenance server, databases and tables, with proposals on server - configuration - * execute, edit and bookmark any SQL-statement, even batch-queries - * load text files into tables - * create^1 and read dumps of tables - * export^1 data to various formats: CSV, XML, PDF, ISO/IEC 26300 - - OpenDocument Text and Spreadsheet, Word, and L^AT[E]X formats - * import data and MySQL structures from OpenDocument spreadsheets, as well as - XML, CSV, and SQL files - * administer multiple servers - * manage MySQL users and privileges - * check referential integrity in MyISAM tables - * using Query-by-example (QBE), create complex queries automatically - connecting required tables - * create PDF graphics of your Database layout - * search globally in a database or a subset of it - * transform stored data into any format using a set of predefined functions, - like displaying BLOB-data as image or download-link - * track changes on databases, tables and views - * support InnoDB tables and foreign keys (see FAQ 3.6) - * support mysqli, the improved MySQL extension (see FAQ 1.17) - * create, edit, call, export and drop stored procedures and functions - * create, edit, export and drop events and triggers - * communicate in 62 different languages - * synchronize two databases residing on the same as well as remote servers - (see FAQ 9.1) - -A word about users: - -Many people have difficulty understanding the concept of user management with -regards to phpMyAdmin. When a user logs in to phpMyAdmin, that username and -password are passed directly to MySQL. phpMyAdmin does no account management on -its own (other than allowing one to manipulate the MySQL user account -information); all users must be valid MySQL users. - -^1) phpMyAdmin can compress (Zip, GZip -RFC 1952- or Bzip2 formats) dumps and -CSV exports if you use PHP with Zlib support (--with-zlib) and/or Bzip2 support -(--with-bz2). Proper support may also need changes in php.ini. - -Installation - - 1. Quick Install - 2. Setup script usage - 3. phpMyAdmin configuration storage - 4. Upgrading from an older version - 5. Using authentication modes - -phpMyAdmin does not apply any special security methods to the MySQL database -server. It is still the system administrator's job to grant permissions on the -MySQL databases properly. phpMyAdmin's "Privileges" page can be used for this. - -Warning for Mac users: -if you are on a Mac OS version before OS X, StuffIt unstuffs with Mac formats. -So you'll have to resave as in BBEdit to Unix style ALL phpMyAdmin scripts -before uploading them to your server, as PHP seems not to like Mac-style end of -lines character ("\r"). - -Quick Install - - 1. Choose an appropriate distribution kit from the phpmyadmin.net Downloads - page. Some kits contain only the English messages, others contain all - languages in UTF-8 format (this should be fine in most situations), others - contain all languages and all character sets. We'll assume you chose a kit - whose name looks like phpMyAdmin-x.x.x-all-languages.tar.gz. - 2. Untar or unzip the distribution (be sure to unzip the subdirectories): tar - -xzvf phpMyAdmin_x.x.x-all-languages.tar.gz in your webserver's document - root. If you don't have direct access to your document root, put the files - in a directory on your local machine, and, after step 4, transfer the - directory on your web server using, for example, ftp. - 3. Ensure that all the scripts have the appropriate owner (if PHP is running - in safe mode, having some scripts with an owner different from the owner of - other scripts will be a problem). See FAQ 4.2 and FAQ 1.26 for suggestions. - 4. Now you must configure your installation. There are two methods that can be - used. Traditionally, users have hand-edited a copy of config.inc.php, but - now a wizard-style setup script is provided for those who prefer a - graphical installation. Creating a config.inc.php is still a quick way to - get started and needed for some advanced features. - + To manually create the file, simply use your text editor to create the - file config.inc.php (you can copy config.sample.inc.php to get minimal - configuration file) in the main (top-level) phpMyAdmin directory (the - one that contains index.php). phpMyAdmin first loads libraries/ - config.default.php and then overrides those values with anything found - in config.inc.php. If the default value is okay for a particular - setting, there is no need to include it in config.inc.php. You'll need - a few directives to get going, a simple configuration may look like - this: - - - - Or, if you prefer to not be prompted every time you log in: - - - - For a full explanation of possible configuration values, see the - Configuration Section of this document. - + Instead of manually editing config.inc.php, you can use the Setup - Script. First you must manually create a folder config in the - phpMyAdmin directory. This is a security measure. On a Linux/Unix - system you can use the following commands: - - cd phpMyAdmin - mkdir config # create directory for saving - chmod o+rw config # give it world writable permissions - - And to edit an existing configuration, copy it over first: - - cp config.inc.php config/ # copy current configuration for editing - chmod o+w config/config.inc.php # give it world writable permissions - - On other platforms, simply create the folder and ensure that your web - server has read and write access to it. FAQ 1.26 can help with this. - - Next, open setup/ in your browser. Note that changes are not saved to - disk until explicitly choose Save from the Configuration area of the - screen. Normally the script saves the new config.inc.php to the config/ - directory, but if the webserver does not have the proper permissions - you may see the error "Cannot load or save configuration." Ensure that - the config/ directory exists and has the proper permissions - or use - the Download link to save the config file locally and upload (via FTP - or some similar means) to the proper location. - - Once the file has been saved, it must be moved out of the config/ - directory and the permissions must be reset, again as a security - measure: - - mv config/config.inc.php . # move file to current directory - chmod o-rw config.inc.php # remove world read and write permissions - rm -rf config # remove not needed directory - - Now the file is ready to be used. You can choose to review or edit the - file with your favorite editor, if you prefer to set some advanced - options which the setup script does not provide. - 5. If you are using the auth_type "config", it is suggested that you protect - the phpMyAdmin installation directory because using config does not require - a user to enter a password to access the phpMyAdmin installation. Use of an - alternate authentication method is recommended, for example with HTTP?AUTH - in a .htaccess file or switch to using auth_type cookie or http. See the - multi?user sub?section of this FAQ for additional information, especially - FAQ 4.4. - 6. Open the main phpMyAdmin directory in your browser. phpMyAdmin should now - display a welcome screen and your databases, or a login dialog if using - HTTP or cookie authentication mode. - 7. You should deny access to the ./libraries and ./setup/lib subfolders in - your webserver configuration. For Apache you can use supplied .htaccess - file in that folder, for other webservers, you should configure this - yourself. Such configuration prevents from possible path exposure and cross - side scripting vulnerabilities that might happen to be found in that code. - 8. It is generally good idea to protect public phpMyAdmin installation against - access by robots as they usually can not do anything good there. You can do - this using robots.txt file in root of your webserver or limit access by web - server configuration, see FAQ 1.42. - -phpMyAdmin configuration storage - -For a whole set of new features (bookmarks, comments, SQL-history, tracking -mechanism, PDF-generation, column contents transformation, etc.) you need to -create a set of special tables. Those tables can be located in your own -database, or in a central database for a multi-user installation (this database -would then be accessed by the controluser, so no other user should have rights -to it). - -Please look at your ./examples/ directory, where you should find a file called -create_tables.sql. (If you are using a Windows server, pay special attention to -FAQ 1.23). - -If you already had this infrastructure and upgraded to MySQL 4.1.2 or newer, -please use ./examples/upgrade_tables_mysql_4_1_2+.sql and then create new -tables by importing ./examples/create_tables.sql. - -You can use your phpMyAdmin to create the tables for you. Please be aware that -you may need special (administrator) privileges to create the database and -tables, and that the script may need some tuning, depending on the database -name. - -After having imported the ./examples/create_tables.sql file, you should specify -the table names in your ./config.inc.php file. The directives used for that can -be found in the Configuration section. You will also need to have a controluser -with the proper rights to those tables (see section Using authentication modes -below). - -Upgrading from an older version - -Simply copy ./config.inc.php from your previous installation into the newly -unpacked one. Configuration files from old versions may require some tweaking -as some options have been changed or removed; in particular, the definition of -$cfg['AttributeTypes'] has changed so you better remove it from your file and -just use the default one. For compatibility with PHP 6, remove a -set_magic_quotes_runtime(0); statement that you might find near the end of your -configuration file. - -You should not copy libraries/config.default.php over config.inc.php because -the default configuration file is version-specific. - -If you have upgraded your MySQL server from a version previous to 4.1.2 to -version 5.x or newer and if you use the phpMyAdmin configuration storage, you -should run the SQL script found in examples/upgrade_tables_mysql_4_1_2+.sql. - -Using authentication modes - - * HTTP and cookie authentication modes are recommended in a multi-user - environment where you want to give users access to their own database and - don't want them to play around with others. - Nevertheless be aware that MS Internet Explorer seems to be really buggy - about cookies, at least till version 6. - Even in a single-user environment, you might prefer to use HTTP or cookie - mode so that your user/password pair are not in clear in the configuration - file. - * HTTP and cookie authentication modes are more secure: the MySQL login - information does not need to be set in the phpMyAdmin configuration file - (except possibly for the controluser). - However, keep in mind that the password travels in plain text, unless you - are using the HTTPS protocol. - In cookie mode, the password is stored, encrypted with the blowfish - algorithm, in a temporary cookie. - * Note: this section is only applicable if your MySQL server is running with - --skip-show-database. - - For 'HTTP' and 'cookie' modes, phpMyAdmin needs a controluser that has only - the SELECT privilege on the `mysql`.`user` (all columns except `Password`), - `mysql`.`db` (all columns), `mysql`.`host` (all columns) and `mysql`. - `tables_priv` (all columns except `Grantor` and `Timestamp`) tables. - You must specify the details for the controluser in the config.inc.php file - under the $cfg['Servers'][$i]['controluser'] and $cfg['Servers'][$i] - ['controlpass'] settings. - The following example assumes you want to use pma as the controluser and - pmapass as the controlpass, but this is only an example: use something else - in your file! Input these statements from the phpMyAdmin SQL Query window - or mysql command?line client. - Of course you have to replace localhost with the webserver's host if it's - not the same as the MySQL server's one. - - GRANT USAGE ON mysql.* TO 'pma'@'localhost' IDENTIFIED BY 'pmapass'; - GRANT SELECT ( - Host, User, Select_priv, Insert_priv, Update_priv, Delete_priv, - Create_priv, Drop_priv, Reload_priv, Shutdown_priv, Process_priv, - File_priv, Grant_priv, References_priv, Index_priv, Alter_priv, - Show_db_priv, Super_priv, Create_tmp_table_priv, Lock_tables_priv, - Execute_priv, Repl_slave_priv, Repl_client_priv - ) ON mysql.user TO 'pma'@'localhost'; - GRANT SELECT ON mysql.db TO 'pma'@'localhost'; - GRANT SELECT ON mysql.host TO 'pma'@'localhost'; - GRANT SELECT (Host, Db, User, Table_name, Table_priv, Column_priv) - ON mysql.tables_priv TO 'pma'@'localhost'; - - If you want to use the many new relation and bookmark features: - - GRANT SELECT, INSERT, UPDATE, DELETE ON .* TO 'pma'@'localhost'; - - (this of course requires that your phpMyAdmin configuration storage be set - up). - * Then each of the true users should be granted a set of privileges on a set - of particular databases. Normally you shouldn't give global privileges to - an ordinary user, unless you understand the impact of those privileges (for - example, you are creating a superuser). - For example, to grant the user real_user with all privileges on the - database user_base: - - GRANT ALL PRIVILEGES ON user_base.* TO 'real_user'@localhost IDENTIFIED BY 'real_password'; - - What the user may now do is controlled entirely by the MySQL user - management system. - With HTTP or cookie authentication mode, you don't need to fill the user/ - password fields inside the $cfg['Servers'] array. - -'HTTP' authentication mode - - * Uses HTTP Basic authentication method and allows you to log in as any valid - MySQL user. - * Is supported with most PHP configurations. For IIS (ISAPI) support using - CGI PHP see FAQ 1.32, for using with Apache CGI see FAQ 1.35. - * See also FAQ 4.4 about not using the .htaccess mechanism along with 'HTTP' - authentication mode. - -'cookie' authentication mode - - * You can use this method as a replacement for the HTTP authentication (for - example, if you're running IIS). - * Obviously, the user must enable cookies in the browser, but this is now a - requirement for all authentication modes. - * With this mode, the user can truly log out of phpMyAdmin and log in back - with the same username. - * If you want to log in to arbitrary server see $cfg['AllowArbitraryServer'] - directive. - * As mentioned in the requirements section, having the mcrypt extension will - speed up access considerably, but is not required. - -'signon' authentication mode - - * This mode is a convenient way of using credentials from another application - to authenticate to phpMyAdmin. - * The other application has to store login information into session data. - * More details in the auth_type section. - -'config' authentication mode - - * This mode is the less secure one because it requires you to fill the $cfg - ['Servers'][$i]['user'] and $cfg['Servers'][$i]['password'] fields (and as - a result, anyone who can read your config.inc.php can discover your - username and password). - But you don't need to setup a "controluser" here: using the $cfg['Servers'] - [$i]['only_db'] might be enough. - * In the ISP FAQ section, there is an entry explaining how to protect your - configuration file. - * For additional security in this mode, you may wish to consider the Host - authentication $cfg['Servers'][$i]['AllowDeny']['order'] and $cfg - ['Servers'][$i]['AllowDeny']['rules'] configuration directives. - * Unlike cookie and http, does not require a user to log in when first - loading the phpMyAdmin site. This is by design but could allow any user to - access your installation. Use of some restriction method is suggested, - perhaps a .htaccess file with the HTTP-AUTH directive or disallowing - incoming HTTP requests at one?s router or firewall will suffice (both of - which are beyond the scope of this manual but easily searchable with - Google). - -Swekey authentication - -The Swekey is a low cost authentication USB key that can be used in web -applications. - -When Swekey authentication is activated, phpMyAdmin requires the users's Swekey -to be plugged before entering the login page (currently supported for cookie -authentication mode only). Swekey Authentication is disabled by default. - -To enable it, add the following line to config.inc.php: - -$cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey.conf'; - -You then have to create the swekey.conf file that will associate each user with -their Swekey Id. It is important to place this file outside of your web -server's document root (in the example, it is located in /etc). A self -documented sample file is provided in the examples directory. Feel free to use -it with your own users' information. - -If you want to purchase a Swekey please visit http://phpmyadmin.net/auth_key -since this link provides funding for phpMyAdmin. - -Configuration - -Warning for Mac users: PHP does not seem to like Mac end of lines character ("\ -r"). So ensure you choose the option that allows to use the *nix end of line -character ("\n") in your text editor before saving a script you have modified. - -Configuration note: Almost all configurable data is placed in config.inc.php. -If this file does not exist, please refer to the Quick install section to -create one. This file only needs to contain the parameters you want to change -from their corresponding default value in libraries/config.default.php. - -The parameters which relate to design (like colors) are placed in themes/ -themename/layout.inc.php. You might also want to create config.footer.inc.php -and config.header.inc.php files to add your site specific code to be included -on start and end of each page. - -$cfg['PmaAbsoluteUri'] string - Sets here the complete URL (with full path) to your phpMyAdmin - installation's directory. E.g. http://www.your_web.net/ - path_to_your_phpMyAdmin_directory/. Note also that the URL on some web - servers are case?sensitive. Don?t forget the trailing slash at the end. - - Starting with version 2.3.0, it is advisable to try leaving this blank. In - most cases phpMyAdmin automatically detects the proper setting. Users of - port forwarding will need to set PmaAbsoluteUri (more info). A good test is - to browse a table, edit a row and save it. There should be an error message - if phpMyAdmin is having trouble auto?detecting the correct value. If you - get an error that this must be set or if the autodetect code fails to - detect your path, please post a bug report on our bug tracker so we can - improve the code. -$cfg['PmaNoRelation_DisableWarning'] boolean - Starting with version 2.3.0 phpMyAdmin offers a lot of features to work - with master / foreign ? tables (see $cfg['Servers'][$i]['pmadb']). - If you tried to set this up and it does not work for you, have a look on - the "Structure" page of one database where you would like to use it. You - will find a link that will analyze why those features have been disabled. - If you do not want to use those features set this variable to TRUE to stop - this message from appearing. -$cfg['SuhosinDisableWarning'] boolean - A warning is displayed on the main page if Suhosin is detected. You can set - this parameter to TRUE to stop this message from appearing. -$cfg['McryptDisableWarning'] boolean - Disable the default warning that is displayed if mcrypt is missing for - cookie authentication. You can set this parameter to TRUE to stop this - message from appearing. -$cfg['TranslationWarningThreshold'] integer - Show warning about incomplete translations on certain threshold. -$cfg['AllowThirdPartyFraming'] boolean - Setting this to true allows a page located on a different domain to call - phpMyAdmin inside a frame, and is a potential security hole allowing - cross-frame scripting attacks. -$cfg['blowfish_secret'] string - The "cookie" auth_type uses blowfish algorithm to encrypt the password. - If you are using the "cookie" auth_type, enter here a random passphrase of - your choice. It will be used internally by the blowfish algorithm: you - won?t be prompted for this passphrase. There is no maximum length for this - secret. - - Since version 3.1.0 phpMyAdmin can generate this on the fly, but it makes a - bit weaker security as this generated secret is stored in session and - furthermore it makes impossible to recall user name from cookie. -$cfg['Servers'] array - Since version 1.4.2, phpMyAdmin supports the administration of multiple - MySQL servers. Therefore, a $cfg['Servers']-array has been added which - contains the login information for the different servers. The first $cfg - ['Servers'][$i]['host'] contains the hostname of the first server, the - second $cfg['Servers'][$i]['host'] the hostname of the second server, etc. - In ./libraries/config.default.php, there is only one section for server - definition, however you can put as many as you need in ./config.inc.php, - copy that block or needed parts (you don't have to define all settings, - just those you need to change). -$cfg['Servers'][$i]['host'] string - The hostname or IP address of your $i-th MySQL-server. E.g. localhost. -$cfg['Servers'][$i]['port'] string - The port-number of your $i-th MySQL-server. Default is 3306 (leave blank). - If you use "localhost" as the hostname, MySQL ignores this port number and - connects with the socket, so if you want to connect to a port different - from the default port, use "127.0.0.1" or the real hostname in $cfg - ['Servers'][$i]['host']. -$cfg['Servers'][$i]['socket'] string - The path to the socket to use. Leave blank for default. - To determine the correct socket, check your MySQL configuration or, using - the mysql command?line client, issue the status command. Among the - resulting information displayed will be the socket used. -$cfg['Servers'][$i]['ssl'] boolean - Whether to enable SSL for connection to MySQL server. -$cfg['Servers'][$i]['connect_type'] string - What type connection to use with the MySQL server. Your options are - 'socket' and 'tcp'. It defaults to 'tcp' as that is nearly guaranteed to be - available on all MySQL servers, while sockets are not supported on some - platforms. - - To use the socket mode, your MySQL server must be on the same machine as - the Web server. -$cfg['Servers'][$i]['extension'] string - What php MySQL extension to use for the connection. Valid options are: - - mysql : The classic MySQL extension. - - mysqli : The improved MySQL extension. This extension became available with - PHP 5.0.0 and is the recommended way to connect to a server running MySQL - 4.1.x or newer. -$cfg['Servers'][$i]['compress'] boolean - Whether to use a compressed protocol for the MySQL server connection or not - (experimental). -$cfg['Servers'][$i]['controlhost'] string - Permits to use an alternate host to hold the configuration storage data. -$cfg['Servers'][$i]['controluser'] string - $cfg['Servers'][$i]['controlpass'] string - This special account is used for 2 distinct purposes: to make possible all - relational features (see $cfg['Servers'][$i]['pmadb']) and, for a MySQL - server running with --skip-show-database, to enable a multi-user - installation (HTTP or cookie authentication mode). - - When using HTTP or cookie authentication modes (or 'config' authentication - mode since phpMyAdmin 2.2.1), you need to supply the details of a MySQL - account that has SELECT privilege on the mysql.user (all columns except - "Password"), mysql.db (all columns) and mysql.tables_priv (all columns - except "Grantor" and "Timestamp") tables. This account is used to check - what databases the user will see at login. - Please see the install section on "Using authentication modes" for more - information. - - In phpMyAdmin versions before 2.2.5, those were called "stduser/stdpass". -$cfg['Servers'][$i]['auth_type'] string ['HTTP'|'http'|'cookie'|'config'| - 'signon'] - Whether config or cookie or HTTP or signon authentication should be used - for this server. - + 'config' authentication ($auth_type = 'config') is the plain old way: - username and password are stored in config.inc.php. - + 'cookie' authentication mode ($auth_type = 'cookie') as introduced in - 2.2.3 allows you to log in as any valid MySQL user with the help of - cookies. Username and password are stored in cookies during the session - and password is deleted when it ends. This can also allow you to log in - in arbitrary server if $cfg['AllowArbitraryServer'] enabled. - + 'HTTP' authentication (was called 'advanced' in previous versions and - can be written also as 'http') ($auth_type = 'HTTP') as introduced in - 1.3.0 allows you to log in as any valid MySQL user via HTTP-Auth. - + 'signon' authentication mode ($auth_type = 'signon') as introduced in - 2.10.0 allows you to log in from prepared PHP session data or using - supplied PHP script. This is useful for implementing single signon from - another application. Sample way how to seed session is in signon - example: examples/signon.php. There is also alternative example using - OpenID - examples/openid.php and example for scripts based solution - - examples/signon-script.php. You need to configure session name or - script to be executed and signon URL to use this authentication method. - Please see the install section on "Using authentication modes" for more - information. -$cfg['Servers'][$i]['auth_http_realm'] string - When using auth_type = 'HTTP', this field allows to define a custom HTTP - Basic Auth Realm which will be displayed to the user. If not explicitly - specified in your configuration, a string combined of "phpMyAdmin " and - either $cfg['Servers'][$i]['verbose'] or $cfg['Servers'][$i]['host'] will - be used. -$cfg['Servers'][$i]['auth_swekey_config'] string - The name of the file containing Swekey ids and login names for hardware - authentication. Leave empty to deactivate this feature. -$cfg['Servers'][$i]['user'] string - $cfg['Servers'][$i]['password'] string - When using auth_type = 'config', this is the user/password-pair which - phpMyAdmin will use to connect to the MySQL server. This user/password pair - is not needed when HTTP or cookie authentication is used and should be - empty. -$cfg['Servers'][$i]['nopassword'] boolean - Allow attempt to log in without password when a login with password fails. - This can be used together with http authentication, when authentication is - done some other way and phpMyAdmin gets user name from auth and uses empty - password for connecting to MySQL. Password login is still tried first, but - as fallback, no password method is tried. -$cfg['Servers'][$i]['only_db'] string or array - If set to a (an array of) database name(s), only this (these) database(s) - will be shown to the user. Since phpMyAdmin 2.2.1, this/these database(s) - name(s) may contain MySQL wildcards characters ("_" and "%"): if you want - to use literal instances of these characters, escape them (I.E. use 'my\ - _db' and not 'my_db'). - This setting is an efficient way to lower the server load since the latter - does not need to send MySQL requests to build the available database list. - But it does not replace the privileges rules of the MySQL database server. - If set, it just means only these databases will be displayed but not that - all other databases can't be used. - - An example of using more that one database: $cfg['Servers'][$i]['only_db'] - = array('db1', 'db2'); - - As of phpMyAdmin 2.5.5 the order inside the array is used for sorting the - databases in the left frame, so that you can individually arrange your - databases. - If you want to have certain databases at the top, but don't care about the - others, you do not need to specify all other databases. Use: $cfg - ['Servers'][$i]['only_db'] = array('db3', 'db4', '*'); instead to tell - phpMyAdmin that it should display db3 and db4 on top, and the rest in - alphabetic order. -$cfg['Servers'][$i]['hide_db'] string - Regular expression for hiding some databases from unprivileged users. This - only hides them from listing, but a user is still able to access them - (using, for example, the SQL query area). To limit access, use the MySQL - privilege system. - - For example, to hide all databases starting with the letter "a", use - - $cfg['Servers'][$i]['hide_db'] = '^a'; - - and to hide both "db1" and "db2" use - - $cfg['Servers'][$i]['hide_db'] = '^(db1|db2)$'; - - More information on regular expressions can be found in the PCRE pattern - syntax portion of the PHP reference manual. -$cfg['Servers'][$i]['verbose'] string - Only useful when using phpMyAdmin with multiple server entries. If set, - this string will be displayed instead of the hostname in the pull-down menu - on the main page. This can be useful if you want to show only certain - databases on your system, for example. For HTTP auth, all non-US-ASCII - characters will be stripped. -$cfg['Servers'][$i]['pmadb'] string - The name of the database containing the phpMyAdmin configuration storage. - - See the phpMyAdmin configuration storage section in this document to see - the benefits of this feature, and for a quick way of creating this database - and the needed tables. - - If you are the only user of this phpMyAdmin installation, you can use your - current database to store those special tables; in this case, just put your - current database name in $cfg['Servers'][$i]['pmadb']. For a multi-user - installation, set this parameter to the name of your central database - containing the phpMyAdmin configuration storage. -$cfg['Servers'][$i]['bookmarktable'] string - Since release 2.2.0 phpMyAdmin allows users to bookmark queries. This can - be useful for queries you often run. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + enter the table name in $cfg['Servers'][$i]['bookmarktable'] -$cfg['Servers'][$i]['relation'] string - Since release 2.2.4 you can describe, in a special 'relation' table, which - column is a key in another table (a foreign key). phpMyAdmin currently uses - this to - + make clickable, when you browse the master table, the data values that - point to the foreign table; - + display in an optional tool-tip the "display column" when browsing the - master table, if you move the mouse to a column containing a foreign - key (use also the 'table_info' table); - (see FAQ 6.7) - + in edit/insert mode, display a drop-down list of possible foreign keys - (key value and "display column" are shown) - (see FAQ 6.21) - + display links on the table properties page, to check referential - integrity (display missing foreign keys) for each described key; - + in query-by-example, create automatic joins (see FAQ 6.6) - + enable you to get a PDF schema of your database (also uses the - table_coords table). - The keys can be numeric or character. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the relation table name in $cfg['Servers'][$i]['relation'] - + now as normal user open phpMyAdmin and for each one of your tables - where you want to use this feature, click "Structure/Relation view/" - and choose foreign columns. - Please note that in the current version, master_db must be the same as - foreign_db. Those columns have been put in future development of the - cross-db relations. -$cfg['Servers'][$i]['table_info'] string - Since release 2.3.0 you can describe, in a special 'table_info' table, - which column is to be displayed as a tool-tip when moving the cursor over - the corresponding key. - This configuration variable will hold the name of this special table. To - allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['table_info'] (e.g. - 'pma_table_info') - + then for each table where you want to use this feature, click - "Structure/Relation view/Choose column to display" to choose the - column. - Usage tip: Display column. -$cfg['Servers'][$i]['table_coords'] string - $cfg['Servers'][$i]['pdf_pages'] string - Since release 2.3.0 you can have phpMyAdmin create PDF pages showing the - relations between your tables. To do this it needs two tables "pdf_pages" - (storing information about the available PDF pages) and "table_coords" - (storing coordinates where each table will be placed on a PDF schema - output). - - You must be using the "relation" feature. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the correct table names in $cfg['Servers'][$i]['table_coords'] and - $cfg['Servers'][$i]['pdf_pages'] - Usage tips: PDF output. -$cfg['Servers'][$i]['column_info'] string - Since release 2.3.0 you can store comments to describe each column for each - table. These will then be shown on the "printview". - - Starting with release 2.5.0, comments are consequently used on the table - property pages and table browse view, showing up as tool-tips above the - column name (properties page) or embedded within the header of table in - browse view. They can also be shown in a table dump. Please see the - relevant configuration directives later on. - - Also new in release 2.5.0 is a MIME-transformation system which is also - based on the following table structure. See Transformations for further - information. To use the MIME-transformation system, your column_info table - has to have the three new columns 'mimetype', 'transformation', - 'transformation_options'. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['column_info'] (e.g. - 'pma_column_info') - + to update your PRE-2.5.0 Column_comments Table use this: - - ALTER TABLE `pma_column_comments` - ADD `mimetype` VARCHAR( 255 ) NOT NULL, - ADD `transformation` VARCHAR( 255 ) NOT NULL, - ADD `transformation_options` VARCHAR( 255 ) NOT NULL; - - and remember that the Variable in config.inc.php has been renamed from - $cfg['Servers'][$i]['column_comments'] to $cfg['Servers'][$i] - ['column_info'] -$cfg['Servers'][$i]['history'] string - Since release 2.5.0 you can store your SQL history, which means all queries - you entered manually into the phpMyAdmin interface. If you don't want to - use a table-based history, you can use the JavaScript-based history. Using - that, all your history items are deleted when closing the window. - - Using $cfg['QueryHistoryMax'] you can specify an amount of history items - you want to have on hold. On every login, this list gets cut to the maximum - amount. - - The query history is only available if JavaScript is enabled in your - browser. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['history'] (e.g. - 'pma_history') -$cfg['Servers'][$i]['recent'] string - Since release 3.5.0 you can show recently used tables in the left - navigation frame. It helps you to jump across table directly, without the - need to select the database, and then select the table. Using $cfg - ['LeftRecentTable'] you can configure the maximum number of recent tables - shown. When you select a table from the list, it will jump to the page - specified in $cfg['LeftDefaultTabTable']. - - Without configuring the storage, you can still access the recently used - tables, but it will disappear after you logout. - - To allow the usage of this functionality persistently: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['recent'] (e.g. 'pma_recent') -$cfg['Servers'][$i]['table_uiprefs'] string - Since release 3.5.0 phpMyAdmin can be configured to remember several things - (sorted column $cfg['RememberSorting'] , column order, and column - visibility from a database table) for browsing tables. Without configuring - the storage, these features still can be used, but the values will - disappear after you logout. - - To allow the usage of these functionality persistently: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['table_uiprefs'] (e.g. - 'pma_table_uiprefs') -$cfg['Servers'][$i]['tracking'] string - Since release 3.3.x a tracking mechanism is available. It helps you to - track every SQL command which is executed by phpMyAdmin. The mechanism - supports logging of data manipulation and data definition statements. After - enabling it you can create versions of tables. - - The creation of a version has two effects: - + phpMyAdmin saves a snapshot of the table, including structure and - indexes. - + phpMyAdmin logs all commands which change the structure and/or data of - the table and links these commands with the version number. - Of course you can view the tracked changes. On the "Tracking" page a - complete report is available for every version. For the report you can use - filters, for example you can get a list of statements within a date range. - When you want to filter usernames you can enter * for all names or you - enter a list of names separated by ','. In addition you can export the - (filtered) report to a file or to a temporary database. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['tracking'] (e.g. - 'pma_tracking') -$cfg['Servers'][$i]['tracking_version_auto_create'] boolean - Whether the tracking mechanism creates versions for tables and views - automatically. Default value is false. - - If this is set to true and you create a table or view with - + CREATE TABLE ... - + CREATE VIEW ... - and no version exists for it, the mechanism will create a version for you - automatically. -$cfg['Servers'][$i]['tracking_default_statements'] string - Defines the list of statements the auto-creation uses for new versions. - Default value is - - CREATE TABLE,ALTER TABLE,DROP TABLE,RENAME TABLE, - CREATE INDEX,DROP INDEX, - INSERT,UPDATE,DELETE,TRUNCATE,REPLACE, - CREATE VIEW,ALTER VIEW,DROP VIEW, - CREATE DATABASE,ALTER DATABASE,DROP DATABASE - -$cfg['Servers'][$i]['tracking_add_drop_view'] boolean - Whether a DROP VIEW IF EXISTS statement will be added as first line to the - log when creating a view. Default value is true. - -$cfg['Servers'][$i]['tracking_add_drop_table'] boolean - Whether a DROP TABLE IF EXISTS statement will be added as first line to the - log when creating a table. Default value is true. - -$cfg['Servers'][$i]['tracking_add_drop_database'] boolean - Whether a DROP DATABASE IF EXISTS statement will be added as first line to - the log when creating a database. Default value is true. - -$cfg['Servers'][$i]['userconfig'] string - Since release 3.4.x phpMyAdmin allows users to set most preferences by - themselves and store them in the database. - - If you don't allow for storing preferences in pmadb, users can still - personalize phpMyAdmin, but settings will be saved in browser's local - storage, or, it is is unavailable, until the end of session. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['userconfig'] -$cfg['Servers'][$i]['designer_coords'] string - Since release 2.10.0 a Designer interface is available; it permits to - visually manage the relations. - - To allow the usage of this functionality: - + set up pmadb and the phpMyAdmin configuration storage - + put the table name in $cfg['Servers'][$i]['designer_coords'] (e.g. - 'pma_designer_coords') -$cfg['Servers'][$i]['MaxTableUiprefs'] integer - Maximum number of rows saved in $cfg['Servers'][$i]['table_uiprefs'] table. - - When tables are dropped or renamed, table_uiprefs may contain invalid data - (referring to tables which no longer exist). - We only keep this number of newest rows in table_uiprefs and automatically - delete older rows. -$cfg['Servers'][$i]['verbose_check'] boolean - Because release 2.5.0 introduced the new MIME-transformation support, the - column_info table got enhanced with three new columns. If the above - variable is set to TRUE (default) phpMyAdmin will check if you have the - latest table structure available. If not, it will emit a warning to the - superuser. - - You can disable this checking behavior by setting the variable to false, - which should offer a performance increase. - - Recommended to set to FALSE, when you are sure, your table structure is up - to date. -$cfg['Servers'][$i]['AllowRoot'] boolean - Whether to allow root access. This is just a shortcut for the AllowDeny - rules below. -$cfg['Servers'][$i]['AllowNoPassword'] boolean - Whether to allow logins without a password. The default value of false for - this parameter prevents unintended access to a MySQL server with was left - with an empty password for root or on which an anonymous (blank) user is - defined. -$cfg['Servers'][$i]['AllowDeny']['order'] string - If your rule order is empty, then IP authorization is disabled. - - If your rule order is set to 'deny,allow' then the system applies all deny - rules followed by allow rules. Access is allowed by default. Any client - which does not match a Deny command or does match an Allow command will be - allowed access to the server. - - If your rule order is set to 'allow,deny' then the system applies all allow - rules followed by deny rules. Access is denied by default. Any client which - does not match an Allow directive or does match a Deny directive will be - denied access to the server. - - If your rule order is set to 'explicit', authorization is performed in a - similar fashion to rule order 'deny,allow', with the added restriction that - your host/username combination must be listed in the allow rules, and not - listed in the deny rules. This is the most secure means of using Allow/Deny - rules, and was available in Apache by specifying allow and deny rules - without setting any order. - - Please also see $cfg['TrustedProxies'] for detecting IP address behind - proxies. -$cfg['Servers'][$i]['AllowDeny']['rules'] array of strings - The general format for the rules is as such: - - <'allow' | 'deny'> [from] - - If you wish to match all users, it is possible to use a '%' as a wildcard - in the username field. - There are a few shortcuts you can use in the ipmask field as well (please - note that those containing SERVER_ADDRESS might not be available on all - webservers): - - 'all' -> 0.0.0.0/0 - 'localhost' -> 127.0.0.1/8 - 'localnetA' -> SERVER_ADDRESS/8 - 'localnetB' -> SERVER_ADDRESS/16 - 'localnetC' -> SERVER_ADDRESS/24 - - Having an empty rule list is equivalent to either using 'allow % from all' - if your rule order is set to 'deny,allow' or 'deny % from all' if your rule - order is set to 'allow,deny' or 'explicit'. - - For the IP matching system, the following work: - xxx.xxx.xxx.xxx (an exact IP address) - xxx.xxx.xxx.[yyy-zzz] (an IP address range) - xxx.xxx.xxx.xxx/nn (CIDR, Classless Inter-Domain Routing type IP addresses) - But the following does not work: - xxx.xxx.xxx.xx[yyy-zzz] (partial IP address range) - Also IPv6 addresses are not supported. -$cfg['Servers'][$i]['DisableIS'] boolean - Disable using INFORMATION_SCHEMA to retrieve information (use SHOW commands - instead), because of speed issues when many databases are present. - Currently used in some parts of the code, more to come. -$cfg['Servers'][$i]['ShowDatabasesCommand'] string - On a server with a huge number of databases, the default SHOW DATABASES - command used to fetch the name of available databases will probably be too - slow, so it can be replaced by faster commands (see libraries/ - config.default.php for examples). -$cfg['Servers'][$i]['CountTables'] boolean - Whether to count the number of tables for each database when preparing the - list of databases for the navigation frame. -$cfg['Servers'][$i]['SignonScript'] string - Name of PHP script to be sourced and executed to obtain login credentials. - This is alternative approach to session based single signon. The script - needs to provide function get_login_credentials which returns list of - username and password, accepting single parameter of existing username (can - be empty). See examples/signon-script.php for an example. -$cfg['Servers'][$i]['SignonSession'] string - Name of session which will be used for signon authentication method. You - should use something different than phpMyAdmin, because this is session - which phpMyAdmin uses internally. Takes effect only if SignonScript is not - configured. -$cfg['Servers'][$i]['SignonURL'] string - URL where user will be redirected to log in for signon authentication - method. Should be absolute including protocol. -$cfg['Servers'][$i]['LogoutURL'] string - URL where user will be redirected after logout (doesn't affect config - authentication method). Should be absolute including protocol. -$cfg['ServerDefault'] integer - If you have more than one server configured, you can set $cfg - ['ServerDefault'] to any one of them to autoconnect to that server when - phpMyAdmin is started, or set it to 0 to be given a list of servers without - logging in. - If you have only one server configured, $cfg['ServerDefault'] MUST be set - to that server. -$cfg['AjaxEnable'] boolean - Defines whether to refresh only parts of certain pages using Ajax - techniques. Applies only where a non-Ajax behavior is possible; for - example, the Designer feature is Ajax-only so this directive does not apply - to it. -$cfg['VersionCheck'] boolean - Enables check for latest versions using javascript on main phpMyAdmin page. -$cfg['MaxDbList'] integer - The maximum number of database names to be displayed in the navigation - frame and the database list. -$cfg['MaxTableList'] integer - The maximum number of table names to be displayed in the main panel's list - (except on the Export page). This limit is also enforced in the navigation - panel when in Light mode. -$cfg['ShowHint'] boolean - Whether or not to show hints (for example, hints when hovering over table - headers). -$cfg['MaxCharactersInDisplayedSQL'] integer - The maximum number of characters when a SQL query is displayed. The default - limit of 1000 should be correct to avoid the display of tons of hexadecimal - codes that represent BLOBs, but some users have real SQL queries that are - longer than 1000 characters. Also, if a query's length exceeds this limit, - this query is not saved in the history. -$cfg['OBGzip'] string/boolean - Defines whether to use GZip output buffering for increased speed in HTTP - transfers. - Set to true/false for enabling/disabling. When set to 'auto' (string), - phpMyAdmin tries to enable output buffering and will automatically disable - it if your browser has some problems with buffering. IE6 with a certain - patch is known to cause data corruption when having enabled buffering. -$cfg['PersistentConnections'] boolean - Whether persistent connections should be used or not. Works with following - extensions: - + mysql (mysql_pconnect), - + mysqli (requires PHP 5.3.0 or newer, more information). -$cfg['ForceSSL'] boolean - Whether to force using https while accessing phpMyAdmin. -$cfg['ExecTimeLimit'] integer [number of seconds] - Set the number of seconds a script is allowed to run. If seconds is set to - zero, no time limit is imposed. - This setting is used while importing/exporting dump files and in the - Synchronize feature but has no effect when PHP is running in safe mode. -$cfg['SessionSavePath'] string - Path for storing session data (session_save_path PHP parameter). -$cfg['MemoryLimit'] string [number of bytes] - Set the number of bytes a script is allowed to allocate. If set to zero, no - limit is imposed. - This setting is used while importing/exporting dump files and at some other - places in phpMyAdmin so you definitely don't want to put here a too low - value. It has no effect when PHP is running in safe mode. - You can also use any string as in php.ini, eg. '16M'. Ensure you don't omit - the suffix (16 means 16 bytes!) -$cfg['SkipLockedTables'] boolean - Mark used tables and make it possible to show databases with locked tables - (since MySQL 3.23.30). -$cfg['ShowSQL'] boolean - Defines whether SQL queries generated by phpMyAdmin should be displayed or - not. -$cfg['RetainQueryBox'] boolean - Defines whether the SQL query box should be kept displayed after its - submission. -$cfg['AllowUserDropDatabase'] boolean - Defines whether normal users (non-administrator) are allowed to delete - their own database or not. If set as FALSE, the link "Drop Database" will - not be shown, and even a "DROP DATABASE mydatabase" will be rejected. Quite - practical for ISP's with many customers. - Please note that this limitation of SQL queries is not as strict as when - using MySQL privileges. This is due to nature of SQL queries which might be - quite complicated. So this choice should be viewed as help to avoid - accidental dropping rather than strict privilege limitation. -$cfg['Confirm'] boolean - Whether a warning ("Are your really sure...") should be displayed when - you're about to lose data. -$cfg['LoginCookieRecall'] boolean - Define whether the previous login should be recalled or not in cookie - authentication mode. - - This is automatically disabled if you do not have configured $cfg - ['blowfish_secret']. -$cfg['LoginCookieValidity'] integer [number of seconds] - Define how long is login cookie valid. Please note that php configuration - option session.gc_maxlifetime might limit session validity and if session - is lost, login cookie is also invalidated. So it is a good idea to set - session.gc_maxlifetime not lower than the value of $cfg - ['LoginCookieValidity']. -$cfg['LoginCookieStore'] integer [number of seconds] - Define how long login cookie should be stored in browser. Default 0 means - that it will be kept for existing session. This is recommended for not - trusted environments. -$cfg['LoginCookieDeleteAll'] boolean - If enabled (default), logout deletes cookies for all servers, otherwise - only for current one. Setting this to false makes it easy to forget to log - out from other server, when you are using more of them. -$cfg['UseDbSearch'] boolean - Define whether the "search string inside database" is enabled or not. -$cfg['IgnoreMultiSubmitErrors'] boolean - Define whether phpMyAdmin will continue executing a multi-query statement - if one of the queries fails. Default is to abort execution. -$cfg['VerboseMultiSubmit'] boolean - Define whether phpMyAdmin will output the results of each query of a - multi-query statement embedded into the SQL output as inline comments. - Defaults to TRUE. -$cfg['AllowArbitraryServer'] boolean - If enabled, allows you to log in to arbitrary servers using cookie auth and - permits to specify servers of your choice in the Synchronize dialog. - - NOTE: Please use this carefully, as this may allow users access to MySQL - servers behind the firewall where your HTTP server is placed. -$cfg['Error_Handler']['display'] boolean - Whether to display errors from PHP or not. -$cfg['Error_Handler']['gather'] boolean - Whether to gather errors from PHP or not. -$cfg['LeftFrameLight'] boolean - Defines whether to use a select-based menu and display only the current - tables in the left frame (smaller page). Only in Non-Lightmode you can use - the feature to display nested folders using $cfg['LeftFrameTableSeparator'] -$cfg['LeftFrameDBTree'] boolean - Defines whether to display the names of databases (in the selector) using a - tree, see also $cfg['LeftFrameDBSeparator']. -$cfg['LeftFrameDBSeparator'] string or array - The string used to separate the parts of the database name when showing - them in a tree. Alternatively you can specify more strings in an array and - all of them will be used as a separator. -$cfg['LeftFrameTableSeparator'] string - Defines a string to be used to nest table spaces. Defaults to '__'. This - means if you have tables like 'first__second__third' this will be shown as - a three-level hierarchy like: first > second > third. If set to FALSE or - empty, the feature is disabled. NOTE: You should not use this separator at - the beginning or end of a table name or multiple times after another - without any other characters in between. -$cfg['LeftFrameTableLevel'] string - Defines how many sublevels should be displayed when splitting up tables by - the above separator. -$cfg['LeftRecentTable'] integer - The maximum number of recently used tables shown in the left navigation - frame. Set this to 0 (zero) to disable the listing of recent tables. -$cfg['ShowTooltip'] boolean - Defines whether to display table comment as tool-tip in left frame or not. -$cfg['ShowTooltipAliasDB'] boolean - If tool-tips are enabled and a DB comment is set, this will flip the - comment and the real name. That means that if you have a database called - 'user0001' and add the comment 'MyName' on it, you will see the name - 'MyName' used consequently in the left frame and the tool-tip shows the - real name of the DB. -$cfg['ShowTooltipAliasTB'] boolean/string - Same as $cfg['ShowTooltipAliasDB'], except this works for table names. When - setting this to 'nested', the Alias of the Tablename is only used to split/ - nest the tables according to the $cfg['LeftFrameTableSeparator'] directive. - So only the folder is called like the Alias, the tablename itself stays the - real tablename. -$cfg['LeftDisplayLogo'] boolean - Defines whether or not to display the phpMyAdmin logo at the top of the - left frame. Defaults to TRUE. -$cfg['LeftLogoLink'] string - Enter URL where logo in the navigation frame will point to. For use - especially with self made theme which changes this. The default value for - this is main.php. -$cfg['LeftLogoLinkWindow'] string - Whether to open the linked page in the main window (main) or in a new one - (new). Note: use new if you are linking to phpmyadmin.net. -$cfg['LeftDisplayTableFilterMinimum'] integer - Defines the minimum number of tables to display a JavaScript filter box - above the list of tables in the left frame. Defaults to 30. To disable the - filter completely some high number can be used (e.g. 9999) -$cfg['LeftDisplayServers'] boolean - Defines whether or not to display a server choice at the top of the left - frame. Defaults to FALSE. -$cfg['DisplayServersList'] boolean - Defines whether to display this server choice as links instead of in a - drop-down. Defaults to FALSE (drop-down). -$cfg['DisplayDatabasesList'] boolean or text - Defines whether to display database choice in light navigation frame as - links instead of in a drop-down. Defaults to 'auto' - on main page list is - shown, when database is selected, only drop down is displayed. -$cfg['LeftDefaultTabTable'] string - Defines the tab displayed by default when clicking the small icon next to - each table name in the navigation panel. Possible values: - "tbl_structure.php", "tbl_sql.php", "tbl_select.php", "tbl_change.php" or - "sql.php". -$cfg['ShowStats'] boolean - Defines whether or not to display space usage and statistics about - databases and tables. - Note that statistics requires at least MySQL 3.23.3 and that, at this date, - MySQL doesn't return such information for Berkeley DB tables. -$cfg['ShowServerInfo'] boolean - Defines whether to display detailed server information on main page. You - can additionally hide more information by using $cfg['Servers'][$i] - ['verbose']. -$cfg['ShowPhpInfo'] boolean - $cfg['ShowChgPassword'] boolean - $cfg['ShowCreateDb'] boolean - Defines whether to display the "PHP information" and "Change password " - links and form for creating database or not at the starting main (right) - frame. This setting does not check MySQL commands entered directly. - - Please note that to block the usage of phpinfo() in scripts, you have to - put this in your php.ini: - - disable_functions = phpinfo() - - Also note that enabling the "Change password " link has no effect with - "config" authentication mode: because of the hard coded password value in - the configuration file, end users can't be allowed to change their - passwords. -$cfg['SuggestDBName'] boolean - Defines whether to suggest a database name on the "Create Database" form or - to keep the textfield empty. -$cfg['NavigationBarIconic'] string - Defines whether navigation bar buttons and the right panel top menu contain - text or symbols only. A value of TRUE displays icons, FALSE displays text - and 'both' displays both icons and text. -$cfg['ShowAll'] boolean - Defines whether a user should be displayed a "Show all" button in browse - mode or not in all cases. By default it is shown only on small tables (less - than 5 ? $cfg['MaxRows'] rows) to avoid performance issues while getting - too many rows. -$cfg['MaxRows'] integer - Number of rows displayed when browsing a result set and no LIMIT clause is - used. If the result set contains more rows, "Previous" and "Next" links - will be shown. -$cfg['Order'] string [DESC|ASC|SMART] - Defines whether columns are displayed in ascending (ASC) order, in - descending (DESC) order or in a "smart" (SMART) order - I.E. descending - order for columns of type TIME, DATE, DATETIME and TIMESTAMP, ascending - order else- by default. -$cfg['DisplayBinaryAsHex'] boolean - Defines whether the "Show binary contents as HEX" browse option is ticked - by default. -$cfg['ProtectBinary'] boolean or string - Defines whether BLOB or BINARY columns are protected from editing when - browsing a table's content. Valid values are: - + FALSE to allow editing of all columns; - + 'blob' to allow editing of all columns except BLOBS; - + 'all' to disallow editing of all BINARY or BLOB columns. -$cfg['ShowFunctionFields'] boolean - Defines whether or not MySQL functions fields should be initially displayed - in edit/insert mode. Since version 2.10, the user can toggle this setting - from the interface. -$cfg['ShowFieldTypesInDataEditView'] boolean - Defines whether or not type fields should be initially displayed in edit/ - insert mode. The user can toggle this setting from the interface. -$cfg['CharEditing'] string - Defines which type of editing controls should be used for CHAR and VARCHAR - columns. Possible values are: - + input - this allows to limit size of text to size of columns in MySQL, - but has problems with newlines in columns - + textarea - no problems with newlines in columns, but also no length - limitations - Default is old behavior so input. -$cfg['MinSizeForInputField'] integer - Defines the minimum size for input fields generated for CHAR and VARCHAR - columns. -$cfg['MaxSizeForInputField'] integer - Defines the maximum size for input fields generated for CHAR and VARCHAR - columns. -$cfg['InsertRows'] integer - Defines the maximum number of concurrent entries for the Insert page. -$cfg['ForeignKeyMaxLimit'] integer - If there are fewer items than this in the set of foreign keys, then a - drop-down box of foreign keys is presented, in the style described by the - $cfg['ForeignKeyDropdownOrder'] setting. -$cfg['ForeignKeyDropdownOrder'] array - For the foreign key drop-down fields, there are several methods of display, - offering both the key and value data. The contents of the array should be - one or both of the following strings: 'content-id', 'id-content'. -$cfg['ZipDump'] boolean - $cfg['GZipDump'] boolean - $cfg['BZipDump'] boolean - Defines whether to allow the use of zip/GZip/BZip2 compression when - creating a dump file -$cfg['CompressOnFly'] boolean - Defines whether to allow on the fly compression for GZip/BZip2 compressed - exports. This doesn't affect smaller dumps and allows users to create - larger dumps that won't otherwise fit in memory due to php memory limit. - Produced files contain more GZip/BZip2 headers, but all normal programs - handle this correctly. -$cfg['LightTabs'] boolean - If set to TRUE, use less graphically intense tabs on the top of the - mainframe. -$cfg['PropertiesIconic'] string - If set to TRUE, will display icons instead of text for db and table - properties links (like 'Browse', 'Select', 'Insert', ...). - Can be set to 'both' if you want icons AND text. - When set to FALSE, will only show text. -$cfg['PropertiesNumColumns'] integer - How many columns will be utilized to display the tables on the database - property view? Default is 1 column. When setting this to a value larger - than 1, the type of the database will be omitted for more display space. -$cfg['DefaultTabServer'] string - Defines the tab displayed by default on server view. Possible values: - "main.php" (recommended for multi-user setups), "server_databases.php", - "server_status.php", "server_variables.php" or "server_privileges.php". -$cfg['DefaultTabDatabase'] string - Defines the tab displayed by default on database view. Possible values: - "db_structure.php", "db_sql.php" or "db_search.php". -$cfg['DefaultTabTable'] string - Defines the tab displayed by default on table view. Possible values: - "tbl_structure.php", "tbl_sql.php", "tbl_select.php", "tbl_change.php" or - "sql.php". -$cfg['MySQLManualBase'] string - If set to an URL which points to the MySQL documentation (type depends on - $cfg['MySQLManualType']), appropriate help links are generated. - See MySQL Documentation page for more information about MySQL manuals and - their types. -$cfg['MySQLManualType'] string - Type of MySQL documentation: - + viewable - "viewable online", current one used on MySQL website - + searchable - "Searchable, with user comments" - + chapters - "HTML, one page per chapter" - + big - "HTML, all on one page" - + none - do not show documentation links -$cfg['DefaultLang'] string - Defines the default language to use, if not browser-defined or - user-defined. - The corresponding language file needs to be in locale/code/LC_MESSAGES/ - phpmyadmin.mo. -$cfg['DefaultConnectionCollation'] string - Defines the default connection collation to use, if not user-defined. - See the MySQL documentation for list of possible values. This setting is - ignored when connected to Drizzle server. -$cfg['Lang'] string - Force language to use. - The corresponding language file needs to be in locale/code/LC_MESSAGES/ - phpmyadmin.mo. -$cfg['FilterLanguages'] string - Limit list of available languages to those matching the given regular - expression. For example if you want only Czech and English, you should set - filter to '^(cs|en)'. -$cfg['RecodingEngine'] string - You can select here which functions will be used for character set - conversion. Possible values are: - + auto - automatically use available one (first is tested iconv, then - recode) - + iconv - use iconv or libiconv functions - + recode - use recode_string function - + none - disable encoding conversion - Default is auto. - Enabled charset conversion activates a pull-down menu in the Export and - Import pages, to choose the character set when exporting a file. The - default value in this menu comes from $cfg['Export']['charset'] and $cfg - ['Import']['charset']. -$cfg['IconvExtraParams'] string - Specify some parameters for iconv used in charset conversion. See iconv - documentation for details. By default //TRANSLIT is used, so that invalid - characters will be transliterated. -$cfg['AvailableCharsets'] array - Available character sets for MySQL conversion. You can add your own (any of - supported by recode/iconv) or remove these which you don't use. Character - sets will be shown in same order as here listed, so if you frequently use - some of these move them to the top. -$cfg['TrustedProxies'] array - Lists proxies and HTTP headers which are trusted for IP Allow/Deny. This - list is by default empty, you need to fill in some trusted proxy servers if - you want to use rules for IP addresses behind proxy. - - The following example specifies that phpMyAdmin should trust a - HTTP_X_FORWARDED_FOR (X-Forwarded-For) header coming from the proxy - 1.2.3.4: - - $cfg['TrustedProxies'] = - array('1.2.3.4' => 'HTTP_X_FORWARDED_FOR'); - - The $cfg['Servers'][$i]['AllowDeny']['rules'] directive uses the client's - IP address as usual. -$cfg['GD2Available'] string - Specifies whether GD >= 2 is available. If yes it can be used for MIME - transformations. - Possible values are: - + auto - automatically detect - + yes - GD 2 functions can be used - + no - GD 2 function cannot be used - Default is auto. -$cfg['CheckConfigurationPermissions'] boolean - We normally check the permissions on the configuration file to ensure it's - not world writable. However, phpMyAdmin could be installed on a NTFS - filesystem mounted on a non-Windows server, in which case the permissions - seems wrong but in fact cannot be detected. In this case a sysadmin would - set this parameter to FALSE. Default is TRUE. -$cfg['LinkLengthLimit'] integer - Limit for length of URL in links. When length would be above this limit, it - is replaced by form with button. This is required as some web servers ( - IIS) have problems with long URLs. Default is 1000. -$cfg['DisableMultiTableMaintenance'] boolean - In the database Structure page, it's possible to mark some tables then - choose an operation like optimizing for many tables. This can slow down a - server; therefore, setting this to true prevents this kind of multiple - maintenance operation. Default is false. -$cfg['NaviWidth'] integer - Navi frame width in pixels. See themes/themename/layout.inc.php. -$cfg['NaviBackground'] string [CSS color for background] - $cfg['MainBackground'] string [CSS color for background] - The background styles used for both the frames. See themes/themename/ - layout.inc.php. -$cfg['NaviPointerBackground'] string [CSS color for background] - $cfg['NaviPointerColor'] string [CSS color] - The style used for the pointer in the navi frame. See themes/themename/ - layout.inc.php. -$cfg['LeftPointerEnable'] boolean - A value of TRUE activates the navi pointer (when LeftFrameLight is FALSE). -$cfg['Border'] integer - The size of a table's border. See themes/themename/layout.inc.php. -$cfg['ThBackground'] string [CSS color for background] - $cfg['ThColor'] string [CSS color] - The style used for table headers. See themes/themename/layout.inc.php. -$cfg['BgOne'] string [CSS color] - The color (HTML) #1 for table rows. See themes/themename/layout.inc.php. -$cfg['BgTwo'] string [CSS color] - The color (HTML) #2 for table rows. See themes/themename/layout.inc.php. -$cfg['BrowsePointerBackground'] string [CSS color] - $cfg['BrowsePointerColor'] string [CSS color] - $cfg['BrowseMarkerBackground'] string [CSS color] - $cfg['BrowseMarkerColor'] string [CSS color] - The colors (HTML) uses for the pointer and the marker in browse mode. - The former feature highlights the row over which your mouse is passing and - the latter lets you visually mark/unmark rows by clicking on them. - Highlighting / marking a column is done by hovering over / clicking the - column's header (outside of the text). - See themes/themename/layout.inc.php. -$cfg['FontFamily'] string - You put here a valid CSS font family value, for example arial, sans-serif. - See themes/themename/layout.inc.php. -$cfg['FontFamilyFixed'] string - You put here a valid CSS font family value, for example monospace. This one - is used in textarea. - See themes/themename/layout.inc.php. -$cfg['BrowsePointerEnable'] boolean - Whether to activate the browse pointer or not. -$cfg['BrowseMarkerEnable'] boolean - Whether to activate the browse marker or not. -$cfg['TextareaCols'] integer - $cfg['TextareaRows'] integer - $cfg['CharTextareaCols'] integer - $cfg['CharTextareaRows'] integer - Number of columns and rows for the textareas. - This value will be emphasized (*2) for SQL query textareas and (*1.25) for - SQL textareas inside the query window. - The Char* values are used for CHAR and VARCHAR editing (if configured via - $cfg['CharEditing']). -$cfg['LongtextDoubleTextarea'] boolean - Defines whether textarea for LONGTEXT columns should have double size. -$cfg['TextareaAutoSelect'] boolean - Defines if the whole textarea of the query box will be selected on click. -$cfg['LimitChars'] integer - Maximum number of characters shown in any non-numeric field on browse view. - Can be turned off by a toggle button on the browse page. -$cfg['RowActionLinks'] string - Defines the place where table row links (Edit, Copy, Delete) would be put - when tables contents are displayed (you may have them displayed at the left - side, right side, both sides or nowhere). "left" and "right" are parsed as - "top" and "bottom" with vertical display mode. -$cfg['DefaultDisplay'] string - There are 3 display modes: horizontal, horizontalflipped and vertical. - Define which one is displayed by default. The first mode displays each row - on a horizontal line, the second rotates the headers by 90 degrees, so you - can use descriptive headers even though columns only contain small values - and still print them out. The vertical mode sorts each row on a vertical - lineup. -$cfg['RememberSorting'] boolean - If enabled, remember the sorting of each table when browsing them. -$cfg['HeaderFlipType'] string - The HeaderFlipType can be set to 'auto', 'css' or 'fake'. When using 'css' - the rotation of the header for horizontalflipped is done via CSS. The CSS - transformation currently works only in Internet Explorer.If set to 'fake' - PHP does the transformation for you, but of course this does not look as - good as CSS. The 'auto' option enables CSS transformation when browser - supports it and use PHP based one otherwise. -$cfg['ShowBrowseComments'] boolean - $cfg['ShowPropertyComments'] boolean - By setting the corresponding variable to TRUE you can enable the display of - column comments in Browse or Property display. In browse mode, the comments - are shown inside the header. In property mode, comments are displayed using - a CSS-formatted dashed-line below the name of the column. The comment is - shown as a tool-tip for that column. -$cfg['SQLQuery']['Edit'] boolean - Whether to display an edit link to change a query in any SQL Query box. -$cfg['SQLQuery']['Explain'] boolean - Whether to display a link to explain a SELECT query in any SQL Query box. -$cfg['SQLQuery']['ShowAsPHP'] boolean - Whether to display a link to wrap a query in PHP code in any SQL Query box. -$cfg['SQLQuery']['Validate'] boolean - Whether to display a link to validate a query in any SQL Query box. See - also $cfg_SQLValidator. -$cfg['SQLQuery']['Refresh'] boolean - Whether to display a link to refresh a query in any SQL Query box. -$cfg['UploadDir'] string - The name of the directory where SQL files have been uploaded by other means - than phpMyAdmin (for example, ftp). Those files are available under a - drop-down box when you click the database or table name, then the Import - tab. - - If you want different directory for each user, %u will be replaced with - username. - - Please note that the file names must have the suffix ".sql" (or ".sql.bz2" - or ".sql.gz" if support for compressed formats is enabled). - - This feature is useful when your file is too big to be uploaded via HTTP, - or when file uploads are disabled in PHP. - - Please note that if PHP is running in safe mode, this directory must be - owned by the same user as the owner of the phpMyAdmin scripts. - - See also FAQ 1.16 for alternatives. -$cfg['SaveDir'] string - The name of the directory where dumps can be saved. - - If you want different directory for each user, %u will be replaced with - username. - - Please note that the directory must exist and has to be writable for the - user running webserver. - - Please note that if PHP is running in safe mode, this directory must be - owned by the same user as the owner of the phpMyAdmin scripts. -$cfg['TempDir'] string - The name of the directory where temporary files can be stored. - - This is needed for importing ESRI Shapefiles, see FAQ 6.30 and to work - around limitations of open_basedir for uploaded files, see FAQ 1.11. - - If the directory where phpMyAdmin is installed is subject to an - open_basedir restriction, you need to create a temporary directory in some - directory accessible by the web server. However for security reasons, this - directory should be outside the tree published by webserver. If you cannot - avoid having this directory published by webserver, place at least an empty - index.html file there, so that directory listing is not possible. - - This directory should have as strict permissions as possible as the only - user required to access this directory is the one who runs the webserver. - If you have root privileges, simply make this user owner of this directory - and make it accessible only by it: - - - chown www-data:www-data tmp - chmod 700 tmp - - If you cannot change owner of the directory, you can achieve a similar - setup using ACL: - - chmod 700 tmp - setfacl -m "g:www-data:rwx" tmp - setfacl -d -m "g:www-data:rwx" tmp - - If neither of above works for you, you can still make the directory chmod - 777, but it might impose risk of other users on system reading and writing - data in this directory. -$cfg['Export'] array - In this array are defined default parameters for export, names of items are - similar to texts seen on export page, so you can easily identify what they - mean. -$cfg['Export']['method'] string - Defines how the export form is displayed when it loads. Valid values are: - + quick to display the minimum number of options to configure - + custom to display every available option to configure - + custom-no-form same as custom but does not display the option of using - quick export -$cfg['Import'] array - In this array are defined default parameters for import, names of items are - similar to texts seen on import page, so you can easily identify what they - mean. -$cfg['SaveCellsAtOnce'] boolean - Defines whether or not to save all edited cells at once in browse-mode. -$cfg['ShowDisplayDirection'] boolean - Defines whether or not type display direction option is shown when browsing - a table. -$cfg['RepeatCells'] integer - Repeat the headers every X cells, or 0 to deactivate. -$cfg['EditInWindow'] boolean - $cfg['QueryWindowWidth'] integer - $cfg['QueryWindowHeight'] integer - $cfg['QueryHistoryDB'] boolean - $cfg['QueryWindowDefTab'] string - $cfg['QueryHistoryMax'] integer - All those variables affect the query window feature. A SQL link or icon is - always displayed on the left panel. If JavaScript is enabled in your - browser, a click on this opens a distinct query window, which is a direct - interface to enter SQL queries. Otherwise, the right panel changes to - display a query box. - - The size of this query window can be customized with $cfg - ['QueryWindowWidth'] and $cfg['QueryWindowHeight'] - both integers for the - size in pixels. Note that normally, those parameters will be modified in - layout.inc.php for the theme you are using. - - If $cfg['EditInWindow'] is set to true, a click on [Edit] from the results - page (in the "Showing Rows" section) opens the query window and puts the - current query inside it. If set to false, clicking on the link puts the SQL - query in the right panel's query box. - - The usage of the JavaScript query window is recommended if you have a - JavaScript enabled browser. Basic functions are used to exchange quite a - few variables, so most 4th generation browsers should be capable to use - that feature. It currently is only tested with Internet Explorer 6 and - Mozilla 1.x. - - If $cfg['QueryHistoryDB'] is set to TRUE, all your Queries are logged to a - table, which has to be created by you (see $cfg['Servers'][$i]['history']). - If set to FALSE, all your queries will be appended to the form, but only as - long as your window is opened they remain saved. - - When using the JavaScript based query window, it will always get updated - when you click on a new table/db to browse and will focus if you click on - "Edit SQL" after using a query. You can suppress updating the query window - by checking the box "Do not overwrite this query from outside the window" - below the query textarea. Then you can browse tables/databases in the - background without losing the contents of the textarea, so this is - especially useful when composing a query with tables you first have to look - in. The checkbox will get automatically checked whenever you change the - contents of the textarea. Please uncheck the button whenever you definitely - want the query window to get updated even though you have made alterations. - - If $cfg['QueryHistoryDB'] is set to TRUE you can specify the amount of - saved history items using $cfg['QueryHistoryMax']. - - The query window also has a custom tabbed look to group the features. Using - the variable $cfg['QueryWindowDefTab'] you can specify the default tab to - be used when opening the query window. It can be set to either 'sql', - 'files', 'history' or 'full'. -$cfg['BrowseMIME'] boolean - Enable MIME-transformations. -$cfg['MaxExactCount'] integer - For InnoDB tables, determines for how large tables phpMyAdmin should get - the exact row count using SELECT COUNT. If the approximate row count as - returned by SHOW TABLE STATUS is smaller than this value, SELECT COUNT will - be used, otherwise the approximate count will be used. -$cfg['MaxExactCountViews'] integer - For VIEWs, since obtaining the exact count could have an impact on - performance, this value is the maximum to be displayed, using a SELECT - COUNT ... LIMIT. Setting this to 0 bypasses any row counting. -$cfg['NaturalOrder'] boolean - Sorts database and table names according to natural order (for example, t1, - t2, t10). Currently implemented in the left panel (Light mode) and in - Database view, for the table list. -$cfg['InitialSlidersState'] string - If set to 'closed', the visual sliders are initially in a closed state. A - value of 'open' does the reverse. To completely disable all visual sliders, - use 'disabled'. -$cfg['UserprefsDisallow'] array - Contains names of configuration options (keys in $cfg array) that users - can't set through user preferences. For possible values, refer to libraries - /config/user_preferences.forms.php. -$cfg['UserprefsDeveloperTab'] boolean - Activates in the user preferences a tab containing options for developers - of phpMyAdmin. -$cfg['TitleTable'] string -$cfg['TitleDatabase'] string -$cfg['TitleServer'] string -$cfg['TitleDefault'] string - Allows you to specify window's title bar. You can use format string - expansion. -$cfg['ErrorIconic'] boolean - Uses icons for warnings, errors and informations. -$cfg['MainPageIconic'] boolean - Uses icons on main page in lists and menu tabs. -$cfg['ReplaceHelpImg'] boolean - Shows a help button instead of the "Documentation" message. -$cfg['ThemePath'] string - If theme manager is active, use this as the path of the subdirectory - containing all the themes. -$cfg['ThemeManager'] boolean - Enables user-selectable themes. See FAQ 2.7. -$cfg['ThemeDefault'] string - The default theme (a subdirectory under cfg['ThemePath']). -$cfg['ThemePerServer'] boolean - Whether to allow different theme for each server. -$cfg['DefaultQueryTable'] string - $cfg['DefaultQueryDatabase'] string - Default queries that will be displayed in query boxes when user didn't - specify any. You can use standard format string expansion. -$cfg['SQP']['fmtType'] string [html|none] - The main use of the new SQL Parser is to pretty-print SQL queries. By - default we use HTML to format the query, but you can disable this by - setting this variable to 'none'. -$cfg['SQP']['fmtInd'] float - $cfg['SQP']['fmtIndUnit'] string [em|px|pt|ex] - For the pretty-printing of SQL queries, under some cases the part of a - query inside a bracket is indented. By changing $cfg['SQP']['fmtInd'] you - can change the amount of this indent. - Related in purpose is $cfg['SQP']['fmtIndUnit'] which specifies the units - of the indent amount that you specified. This is used via stylesheets. -$cfg['SQP']['fmtColor'] array of string tuples - This array is used to define the colours for each type of element of the - pretty-printed SQL queries. The tuple format is - class => [HTML colour code | empty string] - If you specify an empty string for the color of a class, it is ignored in - creating the stylesheet. You should not alter the class names, only the - colour strings. - Class name key: - + comment Applies to all comment sub-classes - + comment_mysql Comments as "#...\n" - + comment_ansi Comments as "-- ...\n" - + comment_c Comments as "/*...*/" - + digit Applies to all digit sub-classes - + digit_hex Hexadecimal numbers - + digit_integer Integer numbers - + digit_float Floating point numbers - + punct Applies to all punctuation sub-classes - + punct_bracket_open_round Opening brackets"(" - + punct_bracket_close_round Closing brackets ")" - + punct_listsep List item Separator "," - + punct_qualifier Table/Column Qualifier "." - + punct_queryend End of query marker ";" - + alpha Applies to all alphabetic classes - + alpha_columnType Identifiers matching a column type - + alpha_columnAttrib Identifiers matching a database/table/column - attribute - + alpha_functionName Identifiers matching a MySQL function name - + alpha_reservedWord Identifiers matching any other reserved word - + alpha_variable Identifiers matching a SQL variable "@foo" - + alpha_identifier All other identifiers - + quote Applies to all quotation mark classes - + quote_double Double quotes " - + quote_single Single quotes ' - + quote_backtick Backtick quotes ` -$cfg['SQLValidator'] boolean - - $cfg['SQLValidator']['use'] boolean - phpMyAdmin now supports use of the Mimer SQL Validator service, as - originally published on Slashdot. - For help in setting up your system to use the service, see the FAQ 6.14 - . - $cfg['SQLValidator']['username'] string - $cfg['SQLValidator']['password'] string - The SOAP service allows you to log in with anonymous and any password, - so we use those by default. Instead, if you have an account with them, - you can put your login details here, and it will be used in place of - the anonymous login. - -$cfg['DBG'] - DEVELOPERS ONLY! -$cfg['DBG']['sql'] boolean - DEVELOPERS ONLY! - Enable logging queries and execution times to be displayed in the bottom of - main page (right frame). -$cfg['ColumnTypes'] array - All possible types of a MySQL column. In most cases you don't need to edit - this. -$cfg['AttributeTypes'] array - Possible attributes for columns. In most cases you don't need to edit this. -$cfg['Functions'] array - A list of functions MySQL supports. In most cases you don't need to edit - this. -$cfg['RestrictColumnTypes'] array - Mapping of column types to meta types used for preferring displayed - functions. In most cases you don't need to edit this. -$cfg['RestrictFunctions'] array - Functions preferred for column meta types as defined in $cfg - ['RestrictColumnTypes']. In most cases you don't need to edit this. -$cfg['DefaultFunctions'] array - Functions selected by default when inserting/changing row, Functions are - defined for meta types from $cfg['RestrictColumnTypes'] and for - first_timestamp, which is used for first timestamp column in table. - -Transformations - - 1. Introduction - 2. Usage - 3. File structure - -1. Introduction - -To enable transformations, you have to setup the column_info table and the -proper directives. Please see the Configuration section on how to do so. - -You can apply different transformations to the contents of each column. The -transformation will take the content of each column and transform it with -certain rules defined in the selected transformation. - -Say you have a column 'filename' which contains a filename. Normally you would -see in phpMyAdmin only this filename. Using transformations you can transform -that filename into a HTML link, so you can click inside of the phpMyAdmin -structure on the column's link and will see the file displayed in a new browser -window. Using transformation options you can also specify strings to append/ -prepend to a string or the format you want the output stored in. - -For a general overview of all available transformations and their options, you -can consult your // -transformation_overview.php installation. - -For a tutorial on how to effectively use transformations, see our Link section -on the official phpMyAdmin homepage. - -2. Usage - -Go to your tbl_structure.php page (i.e. reached through clicking on the -'Structure' link for a table). There click on "Change" (or change icon) and -there you will see three new fields at the end of the line. They are called -'MIME-type', 'Browser transformation' and 'Transformation options'. - - * The field 'MIME-type' is a drop-down field. Select the MIME-type that - corresponds to the column's contents. Please note that transformations are - inactive as long as no MIME-type is selected. - * The field 'Browser transformation' is a drop-down field. You can choose - from a hopefully growing amount of pre-defined transformations. See below - for information on how to build your own transformation. - There are global transformations and mimetype-bound transformations. Global - transformations can be used for any mimetype. They will take the mimetype, - if necessary, into regard. Mimetype-bound transformations usually only - operate on a certain mimetype. There are transformations which operate on - the main mimetype (like 'image'), which will most likely take the subtype - into regard, and those who only operate on a specific subtype (like 'image/ - jpeg'). - You can use transformations on mimetypes for which the function was not - defined for. There is no security check for you selected the right - transformation, so take care of what the output will be like. - * The field 'Transformation options' is a free-type textfield. You have to - enter transform-function specific options here. Usually the transforms can - operate with default options, but it is generally a good idea to look up - the overview to see which options are necessary. - Much like the ENUM/SET-Fields, you have to split up several options using - the format 'a','b','c',...(NOTE THE MISSING BLANKS). This is because - internally the options will be parsed as an array, leaving the first value - the first element in the array, and so forth. - If you want to specify a MIME character set you can define it in the - transformation_options. You have to put that outside of the pre-defined - options of the specific mime-transform, as the last value of the set. Use - the format "'; charset=XXX'". If you use a transform, for which you can - specify 2 options and you want to append a character set, enter "'first - parameter','second parameter','charset=us-ascii'". You can, however use the - defaults for the parameters: "'','','charset=us-ascii'". - -3. File structure - -All mimetypes and their transformations are defined through single files in the -directory 'libraries/transformations/'. - -They are stored in files to ease up customization and easy adding of new -transformations. - -Because the user cannot enter own mimetypes, it is kept sure that -transformations always work. It makes no sense to apply a transformation to a -mimetype the transform-function doesn't know to handle. - -One can, however, use empty mime-types and global transformations which should -work for many mimetypes. You can also use transforms on a different mimetype -than what they where built for, but pay attention to option usage as well as -what the transformation does to your column. - -There is a basic file called 'global.inc.php'. This function can be included by -any other transform function and provides some basic functions. - -There are 5 possible file names: - - 1. A mimetype+subtype transform: - - [mimetype]_[subtype]__[transform].inc.php - - Please not that mimetype and subtype are separated via '_', which shall not - be contained in their names. The transform function/filename may contain - only characters which cause no problems in the file system as well as the - PHP function naming convention. - - The transform function will the be called 'PMA_transform_[mimetype]_ - [subtype]__[transform]()'. - - Example: - - text_html__formatted.inc.php - PMA_transform_text_html__formatted() - 2. A mimetype (w/o subtype) transform: - - [mimetype]__[transform].inc.php - - Please note that there are no single '_' characters. The transform function - /filename may contain only characters which cause no problems in the file - system as well as the PHP function naming convention. - - The transform function will the be called 'PMA_transform_[mimetype]__ - [transform]()'. - - Example: - - text__formatted.inc.php - PMA_transform_text__formatted() - 3. A mimetype+subtype without specific transform function - - [mimetype]_[subtype].inc.php - - Please note that there are no '__' characters in the filename. Do not use - special characters in the filename causing problems with the file system. - - No transformation function is defined in the file itself. - - Example: - - text_plain.inc.php - (No function) - 4. A mimetype (w/o subtype) without specific transform function - - [mimetype].inc.php - - Please note that there are no '_' characters in the filename. Do not use - special characters in the filename causing problems with the file system. - - No transformation function is defined in the file itself. - - Example: - - text.inc.php - (No function) - 5. A global transform function with no specific mimetype - - global__[transform].inc.php - - The transform function will the be called 'PMA_transform_global__ - [transform]()'. - - Example: - - global__formatted - PMA_transform_global__formatted() - -So generally use '_' to split up mimetype and subtype, and '__' to provide a -transform function. - -All filenames containing no '__' in themselves are not shown as valid transform -functions in the dropdown. - -Please see the libraries/transformations/TEMPLATE file for adding your own -transform function. See the libraries/transformations/TEMPLATE_MIMETYPE for -adding a mimetype without a transform function. - -To create a new transform function please see libraries/transformations/ -template_generator.sh. To create a new, empty mimetype please see libraries/ -transformations/template_generator_mimetype.sh. - -A transform function always gets passed three variables: - - 1. $buffer - Contains the text inside of the column. This is the text, you - want to transform. - 2. $options - Contains any user-passed options to a transform function as an - array. - 3. $meta - Contains an object with information about your column. The data is - drawn from the output of the mysql_fetch_field() function. This means, all - object properties described on the manual page are available in this - variable and can be used to transform a column accordingly to unsigned/ - zerofill/not_null/... properties. - The $meta->mimetype variable contains the original MIME-type of the column - (i.e. 'text/plain', 'image/jpeg' etc.) - -Additionally you should also provide additional function to provide information -about the transformation to the user. This function should have same name as -transformation function just with appended _info suffix. This function accepts -no parameters and returns array with information about the transformation. -Currently following keys can be used: - -info - Long description of the transformation. - -FAQ - Frequently Asked Questions - - 1. Server - 2. Configuration - 3. Known limitations - 4. ISPs, multi-user installations - 5. Browsers or client OS - 6. Using phpMyAdmin - 7. phpMyAdmin project - 8. Security - 9. Synchronization - -Please have a look at our Link section on the official phpMyAdmin homepage for -in-depth coverage of phpMyAdmin's features and or interface. - -Server - -1.1 My server is crashing each time a specific action is required or phpMyAdmin -sends a blank page or a page full of cryptic characters to my browser, what can -I do? - -Try to set the $cfg['OBGzip'] directive to FALSE in your config.inc.php file -and the zlib.output_compression directive to Off in your php configuration -file. - -1.2 My Apache server crashes when using phpMyAdmin. - -You should first try the latest versions of Apache (and possibly MySQL). -See also the FAQ 1.1 entry about PHP bugs with output buffering. -If your server keeps crashing, please ask for help in the various Apache -support groups. - -1.3 (withdrawn). - -1.4 Using phpMyAdmin on IIS, I'm displayed the error message: "The specified -CGI application misbehaved by not returning a complete set of HTTP headers -...". - -You just forgot to read the install.txt file from the PHP distribution. Have a -look at the last message in this bug report from the official PHP bug database. - -1.5 Using phpMyAdmin on IIS, I'm facing crashes and/or many error messages with -the HTTP. - -This is a known problem with the PHP ISAPI filter: it's not so stable. Please -use instead the cookie authentication mode. - -1.6 I can't use phpMyAdmin on PWS: nothing is displayed! - -This seems to be a PWS bug. Filippo Simoncini found a workaround (at this time -there is no better fix): remove or comment the DOCTYPE declarations (2 lines) -from the scripts libraries/header.inc.php, libraries/header_printview.inc.php, -index.php, navigation.php and libraries/common.lib.php. - -1.7 How can I GZip or Bzip a dump or a CSV export? It does not seem to work. - -These features are based on the gzencode() and bzcompress() PHP functions to be -more independent of the platform (Unix/Windows, Safe Mode or not, and so on). -So, you must have Zlib/Bzip2 support (--with-zlib and --with-bz2). - -1.8 I cannot insert a text file in a table, and I get an error about safe mode -being in effect. - -Your uploaded file is saved by PHP in the "upload dir", as defined in php.ini -by the variable upload_tmp_dir (usually the system default is /tmp). -We recommend the following setup for Apache servers running in safe mode, to -enable uploads of files while being reasonably secure: - - * create a separate directory for uploads: mkdir /tmp/php - * give ownership to the Apache server's user.group: chown apache.apache /tmp/ - php - * give proper permission: chmod 600 /tmp/php - * put upload_tmp_dir = /tmp/php in php.ini - * restart Apache - -1.9 (withdrawn). - -1.10 I'm having troubles when uploading files with phpMyAdmin running on a -secure server. My browser is Internet Explorer and I'm using the Apache server. - -As suggested by "Rob M" in the phpWizard forum, add this line to your -httpd.conf: - -SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown - -It seems to clear up many problems between Internet Explorer and SSL. - -1.11 I get an 'open_basedir restriction' while uploading a file from the query -box. - -Since version 2.2.4, phpMyAdmin supports servers with open_basedir -restrictions. However you need to create temporary directory and configure it -as $cfg['TempDir']. The uploaded files will be moved there, and after execution -of your SQL commands, removed. - -1.12 I have lost my MySQL root password, what can I do? - -The MySQL manual explains how to reset the permissions. - -1.13 (withdrawn). - -1.14 (withdrawn). - -1.15 I have problems with mysql.user column names. - -In previous MySQL versions, the User and Passwordcolumns were named user and -password. Please modify your column names to align with current standards. - -1.16 I cannot upload big dump files (memory, HTTP or timeout problems). - -Starting with version 2.7.0, the import engine has been re?written and these -problems should not occur. If possible, upgrade your phpMyAdmin to the latest -version to take advantage of the new import features. - -The first things to check (or ask your host provider to check) are the values -of upload_max_filesize, memory_limit and post_max_size in the php.ini -configuration file. All of these three settings limit the maximum size of data -that can be submitted and handled by PHP. One user also said that post_max_size -and memory_limit need to be larger than upload_max_filesize. - -There exist several workarounds if your upload is too big or your hosting -provider is unwilling to change the settings: - - * Look at the $cfg['UploadDir'] feature. This allows one to upload a file to - the server via scp, ftp, or your favorite file transfer method. PhpMyAdmin - is then able to import the files from the temporary directory. More - information is available in the Configuration section of this document. - * Using a utility (such as BigDump) to split the files before uploading. We - cannot support this or any third party applications, but are aware of users - having success with it. - * If you have shell (command line) access, use MySQL to import the files - directly. You can do this by issuing the "source" command from within - MySQL: source filename.sql. - -1.17 Which MySQL versions does phpMyAdmin support? - -Since phpMyAdmin 3.0.x, only MySQL 5.0.1 and newer are supported. For older -MySQL versions, you need to use the latest 2.x branch. phpMyAdmin can connect -to your MySQL server using PHP's classic MySQL extension as well as the -improved MySQL extension (MySQLi) that is available in PHP 5.0. The latter one -should be used unless you have a good reason not to do so. -When compiling PHP, we strongly recommend that you manually link the MySQL -extension of your choice to a MySQL client library of at least the same minor -version since the one that is bundled with some PHP distributions is rather old -and might cause problems (see FAQ 1.17a). - -MariaDB is also supported (versions 5.1 and 5.2 were tested). - -Since phpMyAdmin 3.5 Drizzle is supported. - -1.17a I cannot connect to the MySQL server. It always returns the error -message, "Client does not support authentication protocol requested by server; -consider upgrading MySQL client" - -You tried to access MySQL with an old MySQL client library. The version of your -MySQL client library can be checked in your phpinfo() output. In general, it -should have at least the same minor version as your server - as mentioned in -FAQ 1.17. - -This problem is generally caused by using MySQL version 4.1 or newer. MySQL -changed the authentication hash and your PHP is trying to use the old method. -The proper solution is to use the mysqli extension with the proper client -library to match your MySQL installation. Your chosen extension is specified in -$cfg['Servers'][$i]['extension']. More information (and several workarounds) -are located in the MySQL Documentation. - -1.18 (withdrawn). - -1.19 I can't run the "display relations" feature because the script seems not -to know the font face I'm using! - -The "FPDF" library we're using for this feature requires some special files to -use font faces. -Please refers to the FPDF manual to build these files. - -1.20 I receive the error "cannot load MySQL extension, please check PHP -Configuration". - -To connect to a MySQL server, PHP needs a set of MySQL functions called "MySQL -extension". This extension may be part of the PHP distribution (compiled-in), -otherwise it needs to be loaded dynamically. Its name is probably mysql.so or -php_mysql.dll. phpMyAdmin tried to load the extension but failed. - -Usually, the problem is solved by installing a software package called -"PHP-MySQL" or something similar. - -1.21 I am running the CGI version of PHP under Unix, and I cannot log in using -cookie auth. - -In php.ini, set mysql.max_links higher than 1. - -1.22 I don't see the "Location of text file" field, so I cannot upload. - -This is most likely because in php.ini, your file_uploads parameter is not set -to "on". - -1.23 I'm running MySQL on a Win32 machine. Each time I create a new table the -table and column names are changed to lowercase! - -This happens because the MySQL directive lower_case_table_names defaults to 1 -(ON) in the Win32 version of MySQL. You can change this behavior by simply -changing the directive to 0 (OFF): -Just edit your my.ini file that should be located in your Windows directory and -add the following line to the group [mysqld]: - -set-variable = lower_case_table_names=0 - -Next, save the file and restart the MySQL service. You can always check the -value of this directive using the query - -SHOW VARIABLES LIKE 'lower_case_table_names'; - -1.24 (withdrawn). - -1.25 I am running Apache with mod_gzip-1.3.26.1a on Windows XP, and I get -problems, such as undefined variables when I run a SQL query. - -A tip from Jose Fandos: put a comment on the following two lines in httpd.conf, -like this: - -# mod_gzip_item_include file \.php$ -# mod_gzip_item_include mime "application/x-httpd-php.*" - -as this version of mod_gzip on Apache (Windows) has problems handling PHP -scripts. Of course you have to restart Apache. - -1.26 I just installed phpMyAdmin in my document root of IIS but I get the error -"No input file specified" when trying to run phpMyAdmin. - -This is a permission problem. Right-click on the phpmyadmin folder and choose -properties. Under the tab Security, click on "Add" and select the user -"IUSR_machine" from the list. Now set his permissions and it should work. - -1.27 I get empty page when I want to view huge page (eg. db_structure.php with -plenty of tables). - -This is a PHP bug that occur when GZIP output buffering is enabled. If you turn -off it (by $cfg['OBGzip'] = false in config.inc.php), it should work. This bug -will be fixed in PHP 5.0.0. - -1.28 My MySQL server sometimes refuses queries and returns the message -'Errorcode: 13'. What does this mean? - -This can happen due to a MySQL bug when having database / table names with -upper case characters although lower_case_table_names is set to 1. To fix this, -turn off this directive, convert all database and table names to lower case and -turn it on again. Alternatively, there's a bug-fix available starting with -MySQL 3.23.56 / 4.0.11-gamma. - -1.29 When I create a table or modify a column, I get an error and the columns -are duplicated. - -It is possible to configure Apache in such a way that PHP has problems -interpreting .php files. - -The problems occur when two different (and conflicting) set of directives are -used: - -SetOutputFilter PHP -SetInputFilter PHP - -and - -AddType application/x-httpd-php .php - -In the case we saw, one set of directives was in /etc/httpd/conf/httpd.conf, -while the other set was in /etc/httpd/conf/addon-modules/php.conf. -The recommended way is with AddType, so just comment out the first set of lines -and restart Apache: - -#SetOutputFilter PHP -#SetInputFilter PHP - -1.30 I get the error "navigation.php: Missing hash". - -This problem is known to happen when the server is running Turck MMCache but -upgrading MMCache to version 2.3.21 solves the problem. - -1.31 Does phpMyAdmin support php5? - -Yes. - -Since release 3.0 only PHP 5.2 and newer. For older PHP versions 2.9 branch is -still maintained. - -1.32 Can I use HTTP authentication with IIS? - -Yes. This procedure was tested with phpMyAdmin 2.6.1, PHP 4.3.9 in ISAPI mode -under IIS 5.1. - - 1. In your php.ini file, set cgi.rfc2616_headers = 0 - 2. In Web Site Properties -> File/Directory Security -> Anonymous Access - dialog box, check the Anonymous access checkbox and uncheck any other - checkboxes (i.e. uncheck Basic authentication, Integrated Windows - authentication, and Digest if it's enabled.) Click OK. - 3. In Custom Errors, select the range of 401;1 through 401;5 and click the Set - to Default button. - -1.33 (withdrawn). - -1.34 Can I access directly to database or table pages? - -Yes. Out of the box, you can use URLs like http://server/phpMyAdmin/index.php? -server=X&db=database&table=table&target=script. For server you use the server -number which refers to the order of the server paragraph in config.inc.php. -Table and script parts are optional. If you want http://server/phpMyAdmin/ -database[/table][/script] URLs, you need to do some configuration. Following -lines apply only for Apache web server. First make sure, that you have enabled -some features within global configuration. You need Options FollowSymLinks and -AllowOverride FileInfo enabled for directory where phpMyAdmin is installed and -you need mod_rewrite to be enabled. Then you just need to create following -.htaccess file in root folder of phpMyAdmin installation (don't forget to -change directory name inside of it): - -RewriteEngine On -RewriteBase /path_to_phpMyAdmin -RewriteRule ^([a-zA-Z0-9_]+)/([a-zA-Z0-9_]+)/([a-z_]+\.php)$ index.php?db=$1&table=$2&target=$3 [R] -RewriteRule ^([a-zA-Z0-9_]+)/([a-z_]+\.php)$ index.php?db=$1&target=$2 [R] -RewriteRule ^([a-zA-Z0-9_]+)/([a-zA-Z0-9_]+)$ index.php?db=$1&table=$2 [R] -RewriteRule ^([a-zA-Z0-9_]+)$ index.php?db=$1 [R] - -1.35 Can I use HTTP authentication with Apache CGI? - -Yes. However you need to pass authentication variable to CGI using following -rewrite rule: - -RewriteEngine On -RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization},L] - -1.36 I get an error "500 Internal Server Error". - -There can be many explanations to this and a look at your server's error log -file might give a clue. - -1.37 I run phpMyAdmin on cluster of different machines and password encryption -in cookie auth doesn't work. - -If your cluster consist of different architectures, PHP code used for -encryption/decryption won't work correct. This is caused by use of pack/unpack -functions in code. Only solution is to use mcrypt extension which works fine in -this case. - -1.38 Can I use phpMyAdmin on a server on which Suhosin is enabled? - -Yes but the default configuration values of Suhosin are known to cause problems -with some operations, for example editing a table with many columns and no -primary key or with textual primary key. - -Suhosin configuration might lead to malfunction in some cases and it can not be -fully avoided as phpMyAdmin is kind of application which needs to transfer big -amounts of columns in single HTTP request, what is something what Suhosin tries -to prevent. Generally all suhosin.request.*, suhosin.post.* and suhosin.get.* -directives can have negative effect on phpMyAdmin usability. You can always -find in your error logs which limit did cause dropping of variable, so you can -diagnose the problem and adjust matching configuration variable. - -The default values for most Suhosin configuration options will work in most -scenarios, however you might want to adjust at least following parameters: - - * suhosin.request.max_vars should be increased (eg. 2048) - * suhosin.post.max_vars should be increased (eg. 2048) - * suhosin.request.max_array_index_length should be increased (eg. 256) - * suhosin.post.max_array_index_length should be increased (eg. 256) - * suhosin.request.max_totalname_length should be increased (eg. 8192) - * suhosin.post.max_totalname_length should be increased (eg. 8192) - * suhosin.get.max_value_length should be increased (eg. 1024) - * suhosin.sql.bailout_on_error needs to be disabled (the default) - * suhosin.log.* should not include SQL, otherwise you get big slowdown - -You can also disable the warning using the SuhosinDisableWarning directive. - -1.39 When I try to connect via https, I can log in, but then my connection is -redirected back to http. What can cause this behavior? - -Be sure that you have enabled SSLOptions and StdEnvVars in your Apache -configuration. See http://httpd.apache.org/docs/2.0/mod/mod_ssl.html#ssloptions -. - -1.40 When accessing phpMyAdmin via an Apache reverse proxy, cookie login does -not work. - -To be able to use cookie auth Apache must know that it has to rewrite the -set-cookie headers. -Example from the Apache 2.2 documentation: - -ProxyPass /mirror/foo/ http://backend.example.com/ -ProxyPassReverse /mirror/foo/ http://backend.example.com/ -ProxyPassReverseCookieDomain backend.example.com public.example.com -ProxyPassReverseCookiePath / /mirror/foo/ - -Note: if the backend url looks like http://host/~user/phpmyadmin, the tilde (~) -must be url encoded as %7E in the ProxyPassReverse* lines. This is not specific -to phpmyadmin, it's just the behavior of Apache. - -ProxyPass /mirror/foo/ http://backend.example.com/~user/phpmyadmin -ProxyPassReverse /mirror/foo/ -http://backend.example.com/%7Euser/phpmyadmin -ProxyPassReverseCookiePath /%7Euser/phpmyadmin /mirror/foo - -See http://httpd.apache.org/docs/2.2/mod/mod_proxy.html for more details. - -1.41 When I view a database and ask to see its privileges, I get an error about -an unknown column. - -The MySQL server's privilege tables are not up to date, you need to run the -mysql_upgrade command on the server. - -1.42 How can I prevent robots from accessing phpMyAdmin? - -You can add various rules to .htaccess to filter access based on user agent -field. This is quite easy to circumvent, but could prevent at least some robots -accessing your installation. - -RewriteEngine on - -# Allow only GET and POST verbs -RewriteCond %{REQUEST_METHOD} !^(GET|POST)$ [NC,OR] - -# Ban Typical Vulnerability Scanners and others -# Kick out Script Kiddies -RewriteCond %{HTTP_USER_AGENT} ^(java|curl|wget).* [NC,OR] -RewriteCond %{HTTP_USER_AGENT} ^.*(libwww-perl|curl|wget|python|nikto|wkito|pikto|scan|acunetix).* [NC,OR] -RewriteCond %{HTTP_USER_AGENT} ^.*(winhttp|HTTrack|clshttp|archiver|loader|email|harvest|extract|grab|miner).* [NC,OR] - -# Ban Search Engines, Crawlers to your administrative panel -# No reasons to access from bots -# Ultimately Better than the useless robots.txt -# Did google respect robots.txt? -# Try google: intitle:phpMyAdmin intext:"Welcome to phpMyAdmin *.*.*" intext:"Log in" -wiki -forum -forums -questions intext:"Cookies must be enabled" -RewriteCond %{HTTP_USER_AGENT} ^.*(AdsBot-Google|ia_archiver|Scooter|Ask.Jeeves|Baiduspider|Exabot|FAST.Enterprise.Crawler|FAST-WebCrawler|www\.neomo\.de|Gigabot|Mediapartners-Google|Google.Desktop|Feedfetcher-Google|Googlebot|heise-IT-Markt-Crawler|heritrix|ibm.com\cs/crawler|ICCrawler|ichiro|MJ12bot|MetagerBot|msnbot-NewsBlogs|msnbot|msnbot-media|NG-Search|lucene.apache.org|NutchCVS|OmniExplorer_Bot|online.link.validator|psbot0|Seekbot|Sensis.Web.Crawler|SEO.search.Crawler|Seoma.\[SEO.Crawler\]|SEOsearch|Snappy|www.urltrends.com|www.tkl.iis.u-tokyo.ac.jp/~crawler|SynooBot|crawleradmin.t-info@telekom.de|TurnitinBot|voyager|W3.SiteSearch.Crawler|W3C-checklink|W3C_Validator|www.WISEnutbot.com|yacybot|Yahoo-MMCrawler|Yahoo\!.DE.Slurp|Yahoo\!.Slurp|YahooSeeker).* [NC] -RewriteRule .* - [F] - -Configuration - -2.1 The error message "Warning: Cannot add header information - headers already -sent by ..." is displayed, what's the problem? - -Edit your config.inc.php file and ensure there is nothing (I.E. no blank lines, -no spaces, no characters...) neither before the tag at the end. We also got a report from a user under -IIS, that used a zipped distribution kit: the file libraries/Config.class.php -contained an end-of-line character (hex 0A) at the end; removing this character -cleared his errors. - -2.2 phpMyAdmin can't connect to MySQL. What's wrong? - -Either there is an error with your PHP setup or your username/password is -wrong. Try to make a small script which uses mysql_connect and see if it works. -If it doesn't, it may be you haven't even compiled MySQL support into PHP. - -2.3 The error message "Warning: MySQL Connection Failed: Can't connect to local -MySQL server through socket '/tmp/mysql.sock' (111) ..." is displayed. What can -I do? - -For RedHat users, Harald Legner suggests this on the mailing list: - -On my RedHat-Box the socket of MySQL is /var/lib/mysql/mysql.sock. In your -php.ini you will find a line - -mysql.default_socket = /tmp/mysql.sock - -change it to - -mysql.default_socket = /var/lib/mysql/mysql.sock - -Then restart apache and it will work. - -Here is a fix suggested by Brad Ummer: - - * First, you need to determine what socket is being used by MySQL. - To do this, telnet to your server and go to the MySQL bin directory. In - this directory there should be a file named mysqladmin. Type ./mysqladmin - variables, and this should give you a bunch of info about your MySQL - server, including the socket (/tmp/mysql.sock, for example). - * Then, you need to tell PHP to use this socket. - To do this in phpMyAdmin, you need to complete the socket information in - the config.inc.php. - For example: $cfg['Servers'][$i]['socket'] = '/tmp/mysql.sock'; - - Please also make sure that the permissions of this file allow to be - readable by your webserver (i.e. '0755'). - -Have also a look at the corresponding section of the MySQL documentation. - -2.4 Nothing is displayed by my browser when I try to run phpMyAdmin, what can I -do? - -Try to set the $cfg['OBGZip'] directive to FALSE in the phpMyAdmin -configuration file. It helps sometime. -Also have a look at your PHP version number: if it contains "b" or "alpha" it -means you're running a testing version of PHP. That's not a so good idea, -please upgrade to a plain revision. - -2.5 Each time I want to insert or change a row or drop a database or a table, -an error 404 (page not found) is displayed or, with HTTP or cookie -authentication, I'm asked to log in again. What's wrong? - -Check the value you set for the $cfg['PmaAbsoluteUri'] directive in the -phpMyAdmin configuration file. - -2.6 I get an "Access denied for user: 'root@localhost' (Using password: YES) -"-error when trying to access a MySQL-Server on a host which is port-forwarded -for my localhost. - -When you are using a port on your localhost, which you redirect via -port-forwarding to another host, MySQL is not resolving the localhost as -expected. -Erik Wasser explains: The solution is: if your host is "localhost" MySQL (the -command line tool mysql as well) always tries to use the socket connection for -speeding up things. And that doesn't work in this configuration with port -forwarding. -If you enter "127.0.0.1" as hostname, everything is right and MySQL uses the -TCP connection. - -2.7 Using and creating themes - -Themes are configured with $cfg['ThemePath'], $cfg['ThemeManager'] and $cfg -['ThemeDefault']. - -Under $cfg['ThemePath'], you should not delete the directory "original" or its -underlying structure, because this is the system theme used by phpMyAdmin. -"original" contains all images and styles, for backwards compatibility and for -all themes that would not include images or css-files. - -If $cfg['ThemeManager'] is enabled, you can select your favorite theme on the -main page. Your selected theme will be stored in a cookie. - - -To create a theme: - - * make a new subdirectory (for example "your_theme_name") under $cfg - ['ThemePath'] (by default themes) - * copy the files and directories from "original" to "your_theme_name" - * edit the css-files in "your_theme_name/css" - * put your new images in "your_theme_name/img" - * edit layout.inc.php in "your_theme_name" - * edit info.inc.php in "your_theme_name" to contain your chosen theme name, - that will be visible in user interface - * make a new screenshot of your theme and save it under "your_theme_name/ - screen.png" - -In theme directory there is file info.inc.php which contains theme verbose -name, theme generation and theme version. These versions and generations are -enumerated from 1 and do not have any direct dependence on phpMyAdmin version. -Themes within same generation should be backwards compatible - theme with -version 2 should work in phpMyAdmin requiring version 1. Themes with different -generation are incompatible. - -If you do not want to use your own symbols and buttons, remove the directory -"img" in "your_theme_name". phpMyAdmin will use the default icons and buttons -(from the system-theme "original"). - -2.8 I get "Missing parameters" errors, what can I do? - -Here are a few points to check: - - * In config.inc.php, try to leave the $cfg['PmaAbsoluteUri'] directive empty. - See also FAQ 4.7. - * Maybe you have a broken PHP installation or you need to upgrade your Zend - Optimizer. See http://bugs.php.net/bug.php?id=31134. - * If you are using Hardened PHP with the ini directive - varfilter.max_request_variables set to the default (200) or another low - value, you could get this error if your table has a high number of columns. - Adjust this setting accordingly. (Thanks to Klaus Dorninger for the hint). - * In the php.ini directive arg_separator.input, a value of ";" will cause - this error. Replace it with "&;". - * If you are using Hardened-PHP, you might want to increase request limits. - * The directory specified in the php.ini directive session.save_path does not - exist or is read-only. - -2.9 Seeing an upload progress bar - -To be able to see a progress bar during your uploads, your server must have -either the APC extension or the uploadprogress one. Moreover, the JSON -extension has to be enabled in your PHP. - -If using APC, you must set apc.rfc1867 to on in your php.ini. - -Known limitations - -3.1 When using HTTP authentication, a user who logged out can not log in again -in with the same nick. - -This is related to the authentication mechanism (protocol) used by phpMyAdmin. -To bypass this problem: just close all the opened browser windows and then go -back to phpMyAdmin. You should be able to log in again. - -3.2 When dumping a large table in compressed mode, I get a memory limit error -or a time limit error. - -Compressed dumps are built in memory and because of this are limited to php's -memory limit. For GZip/BZip2 exports this can be overcome since 2.5.4 using -$cfg['CompressOnFly'] (enabled by default). Zip exports can not be handled this -way, so if you need Zip files for larger dump, you have to use another way. - -3.3 With InnoDB tables, I lose foreign key relationships when I rename a table -or a column. - -This is an InnoDB bug, see http://bugs.mysql.com/bug.php?id=21704. - -3.4 I am unable to import dumps I created with the mysqldump tool bundled with -the MySQL server distribution. - -The problem is that older versions of mysqldump created invalid comments like -this: - --- MySQL dump 8.22 --- --- Host: localhost Database: database ---------------------------------------------------------- --- Server version 3.23.54 - -The invalid part of the code is the horizontal line made of dashes that appears -once in every dump created with mysqldump. If you want to run your dump you -have to turn it into valid MySQL. This means, you have to add a whitespace -after the first two dashes of the line or add a # before it: --- ------------------------------------------------------- -or -#--------------------------------------------------------- - -3.5 When using nested folders there are some multiple hierarchies displayed in -a wrong manner?! ($cfg['LeftFrameTableSeparator']) - -Please note that you should not use the separating string multiple times -without any characters between them, or at the beginning/end of your table -name. If you have to, think about using another TableSeparator or disabling -that feature - -3.6 What is currently not supported in phpMyAdmin about InnoDB? - -In Relation view, being able to choose a table in another database, or having -more than one index column in the foreign key. - -In Query-by-example (Query), automatic generation of the query LEFT JOIN from -the foreign table. - - -3.7 I have table with many (100+) columns and when I try to browse table I get -series of errors like "Warning: unable to parse url". How can this be fixed? - -Your table neither have a primary key nor an unique one, so we must use a long -expression to identify this row. This causes problems to parse_url function. -The workaround is to create a primary or unique key. - -3.8 I cannot use (clickable) HTML-forms in columns where I put a -MIME-Transformation onto! - -Due to a surrounding form-container (for multi-row delete checkboxes), no -nested forms can be put inside the table where phpMyAdmin displays the results. -You can, however, use any form inside of a table if keep the parent -form-container with the target to tbl_row_delete.php and just put your own -input-elements inside. If you use a custom submit input field, the form will -submit itself to the displaying page again, where you can validate the -$HTTP_POST_VARS in a transformation. For a tutorial on how to effectively use -transformations, see our Link section on the official phpMyAdmin-homepage. - -3.9 I get error messages when using "--sql_mode=ANSI" for the MySQL server - -When MySQL is running in ANSI-compatibility mode, there are some major -differences in how SQL is structured (see http://dev.mysql.com/doc/mysql/en/ -ansi-mode.html). Most important of all, the quote-character (") is interpreted -as an identifier quote character and not as a string quote character, which -makes many internal phpMyAdmin operations into invalid SQL statements. There is -no workaround to this behaviour. News to this item will be posted in Bug report -#816858 - -3.10 Homonyms and no primary key: When the results of a SELECT display more -that one column with the same value (for example SELECT lastname from employees -where firstname like 'A%' and two "Smith" values are displayed), if I click -Edit I cannot be sure that I am editing the intended row. - -Please make sure that your table has a primary key, so that phpMyAdmin can use -it for the Edit and Delete links. - -3.11 The number of rows for InnoDB tables is not correct. - -phpMyAdmin uses a quick method to get the row count, and this method only -returns an approximate count in the case of InnoDB tables. See $cfg -['MaxExactCount'] for a way to modify those results, but this could have a -serious impact on performance. - -3.12 (withdrawn). - -3.13 I get an error when entering USE followed by a db name containing an -hyphen. - -The tests I have made with MySQL 5.1.49 shows that the API does not accept this -syntax for the USE command. - -3.14 I am not able to browse a table when I don't have the right to SELECT one -of the columns. - -This has been a known limitation of phpMyAdmin since the beginning and it's not -likely to be solved in the future. - -3.15 (withdrawn). - -3.16 (withdrawn). - -3.17 (withdrawn). - -3.18 When I import a CSV file that contains multiple tables, they are lumped -together into a single table. - -There is no reliable way to differentiate tables in CSV format. For the time -being, you will have to break apart CSV files containing multiple tables. - -3.19 When I import a file and have phpMyAdmin determine the appropriate data -structure it only uses int, decimal, and varchar types. - -Currently, the import type-detection system can only assign these MySQL types -to columns. In future, more will likely be added but for the time being you -will have to edit the structure to your liking post-import. - -Also, you should note the fact that phpMyAdmin will use the size of the largest -item in any given column as the column size for the appropriate type. If you -know you will be adding larger items to that column then you should manually -adjust the column sizes accordingly. This is done for the sake of efficiency. - -ISPs, multi-user installations - -4.1 I'm an ISP. Can I setup one central copy of phpMyAdmin or do I need to -install it for each customer. - -Since version 2.0.3, you can setup a central copy of phpMyAdmin for all your -users. The development of this feature was kindly sponsored by NetCologne GmbH. -This requires a properly setup MySQL user management and phpMyAdmin HTTP or -cookie authentication. See the install section on "Using HTTP authentication". - -4.2 What's the preferred way of making phpMyAdmin secure against evil access. - -This depends on your system. -If you're running a server which cannot be accessed by other people, it's -sufficient to use the directory protection bundled with your webserver (with -Apache you can use .htaccess files, for example). -If other people have telnet access to your server, you should use phpMyAdmin's -HTTP or cookie authentication features. - -Suggestions: - - * Your config.inc.php file should be chmod 660. - * All your phpMyAdmin files should be chown -R phpmy.apache, where phpmy is a - user whose password is only known to you, and apache is the group under - which Apache runs. - * Follow security recommendations for PHP and your webserver. - -4.3 I get errors about not being able to include a file in /lang or in / -libraries. - -Check php.ini, or ask your sysadmin to check it. The include_path must contain -"." somewhere in it, and open_basedir, if used, must contain "." and "./lang" -to allow normal operation of phpMyAdmin. - -4.4 phpMyAdmin always gives "Access denied" when using HTTP authentication. - -This could happen for several reasons: - - * $cfg['Servers'][$i]['controluser'] and/or $cfg['Servers'][$i] - ['controlpass'] are wrong. - * The username/password you specify in the login dialog are invalid. - * You have already setup a security mechanism for the phpMyAdmin-directory, - eg. a .htaccess file. This would interfere with phpMyAdmin's - authentication, so remove it. - -4.5 Is it possible to let users create their own databases? - -Starting with 2.2.5, in the user management page, you can enter a wildcard -database name for a user (for example "joe%"), and put the privileges you want. -For example, adding SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, INDEX, ALTER -would let a user create/manage his/her database(s). - -4.6 How can I use the Host-based authentication additions? - -If you have existing rules from an old .htaccess file, you can take them and -add a username between the 'deny'/'allow' and 'from' strings. Using the -username wildcard of '%' would be a major benefit here if your installation is -suited to using it. Then you can just add those updated lines into the $cfg -['Servers'][$i]['AllowDeny']['rules'] array. - -If you want a pre-made sample, you can try this fragment. It stops the 'root' -user from logging in from any networks other than the private network IP -blocks. - -//block root from logging in except from the private networks -$cfg['Servers'][$i]['AllowDeny']['order'] = 'deny,allow'; -$cfg['Servers'][$i]['AllowDeny']['rules'] = array( - 'deny root from all', - 'allow root from localhost', - 'allow root from 10.0.0.0/8', - 'allow root from 192.168.0.0/16', - 'allow root from 172.16.0.0/12', - ); - -4.7 Authentication window is displayed more than once, why? - -This happens if you are using a URL to start phpMyAdmin which is different than -the one set in your $cfg['PmaAbsoluteUri']. For example, a missing "www", or -entering with an IP address while a domain name is defined in the config file. - -4.8 Which parameters can I use in the URL that starts phpMyAdmin? - -When starting phpMyAdmin, you can use the db, pma_username, pma_password and -server parameters. This last one can contain either the numeric host index -(from $i of the configuration file) or one of the host names present in the -configuration file. Using pma_username and pma_password has been tested along -with the usage of 'cookie' auth_type. - -Browsers or client OS - -5.1 I get an out of memory error, and my controls are non-functional, when -trying to create a table with more than 14 columns. - -We could reproduce this problem only under Win98/98SE. Testing under WinNT4 or -Win2K, we could easily create more than 60 columns. -A workaround is to create a smaller number of columns, then come back to your -table properties and add the other columns. - -5.2 With Xitami 2.5b4, phpMyAdmin won't process form fields. - -This is not a phpMyAdmin problem but a Xitami known bug: you'll face it with -each script/website that use forms. -Upgrade or downgrade your Xitami server. - -5.3 I have problems dumping tables with Konqueror (phpMyAdmin 2.2.2). - -With Konqueror 2.1.1: plain dumps, zip and GZip dumps work ok, except that the -proposed file name for the dump is always 'tbl_dump.php'. Bzip2 dumps don't -seem to work. -With Konqueror 2.2.1: plain dumps work; zip dumps are placed into the user's -temporary directory, so they must be moved before closing Konqueror, or else -they disappear. GZip dumps give an error message. -Testing needs to be done for Konqueror 2.2.2. - -5.4 I can't use the cookie authentication mode because Internet Explorer never -stores the cookies. - -MS Internet Explorer seems to be really buggy about cookies, at least till -version 6. - -5.5 In Internet Explorer 5.0, I get JavaScript errors when browsing my rows. - -Upgrade to at least Internet Explorer 5.5 SP2. - -5.6 In Internet Explorer 5.0, 5.5 or 6.0, I get an error (like "Page not -found") when trying to modify a row in a table with many columns, or with a -text column - -Your table neither have a primary key nor an unique one, so we must use a long -URL to identify this row. There is a limit on the length of the URL in those -browsers, and this not happen in Netscape, for example. The workaround is to -create a primary or unique key, or use another browser. - -5.7 I refresh (reload) my browser, and come back to the welcome page. - -Some browsers support right-clicking into the frame you want to refresh, just -do this in the right frame. - -5.8 With Mozilla 0.9.7 I have problems sending a query modified in the query -box. - -Looks like a Mozilla bug: 0.9.6 was OK. We will keep an eye on future Mozilla -versions. - -5.9 With Mozilla 0.9.? to 1.0 and Netscape 7.0-PR1 I can't type a whitespace in -the SQL-Query edit area: the page scrolls down. - -This is a Mozilla bug (see bug #26882 at BugZilla). - -5.10 With Netscape 4.75 I get empty rows between each row of data in a CSV -exported file. - -This is a known Netscape 4.75 bug: it adds some line feeds when exporting data -in octet-stream mode. Since we can't detect the specific Netscape version, we -cannot workaround this bug. - -5.11 Extended-ASCII characters like German umlauts are displayed wrong. - -Please ensure that you have set your browser's character set to the one of the -language file you have selected on phpMyAdmin's start page. Alternatively, you -can try the auto detection mode that is supported by the recent versions of the -most browsers. - -5.12 Mac OS X: Safari browser changes special characters to "?". - -This issue has been reported by a OS X user, who adds that Chimera, Netscape -and Mozilla do not have this problem. - -5.13 With Internet Explorer 5.5 or 6, and HTTP authentication type, I cannot -manage two servers: I log in to the first one, then the other one, but if I -switch back to the first, I have to log in on each operation. - -This is a bug in Internet Explorer, other browsers do not behave this way. - -5.14 Using Opera6, I can manage to get to the authentication, but nothing -happens after that, only a blank screen. - -Please upgrade to Opera7 at least. - -5.15 I have display problems with Safari. - -Please upgrade to at least version 1.2.3. - -5.16 With Internet Explorer, I get "Access is denied" Javascript errors. Or I -cannot make phpMyAdmin work under Windows. - -Please check the following points: - - * Maybe you have defined your PmaAbsoluteUri setting in config.inc.php to an - IP address and you are starting phpMyAdmin with a URL containing a domain - name, or the reverse situation. - * Security settings in IE and/or Microsoft Security Center are too high, thus - blocking scripts execution. - * The Windows Firewall is blocking Apache and MySQL. You must allow HTTP - ports (80 or 443) and MySQL port (usually 3306) in the "in" and "out" - directions. - -5.17 With Firefox, I cannot delete rows of data or drop a database. - -Many users have confirmed that the Tabbrowser Extensions plugin they installed -in their Firefox is causing the problem. - -5.18 With Konqueror 4.2.x an invalid LIMIT clause is generated when I browse a -table. - -This happens only when both of these conditions are met: using the http -authentication mode and register_globals being set to On on the server. It -seems to be a browser-specific problem; meanwhile use the cookie authentication -mode. - -5.19 I get JavaScript errors in my browser. - -Issues have been reported with some combinations of browser extensions. To -troubleshoot, disable all extensions then clear your browser cache to see if -the problem goes away. - -Using phpMyAdmin - -6.1 I can't insert new rows into a table / I can't create a table - MySQL -brings up a SQL-error. - -Examine the SQL error with care. Often the problem is caused by specifying a -wrong column-type. -Common errors include: - - * Using VARCHAR without a size argument - * Using TEXT or BLOB with a size argument - -Also, look at the syntax chapter in the MySQL manual to confirm that your -syntax is correct. - -6.2 When I create a table, I set an index for two columns and phpMyAdmin -generates only one index with those two columns. - -This is the way to create a multi-columns index. If you want two indexes, -create the first one when creating the table, save, then display the table -properties and click the Index link to create the other index. - -6.3 How can I insert a null value into my table? - -Since version 2.2.3, you have a checkbox for each column that can be null. -Before 2.2.3, you had to enter "null", without the quotes, as the column's -value. Since version 2.5.5, you have to use the checkbox to get a real NULL -value, so if you enter "NULL" this means you want a literal NULL in the column, -and not a NULL value (this works in PHP4). - -6.4 How can I backup my database or table? - -Click on a database or table name in the left frame, the properties will be -displayed. Then on the menu, click "Export", you can dump the structure, the -data, or both. This will generate standard SQL statements that can be used to -recreate your database/table. - -You will need to choose "Save as file", so that phpMyAdmin can transmit the -resulting dump to your station. Depending on your PHP configuration, you will -see options to compress the dump. See also the $cfg['ExecTimeLimit'] -configuration variable. - -For additional help on this subject, look for the word "dump" in this document. - -6.5 How can I restore (upload) my database or table using a dump? How can I run -a ".sql" file? - -Click on a database name in the left frame, the properties will be displayed. -Select "Import" from the list of tabs in the right?hand frame (or "SQL" if your -phpMyAdmin version is previous to 2.7.0). In the "Location of the text file" -section, type in the path to your dump filename, or use the Browse button. Then -click Go. - -With version 2.7.0, the import engine has been re?written, if possible it is -suggested that you upgrade to take advantage of the new features. - -For additional help on this subject, look for the word "upload" in this -document. - -6.6 How can I use the relation table in Query-by-example? - -Here is an example with the tables persons, towns and countries, all located in -the database mydb. If you don't have a pma_relation table, create it as -explained in the configuration section. Then create the example tables: - -CREATE TABLE REL_countries ( - country_code char(1) NOT NULL default '', - description varchar(10) NOT NULL default '', - PRIMARY KEY (country_code) -) TYPE=MyISAM; - -INSERT INTO REL_countries VALUES ('C', 'Canada'); - -CREATE TABLE REL_persons ( - id tinyint(4) NOT NULL auto_increment, - person_name varchar(32) NOT NULL default '', - town_code varchar(5) default '0', - country_code char(1) NOT NULL default '', - PRIMARY KEY (id) -) TYPE=MyISAM; - -INSERT INTO REL_persons VALUES (11, 'Marc', 'S', ''); -INSERT INTO REL_persons VALUES (15, 'Paul', 'S', 'C'); - -CREATE TABLE REL_towns ( - town_code varchar(5) NOT NULL default '0', - description varchar(30) NOT NULL default '', - PRIMARY KEY (town_code) -) TYPE=MyISAM; - -INSERT INTO REL_towns VALUES ('S', 'Sherbrooke'); -INSERT INTO REL_towns VALUES ('M', 'Montr?al'); - -To setup appropriate links and display information: - - * on table "REL_persons" click Structure, then Relation view - * in Links, for "town_code" choose "REL_towns->code" - * in Links, for "country_code" choose "REL_countries->country_code" - * on table "REL_towns" click Structure, then Relation view - * in "Choose column to display", choose "description" - * repeat the two previous steps for table "REL_countries" - -Then test like this: - - * Click on your db name in the left frame - * Choose "Query" - * Use tables: persons, towns, countries - * Click "Update query" - * In the columns row, choose persons.person_name and click the "Show" tickbox - * Do the same for towns.description and countries.descriptions in the other 2 - columns - * Click "Update query" and you will see in the query box that the correct - joins have been generated - * Click "Submit query" - -6.7 How can I use the "display column" feature? - -Starting from the previous example, create the pma_table_info as explained in -the configuration section, then browse your persons table, and move the mouse -over a town code or country code. - -See also FAQ 6.21 for an additional feature that "display column" enables: -drop-down list of possible values. - -6.8 How can I produce a PDF schema of my database? - -First the configuration variables "relation", "table_coords" and "pdf_pages" -have to be filled in. - -Then you need to think about your schema layout. Which tables will go on which -pages? - - * Select your database in the left frame. - * Choose "Operations" in the navigation bar at the top. - * Choose "Edit PDF Pages" near the bottom of the page. - * Enter a name for the first PDF page and click Go. If you like, you can use - the "automatic layout," which will put all your linked tables onto the new - page. - * Select the name of the new page (making sure the Edit radio button is - selected) and click Go. - * Select a table from the list, enter its coordinates and click Save. - Coordinates are relative; your diagram will be automatically scaled to fit - the page. When initially placing tables on the page, just pick any - coordinates -- say, 50x50. After clicking Save, you can then use the - graphical editor to position the element correctly. - * When you'd like to look at your PDF, first be sure to click the Save button - beneath the list of tables and coordinates, to save any changes you made - there. Then scroll all the way down, select the PDF options you want, and - click Go. - * Internet Explorer for Windows may suggest an incorrect filename when you - try to save a generated PDF. When saving a generated PDF, be sure that the - filename ends in ".pdf", for example "schema.pdf". Browsers on other - operating systems, and other browsers on Windows, do not have this problem. - -6.9 phpMyAdmin is changing the type of one of my columns! - -No, it's MySQL that is doing silent column type changing. - -6.10 When creating a privilege, what happens with underscores in the database -name? - -If you do not put a backslash before the underscore, this is a wildcard grant, -and the underscore means "any character". So, if the database name is -"john_db", the user would get rights to john1db, john2db ... - -If you put a backslash before the underscore, it means that the database name -will have a real underscore. - -6.11 What is the curious symbol ? in the statistics pages? - -It means "average". - -6.12 I want to understand some Export options. - -Structure: - - * "Add DROP TABLE" will add a line telling MySQL to drop the table, if it - already exists during the import. It does NOT drop the table after your - export, it only affects the import file. - * "If Not Exists" will only create the table if it doesn't exist. Otherwise, - you may get an error if the table name exists but has a different - structure. - * "Add AUTO_INCREMENT value" ensures that AUTO_INCREMENT value (if any) will - be included in backup. - * "Enclose table and column names with backquotes" ensures that column and - table names formed with special characters are protected. - * "Add into comments" includes column comments, relations, and MIME types set - in the pmadb in the dump as SQL comments (/* xxx */). - -Data: - - * "Complete inserts" adds the column names on every INSERT command, for - better documentation (but resulting file is bigger). - * "Extended inserts" provides a shorter dump file by using only once the - INSERT verb and the table name. - * "Delayed inserts" are best explained in the MySQL manual. - * "Ignore inserts" treats errors as a warning instead. Again, more info is - provided in the MySQL manual, but basically with this selected, invalid - values are adjusted and inserted rather than causing the entire statement - to fail. - -6.13 I would like to create a database with a dot in its name. - -This is a bad idea, because in MySQL the syntax "database.table" is the normal -way to reference a database and table name. Worse, MySQL will usually let you -create a database with a dot, but then you cannot work with it, nor delete it. - -6.14 How do I set up the SQL Validator? - -To use SQL Validator, you need PHP with XML, PCRE and PEAR support. In addition -you need a SOAP support, either as a PHP extension or as a PEAR SOAP module. - -To install PEAR SOAP module, run "pear install Net_Socket Net_URL HTTP_Request -Mail_Mime Net_DIME SOAP" to get the necessary PEAR modules for usage. - -If you use the Validator, you should be aware that any SQL statement you submit -will be stored anonymously (database/table/column names, strings, numbers -replaced with generic values). The Mimer SQL Validator itself, is ? 2001 -Upright Database Technology. We utilize it as free SOAP service. - -6.15 I want to add a BLOB column and put an index on it, but MySQL says "BLOB -column '...' used in key specification without a key length". - -The right way to do this, is to create the column without any indexes, then -display the table structure and use the "Create an index" dialog. On this page, -you will be able to choose your BLOB column, and set a size to the index, which -is the condition to create an index on a BLOB column. - -6.16 How can I simply move in page with plenty editing fields? - -You can use Ctrl+arrows (Option+Arrows in Safari) for moving on most pages with -many editing fields (table structure changes, row editing, etc.). - -6.17 Transformations: I can't enter my own mimetype! WTF is this feature then -useful for? - -Slow down :). Defining mimetypes is of no use, if you can't put transformations -on them. Otherwise you could just put a comment on the column. Because entering -your own mimetype will cause serious syntax checking issues and validation, -this introduces a high-risk false-user-input situation. Instead you have to -initialize mimetypes using functions or empty mimetype definitions. -Plus, you have a whole overview of available mimetypes. Who knows all those -mimetypes by heart so he/she can enter it at will? - -6.18 Bookmarks: Where can I store bookmarks? Why can't I see any bookmarks -below the query box? What is this variable for? - -Any query you have executed can be stored as a bookmark on the page where the -results are displayed. You will find a button labeled 'Bookmark this query' -just at the end of the page. -As soon as you have stored a bookmark, it is related to the database you run -the query on. You can now access a bookmark dropdown on each page, the query -box appears on for that database. - -Since phpMyAdmin 2.5.0 you are also able to store variables for the bookmarks. -Just use the string /*[VARIABLE]*/ anywhere in your query. Everything which is -put into the value input box on the query box page will replace the string "/* -[VARIABLE]*/" in your stored query. Just be aware of that you HAVE to create a -valid query, otherwise your query won't be even able to be stored in the -database. -Also remember, that everything else inside the /*[VARIABLE]*/ string for your -query will remain the way it is, but will be stripped of the /**/ chars. So you -can use: - -/*, [VARIABLE] AS myname */ - -which will be expanded to - -, VARIABLE as myname - -in your query, where VARIABLE is the string you entered in the input box. If an -empty string is provided, no replacements are made. - -A more complex example. Say you have stored this query: - -SELECT Name, Address FROM addresses WHERE 1 /* AND Name LIKE '%[VARIABLE]%' */ - -Say, you now enter "phpMyAdmin" as the variable for the stored query, the full -query will be: - -SELECT Name, Address FROM addresses WHERE 1 AND Name LIKE '%phpMyAdmin%' - -You can use multiple occurrences of /*[VARIABLE]*/ in a single query (that is, -multiple occurrences of the same variable). -NOTE THE ABSENCE OF SPACES inside the "/**/" construct. Any spaces inserted -there will be later also inserted as spaces in your query and may lead to -unexpected results especially when using the variable expansion inside of a -"LIKE ''" expression. -Your initial query which is going to be stored as a bookmark has to yield at -least one result row so you can store the bookmark. You may have that to work -around using well positioned "/**/" comments. - -6.19 How can I create simple L^AT[E]X document to include exported table? - -You can simply include table in your L^AT[E]X documents, minimal sample -document should look like following one (assuming you have table exported in -file table.tex): - -\documentclass{article} % or any class you want -\usepackage{longtable} % for displaying table -\begin{document} % start of document -\include{table} % including exported table -\end{document} % end of document - -6.20 I see a lot of databases which are not mine, and cannot access them. - -You have one of these global privileges: CREATE TEMPORARY TABLES, SHOW -DATABASES, LOCK TABLES. Those privileges also enable users to see all the -database names. See this bug report. - -So if your users do not need those privileges, you can remove them and their -databases list will shorten. - -6.21 In edit/insert mode, how can I see a list of possible values for a column, -based on some foreign table? - -You have to setup appropriate links between the tables, and also setup the -"display column" in the foreign table. See FAQ 6.6 for an example. Then, if -there are 100 values or less in the foreign table, a drop-down list of values -will be available. You will see two lists of values, the first list containing -the key and the display column, the second list containing the display column -and the key. The reason for this is to be able to type the first letter of -either the key or the display column. - -For 100 values or more, a distinct window will appear, to browse foreign key -values and choose one. To change the default limit of 100, see $cfg -['ForeignKeyMaxLimit']. - -6.22 Bookmarks: Can I execute a default bookmark automatically when entering -Browse mode for a table? - -Yes. If a bookmark has the same label as a table name and it's not a public -bookmark, it will be executed. - -6.23 Export: I heard phpMyAdmin can export Microsoft Excel files? - -You can use CSV for Microsoft Excel, which works out of the box. -Since phpMyAdmin 3.4.5 support for direct export to Microsoft Excel version 97 -and newer was dropped. - -6.24 Now that phpMyAdmin supports native MySQL 4.1.x column comments, what -happens to my column comments stored in pmadb? - -Automatic migration of a table's pmadb-style column comments to the native ones -is done whenever you enter Structure page for this table. - -6.25 How does BLOB streaming work in phpMyAdmin? - -For general information about BLOB streaming on MySQL, visit blobstreaming.org. -You need the following components: - - * PBMS BLOB Streaming Daemon for MySQL (0.5.15 or later) - * Streaming enabled PBXT Storage engine for MySQL (1.0.11-6 or later) - * PBMS Client Library for MySQL (0.5.15 or later) - * PBMS PHP Extension for MySQL (0.1.1 or later) - -Here are details about configuration and operation: - - 1. In config.inc.php your host should be defined with a FQDN (fully qualified - domain name) instead of "localhost". - 2. Ensure that your target table is under the PBXT storage engine and has a - LONGBLOB column (which must be nullable if you want to remove the BLOB - reference from it). - 3. When you insert or update a row in this table, put a checkmark on the - "Upload to BLOB repository" optional choice; otherwise, the upload will be - done directly in your LONGBLOB column instead of the repository. - 4. Finally when you browse your table, you'll see in your column a link to - stream your data, for example "View image". A header containing the correct - MIME-type will be sent to your browser; this MIME-type was stored at upload - time. - -6.26 How can I select a range of rows? - -Click the first row of the range, hold the shift key and click the last row of -the range. This works everywhere you see rows, for example in Browse mode or on -the Structure page. - -6.27 What format strings can I use? - -In all places where phpMyAdmin accepts format strings, you can use @VARIABLE@ -expansion and strftime format strings. The expanded variables depend on a -context (for example, if you haven't chosen a table, you can not get the table -name), but the following variables can be used: - -@HTTP_HOST@ - HTTP host that runs phpMyAdmin -@SERVER@ - MySQL server name -@VERBOSE@ - Verbose MySQL server name as defined in server configuration -@VSERVER@ - Verbose MySQL server name if set, otherwise normal -@DATABASE@ - Currently opened database -@TABLE@ - Currently opened table -@COLUMNS@ - Columns of the currently opened table -@PHPMYADMIN@ - phpMyAdmin with version - -6.28 How can I easily edit relational schema for export? - -By clicking on the button 'toggle scratchboard' on the page where you edit x/y -coordinates of those elements you can activate a scratchboard where all your -elements are placed. By clicking on an element, you can move them around in the -pre-defined area and the x/y coordinates will get updated dynamically. -Likewise, when entering a new position directly into the input field, the new -position in the scratchboard changes after your cursor leaves the input field. - -You have to click on the 'OK'-button below the tables to save the new -positions. If you want to place a new element, first add it to the table of -elements and then you can drag the new element around. - -By changing the paper size and the orientation you can change the size of the -scratchboard as well. You can do so by just changing the dropdown field below, -and the scratchboard will resize automatically, without interfering with the -current placement of the elements. - -If ever an element gets out of range you can either enlarge the paper size or -click on the 'reset' button to place all elements below each other. - -6.29 Why can't I get a chart from my query result table? - -Not every table can be put to the chart. Only tables with one, two or three -columns can be visualised as a chart. Moreover the table must be in a special -format for chart script to understand it. Currently supported formats can be -found in the wiki. - -6.30 Import: How can I import ESRI Shapefiles - -An ESRI Shapefile is actually a set of several files, where .shp file contains -geometry data and .dbf file contains data related to those geometry data. To -read data from .dbf file you need to have PHP compiled with the dBase extension -(--enable-dbase). Otherwise only geometry data will be imported. - -To upload these set of files you can use either of the following methods: - - * Configure upload directory with $cfg['UploadDir'], upload both .shp and - .dbf files with the same filename and chose the .shp file from the import - page. - - * Create a Zip archive with .shp and .dbf files and import it. For this to - work, you need to set $cfg['TempDir'] to a place where the web server user - can write (for example './tmp'). - - To create the temporary directory on a UNIX-based system, you can do: - - cd phpMyAdmin - mkdir tmp - chmod o+rwx tmp - -6.31 How do I create a relation in designer? - -To select relation, click: -[relation icon] -The display column is shown in pink. To set/unset a column as the display -column, click the "Choose column to display" icon, then click on the -appropriate column name. - -6.32 How can I use the zoom search feature? - -The Zoom search feature is an alternative to table search feature. It allows -you to explore a table by representing its data in a scatter plot. You can -locate this feature by selecting a table and clicking the 'Search' tab. One of -the sub-tabs in the 'Table Search' page is 'Zoom Search'. - -Consider the table REL_persons in FAQ 6.6 for an example. To use zoom search, -two columns need to be selected, for example, id and town_code. The id values -will be represented on one axis and town_code values on the other axis. Each -row will be represented as a point in a scatter plot based on its id and -town_code. You can include two additional search criteria apart from the two -fields to display. - -You can choose which field should be displayed as label for each point. If a -display column has been set for the table (see FAQ 6.7), it is taken as the -label unless you specify otherwise. You can also select the maximum number of -rows you want to be displayed in the plot by specifing it in the 'Max rows to -plot' field. Once you have decided over your criteria, click 'Go' to display -the plot. - -After the plot is generated, you can use the mousewheel to zoom in and out of -the plot. In addition, panning feature is enabled to navigate through the plot. -You can zoom-in to a certail level of detail and use panning to locate your -area of interest. Clicking on a point opens a dialogue box, displaying field -values of the data row represented by the point. You can edit the values if -required and click on submit to issue an update query. Basic instructions on -how to use can be viewed by clicking the 'How to use?' link located just above -the plot. - -phpMyAdmin project - -7.1 I have found a bug. How do I inform developers? - -Our Bug Tracker is located at http://sf.net/projects/phpmyadmin/ under the Bugs -section. - -But please first discuss your bug with other users: -https://sourceforge.net/projects/phpmyadmin/forums. - -7.2 I want to translate the messages to a new language or upgrade an existing -language, where do I start? - -Translations are very welcome and all you need to have are the language skills. -The easiest way is to use our online translation service. You can check out all -the possibilities to translate in the translate section on our website. - -7.3 I would like to help out with the development of phpMyAdmin. How should I -proceed? - -We welcome every contribution to the development of phpMyAdmin. You can check -out all the possibilities to contribute in the contribute section on our -website. - -Security - -8.1 Where can I get information about the security alerts issued for -phpMyAdmin? - -Please refer to http://www.phpmyadmin.net/home_page/security.php - -8.2 How can I protect phpMyAdmin against brute force attacks? - -If you use Apache web server, phpMyAdmin exports information about -authentication to the Apache environment and it can be used in Apache logs. -Currently there are two variables available: - -userID - User name of currently active user (he does not have to be logged in). -userStatus - Status of currently active user, one of ok (user is logged in), - mysql-denied (MySQL denied user login), allow-denied (user denied by allow/ - deny rules), root-denied (root is denied in configuration), empty-denied - (empty password is denied). - -LogFormat directive for Apache can look like following: - -LogFormat "%h %l %u %t \"%r\" %>s %b \ -\"%{Referer}i\" \"%{User-Agent}i\" %{userID}n %{userStatus}n" pma_combined - -You can then use any log analyzing tools to detect possible break-in attempts. - -Synchronization - -9.1 How can I synchronize two databases/tables in phpMyAdmin? - -You can now synchronize databases/tables in phpMyAdmin using the Synchronize -feature. It allows you to connect to local as well as remote servers. This -requires you to enter server host name, username, password, port and the name -of the database. Therefore you can now synchronize your databases placed on the -same server or some remote server. - -This feature is helpful for developers who need to replicate their database?s -structure as well as data. Moreover, this feature not only helps replication -but also facilitates the user to keep his/her database in sync with another -database. Other than the full database, certain tables of the databases can -also be synchronized. - -You need to fill in the host name of the server, the username and password of -an user account already there in MySQL. Port is by default populated with 3306 -(MySQL default port). Then the name of the database should be mentioned at the -end. All the information other than the port needs to be filled explicitly for -the source as well as target servers. - -After successfully passing through the authentication phase, the source and -target database table names will be displayed. It will be a tabular -representation. - -On the left, are listed the source database table names. Some of the names have -a + plus sign preceding them. This shows that these tables are only present in -source database and they need to be added to the target database in order to -synchronize the target database. The tables whose names are not preceded by a + -sign are already present in the target database. - -On the right, are listed the target database table names. There are few table -names that have (not present) appended after their names. This means that these -tables are to be created in target database in order to synchronize target -database with source database. Some table names have a - minus sign preceding -them. This shows that these tables are only present in target database and they -will remain unchanged in the target database. The column in the middle shows -the difference between the source and target corresponding tables. - -The difference is depicted by the red and green buttons with S and D letters, -indicating that either Structure or Data are not up to date. By clicking on -them, they will turn grey, what means that they will be synchronized. - -9.2 Are there problems with data synchronizing large tables? - -Yes. This aspect of synchronization is currently limited to small tables, and -they must have a primary key. - -Developers Information - -phpMyAdmin is Open Source, so you're invited to contribute to it. Many great -features have been written by other people and you too can help to make -phpMyAdmin a useful tool. - -You can check out all the possibilities to contribute in the contribute section -on our website. - -Copyright - -Copyright (C) 1998-2000 Tobias Ratschiller -Copyright (C) 2001-2012 Marc Delisle - Olivier M?ller - Robin Johnson - Alexander M. Turek - Michal ?iha? - Garvin Hicking - Michael Keck - Sebastian Mendel - [check credits for more details] - -This program is free software; you can redistribute it and/or modify it under -the terms of the GNU General Public License version 2, as published by the Free -Software Foundation. - -This program is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A -PARTICULAR PURPOSE. See the GNU General Public License for more details. - -You should have received a copy of the GNU General Public License along with -this program. If not, see http://www.gnu.org/licenses/. - -Credits - -Credits, in chronological order - - * Tobias Ratschiller - + creator of the phpmyadmin project - + maintainer from 1998 to summer 2000 - * Marc Delisle - + multi-language version in December 1998 - + various fixes and improvements - + SQL analyser (most of it) - + current project maintainer - * Olivier M?ller - + started SourceForge phpMyAdmin project in March 2001 - + sync'ed different existing CVS trees with new features and bugfixes - + multi-language improvements, dynamic language selection - + many bugfixes and improvements - * Lo?c Chapeaux - + rewrote and optimized javascript, DHTML and DOM stuff - + rewrote the scripts so they fit the PEAR coding standards and generate - XHTML1.0 and CSS2 compliant codes - + improved the language detection system - + many bugfixes and improvements - * Robin Johnson - + database maintenance controls - + table type code - + Host authentication IP Allow/Deny - + DB-based configuration (Not completed) - + SQL parser and pretty-printer - + SQL validator - + many bugfixes and improvements - * Armel Fauveau - + bookmarks feature - + multiple dump feature - + gzip dump feature - + zip dump feature - * Geert Lund - + various fixes - + moderator of the phpMyAdmin former users forum at phpwizard.net - * Korakot Chaovavanich - + "insert as new row" feature - * Pete Kelly - + rewrote and fix dump code - + bugfixes - * Steve Alberty - + rewrote dump code for PHP4 - + mySQL table statistics - + bugfixes - * Benjamin Gandon - + main author of the version 2.1.0.1 - + bugfixes - * Alexander M. Turek - + MySQL 4.0 / 4.1 / 5.0 compatibility - + abstract database interface (PMA_DBI) with MySQLi support - + privileges administration - + XML exports - + various features and fixes - + German language file updates - * Mike Beck - + automatic joins in QBE - + links column in printview - + Relation view - * Michal ?iha? - + enhanced index creation/display feature - + feature to use a different charset for HTML than for MySQL - + improvements of export feature - + various features and fixes - + Czech language file updates - * Christophe Gesch? from the "MySQL Form Generator for PHPMyAdmin" (http:// - sf.net/projects/phpmysqlformgen/) - + suggested the patch for multiple table printviews - * Garvin Hicking - + built the patch for vertical display of table rows - + built the Javascript based Query window + SQL history - + Improvement of column/db comments - + (MIME)-Transformations for columns - + Use custom alias names for Databases in left frame - + hierarchical/nested table display - + PDF-scratchboard for WYSIWYG-distribution of PDF relations - + new icon sets - + vertical display of column properties page - + some bugfixes, features, support, German language additions - * Yukihiro Kawada - + japanese kanji encoding conversion feature - * Piotr Roszatycki and Dan Wilson - + the Cookie authentication mode - * Axel Sander - + table relation-links feature - * Maxime Delorme - + PDF schema output, thanks also to Olivier Plathey for the "FPDF" - library (see http://www.fpdf.org/) and Steven Wittens for the "UFPDF" - library (see http://www.acko.net/node/56). - * Olof Edlund - + SQL validator server - * Ivan R. Lanin - + phpMyAdmin logo (until June 2004) - * Mike Cochrane - + blowfish library from the Horde project - * Marcel Tschopp - + mysqli support - + many bugfixes and improvements - * Nicola Asuni (Tecnick.com) - + TCPDF library (http://www.tcpdf.org) - * Michael Keck - + redesign for 2.6.0 - + phpMyAdmin sailboat logo (June 2004) - * Mathias Landh?u?er - + Representation at conferences - * Sebastian Mendel - + interface improvements - + various bugfixes - * Ivan A Kirillov - + new relations Designer - * Raj Kissu Rajandran (Google Summer of Code 2008) - + BLOBstreaming support - * Piotr Przybylski (Google Summer of Code 2008, 2010 and 2011) - + improved setup script - + user preferences - + Drizzle support - * Derek Schaefer (Google Summer of Code 2009) - + Improved the import system - * Alexander Rutkowski (Google Summer of Code 2009) - + Tracking mechanism - * Zahra Naeem (Google Summer of Code 2009) - + Synchronization feature - * Tom?? Srnka (Google Summer of Code 2009) - + Replication support - * Muhammad Adnan (Google Summer of Code 2010) - + Relation schema export to multiple formats - * Lori Lee (Google Summer of Code 2010) - + User interface improvements - + ENUM/SET editor - + Simplified interface for export/import - * Ninad Pundalik (Google Summer of Code 2010) - + AJAXifying the interface - * Martynas Mickevi?ius (Google Summer of Code 2010) - + Charts - * Barrie Leslie - + BLOBstreaming support with PBMS PHP extension - * Ankit Gupta (Google Summer of Code 2010) - + Visual query builder - * Rouslan Placella (Google Summer of Code 2011) - + Improved support for Stored Routines, Triggers and Events - + Italian translation updates - * Dieter Adriaenssens - + Various bugfixes - + Dutch translation updates - -And also to the following people who have contributed minor changes, -enhancements, bugfixes or support for a new language since version 2.1.0: - -Bora Alioglu, Ricardo ?, Sven-Erik Andersen, Alessandro Astarita, P?ter -Bakondy, Borges Botelho, Olivier Bussier, Neil Darlow, Mats Engstrom, Ian -Davidson, Laurent Dhima, Kristof Hamann, Thomas Kl?ger, Lubos Klokner, Martin -Marconcini, Girish Nair, David Nordenberg, Andreas Pauley, Bernard M. Piller, -Laurent Haas, "Sakamoto", Yuval Sarna, www.securereality.com.au, Alexis -Soulard, Alvar Soome, Siu Sun, Peter Svec, Michael Tacelosky, Rachim Tamsjadi, -Kositer Uros, Lu?s V., Martijn W. van der Lee, Algis Vainauskas, Daniel -Villanueva, Vinay, Ignacio Vazquez-Abrams, Chee Wai, Jakub Wilk, Thomas Michael -Winningham, Vilius Zigmantas, "Manuzhai". - -Original Credits of Version 2.1.0 - -This work is based on Peter Kuppelwieser's MySQL-Webadmin. It was his idea to -create a web-based interface to MySQL using PHP3. Although I have not used any -of his source-code, there are some concepts I've borrowed from him. phpMyAdmin -was created because Peter told me he wasn't going to further develop his -(great) tool. - -Thanks go to - - * Amalesh Kempf who contributed the code for - the check when dropping a table or database. He also suggested that you - should be able to specify the primary key on tbl_create.php3. To version - 1.1.1 he contributed the ldi_*.php3-set (Import text-files) as well as a - bug-report. Plus many smaller improvements. - * Jan Legenhausen : He made many of the changes that were - introduced in 1.3.0 (including quite significant ones like the - authentication). For 1.4.1 he enhanced the table-dump feature. Plus - bug-fixes and help. - * Marc Delisle made phpMyAdmin - language-independent by outsourcing the strings to a separate file. He also - contributed the French translation. - * Alexandr Bravo who contributed tbl_select.php3, a - feature to display only some columns from a table. - * Chris Jackson added support for MySQL functions in - tbl_change.php3. He also added the "Query by Example" feature in 2.0. - * Dave Walton added support for multiple servers - and is a regular contributor for bug-fixes. - * Gabriel Ash contributed the random access features - for 2.0.6. - -The following people have contributed minor changes, enhancements, bugfixes or -support for a new language: - -Jim Kraai, Jordi Bruguera, Miquel Obrador, Geert Lund, Thomas Kleemann, -Alexander Leidinger, Kiko Albiol, Daniel C. Chao, Pavel Piankov, Sascha -Kettler, Joe Pruett, Renato Lins, Mark Kronsbein, Jannis Hermanns, G. Wieggers. - -And thanks to everyone else who sent me email with suggestions, bug-reports and -or just some feedback. - -Glossary - -From Wikipedia, the free encyclopedia - - * .htaccess - the default name of Apache's directory-level configuration - file. - * Blowfish - a keyed, symmetric block cipher, designed in 1993 by Bruce - Schneier. - * Browser (Web Browser) - a software application that enables a user to - display and interact with text, images, and other information typically - located on a web page at a website on the World Wide Web. - * bzip2 - a free software/open source data compression algorithm and program - developed by Julian Seward. - * CGI (Common Gateway Interface) - an important World Wide Web technology - that enables a client web browser to request data from a program executed - on the Web server. - * Changelog - a log or record of changes made to a project. - * Client - a computer system that accesses a (remote) service on another - computer by some kind of network. - * column - a set of data values of a particular simple type, one for each row - of the table. - * Cookie - a packet of information sent by a server to a World Wide Web - browser and then sent back by the browser each time it accesses that - server. - * CSV - Comma-separated values - * DB - look at Database. - * database - an organized collection of data. - * Engine - look at Storage Engines. - * extension - a PHP module that extends PHP with additional functionality. - * FAQ (Frequently Asked Questions) - a list of commonly asked question and - there answers. - * Field - one part of divided data/columns. - * foreign key - a column or group of columns in a database row that point to - a key column or group of columns forming a key of another database row in - some (usually different) table. - * FPDF (FreePDF) - the free PDF library - * GD Graphics Library - a library by Thomas Boutell and others for - dynamically manipulating images. - * GD2 - look at GD Graphics Library. - * gzip - gzip is short for GNU zip, a GNU free software file compression - program. - * host - any machine connected to a computer network, a node that has a - hostname. - * hostname - the unique name by which a network attached device is known on a - network. - * HTTP (HyperText Transfer Protocol) - the primary method used to transfer or - convey information on the World Wide Web. - * https - a HTTP-connection with additional security measures. - * IIS (Internet Information Services) - a set of Internet-based services for - servers using Microsoft Windows. - * Index - a feature that allows quick access to the rows in a table. - * IP (Internet Protocol) - a data-oriented protocol used by source and - destination hosts for communicating data across a packet-switched - internetwork. - * IP Address - a unique number that devices use in order to identify and - communicate with each other on a network utilizing the Internet Protocol - standard. - * ISAPI (Internet Server Application Programming Interface) - the API of - Internet Information Services (IIS). - * ISP (Internet service provider) - a business or organization that offers - users access to the Internet and related services. - * JPEG - a most commonly used standard method of lossy compression for - photographic images. - * JPG - look at JPEG. - * Key - look at index. - * L^AT[E]X - a document preparation system for the T[E]X typesetting program. - * Mac (Apple Macintosh) - line of personal computers is designed, developed, - manufactured, and marketed by Apple Computer. - * Mac OS X - the operating system which is included with all currently - shipping Apple Macintosh computers in the consumer and professional - markets. - * MCrypt - a cryptographic library. - * mcrypt - the MCrypt PHP extension. - * MIME (Multipurpose Internet Mail Extensions) - an Internet Standard for the - format of e-mail. - * module - some sort of extension for the Apache Webserver. - * MySQL - a multithreaded, multi-user, SQL (Structured Query Language) - Database Management System (DBMS). - * mysqli - the improved MySQL client PHP extension. - * mysql - the MySQL client PHP extension. - * OpenDocument - open standard for office documents. - * OS X - look at Mac OS X. - * PDF (Portable Document Format) - a file format developed by Adobe Systems - for representing two dimensional documents in a device independent and - resolution independent format. - * PEAR - the PHP Extension and Application Repository. - * PCRE (Perl Compatible Regular Expressions) - the perl-compatible regular - expression functions for PHP - * PHP - short for "PHP: Hypertext Preprocessor", is an open-source, - reflective programming language used mainly for developing server-side - applications and dynamic web content, and more recently, a broader range of - software applications. - * port - a connection through which data is sent and received. - * RFC - Request for Comments (RFC) documents are a series of memoranda - encompassing new research, innovations, and methodologies applicable to - Internet technologies. - * RFC 1952 - GZIP file format specification version 4.3 - * Row (record, tuple) - represents a single, implicitly structured data item - in a table. - * Server - a computer system that provides services to other computing - systems over a network. - * Storage Engines - handlers for different table types - * socket - a form of inter-process communication. - * SSL (Secure Sockets Layer) - a cryptographic protocol which provides secure - communication on the Internet. - * Stored procedure - a subroutine available to applications accessing a - relational database system - * SQL - Structured Query Language - * table - a set of data elements (cells) that is organized, defined and - stored as horizontal rows and vertical columns where each item can be - uniquely identified by a label or key or by it?s position in relation to - other items. - * Table type - * tar - a type of archive file format: the Tape ARchive format. - * TCP (Transmission Control Protocol) - one of the core protocols of the - Internet protocol suite. - * trigger - a procedural code that is automatically executed in response to - certain events on a particular table or view in a database - * UFPDF - Unicode/UTF-8 extension for FPDF - * URL (Uniform Resource Locator) - a sequence of characters, conforming to a - standardized format, that is used for referring to resources, such as - documents and images on the Internet, by their location. - * Webserver - A computer (program) that is responsible for accepting HTTP - requests from clients and serving them Web pages. - * XML (Extensible Markup Language) - a W3C-recommended general-purpose markup - language for creating special-purpose markup languages, capable of - describing many different kinds of data. - * ZIP - a popular data compression and archival format. - * zlib - an open-source, cross-platform data compression library by Jean-loup - Gailly and Mark Adler. - - * Copyright ? 2003 - 2010 phpMyAdmin devel team - * License - * Donate - * Valid HTML and CSS - diff --git a/phpMyAdmin/README.VENDOR b/phpMyAdmin/README.VENDOR deleted file mode 100644 index bc9258b..0000000 --- a/phpMyAdmin/README.VENDOR +++ /dev/null @@ -1,35 +0,0 @@ -phpMyAdmin - hints for distributing phpMyAdmin -============================================== - -This document is intended to give advices to people who want to -redistribute phpMyAdmin inside other software package such as Linux -distribution or some all in one package including web server and MySQL -server. - -Generally you can customize some basic aspects (paths to some files and -behavior) in libraries/vendor_config.php. - -For example if you want setup script to generate config file in var, -change SETUP_CONFIG_FILE to /var/lib/phpmyadmin/config.inc.php and you -will also probably want to skip directory writable check, so set -SETUP_DIR_WRITABLE to false. - -External libraries ------------------- - -phpMyAdmin includes several external libraries, you might want to -replace them with system ones if they are available, but please note -that you should test whether version you provide is compatible with the -one we ship. - -Currently known list of external libraries: - -js/jquery - jQuery js framework and various jQuery based libraries. - -libraries/php-gettext - php-gettext library -libraries/tcpdf - tcpdf library, stripped down of not needed files - -# vim: et ts=4 sw=4 sts=4 tw=72 spell spelllang=en_us diff --git a/phpMyAdmin/RELEASE-DATE-3.5.7 b/phpMyAdmin/RELEASE-DATE-3.5.7 deleted file mode 100644 index 26fd569..0000000 --- a/phpMyAdmin/RELEASE-DATE-3.5.7 +++ /dev/null @@ -1 +0,0 @@ -Fri Feb 15 12:28:57 UTC 2013 diff --git a/phpMyAdmin/bs_disp_as_mime_type.php b/phpMyAdmin/bs_disp_as_mime_type.php deleted file mode 100644 index 5284e55..0000000 --- a/phpMyAdmin/bs_disp_as_mime_type.php +++ /dev/null @@ -1,63 +0,0 @@ -= $f_size) { - break; - } -} - -echo $content; -flush(); - -fclose($fHnd); diff --git a/phpMyAdmin/bs_play_media.php b/phpMyAdmin/bs_play_media.php deleted file mode 100644 index d9ba62a..0000000 --- a/phpMyAdmin/bs_play_media.php +++ /dev/null @@ -1,66 +0,0 @@ - $bsReference, 'c_type' => $mediaType)); - } else { - // Get the BLOB streaming URL - $bs_file_path = PMA_BS_getURL($bsReference); - if (empty($bs_file_path)) { - die(__('No blob streaming server configured!')); - } - } - ?> - - - - - - - - diff --git a/phpMyAdmin/docs.css b/phpMyAdmin/docs.css deleted file mode 100644 index 7e15537..0000000 --- a/phpMyAdmin/docs.css +++ /dev/null @@ -1,213 +0,0 @@ -/* Stylesheet for phpMyAdmin documentation */ -/* vim: expandtab ts=4 sw=4 sts=4 tw=78 -*/ - -body { - background-color: #ffffff; - font-family: sans-serif; - color: #000000; - margin: 0; - padding: 0; - background: url('themes/original/img/logo_right.png') no-repeat fixed bottom right; -} - -img { - border: 0; -} - -#header { - margin: 0px; - padding: 1em 0.5em 0.5em 1em; - background: #036; - border: 0px; - border-bottom: 1px solid black; -} - -#header h1 { - padding: 0; - margin: 0; - margin-right: 1em; - color: white; -} - -#header h1 a { - color: #7584b3; -} - -#header h1 a .myadmin { - color: #ffad17; -} - -#body { - margin: 2em 1em 1em 1em; - padding: 0px; - padding-right: 13em; -} - -ul#footer { - padding: 0; - margin: 0; - max-width: 100%; -} - -#footer li { - font-size: smaller; - list-style: none; - float: left; - padding: 1em; - color: gray; - border: none; -} - -#footer a { - color: #c19e66; -} - -abbr, acronym { - border-bottom: 1px dotted; -} - -abbr, acronym { - cursor: help; -} - -a { - text-decoration: none; - color: #c17d11; -} - -a:hover { - text-decoration: underline; - color: #8f5902; -} - -sup { - font-size: 0.7em; -} - -sup:before { - content: ' ['; -} - -sup:after { - content: ']'; -} - - -ul.header { - background: url(themes/original/img/docs_menu_bg.png) transparent fixed; - position: fixed; - top: 3em; - left: auto; - width: 8.5em; - right: 2em; - text-align: center; - margin: 1em; - padding: 1em; - border: 1px solid black; -} - -ul.header li { - margin: 0; - padding: 0; - display: block; -} - -ul.header a { - text-decoration: none; - font-size: medium; - color: #036; - background-color: transparent; - font-weight: bolder; - display: block; -} - -ul.header a:hover { - color: #000099; - background-color: #99CCFF; -} - -h2 { - color: #727e0a; - max-width: 70em; -} - -h3 { - color: #727e0a; - max-width: 70em; -} - -h4, h5 { - color: #727e0a; - max-width: 70em; -} - -h4 a { - color: #727e0a; -} - -p { - max-width: 70em; - margin: 1em; -} - -ul, dl, ol { - margin: 1em; - max-width: 70em; -} - -ul ul, ol ul { - margin-bottom: 0; -} - -li { - margin-top: 0.5em; -} - -pre { - margin: 1em; - border: 1px solid silver; - color: #000000; - background-color: #eeeeee; - padding: 0.5em; - max-width: 70em; -} - -/* no more intend inside li */ -li pre { - margin: 1em 0 1em 0; -} - -dt { - font-weight: bold; - margin-left: 2em; -} - -dd { - margin-left: 4em; - margin-bottom: 1em; -} - -.configrule { - font-family: monospace; -} - -.important { - color: #bb0000; - background-color: #ffeeee; - padding: 0 0.5em 0 0.5em; -} - -p.important { - border: 1px dotted #ff0000; - padding: 0.5em; -} - -p.footnote { - margin: 0 5% 2px 7%; - padding-top: 3em; -} - -p.footnote:first-line { - margin-left: -2%; -} diff --git a/phpMyAdmin/enum_editor.php b/phpMyAdmin/enum_editor.php deleted file mode 100644 index 1c2256f..0000000 --- a/phpMyAdmin/enum_editor.php +++ /dev/null @@ -1,119 +0,0 @@ - - - -
- - -
- -
-

- -

-

- - $value) { - $values[$key] = htmlentities($value); - } - } elseif (isset($_GET['values']) && is_string($_GET['values'])) { - // Parse the values from a string - $values = PMA_parseEnumSetValues($_GET['values']); - } - // Escape double quotes - foreach ($values as $key => $value) { - $values[$key] = str_replace('"', ""e;", $value); - } - // If there are no values, maybe the user is about to make a - // new list so we add a few for him/her to get started with. - if (! count($values) - || (count($values) == 1 && strlen($values[0]) == 0) - ) { - array_push($values, '', '', ''); - } - // Add an empty value, if there was a request to do so - if (! empty($_GET['add_field'])) { - $values[] = ''; - } - // Remove a value, given a valid index, from the list - // of values, if there was a request to do so. - if (isset($_GET['drop']) && is_array($_GET['drop'])) { - foreach ($_GET['drop'] as $index => $value) { - if ((int)$index == $index - && $index > 0 - && $index <= count($values) - ) { - unset($values[$index]); - } - } - } - // Display the values in text fields - $field_counter = 0; - foreach ($values as $value) { - $field_counter++; - echo sprintf( - '' . "\n"; - } - ?> - -
' . "\n", - $value - ); - echo ''; - echo '' . "\n"; - echo '
- - - -
-
-
-
-

-

- $value) { - $values[$key] = "'"; - $values[$key] .= str_replace( - array("'", "\\", "'", "\"), - array("''", '\\\\', "''", '\\\\'), - $value - ); - $values[$key] .= "'"; - } - // Print out the values as a string - ?> - -
-
-
- - diff --git a/phpMyAdmin/main.php b/phpMyAdmin/main.php deleted file mode 100644 index 989f210..0000000 --- a/phpMyAdmin/main.php +++ /dev/null @@ -1,458 +0,0 @@ - 0, a server has been chosen so we can display -// all MySQL-related information -if ($server > 0) { - include './libraries/server_common.inc.php'; - include './libraries/StorageEngine.class.php'; - include './libraries/server_links.inc.php'; - - // Use the verbose name of the server instead of the hostname - // if a value is set - $server_info = ''; - if (! empty($cfg['Server']['verbose'])) { - $server_info .= htmlspecialchars($cfg['Server']['verbose']); - if ($GLOBALS['cfg']['ShowServerInfo']) { - $server_info .= ' ('; - } - } - if ($GLOBALS['cfg']['ShowServerInfo'] || empty($cfg['Server']['verbose'])) { - $server_info .= PMA_DBI_get_host_info(); - } - if (! empty($cfg['Server']['verbose']) && $GLOBALS['cfg']['ShowServerInfo']) { - $server_info .= ')'; - } - $mysql_cur_user_and_host = PMA_DBI_fetch_value('SELECT USER();'); - - // should we add the port info here? - $short_server_info = (!empty($GLOBALS['cfg']['Server']['verbose']) - ? $GLOBALS['cfg']['Server']['verbose'] - : $GLOBALS['cfg']['Server']['host']); -} - -echo '
' . "\n"; -echo '
'; -if ($server > 0 - || (! $cfg['LeftDisplayServers'] && count($cfg['Servers']) > 1)) { - echo '
'; - echo '

' . __('General Settings') . '

'; - echo '
    '; - - /** - * Displays the MySQL servers choice form - */ - if (! $cfg['LeftDisplayServers'] - && (count($cfg['Servers']) > 1 || $server == 0 && count($cfg['Servers']) == 1)) { - echo '
  • '; - include_once './libraries/select_server.lib.php'; - PMA_select_server(true, true); - echo '
    • '; - } - - /** - * Displays the mysql server related links - */ - if ($server > 0 && !PMA_DRIZZLE) { - include_once './libraries/check_user_privileges.lib.php'; - - // Logout for advanced authentication - if ($cfg['Server']['auth_type'] != 'config') { - if ($cfg['ShowChgPassword']) { - if ($GLOBALS['cfg']['AjaxEnable']) { - $conditional_class = 'ajax'; - } else { - $conditional_class = null; - } - PMA_printListItem( - __('Change password'), - 'li_change_password', - './user_password.php?' . $common_url_query, - null, - null, - 'change_password_anchor', - null, - $conditional_class - ); - } - } // end if - echo '
  • '; - echo '
    ' . "\n" - . PMA_generate_common_hidden_inputs(null, null, 4, 'collation_connection') - . ' ' . "\n" - - . PMA_generateCharsetDropdownBox(PMA_CSDROPDOWN_COLLATION, 'collation_connection', 'select_collation_connection', $collation_connection, true, 4, true) - . ' ' . "\n" - . '
    ' . "\n" - . '
    • ' . "\n"; - } // end of if ($server > 0 && !PMA_DRIZZLE) - echo '
'; - echo '
'; -} - -echo '
'; -echo '

' . __('Appearance Settings') . '

'; -echo '
    '; - -// Displays language selection combo -if (empty($cfg['Lang'])) { - echo '
  • '; - include_once './libraries/display_select_lang.lib.php'; - PMA_select_language(); - echo '
    • '; -} - -// ThemeManager if available - -if ($GLOBALS['cfg']['ThemeManager']) { - echo '
  • '; - echo $_SESSION['PMA_Theme_Manager']->getHtmlSelectBox(); - echo '
    • '; -} -echo '
  • '; -echo PMA_Config::getFontsizeForm(); -echo '
    • '; - -echo '
'; - -// User preferences - -if ($server > 0) { - echo '
    '; - echo PMA_printListItem( - __('More settings'), - 'li_user_preferences', - './prefs_manage.php?' . $common_url_query - ); - echo '
'; -} - -echo '
'; - - -echo '
'; -echo '
'; - - -if ($server > 0 && $GLOBALS['cfg']['ShowServerInfo']) { - echo '
'; - echo '

' . __('Database server') . '

'; - echo '
    ' . "\n"; - PMA_printListItem(__('Server') . ': ' . $server_info, 'li_server_info'); - PMA_printListItem(__('Software') . ': ' . PMA_getServerType(), 'li_server_type'); - PMA_printListItem(__('Software version') . ': ' . PMA_MYSQL_STR_VERSION . ' - ' . PMA_MYSQL_VERSION_COMMENT, 'li_server_version'); - PMA_printListItem( - __('Protocol version') . ': ' . PMA_DBI_get_proto_info(), - 'li_mysql_proto' - ); - PMA_printListItem( - __('User') . ': ' . htmlspecialchars($mysql_cur_user_and_host), - 'li_user_info' - ); - - echo '
  • '; - echo ' ' . __('Server charset') . ': ' - . ' ' - . ' ' . $mysql_charsets_descriptions[$mysql_charset_map['utf-8']] . "\n" - . ' (' . $mysql_charset_map['utf-8'] . ')' . "\n" - . ' ' . "\n" - . '
    • ' . "\n"; - echo '
'; - echo '
'; -} - -if ($GLOBALS['cfg']['ShowServerInfo'] || $GLOBALS['cfg']['ShowPhpInfo']) { - echo '
'; - echo '

' . __('Web server') . '

'; - echo '
    '; - if ($GLOBALS['cfg']['ShowServerInfo']) { - PMA_printListItem($_SERVER['SERVER_SOFTWARE'], 'li_web_server_software'); - - if ($server > 0) { - $client_version_str = PMA_DBI_get_client_info(); - if (preg_match('#\d+\.\d+\.\d+#', $client_version_str) - && in_array($GLOBALS['cfg']['Server']['extension'], array('mysql', 'mysqli')) - ) { - $client_version_str = 'libmysql - ' . $client_version_str; - } - PMA_printListItem( - __('Database client version') . ': ' . $client_version_str, - 'li_mysql_client_version' - ); - PMA_printListItem( - __('PHP extension') . ': ' . $GLOBALS['cfg']['Server']['extension']. ' ' - . PMA_showPHPDocu('book.' . $GLOBALS['cfg']['Server']['extension'] . '.php'), - 'li_used_php_extension' - ); - } - } - - if ($cfg['ShowPhpInfo']) { - PMA_printListItem(__('Show PHP information'), 'li_phpinfo', './phpinfo.php?' . $common_url_query); - } - echo '
'; - echo '
'; -} - -echo '
'; -echo '

phpMyAdmin

'; -echo '
    '; -$class = null; -// We rely on CSP to allow access to http://www.phpmyadmin.net, but IE lacks -// support here and does not allow request to http once using https. -if ($GLOBALS['cfg']['VersionCheck'] && (! $GLOBALS['PMA_Config']->get('is_https') || PMA_USR_BROWSER_AGENT != 'IE')) { - $class = 'jsversioncheck'; -} -PMA_printListItem(__('Version information') . ': ' . PMA_VERSION, 'li_pma_version', null, null, null, null, $class); -PMA_printListItem(__('Documentation'), 'li_pma_docs', 'Documentation.html', null, '_blank'); -PMA_printListItem(__('Wiki'), 'li_pma_wiki', PMA_linkURL('http://wiki.phpmyadmin.net/'), null, '_blank'); - -// does not work if no target specified, don't know why -PMA_printListItem(__('Official Homepage'), 'li_pma_homepage', PMA_linkURL('http://www.phpMyAdmin.net/'), null, '_blank'); -PMA_printListItem(__('Contribute'), 'li_pma_contribute', PMA_linkURL('http://www.phpmyadmin.net/home_page/improve.php'), null, '_blank'); -PMA_printListItem(__('Get support'), 'li_pma_support', PMA_linkURL('http://www.phpmyadmin.net/home_page/support.php'), null, '_blank'); -PMA_printListItem(__('List of changes'), 'li_pma_changes', PMA_linkURL('changelog.php'), null, '_blank'); -?> -
-
- -
- - here, otherwise it will not extend the outer div to the - * full height of the inner divs - */ -?> -
-
-
- - 1) { - trigger_error(__('You have enabled mbstring.func_overload in your PHP configuration. This option is incompatible with phpMyAdmin and might cause some data to be corrupted!'), E_USER_WARNING); -} - -/** - * Nijel: mbstring is used for handling multibyte inside parser, so it is good - * to tell user something might be broken without it, see bug #1063149. - */ -if (! @extension_loaded('mbstring')) { - trigger_error(__('The mbstring PHP extension was not found and you seem to be using a multibyte charset. Without the mbstring extension phpMyAdmin is unable to split strings correctly and it may result in unexpected results.'), E_USER_WARNING); -} - -/** - * Check whether session.gc_maxlifetime limits session validity. - */ -$gc_time = (int)@ini_get('session.gc_maxlifetime'); -if ($gc_time < $GLOBALS['cfg']['LoginCookieValidity'] ) { - trigger_error(__('Your PHP parameter [a@http://php.net/manual/en/session.configuration.php#ini.session.gc-maxlifetime@_blank]session.gc_maxlifetime[/a] is lower than cookie validity configured in phpMyAdmin, because of this, your login will expire sooner than configured in phpMyAdmin.'), E_USER_WARNING); -} - -/** - * Check whether LoginCookieValidity is limited by LoginCookieStore. - */ -if ($GLOBALS['cfg']['LoginCookieStore'] != 0 && $GLOBALS['cfg']['LoginCookieStore'] < $GLOBALS['cfg']['LoginCookieValidity']) { - trigger_error(__('Login cookie store is lower than cookie validity configured in phpMyAdmin, because of this, your login will expire sooner than configured in phpMyAdmin.'), E_USER_WARNING); -} - -/** - * Check if user does not have defined blowfish secret and it is being used. - */ -if (!empty($_SESSION['auto_blowfish_secret']) && - empty($GLOBALS['cfg']['blowfish_secret'])) { - trigger_error(__('The configuration file now needs a secret passphrase (blowfish_secret).'), E_USER_WARNING); -} - -/** - * Check for existence of config directory which should not exist in - * production environment. - */ -if (file_exists('./config')) { - trigger_error(__('Directory [code]config[/code], which is used by the setup script, still exists in your phpMyAdmin directory. You should remove it once phpMyAdmin has been configured.'), E_USER_WARNING); -} - -if ($server > 0) { - $cfgRelation = PMA_getRelationsParam(); - if (! $cfgRelation['allworks'] && $cfg['PmaNoRelation_DisableWarning'] == false) { - $message = PMA_Message::notice(__('The phpMyAdmin configuration storage is not completely configured, some extended features have been deactivated. To find out why click %shere%s.')); - $message->addParam('', false); - $message->addParam('', false); - /* Show error if user has configured something, notice elsewhere */ - if (!empty($cfg['Servers'][$server]['pmadb'])) { - $message->isError(true); - } - $message->display(); - } // end if -} - -/** - * Show notice when javascript support is missing. - */ -echo ''; - -/** - * Warning about different MySQL library and server version - * (a difference on the third digit does not count). - * If someday there is a constant that we can check about mysqlnd, we can use it instead - * of strpos(). - * If no default server is set, PMA_DBI_get_client_info() is not defined yet. - * Drizzle can speak MySQL protocol, so don't warn about version mismatch for Drizzle servers. - */ -if (function_exists('PMA_DBI_get_client_info') && !PMA_DRIZZLE) { - $_client_info = PMA_DBI_get_client_info(); - if ($server > 0 && strpos($_client_info, 'mysqlnd') === false && substr(PMA_MYSQL_CLIENT_API, 0, 3) != substr(PMA_MYSQL_INT_VERSION, 0, 3)) { - trigger_error( - PMA_sanitize( - sprintf( - __('Your PHP MySQL library version %s differs from your MySQL server version %s. This may cause unpredictable behavior.'), - $_client_info, - substr( - PMA_MYSQL_STR_VERSION, - 0, - strpos(PMA_MYSQL_STR_VERSION . '-', '-') - ) - ) - ), - E_USER_NOTICE - ); - } - unset($_client_info); -} - -/** - * Warning about Suhosin - */ -if ($cfg['SuhosinDisableWarning'] == false - && @ini_get('suhosin.request.max_value_length') -) { - trigger_error( - sprintf( - __('Server running with Suhosin. Please refer to %sdocumentation%s for possible issues.'), - '[a@./Documentation.html#faq1_38@_blank]', - '[/a]' - ), - E_USER_WARNING - ); -} - -/** - * Warning about mcrypt. - */ -if (!function_exists('mcrypt_encrypt') && !$GLOBALS['cfg']['McryptDisableWarning']) { - PMA_warnMissingExtension('mcrypt'); -} - -/** - * Warning about incomplete translations. - * - * The data file is created while creating release by ./scripts/remove-incomplete-mo - */ -if (file_exists('./libraries/language_stats.inc.php')) { - include './libraries/language_stats.inc.php'; - /* - * This message is intentionally not translated, because we're - * handling incomplete translations here and focus on english - * speaking users. - */ - if (isset($GLOBALS['language_stats'][$lang]) && $GLOBALS['language_stats'][$lang] < $cfg['TranslationWarningThreshold']) { - trigger_error('You are using an incomplete translation, please help to make it better by contributing.', E_USER_NOTICE); - } -} - -/** - * prints list item for main page - * - * @param string $name displayed text - * @param string $id id, used for css styles - * @param string $url make item as link with $url as target - * @param string $mysql_help_page display a link to MySQL's manual - * @param string $target special target for $url - * @param string $a_id id for the anchor, used for jQuery to hook in functions - * @param string $class class for the li element - * @param string $a_class class for the anchor element - */ -function PMA_printListItem($name, $id = null, $url = null, $mysql_help_page = null, $target = null, $a_id = null, $class = null, $a_class = null) -{ - echo '
  • '; - if (null !== $url) { - echo ''; - } - - echo $name; - - if (null !== $url) { - echo '' . "\n"; - } - if (null !== $mysql_help_page) { - echo PMA_showMySQLDocu('', $mysql_help_page); - } - echo '
    • '; -} - -/** - * Displays the footer - */ -require './libraries/footer.inc.php'; -?> diff --git a/phpMyAdmin/server_synchronize.php b/phpMyAdmin/server_synchronize.php deleted file mode 100644 index c37a9e0..0000000 --- a/phpMyAdmin/server_synchronize.php +++ /dev/null @@ -1,1320 +0,0 @@ - 0 - ) { - ${"{$con}_server"}['port'] = (int)${"{$con}_port"}; - } - } - - ${"{$con}_connection"} = PMA_DBI_connect(${"{$con}_username"}, - ${"{$con}_password"}, $is_controluser = false, - ${"{$con}_server"}, $auxiliary_connection = true); - } // end foreach ($cons as $con) - - if ((! $src_connection && $src_type != 'cur') - || (! $trg_connection && $trg_type != 'cur') - ) { - /** - * Displays the connection error string if - * connections are not established - */ - - echo '
    '; - if (! $src_connection && $src_type != 'cur') { - echo __('Could not connect to the source') . '
    '; - } - if (! $trg_connection && $trg_type != 'cur') { - echo __('Could not connect to the target'); - } - echo '
    '; - unset($_REQUEST['submit_connect']); - - } else { - /** - * Creating the link object for both source and target databases and - * selecting the source and target databases using these links - */ - foreach ($cons as $con) { - if (${"{$con}_connection"} != null) { - ${"{$con}_link"} = PMA_DBI_connect(${"{$con}_username"}, - ${"{$con}_password"}, $is_controluser = false, ${"{$con}_server"}); - } else { - ${"{$con}_link"} = null; - } - ${"{$con}_db_selected"} = PMA_DBI_select_db(${"{$con}_db"}, ${"{$con}_link"}); - ${"{$con}_version"} = PMA_DBI_fetch_value('SELECT VERSION()', 0, 0, ${"{$con}_link"}); - ${"{$con}_is_drizzle"} = (bool)preg_match('/\d{4}\./', ${"{$con}_version"}); - } // end foreach ($cons as $con) - - if (($src_db_selected != 1) || ($trg_db_selected != 1)) { - /** - * Displays error string if the database(s) did not exist - */ - echo '
    '; - if ($src_db_selected != 1) { - echo sprintf(__('\'%s\' database does not exist.'), htmlspecialchars($src_db)); - } - if ($trg_db_selected != 1) { - echo sprintf(__('\'%s\' database does not exist.'), htmlspecialchars($trg_db)); - } - echo '
    '; - unset($_REQUEST['submit_connect']); - - } else if (($src_db_selected == 1) && ($trg_db_selected == 1)) { - - /** - * Using PMA_DBI_get_tables() to get all the tables - * from target and source databases. - */ - $src_tables = PMA_DBI_get_tables($src_db, $src_link); - $source_tables_num = sizeof($src_tables); - - $trg_tables = PMA_DBI_get_tables($trg_db, $trg_link); - $target_tables_num = sizeof($trg_tables); - - /** - * initializing arrays to save matching and non-matching - * table names from target and source databases. - */ - $unmatched_num_src = 0; - $source_tables_uncommon = array(); - $unmatched_num_trg = 0; - $target_tables_uncommon = array(); - $matching_tables = array(); - $matching_tables_num = 0; - - /** - * Using PMA_getMatchingTables to find which of the tables' names match - * in target and source database. - */ - PMA_getMatchingTables($trg_tables, $src_tables, $matching_tables, $source_tables_uncommon); - /** - * Finding the uncommon tables for the target database - * using function PMA_getNonMatchingTargetTables() - */ - PMA_getNonMatchingTargetTables($trg_tables, $matching_tables, $target_tables_uncommon); - - /** - * Initializing several arrays to save the data and structure - * difference between the source and target databases. - */ - $row_count = array(); //number of rows in source table that needs to be created in target database - $fields_num = array(); //number of fields in each matching table - $delete_array = array(); //stores the primary key values for target tables that have excessive rows than corresponding source tables. - $insert_array = array(array(array()));// stores the primary key values for the rows in each source table that are not present in target tables. - $update_array = array(array(array())); //stores the primary key values, name of field to be updated, value of the field to be updated for - // each row of matching table. - $matching_tables_fields = array(); //contains the fields' names for each matching table - $matching_tables_keys = array(); //contains the primary keys' names for each matching table - $uncommon_tables_fields = array(); //coantains the fields for all the source tables that are not present in target - $matching_tables_num = sizeof($matching_tables); - - $source_columns = array(); //contains the full columns' information for all the source tables' columns - $target_columns = array(); //contains the full columns' information for all the target tables' columns - $uncommon_columns = array(); //contains names of columns present in source table but absent from the corresponding target table - $source_indexes = array(); //contains indexes on all the source tables - $target_indexes = array(); //contains indexes on all the target tables - $add_indexes_array = array(); //contains the indexes name present in source but absent from target tables - $target_tables_keys = array(); //contains the keys of all the target tables - $alter_indexes_array = array(); //contains the names of all the indexes for each table that need to be altered in target database - $remove_indexes_array = array(); //contains the names of indexes that are excessive in target tables - $alter_str_array = array(array()); //contains the criteria for each column that needs to be altered in target tables - $add_column_array = array(array()); //contains the name of columns that need to be added in target tables - /** - * The criteria array contains all the criteria against which columns are compared for differences. - */ - $criteria = array('Field', 'Type', 'Null', 'Collation', 'Key', 'Default', 'Comment'); - - for ($i = 0; $i < sizeof($matching_tables); $i++) { - /** - * Finding out all the differences structure, data and index diff - * for all the matching tables only - */ - PMA_dataDiffInTables($src_db, $trg_db, $src_link, $trg_link, - $matching_tables, $matching_tables_fields, $update_array, - $insert_array, $delete_array, $fields_num, $i, - $matching_tables_keys); - - PMA_structureDiffInTables($src_db, $trg_db, $src_link, $trg_link, - $matching_tables, $source_columns, $target_columns, - $alter_str_array, $add_column_array, $uncommon_columns, - $criteria, $target_tables_keys, $i); - - PMA_indexesDiffInTables($src_db, $trg_db, $src_link, $trg_link, - $matching_tables, $source_indexes, $target_indexes, - $add_indexes_array, $alter_indexes_array, $remove_indexes_array, $i); - } - - for ($j = 0; $j < sizeof($source_tables_uncommon); $j++) { - /** - * Finding out the number of rows to be added in tables - * that need to be added in target database - */ - PMA_dataDiffInUncommonTables($source_tables_uncommon, $src_db, - $src_link, $j, $row_count); - } - - /** - * Storing all arrays in session for use when page is reloaded - * for each button press - */ - $_SESSION['matching_tables'] = $matching_tables; - $_SESSION['update_array'] = $update_array; - $_SESSION['insert_array'] = $insert_array; - $_SESSION['src_db'] = $src_db; - $_SESSION['trg_db'] = $trg_db; - $_SESSION['matching_fields'] = $matching_tables_fields; - $_SESSION['src_uncommon_tables'] = $source_tables_uncommon; - $_SESSION['src_username'] = $src_username ; - $_SESSION['trg_username'] = $trg_username; - $_SESSION['src_password'] = $src_password; - $_SESSION['trg_password'] = $trg_password; - $_SESSION['trg_password'] = $trg_password; - $_SESSION['src_server'] = $src_server; - $_SESSION['trg_server'] = $trg_server; - $_SESSION['src_type'] = $src_type; - $_SESSION['trg_type'] = $trg_type; - $_SESSION['matching_tables_keys'] = $matching_tables_keys; - $_SESSION['uncommon_tables_fields'] = $uncommon_tables_fields; - $_SESSION['uncommon_tables_row_count'] = $row_count; - $_SESSION['target_tables_uncommon'] = $target_tables_uncommon; - $_SESSION['uncommon_tables'] = $source_tables_uncommon; - $_SESSION['delete_array'] = $delete_array; - $_SESSION['uncommon_columns'] = $uncommon_columns; - $_SESSION['source_columns'] = $source_columns; - $_SESSION['alter_str_array'] = $alter_str_array; - $_SESSION['target_tables_keys'] = $target_tables_keys; - $_SESSION['add_column_array'] = $add_column_array; - $_SESSION['criteria'] = $criteria; - $_SESSION['target_tables'] = $trg_tables; - $_SESSION['add_indexes_array'] = $add_indexes_array; - $_SESSION['alter_indexes_array'] = $alter_indexes_array; - $_SESSION['remove_indexes_array'] = $remove_indexes_array; - $_SESSION['source_indexes'] = $source_indexes; - $_SESSION['target_indexes'] = $target_indexes; - - /** - * Displays the sub-heading and icons showing Structure Synchronization - * and Data Synchronization - */ - ?> -
    - - - - - - -
    - - - - - -
    - 0) - || ($num_insert_cols > 0) - || ($num_remove_cols > 0) - || ($num_add_index > 0) - || ($num_remove_index > 0) - ) { - $btn_structure_params = array($i, $num_alter_cols, $num_insert_cols, - $num_remove_cols, $num_add_index, $num_remove_index); - } - - /** - * Display the green button of data synchronization if there exists - * any data difference. - */ - if ((isset($update_array[$i]) - || isset($insert_array[$i])) - && !empty($matching_tables_keys[$i]) - ) { - if (isset($update_array[$i][0][$matching_tables_keys[$i][0]]) - || isset($insert_array[$i][0][$matching_tables_keys[$i][0]]) - ) { - $btn_data_params = array($i, $num_of_updates, - $num_of_insertions, null, null, null); - } - } - - $rows[] = array( - 'src_table_name' => $matching_tables[$i], - 'dst_table_name' => $matching_tables[$i], - 'btn_type' => 'M', - 'btn_structure' => $btn_structure_params, - 'btn_data' => $btn_data_params - ); - } - /** - * Displays the tables' names present in source but missing from target - */ - for ($j = 0; $j < count($source_tables_uncommon); $j++) { - $row = array( - 'src_table_name' => '+ ' . $source_tables_uncommon[$j], - 'dst_table_name' => $source_tables_uncommon[$j] . ' (' . __('not present') . ')', - 'btn_type' => 'U', - 'btn_structure' => array($j, null, null, null, null, null), - 'btn_data' => null - ); - if ($row_count[$j] > 0) { - $row['btn_data'] = array($j, null, $row_count[$j], null, null, null); - } - $rows[] = $row; - } - foreach ($target_tables_uncommon as $tbl_nc_name) { - $rows[] = array( - 'src_table_name' => '', - 'dst_table_name' => $tbl_nc_name); - } - /** - * Displays the target tables names - */ - PMA_syncDisplayDataCompare($rows); - echo ' - - '; - - /** - * This "list" div will contain a table and each row will depict - * information about structure/data difference in tables. - * Rows will be generated dynamically as soon as the colored - * buttons "D" or "S" are clicked. - */ - - echo '
    - - - - - - - - - - - - - - - - - - - - - -
    ' . __('Table') . ' ' . __('Structure Difference') . ' ' . __('Data Difference') . '
    ' . __('Table name') . '' . __('Create table'). '' . __('Add column(s)') . '' . __('Remove column(s)') . '' . __('Alter column(s)') . '' . __('Remove index(s)') . '' . __('Apply index(s)') . ''. __('Update row(s)') . '' . __('Insert row(s)') . '
    -
    '; - /** - * This fieldset displays the checkbox to confirm deletion of previous rows from target tables - */ - echo '
    -

    -
    -
    '; - echo ''; - echo '' . '
    '; - echo '
    '; - } - } -} // end if ((isset($_REQUEST['submit_connect']))) - - /** - * Display the page when 'Apply Selected Changes' is pressed - */ -if (isset($_REQUEST['Table_ids'])) { - /** - * Displays success message - */ - echo '
    ' - . __('Selected target tables have been synchronized with source tables.') - . '
    '; - - $src_db = $_SESSION['src_db']; - $trg_db = $_SESSION['trg_db']; - $update_array = $_SESSION['update_array']; - $insert_array = $_SESSION['insert_array']; - $src_username = $_SESSION['src_username']; - $trg_username = $_SESSION['trg_username']; - $src_password = $_SESSION['src_password']; - $trg_password = $_SESSION['trg_password']; - $src_server = $_SESSION['src_server']; - $trg_server = $_SESSION['trg_server']; - $src_type = $_SESSION['src_type']; - $trg_type = $_SESSION['trg_type']; - $uncommon_tables = $_SESSION['uncommon_tables']; - $matching_tables = $_SESSION['matching_tables']; - $matching_tables_keys = $_SESSION['matching_tables_keys']; - $matching_tables_fields = $_SESSION['matching_fields']; - $source_tables_uncommon = $_SESSION['src_uncommon_tables']; - $uncommon_tables_fields = $_SESSION['uncommon_tables_fields']; - $target_tables_uncommon = $_SESSION['target_tables_uncommon']; - $row_count = $_SESSION['uncommon_tables_row_count']; - $target_tables = $_SESSION['target_tables']; - - $delete_array = $_SESSION['delete_array']; - $uncommon_columns = $_SESSION['uncommon_columns']; - $source_columns = $_SESSION['source_columns']; - $alter_str_array = $_SESSION['alter_str_array']; - $criteria = $_SESSION['criteria']; - $target_tables_keys = $_SESSION['target_tables_keys']; - $add_column_array = $_SESSION['add_column_array']; - $add_indexes_array = $_SESSION['add_indexes_array']; - $alter_indexes_array = $_SESSION['alter_indexes_array']; - $remove_indexes_array = $_SESSION['remove_indexes_array']; - $source_indexes = $_SESSION['source_indexes']; - $target_indexes = $_SESSION['target_indexes']; - $uncommon_cols = $uncommon_columns; - - /** - * Creating link object for source and target databases - */ - foreach ($cons as $con) { - if (${"{$con}_type"} != "cur") { - ${"{$con}_link"} = PMA_DBI_connect(${"{$con}_username"}, - ${"{$con}_password"}, $is_controluser = false, ${"{$con}_server"}); - } else { - ${"{$con}_link"} = null; - // working on current server, so initialize this for tracking - // (does not work if user defined current server as a remote one) - $GLOBALS['db'] = ${"{$con}_db"}; - } - } // end foreach ($cons as $con) - - /** - * Initializing arrays to save the table ids whose data and structure difference is to be applied - */ - $matching_table_data_diff = array(); //stores id of matching table having data difference - $matching_table_structure_diff = array(); //stores id of matching tables having structure difference - $uncommon_table_structure_diff = array(); //stores id of uncommon tables having structure difference - $uncommon_table_data_diff = array(); //stores id of uncommon tables having data difference - - for ($i = 0; isset($_REQUEST[$i]); $i++ ) { - if (isset($_REQUEST[$i])) { - $table_id = explode("US", $_REQUEST[$i]); - if (isset($table_id[1])) { - $uncommon_table_structure_diff[] = $table_id[1]; - } - $table_id = explode("UD", $_REQUEST[$i]); - if (isset($table_id[1])) { - $uncommon_table_data_diff[] = $table_id[1]; - } - $table_id = explode("MS", $_REQUEST[$i]); - if (isset($table_id[1])) { - $matching_table_structure_diff[] = $table_id[1]; - } - - $table_id = explode("MD", $_REQUEST[$i]); - if (isset($table_id[1])) { - $matching_table_data_diff[] = $table_id[1]; - } - } - } // end for - /** - * Applying the structure difference on selected matching tables - */ - for ($q = 0; $q < sizeof($matching_table_structure_diff); $q++) { - if (isset($alter_str_array[$matching_table_structure_diff[$q]])) { - PMA_alterTargetTableStructure($trg_db, $trg_link, $matching_tables, - $source_columns, $alter_str_array, $matching_tables_fields, - $criteria, $matching_tables_keys, $target_tables_keys, - $matching_table_structure_diff[$q], false); - - unset($alter_str_array[$matching_table_structure_diff[$q]]); - } - if (isset($add_column_array[$matching_table_structure_diff[$q]])) { - PMA_findDeleteRowsFromTargetTables($delete_array, $matching_tables, - $matching_table_structure_diff[$q], $target_tables_keys, - $matching_tables_keys, $trg_db, $trg_link, $src_db, $src_link); - - if (isset($delete_array[$matching_table_structure_diff[$q]])) { - PMA_deleteFromTargetTable($trg_db, $trg_link, $matching_tables, - $matching_table_structure_diff[$q], $target_tables_keys, - $delete_array, false); - - unset($delete_array[$matching_table_structure_diff[$q]]); - } - PMA_addColumnsInTargetTable($src_db, $trg_db, $src_link, $trg_link, - $matching_tables, $source_columns, $add_column_array, - $matching_tables_fields, $criteria, $matching_tables_keys, - $target_tables_keys, $uncommon_tables, $uncommon_tables_fields, - $matching_table_structure_diff[$q], $uncommon_cols, false); - - unset($add_column_array[$matching_table_structure_diff[$q]]); - } - if (isset($uncommon_columns[$matching_table_structure_diff[$q]])) { - PMA_removeColumnsFromTargetTable($trg_db, $trg_link, $matching_tables, - $uncommon_columns, $matching_table_structure_diff[$q], false); - - unset($uncommon_columns[$matching_table_structure_diff[$q]]); - } - if (isset($add_indexes_array[$matching_table_structure_diff[$q]]) - || isset($remove_indexes_array[$matching_table_structure_diff[$q]]) - || isset($alter_indexes_array[$matching_table_structure_diff[$q]]) - ) { - PMA_applyIndexesDiff ($trg_db, $trg_link, $matching_tables, - $source_indexes, $target_indexes, $add_indexes_array, - $alter_indexes_array, $remove_indexes_array, - $matching_table_structure_diff[$q], false); - - unset($add_indexes_array[$matching_table_structure_diff[$q]]); - unset($alter_indexes_array[$matching_table_structure_diff[$q]]); - unset($remove_indexes_array[$matching_table_structure_diff[$q]]); - } - } - /** - * Applying the data difference. First checks if structure diff is applied or not. - * If not, then apply structure difference first then apply data difference. - */ - for ($p = 0; $p < sizeof($matching_table_data_diff); $p++) { - if ($_REQUEST['checked'] == 'true') { - PMA_findDeleteRowsFromTargetTables($delete_array, $matching_tables, - $matching_table_data_diff[$p], $target_tables_keys, - $matching_tables_keys, $trg_db, $trg_link, $src_db, $src_link); - - if (isset($delete_array[$matching_table_data_diff[$p]])) { - PMA_deleteFromTargetTable($trg_db, $trg_link, $matching_tables, - $matching_table_data_diff[$p], $target_tables_keys, - $delete_array, false); - - unset($delete_array[$matching_table_data_diff[$p]]); - } - } - if (isset($alter_str_array[$matching_table_data_diff[$p]])) { - PMA_alterTargetTableStructure($trg_db, $trg_link, $matching_tables, - $source_columns, $alter_str_array, $matching_tables_fields, - $criteria, $matching_tables_keys, $target_tables_keys, - $matching_table_data_diff[$p], false); - - unset($alter_str_array[$matching_table_data_diff[$p]]); - } - if (isset($add_column_array[$matching_table_data_diff[$p]])) { - PMA_findDeleteRowsFromTargetTables($delete_array, $matching_tables, - $matching_table_data_diff[$p], $target_tables_keys, - $matching_tables_keys, $trg_db, $trg_link, $src_db, $src_link); - - if (isset($delete_array[$matching_table_data_diff[$p]])) { - PMA_deleteFromTargetTable($trg_db, $trg_link, $matching_tables, - $matching_table_data_diff[$p], $target_tables_keys, - $delete_array, false); - - unset($delete_array[$matching_table_data_diff[$p]]); - } - PMA_addColumnsInTargetTable($src_db, $trg_db, $src_link, $trg_link, - $matching_tables, $source_columns, $add_column_array, - $matching_tables_fields, $criteria, $matching_tables_keys, - $target_tables_keys, $uncommon_tables, $uncommon_tables_fields, - $matching_table_data_diff[$p], $uncommon_cols, false); - - unset($add_column_array[$matching_table_data_diff[$p]]); - } - if (isset($uncommon_columns[$matching_table_data_diff[$p]])) { - PMA_removeColumnsFromTargetTable($trg_db, $trg_link, $matching_tables, - $uncommon_columns, $matching_table_data_diff[$p], false); - - unset($uncommon_columns[$matching_table_data_diff[$p]]); - } - if ((isset($matching_table_structure_diff[$q]) - && isset($add_indexes_array[$matching_table_structure_diff[$q]])) - || (isset($matching_table_structure_diff[$q]) - && isset($remove_indexes_array[$matching_table_structure_diff[$q]])) - || (isset($matching_table_structure_diff[$q]) - && isset($alter_indexes_array[$matching_table_structure_diff[$q]])) - ) { - PMA_applyIndexesDiff ($trg_db, $trg_link, $matching_tables, - $source_indexes, $target_indexes, $add_indexes_array, - $alter_indexes_array, $remove_indexes_array, - $matching_table_structure_diff[$q], false); - - unset($add_indexes_array[$matching_table_structure_diff[$q]]); - unset($alter_indexes_array[$matching_table_structure_diff[$q]]); - unset($remove_indexes_array[$matching_table_structure_diff[$q]]); - } - /** - * Applying the data difference. - */ - PMA_updateTargetTables($matching_tables, $update_array, $src_db, $trg_db, - $trg_link, $matching_table_data_diff[$p], $matching_tables_keys, false); - - PMA_insertIntoTargetTable($matching_tables, $src_db, $trg_db, $src_link, - $trg_link, $matching_tables_fields, $insert_array, - $matching_table_data_diff[$p], $matching_tables_keys, $source_columns, - $add_column_array, $criteria, $target_tables_keys, $uncommon_tables, - $uncommon_tables_fields, $uncommon_cols, $alter_str_array, - $source_indexes, $target_indexes, $add_indexes_array, - $alter_indexes_array, $delete_array, $update_array, false); - } - /** - * Updating the session variables to the latest values of the arrays. - */ - $_SESSION['delete_array'] = $delete_array; - $_SESSION['uncommon_columns'] = $uncommon_columns; - $_SESSION['alter_str_array'] = $alter_str_array; - $_SESSION['add_column_array'] = $add_column_array; - $_SESSION['add_indexes_array'] = $add_indexes_array; - $_SESSION['remove_indexes_array'] = $remove_indexes_array; - $_SESSION['insert_array'] = $insert_array; - $_SESSION['update_array'] = $update_array; - - /** - * Applying structure difference to selected non-matching tables - * (present in Source but absent from Target). - */ - for ($s = 0; $s < sizeof($uncommon_table_structure_diff); $s++) { - PMA_createTargetTables($src_db, $trg_db, $src_link, $trg_link, - $uncommon_tables, $uncommon_table_structure_diff[$s], - $uncommon_tables_fields, false); - $_SESSION['uncommon_tables_fields'] = $uncommon_tables_fields; - - unset($uncommon_tables[$uncommon_table_structure_diff[$s]]); - } - /** - * Applying data difference to selected non-matching tables - * (present in Source but absent from Target). - * Before data synchronization, structure synchronization is confirmed. - */ - for ($r = 0; $r < sizeof($uncommon_table_data_diff); $r++) { - if (!(in_array($uncommon_table_data_diff[$r], $uncommon_table_structure_diff))) { - if (isset($uncommon_tables[$uncommon_table_data_diff[$r]])) { - PMA_createTargetTables($src_db, $trg_db, $src_link, $trg_link, - $uncommon_tables, $uncommon_table_data_diff[$r], - $uncommon_tables_fields, false); - $_SESSION['uncommon_tables_fields'] = $uncommon_tables_fields; - - unset($uncommon_tables[$uncommon_table_data_diff[$r]]); - } - } - PMA_populateTargetTables($src_db, $trg_db, $src_link, $trg_link, - $source_tables_uncommon, $uncommon_table_data_diff[$r], - $_SESSION['uncommon_tables_fields'], false); - - unset($row_count[$uncommon_table_data_diff[$r]]); - } - /** - * Again all the tables from source and target database are displayed with their differences. - * The differences have been removed from tables that have been synchronized - */ - echo '
    ' - . PMA_generate_common_hidden_inputs('', ''); - - PMA_syncDisplayHeaderCompare($src_db, $trg_db); - $rows = array(); - for ($i = 0; $i < count($matching_tables); $i++) { - $num_alter_cols = 0; - $num_insert_cols = 0; - $num_remove_cols = 0; - $num_add_index = 0; - $num_remove_index = 0; - - if (isset($alter_str_array[$i])) { - $num_alter_cols = sizeof($alter_str_array[$i]); - } - if (isset($add_column_array[$i])) { - $num_insert_cols = sizeof($add_column_array[$i]); - } - if (isset($uncommon_columns[$i])) { - $num_remove_cols = sizeof($uncommon_columns[$i]); - } - if (isset($add_indexes_array[$i])) { - $num_add_index = sizeof($add_indexes_array[$i]); - } - if (isset($remove_indexes_array[$i])) { - $num_remove_index = sizeof($remove_indexes_array[$i]); - } - - $btn_structure_params = null; - $btn_data_params = null; - - if (($num_alter_cols > 0) - || ($num_insert_cols > 0) - || ($num_remove_cols > 0) - || ($num_add_index > 0) - || ($num_remove_index > 0) - ) { - $btn_structure_params = array($i, $num_alter_cols, $num_insert_cols, - $num_remove_cols, $num_add_index, $num_remove_index); - } - if (!(in_array($i, $matching_table_data_diff))) { - if (isset($matching_tables_keys[$i][0]) - && isset($update_array[$i][0][$matching_tables_keys[$i][0]]) - ) { - if (isset($update_array[$i])) { - $num_of_updates = sizeof($update_array[$i]); - } else { - $num_of_updates = 0; - } - } else { - $num_of_updates = 0; - } - if (isset($matching_tables_keys[$i][0]) - && isset($insert_array[$i][0][$matching_tables_keys[$i][0]]) - ) { - if (isset($insert_array[$i])) { - $num_of_insertions = sizeof($insert_array[$i]); - } else { - $num_of_insertions = 0; - } - } else { - $num_of_insertions = 0; - } - - if ((isset($matching_tables_keys[$i][0]) - && isset($update_array[$i][0][$matching_tables_keys[$i][0]])) - || (isset($matching_tables_keys[$i][0]) - && isset($insert_array[$i][0][$matching_tables_keys[$i][0]])) - ) { - $btn_data_params = array($i, $num_of_updates, $num_of_insertions, - null, null, null); - } - } else { - unset($update_array[$i]); - unset($insert_array[$i]); - } - $rows[] = array( - 'src_table_name' => $matching_tables[$i], - 'dst_table_name' => $matching_tables[$i], - 'btn_type' => 'M', - 'btn_structure' => $btn_structure_params, - 'btn_data' => $btn_data_params - ); - } - /** - * placing updated value of arrays in session - * - */ - $_SESSION['update_array'] = $update_array; - $_SESSION['insert_array'] = $insert_array; - - for ($j = 0; $j < count($source_tables_uncommon); $j++) { - $btn_structure_params = null; - $btn_data_params = null; - - /** - * Display the difference only when it has not been applied - */ - if (!(in_array($j, $uncommon_table_structure_diff))) { - if (isset($uncommon_tables[$j])) { - $btn_structure_params = array($j, null, null, null, null, null); - } - $dst_table_name = $source_tables_uncommon[$j] . ' (' . __('not present') . ')'; - } else { - unset($uncommon_tables[$j]); - $dst_table_name = $source_tables_uncommon[$j]; - } - /** - * Display the difference only when it has not been applied - */ - if (!(in_array($j, $uncommon_table_data_diff))) { - if (isset($row_count[$j]) && ($row_count[$j] > 0)) { - $btn_data_params = array($j, null, $row_count[$j], null, null, null); - } - } else { - unset($row_count[$j]); - } - - $rows[] = array( - 'src_table_name' => $source_tables_uncommon[$j], - 'dst_table_name' => $dst_table_name, - 'btn_type' => 'U', - 'btn_structure' => $btn_structure_params, - 'btn_data' => $btn_data_params - ); - } - /** - * placing the latest values of arrays in session - */ - - $_SESSION['uncommon_tables'] = $uncommon_tables; - $_SESSION['uncommon_tables_row_count'] = $row_count; - - - /** - * Displaying the target database tables - */ - foreach ($target_tables_uncommon as $tbl_nc_name) { - $rows[] = array( - 'src_table_name' => '', - 'dst_table_name' => $tbl_nc_name); - } - PMA_syncDisplayDataCompare($rows); - echo ' - - '; - - /** - * This "list" div will contain a table and each row will depict information about - * structure/data difference in tables. - * Rows will be generated dynamically as soon as the colored buttons "D" or "S" - * are clicked. - */ - - echo '
    '; - echo ' - - - - - - - - - - - - - - - - - - - -
    ' . __('Table') . ' ' . __('Structure Difference') . ' ' . __('Data Difference') . '
    ' . __('Table name') . '' . __('Create table'). '' . __('Add column(s)') . '' . __('Remove column(s)') . '' . __('Alter column(s)') . '' . __('Remove index(s)') . '' . __('Apply index(s)') . '' . __('Update row(s)') . '' . __('Insert row(s)') . '
    -
    '; - - /** - * This fieldset displays the checkbox to confirm deletion of previous rows from target tables - */ - echo '
    -

    -
    '; - - echo '
    '; - echo ''; - echo '' - . '
    '; - echo '
    '; -} - -/** -* Displays the page when 'Synchronize Databases' is pressed. -*/ - -if (isset($_REQUEST['synchronize_db'])) { - - $src_db = $_SESSION['src_db']; - $trg_db = $_SESSION['trg_db']; - $update_array = $_SESSION['update_array']; - $insert_array = $_SESSION['insert_array']; - $src_username = $_SESSION['src_username']; - $trg_username = $_SESSION['trg_username']; - $src_password = $_SESSION['src_password']; - $trg_password = $_SESSION['trg_password']; - $matching_tables = $_SESSION['matching_tables']; - $matching_tables_keys = $_SESSION['matching_tables_keys']; - $matching_tables_fields = $_SESSION['matching_fields']; - $source_tables_uncommon = $_SESSION['src_uncommon_tables']; - $uncommon_tables_fields = $_SESSION['uncommon_tables_fields']; - $target_tables_uncommon = $_SESSION['target_tables_uncommon']; - $row_count = $_SESSION['uncommon_tables_row_count']; - $uncommon_tables = $_SESSION['uncommon_tables']; - $target_tables = $_SESSION['target_tables']; - - $delete_array = $_SESSION['delete_array']; - $uncommon_columns = $_SESSION['uncommon_columns']; - $source_columns = $_SESSION['source_columns']; - $alter_str_array = $_SESSION['alter_str_array']; - $criteria = $_SESSION['criteria']; - $target_tables_keys = $_SESSION['target_tables_keys']; - $add_column_array = $_SESSION['add_column_array']; - $add_indexes_array = $_SESSION['add_indexes_array']; - $alter_indexes_array = $_SESSION['alter_indexes_array']; - $remove_indexes_array = $_SESSION['remove_indexes_array']; - $source_indexes = $_SESSION['source_indexes']; - $target_indexes = $_SESSION['target_indexes']; - $uncommon_cols = $uncommon_columns; - - /** - * Display success message. - */ - echo '
    ' - . __('Target database has been synchronized with source database') - . '
    '; - /** - * Displaying all the tables of source and target database - * and now no difference is there. - */ - PMA_syncDisplayHeaderCompare($src_db, $trg_db); - $rows = array(); - for ($i = 0; $i < count($matching_tables); $i++) { - $rows[] = array( - 'src_table_name' => $matching_tables[$i], - 'dst_table_name' => $matching_tables[$i]); - } - foreach ($source_tables_uncommon as $tbl_nc_name) { - $rows[] = array( - 'src_table_name' => '+ ' . $tbl_nc_name, - 'dst_table_name' => $tbl_nc_name); - } - foreach ($target_tables_uncommon as $tbl_nc_name) { - $rows[] = array( - 'src_table_name' => '', - 'dst_table_name' => $tbl_nc_name); - } - PMA_syncDisplayDataCompare($rows); - echo ' - - '; - - /** - * connecting the source and target servers - */ - if ('cur' != $_SESSION['src_type']) { - $src_link = PMA_DBI_connect($src_username, $src_password, $is_controluser = false, $_SESSION['src_server']); - $src_version = PMA_DBI_fetch_value('SELECT VERSION()', 0, 0, $src_link); - $src_is_drizzle = (bool)preg_match('/\d{4}\./', $src_version); - } else { - $src_link = $GLOBALS['userlink']; - $src_version = PMA_MYSQL_STR_VERSION; - $src_is_drizzle = PMA_DRIZZLE; - // working on current server, so initialize this for tracking - // (does not work if user defined current server as a remote one) - $GLOBALS['db'] = $_SESSION['src_db']; - } - if ('cur' != $_SESSION['trg_type']) { - $trg_link = PMA_DBI_connect($trg_username, $trg_password, $is_controluser = false, $_SESSION['trg_server']); - $trg_version = PMA_DBI_fetch_value('SELECT VERSION()', 0, 0, $trg_link); - $trg_is_drizzle = (bool)preg_match('/\d{4}\./', $trg_version); - } else { - $trg_link = $GLOBALS['userlink']; - $trg_version = PMA_MYSQL_STR_VERSION; - $trg_is_drizzle = PMA_DRIZZLE; - // working on current server, so initialize this for tracking - $GLOBALS['db'] = $_SESSION['trg_db']; - } - - /** - * Displaying the queries. - */ - echo '
    ' . __('Executed queries') . ''; - /** - * Applying all sorts of differences for each matching table - */ - for ($p = 0; $p < sizeof($matching_tables); $p++) { - /** - * If the check box is checked for deleting previous rows from the target database tables then - * first find out rows to be deleted and then delete the rows. - */ - if (isset($_REQUEST['delete_rows'])) { - PMA_findDeleteRowsFromTargetTables($delete_array, $matching_tables, $p, - $target_tables_keys, $matching_tables_keys, - $trg_db, $trg_link, $src_db, $src_link); - - if (isset($delete_array[$p])) { - PMA_deleteFromTargetTable($trg_db, $trg_link, $matching_tables, $p, - $target_tables_keys, $delete_array, true); - unset($delete_array[$p]); - } - } - if (isset($alter_str_array[$p])) { - PMA_alterTargetTableStructure($trg_db, $trg_link, $matching_tables, - $source_columns, $alter_str_array, $matching_tables_fields, - $criteria, $matching_tables_keys, $target_tables_keys, $p, true); - unset($alter_str_array[$p]); - } - if (! empty($add_column_array[$p])) { - PMA_findDeleteRowsFromTargetTables($delete_array, $matching_tables, $p, - $target_tables_keys, $matching_tables_keys, - $trg_db, $trg_link, $src_db, $src_link); - - if (isset($delete_array[$p])) { - PMA_deleteFromTargetTable($trg_db, $trg_link, $matching_tables, $p, - $target_tables_keys, $delete_array, true); - unset($delete_array[$p]); - } - PMA_addColumnsInTargetTable($src_db, $trg_db, $src_link, $trg_link, - $matching_tables, $source_columns, $add_column_array, - $matching_tables_fields, $criteria, $matching_tables_keys, - $target_tables_keys, $uncommon_tables, $uncommon_tables_fields, - $p, $uncommon_cols, true); - unset($add_column_array[$p]); - } - if (isset($uncommon_columns[$p])) { - PMA_removeColumnsFromTargetTable($trg_db, $trg_link, $matching_tables, - $uncommon_columns, $p, true); - unset($uncommon_columns[$p]); - } - if (isset($matching_table_structure_diff) - && (isset($add_indexes_array[$matching_table_structure_diff[$p]]) - || isset($remove_indexes_array[$matching_table_structure_diff[$p]]) - || isset($alter_indexes_array[$matching_table_structure_diff[$p]])) - ) { - PMA_applyIndexesDiff ($trg_db, $trg_link, $matching_tables, - $source_indexes, $target_indexes, $add_indexes_array, - $alter_indexes_array, $remove_indexes_array, - $matching_table_structure_diff[$p], true); - - unset($add_indexes_array[$matching_table_structure_diff[$p]]); - unset($alter_indexes_array[$matching_table_structure_diff[$p]]); - unset($remove_indexes_array[$matching_table_structure_diff[$p]]); - } - - PMA_updateTargetTables($matching_tables, $update_array, $src_db, $trg_db, - $trg_link, $p, $matching_tables_keys, true); - - PMA_insertIntoTargetTable( - $matching_tables, $src_db, $trg_db, $src_link, - $trg_link, $matching_tables_fields, $insert_array, $p, - $matching_tables_keys, $matching_tables_keys, $source_columns, - $add_column_array, $criteria, $target_tables_keys, $uncommon_tables, - $uncommon_tables_fields, $uncommon_cols, $alter_str_array, $source_indexes, - $target_indexes, $add_indexes_array, - $alter_indexes_array, $delete_array, $update_array, true - ); - } - - /** - * Creating and populating tables present in source but absent - * from target database. - */ - for ($q = 0; $q < sizeof($source_tables_uncommon); $q++) { - if (isset($uncommon_tables[$q])) { - PMA_createTargetTables($src_db, $trg_db, $src_link, $trg_link, - $source_tables_uncommon, $q, $uncommon_tables_fields, true); - } - if (isset($row_count[$q])) { - PMA_populateTargetTables($src_db, $trg_db, $src_link, $trg_link, - $source_tables_uncommon, $q, $uncommon_tables_fields, true); - } - } - echo "
    "; -} - -/** - * Displays the main page when none of the following buttons is pressed - */ - -if (! isset($_REQUEST['submit_connect']) - && ! isset($_REQUEST['synchronize_db']) - && ! isset($_REQUEST['Table_ids']) -) { -/** -* Displays the sub-page heading -*/ - echo '

    ' . ($GLOBALS['cfg']['MainPageIconic'] - ? PMA_getImage('s_sync.png') - : '') - . __('Synchronize') - .'

    '; - - echo '
    -
    ' // TODO: add check if all var. are filled in - . PMA_generate_common_hidden_inputs('', ''); - echo '
    '; - echo '' . __('Synchronize') . ''; - /** - * Displays the forms - */ - - $databases = PMA_DBI_get_databases_full(null, false, null, 'SCHEMA_NAME', - 'ASC', 0, true); - - $databases_to_hide = array( - 'information_schema', - 'mysql' - ); - if (PMA_DRIZZLE) { - $databases_to_hide[] = 'data_dictionary'; - } - - if ($GLOBALS['cfg']['AllowArbitraryServer'] === false) { - $possibly_readonly = ' readonly="readonly"'; - } else { - $possibly_readonly = ''; - } - - foreach ($cons as $type) { - if ('src' == $type) { - $database_header = __('Source database'); - } else { - $database_header = __('Target database'); - } - - $database_header .= PMA_showHint(PMA_sanitize(sprintf('%sAllowArbitraryServer%s', - '[a@./Documentation.html#AllowArbitraryServer@_blank]', '[/a]'))); -?> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -
    />
    value="3306" maxlength="5" size="5" />
    />
    '; - } - unset ($types, $type); - - echo ' -
    -
    - -
    -
    -
    -
    ' . __('Target database will be completely synchronized with source database. Source database will remain unchanged.') . '
    '; -} - - /** - * Displays the footer - */ -require './libraries/footer.inc.php'; -?> diff --git a/phpMyAdmin/tbl_alter.php b/phpMyAdmin/tbl_alter.php deleted file mode 100644 index 344d65a..0000000 --- a/phpMyAdmin/tbl_alter.php +++ /dev/null @@ -1,208 +0,0 @@ - updates the table - */ -$abort = false; -if (isset($_REQUEST['do_save_data'])) { - $field_cnt = count($_REQUEST['field_orig']); - $key_fields = array(); - $changes = array(); - - for ($i = 0; $i < $field_cnt; $i++) { - $changes[] = 'CHANGE ' . PMA_Table::generateAlter( - $_REQUEST['field_orig'][$i], - $_REQUEST['field_name'][$i], - $_REQUEST['field_type'][$i], - $_REQUEST['field_length'][$i], - $_REQUEST['field_attribute'][$i], - isset($_REQUEST['field_collation'][$i]) - ? $_REQUEST['field_collation'][$i] - : '', - isset($_REQUEST['field_null'][$i]) - ? $_REQUEST['field_null'][$i] - : 'NOT NULL', - $_REQUEST['field_default_type'][$i], - $_REQUEST['field_default_value'][$i], - isset($_REQUEST['field_extra'][$i]) - ? $_REQUEST['field_extra'][$i] - : false, - isset($_REQUEST['field_comments'][$i]) - ? $_REQUEST['field_comments'][$i] - : '', - $key_fields, - $i, - $_REQUEST['field_default_orig'][$i] - ); - } // end for - - // Builds the primary keys statements and updates the table - $key_query = ''; - /** - * this is a little bit more complex - * - * @todo if someone selects A_I when altering a column we need to check: - * - no other column with A_I - * - the column has an index, if not create one - * - if (count($key_fields)) { - $fields = array(); - foreach ($key_fields as $each_field) { - if (isset($_REQUEST['field_name'][$each_field]) && strlen($_REQUEST['field_name'][$each_field])) { - $fields[] = PMA_backquote($_REQUEST['field_name'][$each_field]); - } - } // end for - $key_query = ', ADD KEY (' . implode(', ', $fields) . ') '; - } - */ - - // To allow replication, we first select the db to use and then run queries - // on this db. - PMA_DBI_select_db($db) or PMA_mysqlDie(PMA_DBI_getError(), 'USE ' . PMA_backquote($db) . ';', '', $err_url); - $sql_query = 'ALTER TABLE ' . PMA_backquote($table) . ' ' . implode(', ', $changes) . $key_query; - $result = PMA_DBI_try_query($sql_query); - - if ($result !== false) { - $message = PMA_Message::success(__('Table %1$s has been altered successfully')); - $message->addParam($table); - $btnDrop = 'Fake'; - - /** - * If comments were sent, enable relation stuff - */ - include_once './libraries/transformations.lib.php'; - - // updaet field names in relation - if (isset($_REQUEST['field_orig']) && is_array($_REQUEST['field_orig'])) { - foreach ($_REQUEST['field_orig'] as $fieldindex => $fieldcontent) { - if ($_REQUEST['field_name'][$fieldindex] != $fieldcontent) { - PMA_REL_renameField($db, $table, $fieldcontent, - $_REQUEST['field_name'][$fieldindex]); - } - } - } - - // update mime types - if (isset($_REQUEST['field_mimetype']) - && is_array($_REQUEST['field_mimetype']) - && $cfg['BrowseMIME']) { - foreach ($_REQUEST['field_mimetype'] as $fieldindex => $mimetype) { - if (isset($_REQUEST['field_name'][$fieldindex]) - && strlen($_REQUEST['field_name'][$fieldindex])) { - PMA_setMIME($db, $table, $_REQUEST['field_name'][$fieldindex], - $mimetype, - $_REQUEST['field_transformation'][$fieldindex], - $_REQUEST['field_transformation_options'][$fieldindex]); - } - } - } - - if ( $_REQUEST['ajax_request'] == true) { - $extra_data['sql_query'] = PMA_showMessage(null, $sql_query); - PMA_ajaxResponse($message, $message->isSuccess(), $extra_data); - } - - $active_page = 'tbl_structure.php'; - include './tbl_structure.php'; - } else { - PMA_mysqlDie('', '', '', $err_url, false); - // An error happened while inserting/updating a table definition. - // to prevent total loss of that data, we embed the form once again. - // The variable $regenerate will be used to restore data in libraries/tbl_properties.inc.php - if (isset($_REQUEST['orig_field'])) { - $_REQUEST['field'] = $_REQUEST['orig_field']; - } - - $regenerate = true; - } -} - -/** - * No modifications yet required -> displays the table fields - * - * $selected comes from multi_submits.inc.php - */ -if ($abort == false) { - if ($_REQUEST['ajax_request'] != true) { - include_once './libraries/tbl_links.inc.php'; - } - - if (! isset($selected)) { - PMA_checkParameters(array('field')); - $selected[] = $_REQUEST['field']; - $selected_cnt = 1; - } else { // from a multiple submit - $selected_cnt = count($selected); - } - - /** - * @todo optimize in case of multiple fields to modify - */ - for ($i = 0; $i < $selected_cnt; $i++) { - $fields_meta[] = PMA_DBI_get_columns($db, $table, $selected[$i], true); - } - $num_fields = count($fields_meta); - $action = 'tbl_alter.php'; - - // Get more complete field information. - // For now, this is done to obtain MySQL 4.1.2+ new TIMESTAMP options - // and to know when there is an empty DEFAULT value. - // Later, if the analyser returns more information, it - // could be executed to replace the info given by SHOW FULL COLUMNS FROM. - /** - * @todo put this code into a require() - * or maybe make it part of PMA_DBI_get_columns(); - */ - - // We also need this to correctly learn if a TIMESTAMP is NOT NULL, since - // SHOW FULL COLUMNS says NULL and SHOW CREATE TABLE says NOT NULL (tested - // in MySQL 4.0.25). - - $show_create_table = PMA_DBI_fetch_value('SHOW CREATE TABLE ' . PMA_backquote($db) . '.' . PMA_backquote($table), 0, 1); - $analyzed_sql = PMA_SQP_analyze(PMA_SQP_parse($show_create_table)); - unset($show_create_table); - /** - * Form for changing properties. - */ - include './libraries/tbl_properties.inc.php'; -} - - -/** - * Displays the footer - */ -require './libraries/footer.inc.php'; -?>