MatterControlApplication.cs

/*
Copyright (c) 2014, Lars Brubaker, Kevin Pope
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met: 

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer. 
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution. 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies, 
either expressed or implied, of the FreeBSD Project.
*/

using System;
using System.Text.RegularExpressions;
using System.Collections.Generic;
using System.Diagnostics;
using System.Globalization;
using System.IO;
using System.Text;
using System.Threading;
using MatterHackers.Agg;
using MatterHackers.Agg.UI;
using MatterHackers.Localizations;
using MatterHackers.MatterControl.DataStorage;
using MatterHackers.MatterControl.PartPreviewWindow;
using MatterHackers.MatterControl.PluginSystem;
using MatterHackers.MatterControl.PrinterCommunication;
using MatterHackers.MatterControl.PrintQueue;
using MatterHackers.MatterControl.SettingsManagement;
using MatterHackers.MatterControl.SlicerConfiguration;
using MatterHackers.VectorMath;
using MatterHackers.PolygonMesh.Processors;
using MatterHackers.MatterControl.CreatorPlugins;
using MatterHackers.Agg.PlatformAbstract;

namespace MatterHackers.MatterControl
{
    public class MatterControlApplication : SystemWindow
    {
        string[] commandLineArgs = null;
        bool firstDraw = true;
        bool ShowMemoryUsed = false;
        bool DoCGCollectEveryDraw = false;
        public bool RestartOnClose = false;        

        static readonly Vector2 minSize = new Vector2(600, 600);

		static MatterControlApplication instance;
		public static MatterControlApplication Instance
		{
			get
			{
				if(instance == null)
				{
					// try and open our window matching the last size that we had for it.
					string windowSize = ApplicationSettings.Instance.get("WindowSize");
					int width = 1280;
					int height = 720;
					if (windowSize != null && windowSize != "")
					{
						string[] sizes = windowSize.Split(',');
						width = Math.Max(int.Parse(sizes[0]), (int)minSize.x+1);
						height = Math.Max(int.Parse(sizes[1]), (int)minSize.y+1);
					}

					bool showWindow;
					instance = new MatterControlApplication(width, height, out showWindow);

					if (showWindow)
					{
						instance.ShowAsSystemWindow();
					}
				}

				return instance;
			}
		}

        static MatterControlApplication()
        {
            // Because fields on this class call localization methods and because those methods depend on the StaticData provider and because the field 
            // initializers run before the class constructor, we need to init the platform specific provider in the static constructor (or write a custom initializer method)
            //
            // Initialize a standard file system backed StaticData provider
            StaticData.Instance = new MatterHackers.Agg.FileSystemStaticData();
        }

		public void LaunchBrowser(string targetUri)
		{
			UiThread.RunOnIdle((state) =>
			{
				System.Diagnostics.Process.Start(targetUri);
			});
		}

        public void OpenCameraPreview()
        {
            //Camera launcher placeholder (KP)
            if (ApplicationSettings.Instance.get("HardwareHasCamera") == "true")
            {
                //Do something
            }
            else
            {
                //Do something else (like show warning message)
            }
        }

        public void PlaySound(string fileName)
        {
            using (var mediaStream = StaticData.Instance.OpenSteam(Path.Combine("Sounds", fileName)))
            {
                (new System.Media.SoundPlayer(mediaStream)).Play();
            }
        }

        private MatterControlApplication(double width, double height, out bool showWindow)
            : base(width, height)
        {
			showWindow = false;
 
            // set this at startup so that we can tell next time if it got set to true in close
            UserSettings.Instance.Fields.StartCount = UserSettings.Instance.Fields.StartCount + 1;

            this.commandLineArgs = Environment.GetCommandLineArgs();
            Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;

            for(int currentCommandIndex = 0; currentCommandIndex < commandLineArgs.Length; currentCommandIndex++)
            {
                string command = commandLineArgs[currentCommandIndex];
				string commandUpper = command.ToUpper();
                switch (commandUpper)
                {
                    case "TEST":
                        Testing.TestingDispatch testDispatch = new Testing.TestingDispatch();
                        testDispatch.RunTests();
                        return;

					case "MHSERIAL_TO_ANDROID":
						{
							Dictionary<string, string> vidPid_NameDictionary = new Dictionary<string, string>();
							string[] MHSerialLines = File.ReadAllLines(Path.Combine("..", "..", "StaticData", "Drivers", "MHSerial", "MHSerial.inf"));
							foreach (string line in MHSerialLines)
							{
								if (line.Contains("=DriverInstall,"))
								{
									string name = Regex.Match(line, "%(.*).name").Groups[1].Value;
									string vid = Regex.Match(line, "VID_(.*)&PID").Groups[1].Value;
									string pid = Regex.Match(line, "PID_([0-9a-fA-F]+)").Groups[1].Value;
									string vidPid = "{0},{1}".FormatWith(vid, pid);
									if (!vidPid_NameDictionary.ContainsKey(vidPid))
									{
										vidPid_NameDictionary.Add(vidPid, name);
									}
								}
							}

							using (StreamWriter deviceFilter = new StreamWriter("deviceFilter.txt"))
							{
								using (StreamWriter serialPort = new StreamWriter("serialPort.txt"))
								{
									foreach (KeyValuePair<string, string> vidPid_Name in vidPid_NameDictionary)
									{
										string[] vidPid = vidPid_Name.Key.Split(',');
										int vid = Int32.Parse(vidPid[0], System.Globalization.NumberStyles.HexNumber);
										int pid = Int32.Parse(vidPid[1], System.Globalization.NumberStyles.HexNumber);
										serialPort.WriteLine("customTable.AddProduct(0x{0:X4}, 0x{1:X4}, cdcDriverType);  // {2}".FormatWith(vid, pid, vidPid_Name.Value));
										deviceFilter.WriteLine("<!-- {2} -->\n<usb-device vendor-id=\"{0}\" product-id=\"{1}\" />".FormatWith(vid, pid, vidPid_Name.Value));
									}
								}
							}
						}
						return;

                    case "CLEAR_CACHE":
                        AboutPage.DeleteCacheData();
                        break;

                    case "SHOW_MEMORY":
                        ShowMemoryUsed = true;
                        break;

                    case "DO_GC_COLLECT_EVERY_DRAW":
                        ShowMemoryUsed = true;
                        DoCGCollectEveryDraw = true;
                        break;

                    case "CREATE_AND_SELECT_PRINTER":
                        if (currentCommandIndex + 1 < commandLineArgs.Length)
                        {
                            currentCommandIndex++;
                            string argument = commandLineArgs[currentCommandIndex];
                            string[] printerData = argument.Split(',');
                            if (printerData.Length == 2)
                            {
                                Printer ActivePrinter = new Printer();

                                ActivePrinter.Name = "Auto: {0} {1}".FormatWith(printerData[0], printerData[1]);
                                ActivePrinter.Make = printerData[0];
                                ActivePrinter.Model = printerData[1];

                                PrinterSetupStatus test = new PrinterSetupStatus(ActivePrinter);
                                test.LoadDefaultSliceSettings(ActivePrinter.Make, ActivePrinter.Model);
                                ActivePrinterProfile.Instance.ActivePrinter = ActivePrinter;
                            }
                        }
                        break;

                }

                if (MeshFileIo.ValidFileExtensions().Contains(Path.GetExtension(command).ToUpper()))
                {
                    // If we are the only instance running then do nothing.
                    // Else send these to the running instance so it can load them.
                }
            }

            //WriteTestGCodeFile();
#if !DEBUG
            if (File.Exists("RunUnitTests.txt"))
#endif
            {
#if IS_WINDOWS_FORMS
                Clipboard.SetSystemClipboardFunctions(System.Windows.Forms.Clipboard.GetText, System.Windows.Forms.Clipboard.SetText, System.Windows.Forms.Clipboard.ContainsText);
#endif

                MatterHackers.PolygonMesh.UnitTests.UnitTests.Run();
                MatterHackers.RayTracer.UnitTests.Run();
                MatterHackers.Agg.Tests.UnitTests.Run();
                MatterHackers.VectorMath.Tests.UnitTests.Run();
                MatterHackers.Agg.UI.Tests.UnitTests.Run();

                // you can turn this on to debug some bounds issues
                //GuiWidget.DebugBoundsUnderMouse = true;
            }

            GuiWidget.DefaultEnforceIntegerBounds = true;

            if (ActiveTheme.Instance.DisplayMode == ActiveTheme.ApplicationDisplayType.Touchscreen)
            {
                TextWidget.GlobalPointSizeScaleRatio = 1.3;
            }

			this.AddChild(ApplicationController.Instance.MainView);
            this.MinimumSize = minSize;
            this.Padding = new BorderDouble(0); //To be re-enabled once native borders are turned off

#if false // this is to test freeing gcodefile memory
            Button test = new Button("test");
            test.Click += (sender, e) =>
            {
                //MatterHackers.GCodeVisualizer.GCodeFile gcode = new GCodeVisualizer.GCodeFile();
                //gcode.Load(@"C:\Users\lbrubaker\Downloads\drive assy.gcode");
                SystemWindow window = new SystemWindow(100, 100);
                window.ShowAsSystemWindow();
            };
            allControls.AddChild(test);
#endif
            this.AnchorAll();

            UseOpenGL = true;
            string version = "1.2";

            Title = "MatterControl {0}".FormatWith(version);
            if (OemSettings.Instance.WindowTitleExtra != null && OemSettings.Instance.WindowTitleExtra.Trim().Length > 0)
            {
                Title = Title + " - {1}".FormatWith(version, OemSettings.Instance.WindowTitleExtra);
            }

            UiThread.RunOnIdle(CheckOnPrinter);

            string desktopPosition = ApplicationSettings.Instance.get("DesktopPosition");
            if (desktopPosition != null && desktopPosition != "")
            {
                string[] sizes = desktopPosition.Split(',');

                //If the desktop position is less than -10,-10, override
                int xpos = Math.Max(int.Parse(sizes[0]), -10);                
                int ypos = Math.Max(int.Parse(sizes[1]), -10);
                DesktopPosition = new Point2D(xpos, ypos);
            }

			showWindow = true;
        }

		private static void WriteMove(StreamWriter file, Vector2 center)
        {
			file.WriteLine("G1 X" + center.x.ToString() + " Y" + center.y.ToString());
        }

        public static void WriteTestGCodeFile()
        {
			using (StreamWriter file = new StreamWriter("PerformanceTest.gcode"))
			{
				//int loops = 150000;
				int loops = 150;
				int steps = 200;
				double radius = 50;
				Vector2 center = new Vector2(150, 100);

				file.WriteLine("G28 ; home all axes");
				file.WriteLine("G90 ; use absolute coordinates");
				file.WriteLine("G21 ; set units to millimeters");
				file.WriteLine("G92 E0");
				file.WriteLine("G1 F7800");
				file.WriteLine("G1 Z" + (5).ToString());
				WriteMove(file, center);

				for (int loop = 0; loop < loops; loop++)
				{
					for (int step = 0; step < steps; step++)
					{
						Vector2 nextPosition = new Vector2(radius, 0);
						nextPosition.Rotate(MathHelper.Tau / steps * step);
						WriteMove(file, center + nextPosition);
					}
				}

				file.WriteLine("M84     ; disable motors");
			}
        }

        void CheckOnPrinter(object state)
        {
            PrinterConnectionAndCommunication.Instance.OnIdle();
            UiThread.RunOnIdle(CheckOnPrinter);
        }

        public override void OnParentChanged(EventArgs e)
        {
            if (File.Exists("RunUnitTests.txt"))
            {
                //DiagnosticWidget diagnosticView = new DiagnosticWidget(this);
            }

            base.OnParentChanged(e);

            // now that we are all set up lets load our plugins and allow them their chance to set things up
            FindAndInstantiatePlugins();
        }

        private void FindAndInstantiatePlugins()
        {
#if false
            string pluginDirectory = Path.Combine("..", "..", "..", "MatterControlPlugins", "bin");
#if DEBUG
            pluginDirectory = Path.Combine(pluginDirectory, "Debug");
#else
            pluginDirectory = Path.Combine(pluginDirectory, "Release");
#endif
            if (!Directory.Exists(pluginDirectory))
            {
                string dataPath = DataStorage.ApplicationDataStorage.Instance.ApplicationUserDataPath;
                pluginDirectory = Path.Combine(dataPath, "Plugins");
            }
            // TODO: this should look in a plugin folder rather than just the application directory (we probably want it in the user folder).
            PluginFinder<MatterControlPlugin> pulginFinder = new PluginFinder<MatterControlPlugin>(pluginDirectory);
#else
            PluginFinder<MatterControlPlugin> pulginFinder = new PluginFinder<MatterControlPlugin>();
#endif

            string oemName = ApplicationSettings.Instance.GetOEMName();
            foreach (MatterControlPlugin plugin in pulginFinder.Plugins)
            {
                string pluginInfo = plugin.GetPluginInfoJSon();
                Dictionary<string, string> nameValuePairs = Newtonsoft.Json.JsonConvert.DeserializeObject<Dictionary<string, string>>(pluginInfo);

                if (nameValuePairs != null && nameValuePairs.ContainsKey("OEM"))
                {
                    if (nameValuePairs["OEM"] == oemName)
                    {
                        plugin.Initialize(this);
                    }
                }
                else
                {
                    plugin.Initialize(this);
                }
            }
        }

        Stopwatch totalDrawTime = new Stopwatch();
        int drawCount = 0;

        AverageMillisecondTimer millisecondTimer = new AverageMillisecondTimer();

        Gaming.Game.DataViewGraph msGraph = new Gaming.Game.DataViewGraph(new Vector2(20, 500), 50, 50, 0, 200);
        public override void OnDraw(Graphics2D graphics2D)
        {
            totalDrawTime.Restart();
            GuiWidget.DrawCount = 0;
            base.OnDraw(graphics2D);
            totalDrawTime.Stop();

            millisecondTimer.Update((int)totalDrawTime.ElapsedMilliseconds);

            if (ShowMemoryUsed)
            {
                long memory = GC.GetTotalMemory(false);
                this.Title = "Allocated = {0:n0} : {1:000}ms, d{2} Size = {3}x{4}, onIdle = {5:00}:{6:00}, drawCount = {7}".FormatWith(memory, millisecondTimer.GetAverage(), drawCount++, this.Width, this.Height, UiThread.CountExpired, UiThread.Count, GuiWidget.DrawCount);
                if (DoCGCollectEveryDraw)
                {
                    GC.Collect();
                }
            }

            if (firstDraw)
            {
                UiThread.RunOnIdle(DoAutoConnectIfRequired);

                firstDraw = false;
                foreach (string arg in commandLineArgs)
                {
                    string argExtension = Path.GetExtension(arg).ToUpper();
                    if (argExtension.Length > 1
                        && MeshFileIo.ValidFileExtensions().Contains(argExtension))
                    {
                        QueueData.Instance.AddItem(new PrintItemWrapper(new DataStorage.PrintItem(Path.GetFileName(arg), Path.GetFullPath(arg))));
                    }
                }

                TerminalWindow.ShowIfLeftOpen();

#if false
                foreach (CreatorInformation creatorInfo in RegisteredCreators.Instance.Creators)
                {
                    if (creatorInfo.description.Contains("Image"))
                    {
                        creatorInfo.functionToLaunchCreator(null, null);
                    }
                }
#endif
            }

            //msGraph.AddData("ms", totalDrawTime.ElapsedMilliseconds);
            //msGraph.Draw(MatterHackers.Agg.Transform.Affine.NewIdentity(), graphics2D);
        }

        public void DoAutoConnectIfRequired(object state)
        {
            ActivePrinterProfile.CheckForAndDoAutoConnect();
        }

        public override void OnMouseMove(MouseEventArgs mouseEvent)
        {
            if (GuiWidget.DebugBoundsUnderMouse)
            {
                Invalidate();
            }
            base.OnMouseMove(mouseEvent);
        }

        [STAThread]
        public static void Main()
        {
            // Make sure we have the right woring directory as we assume everything relative to the executable.
            Directory.SetCurrentDirectory(Path.GetDirectoryName(System.Reflection.Assembly.GetEntryAssembly().Location));

            Datastore.Instance.Initialize();

			MatterControlApplication app = MatterControlApplication.Instance;
        }

        public override void OnClosed(EventArgs e)
        {
            UserSettings.Instance.Fields.StartCountDurringExit = UserSettings.Instance.Fields.StartCount;

            TerminalWindow.CloseIfOpen();
            PrinterConnectionAndCommunication.Instance.Disable();
            //Close connection to the local datastore
            Datastore.Instance.Exit();
            PrinterConnectionAndCommunication.Instance.HaltConnectionThread();
            SlicingQueue.Instance.ShutDownSlicingThread();
            ApplicationController.Instance.OnApplicationClosed();

            if (RestartOnClose)
            {
                string appPathAndFile = System.Reflection.Assembly.GetExecutingAssembly().Location;
                string pathToAppFolder = Path.GetDirectoryName(appPathAndFile);

                ProcessStartInfo runAppLauncherStartInfo = new ProcessStartInfo();
                runAppLauncherStartInfo.Arguments = "\"{0}\" \"{1}\"".FormatWith(appPathAndFile, 1000);
                runAppLauncherStartInfo.FileName = Path.Combine(pathToAppFolder, "Launcher.exe");
                runAppLauncherStartInfo.WindowStyle = ProcessWindowStyle.Hidden;
                runAppLauncherStartInfo.CreateNoWindow = true;

                Process.Start(runAppLauncherStartInfo);
            }
            base.OnClosed(e);
        }

        string unableToExitMessage = "Oops! You cannot exit while a print is active.".Localize();
        string unableToExitTitle = "Unable to Exit".Localize();
        string savePartsSheetExitAnywayMessage = "You are currently saving a parts sheet, are you sure you want to exit?".Localize();
        string confirmExit = "Confirm Exit".Localize();
        public override void OnClosing(out bool CancelClose)
        {
            // save the last size of the window so we can restore it next time.
            ApplicationSettings.Instance.set("WindowSize", string.Format("{0},{1}", Width, Height));
            ApplicationSettings.Instance.set("DesktopPosition", string.Format("{0},{1}", DesktopPosition.x, DesktopPosition.y));

            //Save a snapshot of the prints in queue
            QueueData.Instance.SaveDefaultQueue();

            if (PrinterConnectionAndCommunication.Instance.PrinterIsPrinting)
            {
                StyledMessageBox.ShowMessageBox(null, unableToExitMessage, unableToExitTitle);
                CancelClose = true;
            }
            else if (PartsSheet.IsSaving())
            {
                StyledMessageBox.ShowMessageBox(onConfirmExit, savePartsSheetExitAnywayMessage, confirmExit, StyledMessageBox.MessageType.YES_NO);
                CancelClose = true;
            }
            else
            {
                base.OnClosing(out CancelClose);
            }
        }

        void onConfirmExit(bool messageBoxResponse)
        {
            bool CancelClose;
            if (messageBoxResponse)
            {
                base.OnClosing(out CancelClose);
            }

        }
    }
}