Skip to content

Commit

Permalink
Use u8 as in the spec, add port docs
Browse files Browse the repository at this point in the history
  • Loading branch information
@hecatia-elegua
hecatia-elegua committed Feb 1, 2023
1 parent 485b0f9 commit 59118f7
Showing 1 changed file with 83 additions and 72 deletions.
155 changes: 83 additions & 72 deletions kernel/pci/src/lib.rs
View file
Original file line number Diff line number Diff line change
Expand Up @@ -19,56 +19,62 @@ use bit_field::BitField;

// The below constants define the PCI configuration space.
// More info here: <http://wiki.osdev.org/PCI#PCI_Device_Structure>
pub const PCI_VENDOR_ID: u16 = 0x0;
pub const PCI_DEVICE_ID: u16 = 0x2;
pub const PCI_COMMAND: u16 = 0x4;
pub const PCI_STATUS: u16 = 0x6;
pub const PCI_REVISION_ID: u16 = 0x8;
pub const PCI_PROG_IF: u16 = 0x9;
pub const PCI_SUBCLASS: u16 = 0xA;
pub const PCI_CLASS: u16 = 0xB;
pub const PCI_CACHE_LINE_SIZE: u16 = 0xC;
pub const PCI_LATENCY_TIMER: u16 = 0xD;
pub const PCI_HEADER_TYPE: u16 = 0xE;
pub const PCI_BIST: u16 = 0xF;
pub const PCI_BAR0: u16 = 0x10;
pub const PCI_BAR1: u16 = 0x14;
pub const PCI_BAR2: u16 = 0x18;
pub const PCI_BAR3: u16 = 0x1C;
pub const PCI_BAR4: u16 = 0x20;
pub const PCI_BAR5: u16 = 0x24;
pub const PCI_CARDBUS_CIS: u16 = 0x28;
pub const PCI_SUBSYSTEM_VENDOR_ID: u16 = 0x2C;
pub const PCI_SUBSYSTEM_ID: u16 = 0x2E;
pub const PCI_EXPANSION_ROM_BASE: u16 = 0x30;
pub const PCI_CAPABILITIES: u16 = 0x34;
pub const PCI_VENDOR_ID: u8 = 0x0;
pub const PCI_DEVICE_ID: u8 = 0x2;
pub const PCI_COMMAND: u8 = 0x4;
pub const PCI_STATUS: u8 = 0x6;
pub const PCI_REVISION_ID: u8 = 0x8;
pub const PCI_PROG_IF: u8 = 0x9;
pub const PCI_SUBCLASS: u8 = 0xA;
pub const PCI_CLASS: u8 = 0xB;
pub const PCI_CACHE_LINE_SIZE: u8 = 0xC;
pub const PCI_LATENCY_TIMER: u8 = 0xD;
pub const PCI_HEADER_TYPE: u8 = 0xE;
pub const PCI_BIST: u8 = 0xF;
pub const PCI_BAR0: u8 = 0x10;
pub const PCI_BAR1: u8 = 0x14;
pub const PCI_BAR2: u8 = 0x18;
pub const PCI_BAR3: u8 = 0x1C;
pub const PCI_BAR4: u8 = 0x20;
pub const PCI_BAR5: u8 = 0x24;
pub const PCI_CARDBUS_CIS: u8 = 0x28;
pub const PCI_SUBSYSTEM_VENDOR_ID: u8 = 0x2C;
pub const PCI_SUBSYSTEM_ID: u8 = 0x2E;
pub const PCI_EXPANSION_ROM_BASE: u8 = 0x30;
pub const PCI_CAPABILITIES: u8 = 0x34;
// 0x35 through 0x3B are reserved
pub const PCI_INTERRUPT_LINE: u16 = 0x3C;
pub const PCI_INTERRUPT_PIN: u16 = 0x3D;
pub const PCI_MIN_GRANT: u16 = 0x3E;
pub const PCI_MAX_LATENCY: u16 = 0x3F;
pub const PCI_INTERRUPT_LINE: u8 = 0x3C;
pub const PCI_INTERRUPT_PIN: u8 = 0x3D;
pub const PCI_MIN_GRANT: u8 = 0x3E;
pub const PCI_MAX_LATENCY: u8 = 0x3F;

// PCI Capability IDs
pub const MSI_CAPABILITY: u16 = 0x05;
pub const MSIX_CAPABILITY: u16 = 0x11;
pub const MSI_CAPABILITY: u8 = 0x05;
pub const MSIX_CAPABILITY: u8 = 0x11;

/// If a BAR's bits [2:1] equal this value, that BAR describes a 64-bit address.
/// If not, that BAR describes a 32-bit address.
const BAR_ADDRESS_IS_64_BIT: u32 = 2;

/// The maximum number of PCI buses.
const MAX_NUM_PCI_BUSES: u16 = 256;
/// The maximum number of PCI buses is 256.
const PCI_BUS_NUMBER_RANGE: core::ops::RangeInclusive<u8> = 0..=255;

/// The maximum number of PCI slots on one PCI bus.
const MAX_SLOTS_PER_BUS: u16 = 32;
const MAX_SLOTS_PER_BUS: u8 = 32;
/// The maximum number of PCI functions (individual devices) on one PCI slot.
const MAX_FUNCTIONS_PER_SLOT: u16 = 8;
const MAX_FUNCTIONS_PER_SLOT: u8 = 8;

/// Addresses/offsets into the PCI configuration space should clear the least-significant 2 bits.
const PCI_CONFIG_ADDRESS_OFFSET_MASK: u16 = 0xFC;
const PCI_CONFIG_ADDRESS_OFFSET_MASK: u8 = 0xFC;
const CONFIG_ADDRESS: u16 = 0xCF8;
const CONFIG_DATA: u16 = 0xCFC;

/// This port is used to specify an address in configuration space,
/// to then be read/written by the data port.
static PCI_CONFIG_ADDRESS_PORT: Mutex<Port<u32>> = Mutex::new(Port::new(CONFIG_ADDRESS));

/// This port is used to transfer data to or from the register chosen by the address port.
/// It will also generate the configuration access.
static PCI_CONFIG_DATA_PORT: Mutex<Port<u32>> = Mutex::new(Port::new(CONFIG_DATA));


Expand All @@ -83,7 +89,7 @@ pub fn get_pci_buses() -> &'static Vec<PciBus> {

/// Returns a reference to the `PciDevice` with the given bus, slot, func identifier.
/// If the PCI bus hasn't been initialized, this initializes the PCI bus & scans it to enumerates devices.
pub fn get_pci_device_bsf(bus: u16, slot: u16, func: u16) -> Option<&'static PciDevice> {
pub fn get_pci_device_bsf(bus: u8, slot: u8, func: u8) -> Option<&'static PciDevice> {
for b in get_pci_buses() {
if b.bus_number == bus {
for d in &b.devices {
Expand All @@ -108,7 +114,7 @@ pub fn pci_device_iter() -> impl Iterator<Item = &'static PciDevice> {
#[derive(Debug)]
pub struct PciBus {
/// The number identifier of this PCI bus.
pub bus_number: u16,
pub bus_number: u8,
/// The list of devices attached to this PCI bus.
pub devices: Vec<PciDevice>,
}
Expand All @@ -119,7 +125,7 @@ pub struct PciBus {
fn scan_pci() -> Vec<PciBus> {
let mut buses: Vec<PciBus> = Vec::new();

for bus in 0..MAX_NUM_PCI_BUSES {
for bus in PCI_BUS_NUMBER_RANGE {
let mut device_list: Vec<PciDevice> = Vec::new();

for slot in 0..MAX_SLOTS_PER_BUS {
Expand Down Expand Up @@ -192,21 +198,21 @@ fn scan_pci() -> Vec<PciBus> {
/// This offers methods for reading and writing the PCI config space.
#[derive(Copy, Clone, PartialEq, Eq, Hash)]
pub struct PciLocation {
bus: u16,
slot: u16,
func: u16,
bus: u8,
slot: u8,
func: u8,
}

impl PciLocation {
pub fn bus(&self) -> u16 { self.bus }
pub fn slot(&self) -> u16 { self.slot }
pub fn function(&self) -> u16 { self.func }
pub fn bus(&self) -> u8 { self.bus }
pub fn slot(&self) -> u8 { self.slot }
pub fn function(&self) -> u8 { self.func }


/// Computes a PCI address from bus, slot, func, and offset.
/// The least two significant bits of offset are masked, so it's 4-byte aligned addressing,
/// which makes sense since we read PCI data (from the configuration space) in 32-bit chunks.
fn pci_address(self, offset: u16) -> u32 {
fn pci_address(self, offset: u8) -> u32 {
((self.bus as u32) << 16) |
((self.slot as u32) << 11) |
((self.func as u32) << 8) |
Expand All @@ -215,44 +221,52 @@ impl PciLocation {
}

/// read 32-bit data at the specified `offset` from the PCI device specified by the given `bus`, `slot`, `func` set.
pub fn pci_read_32(&self, offset: u16) -> u32 {
pub fn pci_read_32(&self, offset: u8) -> u32 {
unsafe {
PCI_CONFIG_ADDRESS_PORT.lock().write(self.pci_address(offset));
}
PCI_CONFIG_DATA_PORT.lock().read() >> ((offset & (!PCI_CONFIG_ADDRESS_OFFSET_MASK)) * 8)
Self::data_port_read() >> ((offset & (!PCI_CONFIG_ADDRESS_OFFSET_MASK)) * 8)
}

/// Read 16-bit data at the specified `offset` from this PCI device.
pub fn pci_read_16(&self, offset: u16) -> u16 {
pub fn pci_read_16(&self, offset: u8) -> u16 {
self.pci_read_32(offset) as u16
}

/// Read 8-bit data at the specified `offset` from the PCI device.
pub fn pci_read_8(&self, offset: u16) -> u8 {
pub fn pci_read_8(&self, offset: u8) -> u8 {
self.pci_read_32(offset) as u8
}

/// Write 32-bit data to the specified `offset` for the PCI device.
pub fn pci_write(&self, offset: u16, value: u32) {
pub fn pci_write(&self, offset: u8, value: u32) {
unsafe {
PCI_CONFIG_ADDRESS_PORT.lock().write(self.pci_address(offset));
PCI_CONFIG_DATA_PORT.lock().write((value) << ((offset & 2) * 8));
Self::data_port_write((value) << ((offset & 2) * 8));
}
}

fn data_port_write(value: u32) {
unsafe {
PCI_CONFIG_DATA_PORT.lock().write(value);
}
}

fn data_port_read() -> u32 {
PCI_CONFIG_DATA_PORT.lock().read()
}

/// Sets the PCI device's bit 3 in the command portion, which is apparently needed to activate DMA (??)
pub fn pci_set_command_bus_master_bit(&self) {
unsafe {
PCI_CONFIG_ADDRESS_PORT.lock().write(self.pci_address(PCI_COMMAND));
}
let inval = PCI_CONFIG_DATA_PORT.lock().read();
let inval = Self::data_port_read();
trace!("pci_set_command_bus_master_bit: PciDevice: {}, read value: {:#x}", self, inval);
unsafe {
PCI_CONFIG_DATA_PORT.lock().write(inval | (1 << 2));
}
Self::data_port_write(inval | (1 << 2));
trace!("pci_set_command_bus_master_bit: PciDevice: {}, read value AFTER WRITE CMD: {:#x}",
self,
PCI_CONFIG_DATA_PORT.lock().read()
Self::data_port_read()
);
}

Expand All @@ -261,23 +275,20 @@ impl PciLocation {
unsafe {
PCI_CONFIG_ADDRESS_PORT.lock().write(self.pci_address(PCI_COMMAND));
}
let command = PCI_CONFIG_DATA_PORT.lock().read();
let command = Self::data_port_read();
trace!("pci_set_interrupt_disable_bit: PciDevice: {}, read value: {:#x}", self, command);

const INTERRUPT_DISABLE: u32 = 1 << 10;
unsafe {
PCI_CONFIG_DATA_PORT.lock().write(command | INTERRUPT_DISABLE);
}
Self::data_port_write(command | INTERRUPT_DISABLE);
trace!("pci_set_interrupt_disable_bit: PciDevice: {} read value AFTER WRITE CMD: {:#x}",
self, PCI_CONFIG_DATA_PORT.lock().read());
self, Self::data_port_read());
}

/// Explores the PCI config space and returns address of requested capability, if present.
/// PCI capabilities are stored as a linked list in the PCI config space,
/// with each capability storing the pointer to the next capability right after its ID.
/// The function returns a None value if capabilities are not valid for this device
/// or if the requested capability is not present.
pub fn find_pci_capability(&self, pci_capability: u16) -> Option<u16> {
pub fn find_pci_capability(&self, pci_capability: u8) -> Option<u8> {
let status = self.pci_read_16(PCI_STATUS);

// capabilities are only valid if bit 4 of status register is set
Expand All @@ -289,7 +300,7 @@ impl PciLocation {
// debug!("capabilities pointer: {:#X}", capabilities);

// mask the bottom 2 bits of the capabilities pointer to find the address of the first capability
let mut cap_addr = capabilities as u16 & 0xFFFC;
let mut cap_addr = capabilities & 0xFC;

// the last capability will have its next pointer equal to zero
let final_capability = 0;
Expand All @@ -300,15 +311,15 @@ impl PciLocation {
let cap_header = self.pci_read_16(cap_addr);

// the id is the lower byte of the header
let cap_id = cap_header & 0xFF;
let cap_id = (cap_header & 0xFF) as u8;

if cap_id == pci_capability {
debug!("Found capability: {:#X} at {:#X}", pci_capability, cap_addr);
return Some(cap_addr);
debug!("Found capability: {:#X} at {:#X}", pci_capability, cap_addr);
return Some(cap_addr);
}

// find address of next capability which is the higher byte of the header
cap_addr = (cap_header >> 8) & 0xFF;
cap_addr = ((cap_header >> 8) & 0xFF) as u8;
}
}
None
Expand Down Expand Up @@ -415,7 +426,7 @@ impl PciDevice {
// (4) Bitwise "not" (negate) that value, then add 1.
// The resulting value is the size of that BAR's memory region.
// (5) Restore the original value to that BAR
let bar_offset = PCI_BAR0 + (bar_index as u16 * 0x4);
let bar_offset = PCI_BAR0 + (bar_index as u8 * 4);
let original_value = self.bars[bar_index];

self.pci_write(bar_offset, 0xFFFF_FFFF); // Step 1
Expand All @@ -441,7 +452,7 @@ impl PciDevice {
let cap_addr = self.find_pci_capability(MSI_CAPABILITY).ok_or("Device not MSI capable")?;

// offset in the capability space where the message address register is located
const MESSAGE_ADDRESS_REGISTER_OFFSET: u16 = 4;
const MESSAGE_ADDRESS_REGISTER_OFFSET: u8 = 4;
// the memory region is a constant defined for Intel cpus where MSI messages are written
// it should be written to bit 20 of the message address register
const MEMORY_REGION: u32 = 0x0FEE << 20;
Expand All @@ -452,12 +463,12 @@ impl PciDevice {
self.pci_write(cap_addr + MESSAGE_ADDRESS_REGISTER_OFFSET, MEMORY_REGION| core);

// offset in the capability space where the message data register is located
const MESSAGE_DATA_REGISTER_OFFSET: u16 = 12;
const MESSAGE_DATA_REGISTER_OFFSET: u8 = 12;
// Set the interrupt number for the MSI in the Message Data Register
self.pci_write(cap_addr + MESSAGE_DATA_REGISTER_OFFSET, int_num as u32);

// offset in the capability space where the message control register is located
const MESSAGE_CONTROL_REGISTER_OFFSET: u16 = 2;
const MESSAGE_CONTROL_REGISTER_OFFSET: u8 = 2;
// to enable the MSI capability, we need to set it bit 0 of the message control register
const MSI_ENABLE: u32 = 1;
let ctrl = self.pci_read_16(cap_addr + MESSAGE_CONTROL_REGISTER_OFFSET) as u32;
Expand All @@ -476,7 +487,7 @@ impl PciDevice {
let cap_addr = self.find_pci_capability(MSIX_CAPABILITY).ok_or("Device not MSI-X capable")?;

// offset in the capability space where the message control register is located
const MESSAGE_CONTROL_REGISTER_OFFSET: u16 = 2;
const MESSAGE_CONTROL_REGISTER_OFFSET: u8 = 2;
let ctrl = self.pci_read_16(cap_addr + MESSAGE_CONTROL_REGISTER_OFFSET) as u32;

// write to bit 15 of Message Control Register to enable MSI-X
Expand Down

0 comments on commit 59118f7

Please sign in to comment.