Skip to content

Latest commit

 

History

History
19 lines (11 loc) · 592 Bytes

README.md

File metadata and controls

19 lines (11 loc) · 592 Bytes
Raw

MicroPython with or without WebThing support

These steps are for flashing a board with MicroPython and not for WebThing support

  • make.flash esp32 board with uPython
  • make falsh.erase the board
  • make repl start repl, uses picocom
  • make build will build a board with uPython

using with project

-Requirements, ESP32 board

-Serial port to connect to board

steps

All that is needed once the serial port is connected is to replace the PORT, (/dev/cu.usbserial-01DFA28F) with the name of the connected serial port. This can be found using ls /dev/cu* on the MacOS.