UGS se desconecta #2605

MarquinaLuz · 2024-09-09T03:20:41Z

MarquinaLuz
Sep 9, 2024

Conectó mi CNC a UGS y a los pocos segundos se desconecta y dice que desconoce el dispositivo. Él programa se congela y mi máquina sigue girando el spindle en el punto donde quedó, tengo que apagarla y al hacerlo el spindle pará pero al final como si quisiera volver a encender gira un par de vueltas más.
Ya cambié el cable USB y sigue la falla.
Qué puedo hacer?!
Ayuda!!!

breiler · 2024-09-09T04:15:23Z

breiler
Sep 9, 2024
Collaborator

Your version of UGS is ancient, you should consider upgrading.

Can you post your log file from c:/users/yoltzli/.ugsplatform/2.0.12/dev/var/log/messages.log

What controller hardware are you using?

3 replies

MarquinaLuz Sep 14, 2024
Author

Adjunto lo que me aparece

Y mi controlador es GRBL ESP32

breiler Sep 15, 2024
Collaborator

I need the actual log file. A camera picture of the first page of the file isn't useful.

MarquinaLuz Sep 17, 2024
Author

*** Connecting to jserialcomm://COM3:115200
x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[MSG:Grbl_ESP32 Ver 1.3a Date 20211103]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:ESP32_V4]
[MSG:Axis count 3]
[MSG:RMT Steps]
[MSG:Init Motors]
[MSG:Global stepper disable pin:GPIO(22)]
[MSG:X Axis Standard Stepper Step:GPIO(27) Dir:GPIO(14) Disable:None Limits(-6000.000,0.000)]
[MSG:Y Axis Standard Stepper Step:GPIO(25) Dir:GPIO(26) Disable:None Limits(-6000.000,0.000)]
[MSG:Z Axis Standard Stepper Step:GPIO(32) Dir:GPIO(33) Disable:None Limits(-6000.000,0.000)]
[MSG:PWM spindle Output:GPIO(4), Enbl:GPIO(2), Dir:GPIO(15), Freq:5000Hz, Res:13bits]
[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]
[MSG:X Axis limit switch on pin GPIO(16)]
[MSG:Y Axis limit switch on pin GPIO(17)]
[MSG:Z Axis limit switch on pin GPIO(21)]
[MSG:Probe on pin GPIO(36)]
Grbl 1.3a ['$' for help]
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:0.000,0.000,0.000>
*** Fetching device status

?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>
ok
$I
[VER:1.3a.20211103:]
[OPT:PHBSW]
[MSG:Using machine:ESP32_V4]
[MSG:Mode=STA:SSID=:Status=Not connected:IP=0.0.0.0:MAC=78-21-84-7C-7A-A8]
[MSG:Mode=AP:SSDI=GRBL_ESP:IP=192.168.0.1:MAC=78-21-84-7C-7A-A9]
[MSG:No BT]
ok
$$
$0 = 10 (Step pulse time, microseconds)
$1 = 250 (Step idle delay, milliseconds)
$2 = 0 (Step pulse invert, mask)
$3 = 1 (Step direction invert, mask)
$4 = 0 (Invert step enable pin, boolean)
$5 = 1 (Invert limit pins, boolean)
$6 = 0 (Invert probe pin, boolean)
$10 = 1 (Status report options, mask)
$11 = 0.010 (Junction deviation, millimeters)
$12 = 0.002 (Arc tolerance, millimeters)
$13 = 0 (Report in inches, boolean)
$20 = 0 (Soft limits enable, boolean)
$21 = 0 (Hard limits enable, boolean)
$22 = 0 (Homing cycle enable, boolean)
$23 = 0 (Homing direction invert, mask)
$24 = 2000.000 (Homing locate feed rate, mm/min)
$25 = 2000.000 (Homing search seek rate, mm/min)
$26 = 250.000 (Homing switch debounce delay, milliseconds)
$27 = 1.000 (Homing switch pull-off distance, millimeters)
$30 = 24000.000 (Maximum spindle speed, RPM)
$31 = 0.000 (Minimum spindle speed, RPM)
$32 = 0 (Laser-mode enable, boolean)
$100 = 10.681 (X-axis travel resolution, step/mm)
$101 = 9.980 (Y-axis travel resolution, step/mm)
$102 = 200.400 (Z-axis travel resolution, step/mm)
$103 = 100.000
$104 = 100.000
$105 = 100.000
$110 = 2500.000 (X-axis maximum rate, mm/min)
$111 = 2500.000 (Y-axis maximum rate, mm/min)
$112 = 600.000 (Z-axis maximum rate, mm/min)
$113 = 1000.000
$114 = 1000.000
$115 = 1000.000
$120 = 2500.000 (X-axis acceleration, mm/sec^2)
$121 = 2500.000 (Y-axis acceleration, mm/sec^2)
$122 = 1000.000 (Z-axis acceleration, mm/sec^2)
$123 = 200.000
$124 = 200.000
$125 = 200.000
$130 = 6000.000 (X-axis maximum travel, millimeters)
$131 = 6000.000 (Y-axis maximum travel, millimeters)
$132 = 6000.000 (Z-axis maximum travel, millimeters)
$133 = 300.000
$134 = 300.000
$135 = 300.000
ok
$G
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0]
ok
*** Connected to GRBL 1.3a
**** Connection closed ****
*** Connecting to jserialcomm://COM3:115200
x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[MSG:Grbl_ESP32 Ver 1.3a Date 20211103]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:ESP32_V4]
[MSG:Axis count 3]
[MSG:RMT Steps]
[MSG:Init Motors]
[MSG:Global stepper disable pin:GPIO(22)]
[MSG:X Axis Standard Stepper Step:GPIO(27) Dir:GPIO(14) Disable:None Limits(-6000.000,0.000)]
[MSG:Y Axis Standard Stepper Step:GPIO(25) Dir:GPIO(26) Disable:None Limits(-6000.000,0.000)]
[MSG:Z Axis Standard Stepper Step:GPIO(32) Dir:GPIO(33) Disable:None Limits(-6000.000,0.000)]
[MSG:PWM spindle Output:GPIO(4), Enbl:GPIO(2), Dir:GPIO(15), Freq:5000Hz, Res:13bits]
[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]
[MSG:X Axis limit switch on pin GPIO(16)]
[MSG:Y Axis limit switch on pin GPIO(17)]
[MSG:Z Axis limit switch on pin GPIO(21)]
[MSG:Probe on pin GPIO(36)]
Grbl 1.3a ['$' for help]
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:0.000,0.000,0.000>
*** Fetching device status
?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>
ok
$I
[VER:1.3a.20211103:]
[OPT:PHBSW]
[MSG:Using machine:ESP32_V4]
[MSG:Mode=STA:SSID=:Status=Not connected:IP=0.0.0.0:MAC=78-21-84-7C-7A-A8]
[MSG:Mode=AP:SSDI=GRBL_ESP:IP=192.168.0.1:MAC=78-21-84-7C-7A-A9]
[MSG:No BT]
ok
$$
$0 = 10 (Step pulse time, microseconds)
$1 = 250 (Step idle delay, milliseconds)
$2 = 0 (Step pulse invert, mask)
$3 = 1 (Step direction invert, mask)
$4 = 0 (Invert step enable pin, boolean)
$5 = 1 (Invert limit pins, boolean)
$6 = 0 (Invert probe pin, boolean)
$10 = 1 (Status report options, mask)
$11 = 0.010 (Junction deviation, millimeters)
$12 = 0.002 (Arc tolerance, millimeters)
$13 = 0 (Report in inches, boolean)
$20 = 0 (Soft limits enable, boolean)
$21 = 0 (Hard limits enable, boolean)
$22 = 0 (Homing cycle enable, boolean)
$23 = 0 (Homing direction invert, mask)
$24 = 2000.000 (Homing locate feed rate, mm/min)
$25 = 2000.000 (Homing search seek rate, mm/min)
$26 = 250.000 (Homing switch debounce delay, milliseconds)
$27 = 1.000 (Homing switch pull-off distance, millimeters)
$30 = 24000.000 (Maximum spindle speed, RPM)
$31 = 0.000 (Minimum spindle speed, RPM)
$32 = 0 (Laser-mode enable, boolean)
$100 = 10.681 (X-axis travel resolution, step/mm)
$101 = 9.980 (Y-axis travel resolution, step/mm)
$102 = 200.400 (Z-axis travel resolution, step/mm)
$103 = 100.000
$104 = 100.000
$105 = 100.000
$110 = 2500.000 (X-axis maximum rate, mm/min)
$111 = 2500.000 (Y-axis maximum rate, mm/min)
$112 = 600.000 (Z-axis maximum rate, mm/min)
$113 = 1000.000
$114 = 1000.000
$115 = 1000.000
$120 = 2500.000 (X-axis acceleration, mm/sec^2)
$121 = 2500.000 (Y-axis acceleration, mm/sec^2)
$122 = 1000.000 (Z-axis acceleration, mm/sec^2)
$123 = 200.000
$124 = 200.000
$125 = 200.000
$130 = 6000.000 (X-axis maximum travel, millimeters)
$131 = 6000.000 (Y-axis maximum travel, millimeters)
$132 = 6000.000 (Z-axis maximum travel, millimeters)
$133 = 300.000
$134 = 300.000
$135 = 300.000
ok
$G
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0]
ok
*** Connected to GRBL 1.3a
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91X-50F1000
ok
$J=G21G91X-50F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
G10 P0 L20 X0
ok
G10 P0 L20 Y0
ok
G10 P0 L20 Z0
ok
**** Connection closed ****
*** Connecting to jserialcomm://COM3:115200
x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[MSG:Grbl_ESP32 Ver 1.3a Date 20211103]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:ESP32_V4]
[MSG:Axis count 3]
[MSG:RMT Steps]
[MSG:Init Motors]
[MSG:Global stepper disable pin:GPIO(22)]
[MSG:X Axis Standard Stepper Step:GPIO(27) Dir:GPIO(14) Disable:None Limits(-6000.000,0.000)]
[MSG:Y Axis Standard Stepper Step:GPIO(25) Dir:GPIO(26) Disable:None Limits(-6000.000,0.000)]
[MSG:Z Axis Standard Stepper Step:GPIO(32) Dir:GPIO(33) Disable:None Limits(-6000.000,0.000)]
[MSG:PWM spindle Output:GPIO(4), Enbl:GPIO(2), Dir:GPIO(15), Freq:5000Hz, Res:13bits]
[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]
[MSG:X Axis limit switch on pin GPIO(16)]
[MSG:Y Axis limit switch on pin GPIO(17)]
[MSG:Z Axis limit switch on pin GPIO(21)]
[MSG:Probe on pin GPIO(36)]
Grbl 1.3a ['$' for help]
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:-100.000,-350.000,-8.000>
*** Fetching device status
?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>
ok
$I
[VER:1.3a.20211103:]
[OPT:PHBSW]
[MSG:Using machine:ESP32_V4]
[MSG:Mode=STA:SSID=:Status=Not connected:IP=0.0.0.0:MAC=78-21-84-7C-7A-A8]
[MSG:Mode=AP:SSDI=GRBL_ESP:IP=192.168.0.1:MAC=78-21-84-7C-7A-A9]
[MSG:No BT]
ok
$$
$0 = 10 (Step pulse time, microseconds)
$1 = 250 (Step idle delay, milliseconds)
$2 = 0 (Step pulse invert, mask)
$3 = 1 (Step direction invert, mask)
$4 = 0 (Invert step enable pin, boolean)
$5 = 1 (Invert limit pins, boolean)
$6 = 0 (Invert probe pin, boolean)
$10 = 1 (Status report options, mask)
$11 = 0.010 (Junction deviation, millimeters)
$12 = 0.002 (Arc tolerance, millimeters)
$13 = 0 (Report in inches, boolean)
$20 = 0 (Soft limits enable, boolean)
$21 = 0 (Hard limits enable, boolean)
$22 = 0 (Homing cycle enable, boolean)
$23 = 0 (Homing direction invert, mask)
$24 = 2000.000 (Homing locate feed rate, mm/min)
$25 = 2000.000 (Homing search seek rate, mm/min)
$26 = 250.000 (Homing switch debounce delay, milliseconds)
$27 = 1.000 (Homing switch pull-off distance, millimeters)
$30 = 24000.000 (Maximum spindle speed, RPM)
$31 = 0.000 (Minimum spindle speed, RPM)
$32 = 0 (Laser-mode enable, boolean)
$100 = 10.681 (X-axis travel resolution, step/mm)
$101 = 9.980 (Y-axis travel resolution, step/mm)
$102 = 200.400 (Z-axis travel resolution, step/mm)
$103 = 100.000
$104 = 100.000
$105 = 100.000
$110 = 2500.000 (X-axis maximum rate, mm/min)
$111 = 2500.000 (Y-axis maximum rate, mm/min)
$112 = 600.000 (Z-axis maximum rate, mm/min)
$113 = 1000.000
$114 = 1000.000
$115 = 1000.000
$120 = 2500.000 (X-axis acceleration, mm/sec^2)
$121 = 2500.000 (Y-axis acceleration, mm/sec^2)
$122 = 1000.000 (Z-axis acceleration, mm/sec^2)
$123 = 200.000
$124 = 200.000
$125 = 200.000
$130 = 6000.000 (X-axis maximum travel, millimeters)
$131 = 6000.000 (Y-axis maximum travel, millimeters)
$132 = 6000.000 (Z-axis maximum travel, millimeters)
$133 = 300.000
$134 = 300.000
$135 = 300.000
ok
$G
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0]
ok
*** Connected to GRBL 1.3a
G10 P0 L20 X0
ok
G10 P0 L20 Y0
ok
G10 P0 L20 Z0
ok

G90
G21
G49
G0Z2.0000
M3S9000
G4P2.50
G0X2.9570Y32.8781Z2.0000
G1Z-0.0300F70
G1X2.0599Y31.5322F120
X1.6588Y30.8590
ok
ok
ok
ok
G3X1.3189Y30.1559I4.5279J-2.6222
ok
ok
ok
G3X0.3461Y25.6075I15.3613J-5.6637
ok
ok
G3X0.7859Y20.4048I19.3746J-0.9823
ok
ok
G3X2.3458Y16.2366I16.3870J3.7566
ok
G3X4.9544Y12.3278I22.2112J11.9980
G1X6.6072Y10.4084
ok
Run|MPos:2.996,32.866,1.118|FS:70,9000|Ov:100,100,100|A:S>
X2.5910Y8.4257
X6.7724Y7.9806
ok
X6.1955Y5.1083
X9.9671Y5.4718
X10.5637Y1.8574
ok
X13.9060Y3.7468
X15.0228Y1.9596
ok
X14.9830Y0.6807
ok
X18.1329Y0.4670
ok
ok
G3X20.3718Y0.4631I1.1606J23.3350
ok
ok
G1X23.9648Y0.6828
ok
X23.2870Y2.9765
ok
X25.0058Y4.2437
ok
X27.0998Y3.4131
ok
X28.8918Y6.5103
ok
X32.3595Y5.4064
X32.3382Y9.3358
ok
X37.3866Y10.0494
ok
X32.1687Y11.8298
ok
X33.7175Y13.2091
ok
ok
G3X35.5614Y15.2585I-16.2791J16.5004
ok
ok
G3X36.4735Y16.5163I-11.2931J9.1493
ok
ok
G3X37.8963Y19.3737I-13.3271J8.4190
ok
ok
G3X38.5992Y22.7701I-10.1517J3.8718
ok
G3X38.5547Y24.6511I-13.6900J0.6168
G1X38.4813Y25.1228
ok
X38.1079Y26.5199
X37.9193Y25.2745
ok
G2X37.5491Y23.7209I-20.5094J4.0663
ok
G2X37.1467Y22.6163I-7.0715J1.9503
ok
ok
G2X33.6861Y18.3861I-10.2400J4.8465
ok
ok
G2X30.5063Y16.4520I-9.5098J12.0539
ok
G2X29.2608Y16.0710I-2.3515J5.4605
G1X28.6218Y16.0208
ok
X28.7087Y17.0046
ok
G3X28.6499Y17.9825I-5.5712J0.1558
ok
G3X28.1906Y19.0827I-2.1124J-0.2359
G1X27.6894Y19.6460
ok
ok
G3X27.2281Y19.9739I-1.4614J-1.5673
ok
G1X27.2227Y21.9833
ok
G3X28.6091Y22.9412I-0.3032J1.9210
G1X28.6463Y23.0447
ok
X28.2331Y30.1619
ok
X29.3808Y30.0938
X29.7616Y30.0922
ok
ok
G3X31.2811Y30.2486I-1.3748J20.8167
G1X27.4890Y47.2832
ok
X28.0443Y49.1380
ok
ok
G3X28.3373Y50.5949I-14.0842J3.5898
ok
ok
G3X28.9006Y56.5339I-49.3125J7.6736
ok
G3X28.9593Y59.1273I-64.9138J2.7659
ok
ok
G3X28.7193Y66.9493I-148.8864J-0.6541
ok
G3X28.3037Y73.5682I-226.6040J-10.9032
ok
G3X27.6494Y80.1667I-151.6131J-11.7021
ok
G3X26.4876Y87.6669I-123.4071J-15.2764
ok
G3X25.1484Y94.2462I-264.5877J-50.4321
ok
G3X23.3260Y101.0071I-58.8784J-12.2446
ok
G3X22.0704Y104.1952I-28.9900J-9.5759
ok
G3X21.0846Y105.9848I-13.6521J-6.3534
ok
G3X20.0023Y107.5954I-26.3715J-16.5527
ok
G3X18.7234Y109.0489I-7.5128J-5.3209
ok
G3X17.9687Y109.6158I-3.5331J-3.9177
ok
G3X14.6555Y110.4315I-3.0112J-5.0948
ok
G3X11.9121Y109.4182I0.2221J-4.8218
ok
G3X10.3463Y107.6584I3.3916J-4.5943
ok
G3X9.7478Y105.6041I5.5083J-2.7190
ok
G3X9.6471Y104.3884I9.2953J-1.3824
ok
G3X9.7379Y103.2843I7.1312J0.0312
G1X10.0144Y101.8275
ok
G3X10.3871Y100.3919I15.5672J3.2758
ok
G1X10.8311Y98.9744
ok
G2X12.2589Y94.4835I-82.3801J-28.6637
ok
G1X11.3702Y91.6732
ok
G3X9.5345Y84.2518I127.2073J-35.4039
ok
G1X8.4066Y78.9152
ok
G3X7.6776Y74.4278I53.7370J-11.0323
ok
G3X7.1394Y64.3367I66.8690J-8.6265
ok
G3X7.7355Y52.8732I160.2447J2.5867
ok
G1X8.7283Y43.1893
ok
X8.8993Y41.2684
X9.3788Y35.0289
ok
X10.6572Y16.2038
X9.6566Y16.5419
ok
G2X8.6516Y17.1637I2.0728J4.4733
ok
ok
G2X6.2226Y19.5695I9.6725J12.1951
ok
ok
G2X4.7014Y21.7851I12.1722J9.9873
ok
ok
G2X3.4568Y24.3605I17.3769J9.9860
ok
G2X2.7236Y27.0218I11.4965J4.5989
ok
G2X2.5505Y30.2094I17.1125J2.5279
ok
G2X2.7137Y31.5474I9.0021J-0.4187
G1X2.9570Y32.8781
G0Z2.0000
ok
G0X6.6072Y10.4084
G1Z-0.0800F70
ok
ok
G2X8.6374Y11.2398I11.9785J-26.3554F100
ok
G2X8.2641Y11.8948I1.5294J1.3058
ok
ok
G2X8.2674Y12.2887I0.6197J0.1916
ok
ok
G2X8.5710Y12.4577I0.2324J-0.0602
ok
G2X9.1749Y12.0869I-0.2349J-1.0597
ok
G2X9.6034Y11.4109I-1.5499J-1.4565
G0Z2.0000
ok
G0X10.5154Y11.9488
G1Z-0.0800F70
ok
G1X10.5420Y12.4718F100
X10.6150Y12.7957
ok
G2X11.1971Y14.1834I8.9153J-2.9238
G0Z2.0000
ok
ok
G0X10.7676Y14.5480
ok
G1Z-0.0800F70
ok
ok
G3X11.6274Y15.4130I-11.2053J11.9982F100
ok
G3X12.2570Y16.5923I-2.7913J2.2480
ok
ok
G3X12.6069Y19.3781I-7.0025J2.2942
ok
ok
G3X12.3238Y20.5103I-3.3317J-0.2315
G1X12.0554Y21.0067
ok
G3X11.0550Y22.4306I-22.6033J-14.8171
ok
G2X10.6367Y23.1635I3.9056J2.7151
ok
G2X10.3917Y24.4014I2.4774J1.1336
ok
ok
G2X10.6234Y25.7325I4.8013J-0.1500
ok
G2X10.9471Y26.6110I9.2172J-2.8972
G1X11.7278Y28.3623
ok
G3X12.2823Y30.1289I-6.8590J3.1231
ok
G3X12.1644Y31.8570I-3.7116J0.6149
ok
G3X11.8505Y32.6529I-5.3331J-1.6435
ok
G1X11.4321Y33.4257
ok
X10.4842Y34.9477
X10.0560Y35.7196
ok
G2X9.5444Y37.3424I4.2530J2.2329
ok
G2X9.5603Y38.6106I5.6772J0.5630
ok
ok
G2X9.8071Y39.8802I9.4076J-1.1703
ok
ok
G2X10.7202Y42.8042I61.2451J-17.5197
ok
G2X11.2293Y44.0940I17.0871J-5.9992
G1X11.9935Y45.7761
ok
G2X13.0476Y47.7053I26.0774J-12.9962
ok
G3X13.5670Y48.9034I-5.9034J3.2711
ok
G3X14.0213Y51.5191I-10.0722J3.0965
ok
ok
G3X14.0158Y52.3987I-8.9285J0.3844
ok
G3X13.7639Y54.3415I-14.4442J-0.8853
ok
G3X13.2976Y56.2684I-23.7437J-4.7259
G1X12.0103Y60.4464
ok
X11.2892Y62.3641
X11.0570Y63.1421
ok
G2X10.4758Y68.4201I23.1307J5.2181
ok
G2X10.8953Y71.3706I10.3016J0.0407
ok
G1X11.6891Y74.0187
ok
ok
G2X12.6815Y76.9141I76.2541J-24.5174
ok
G3X13.0954Y78.3228I-20.1843J6.6970
ok
G3X13.6741Y80.8392I-37.8119J10.0202
ok
ok
G3X14.2077Y85.9411I-30.5524J5.7745
G1X14.2113Y87.6427
ok
G3X13.8250Y91.2098I-19.7478J-0.3340
ok
G3X12.5758Y96.4266I-58.7761J-11.3164
ok
ok
G2X10.6410Y102.8719I116.0271J38.3438
ok
G2X10.5733Y105.2318I4.6069J1.3131
ok
G2X11.4328Y107.0933I4.2106J-0.8149
ok
G2X12.6710Y108.1718I3.5507J-2.8264
ok
G2X13.8272Y108.6347I2.3018J-4.0741
ok
G2X14.8224Y108.8001I1.4495J-5.6467
ok
G2X16.3954Y108.6072I0.2857J-4.1801
ok
G2X18.3019Y107.6888I-1.8050J-6.1855
ok
G2X19.1784Y106.8037I-2.3539J-3.2074
ok
G2X20.5624Y104.5162I-11.8282J-8.7190
ok
G2X21.4307Y102.5561I-16.5620J-8.5092
ok
G1X21.6372Y101.9359
X22.8937Y97.3403
X23.7178Y94.0828
ok
G2X24.2308Y91.6346I-46.7936J-11.0816
ok
G1X24.9430Y87.5120
X25.1467Y86.4500
ok
ok
G2X25.1712Y85.8282I-2.9150J-0.4261
ok
ok
G2X25.0501Y85.0333I-4.8917J0.3386
ok
G2X24.4866Y83.1235I-16.6738J3.8820
ok
ok
G2X23.3424Y80.1125I-75.9166J27.1238
G1X21.8909Y76.7126
ok
X20.0509Y76.7026
X19.9398Y64.1415
ok
X23.3861Y64.1135
X22.6809Y70.5029
ok
X21.8920Y76.7126
G0Z2.0000
ok
G0X22.7194Y76.3195
G1Z-0.0800F70
ok
ok
G1X21.9516Y76.2900F100
G0Z2.0000
ok
ok
G0X20.0500Y76.6909
G1Z-0.0800F70
ok
ok
G1X19.8683Y76.9079F100
ok
X19.8271Y76.9899
ok
ok
G2X19.7069Y77.9711I2.6705J0.8253
ok
G1X19.7992Y79.3305
ok
X19.7931Y79.6640
ok
ok
G3X19.6511Y81.2568I-15.3279J-0.5641
ok
ok
G3X18.7586Y83.4747I-5.1218J-0.7725
ok
G3X17.4449Y84.9451I-7.3216J-5.2192
ok
ok
G3X17.0184Y84.4995I0.1457J-0.5663
G0Z2.0000
ok
G0X16.5886Y83.9737
G1Z-0.0800F70
ok
G1X16.6224Y84.2078F100
ok
G2X16.9852Y84.5341I0.4704J-0.1581
G1X17.6342Y83.8313
ok
ok
G2X18.4099Y82.6455I-5.1946J-4.2447
ok
ok
G2X19.0786Y81.0557I-6.7632J-3.7807
ok
G0Z2.0000
G0X18.5197Y80.6160
ok
G1Z-0.0800F70
ok
G1X18.1847Y81.5410F100
ok
G3X17.1512Y83.3135I-7.5017J-3.1866
ok
G3X16.5207Y84.0357I-3.8941J-2.7633
ok
G1X16.3552Y83.8945
ok
ok
X16.2999Y83.7236
X16.2825Y83.4387
ok
G3X16.4909Y83.0220I0.7652J0.1223
ok
G0Z2.0000
G0X13.9724Y82.6224
ok
G1Z-0.0800F70
ok
G1X15.2250Y84.0321F100
ok
ok
G2X15.8832Y84.6560I4.4716J-4.0587
G1X16.0766Y84.4543
ok
ok
G2X16.2301Y83.9458I-0.5800J-0.4525
ok
ok
G1X16.1738Y83.7947
G0Z2.0000
ok
G0X13.7382Y81.2450
G1Z-0.0800F70
ok
G1X14.7214Y82.5994F100
ok
X15.3844Y83.4290
X15.7320Y83.7975
ok
X15.9222Y83.9467
ok
ok
G2X16.1451Y83.1800I-0.1571J-0.4614
ok
G0Z2.0000
ok
G0X18.0584Y80.3640
ok
G1Z-0.0800F70
ok
G1X17.7521Y81.1536F100
ok
ok
G3X16.6845Y82.8359I-6.9621J-3.2383
G1X16.4896Y83.0247
ok
X16.3462Y82.8343
ok
X16.3145Y82.7637
ok
ok
G3X16.3814Y82.1064I0.9436J-0.2361
ok
G3X17.0517Y81.0751I9.9428J5.7292
ok
G1X17.1668Y80.8738
ok
ok
G2X17.4941Y80.0354I-4.2739J-2.1513
ok
G2X17.6296Y79.0082I-3.6796J-1.0081
ok
G2X17.5264Y76.7359I-19.7603J-0.2409
ok
ok
G3X17.5810Y75.4388I6.3812J-0.3813
ok
G3X17.8704Y74.6893I1.9762J0.3325
ok
G3X18.3434Y74.2478I1.2790J0.8960
G1X18.7634Y74.0292
ok
X18.9586Y73.9611
ok
G3X20.0042Y73.8098I1.2877J5.2121
G0Z2.0000
ok
G0X20.0021Y72.7650
G1Z-0.0800F70
ok
G1X19.5773Y71.9513F100
ok
ok
G3X19.1213Y70.5207I8.1695J-3.3922
G1X18.8603Y69.3385
ok
ok
G3X18.2740Y65.7336I106.4382J-19.1622
ok
ok
G3X17.8663Y60.7057I39.1646J-5.7059
ok
G3X18.3370Y57.3379I11.9155J-0.0513
ok
ok
G3X18.9806Y56.0773I4.1991J1.3493
G1X19.2270Y55.8102
ok
G3X19.5184Y55.6097I0.9029J0.9999
ok
G3X20.6386Y55.4296I0.8581J1.7643
ok
G3X21.4110Y55.8572I-0.0909J1.0757
ok
G1X21.9742Y56.6835
ok
G3X22.9896Y59.4887I-7.0487J4.1377
ok
G3X23.1791Y61.0297I-10.6383J2.0903
ok
G3X23.1478Y64.1156I-28.3994J1.2556
ok
G0Z2.0000
ok
G0X23.3866Y64.1140
G1Z-0.0800F70
ok
G1X24.4878Y64.0889F100
G0Z2.0000
ok
G0X24.7769Y62.1407
G1Z-0.0800F70
ok
G1X24.1869Y60.2273F100
ok
ok
G2X23.3857Y57.9933I-26.0566J8.0848
ok
ok
G2X22.1197Y56.1228I-6.2907J2.8938
ok
ok
G2X21.4281Y55.6487I-1.7781J1.8521
ok
G1X21.0135Y55.5273
ok
G2X19.6513Y48.3751I-203.3308J35.0214
ok
G1X18.3206Y41.2610
G0Z2.0000
ok
G0X8.8433Y41.9443
G1Z-0.0800F70
ok
G1X9.3028Y43.2703F100
ok
G2X9.7839Y44.3657I9.8234J-3.6604
ok
G1X11.1946Y47.0796
ok
X11.8233Y48.2139
ok
ok
G3X12.3015Y49.3906I-5.4598J2.9041
ok
ok
G3X12.6091Y50.8104I-11.9952J3.3425
ok
G3X12.7028Y52.2552I-7.7748J1.2298
ok
ok
G3X12.5087Y53.7679I-9.4378J-0.4428
ok
G3X11.9395Y56.1482I-34.3318J-6.9513
ok
G3X10.2303Y61.0632I-57.0417J-17.0807
G1X9.9975Y61.8311
ok
X9.5137Y63.8615
ok
G2X9.0852Y67.3104I16.0411J3.7441
ok
G2X9.1423Y68.4075I11.3421J-0.0401
G1X9.2914Y69.5073
ok
ok
G2X9.8746Y72.1943I35.0066J-6.1917
ok
k
G2X10.3433Y73.7386I23.5286J-6.2975
ok
G3X11.7952Y77.8279I-140.8513J52.3106
ok
ok
G3X12.7245Y81.7391I-24.1856J7.8128
ok
G3X13.2644Y87.3706I-38.4655J6.5289
ok
G3X13.2032Y88.8933I-13.9530J0.2022
ok
G3X12.9314Y91.0630I-30.9346J-2.7739
G1X12.2590Y94.4835
ok
G0Z2.0000
G0X12.8159Y95.5676
ok
G1Z-0.0800F70
ok
G3X13.3618Y96.4799I-1.1704J1.3198F100
ok
G3X13.3284Y97.9290I-1.8833J0.6817
ok
G1X13.0891Y98.4180
ok
X12.5238Y99.3590
ok
ok
G2X11.7851Y100.9702I16.0810J8.3477
G0Z2.0000
ok
G0X11.8443Y101.9115
G1Z-0.0800F70
ok
G1X12.1662Y101.6443F100
ok
ok
G3X12.6901Y101.4067I0.8813J1.2472
ok
G3X13.1356Y101.4730I0.1205J0.7207
ok
G1X13.4051Y101.6393
ok
ok
G3X13.6992Y102.0463I-1.0613J1.0765
ok
G0Z2.0000
G0X15.6304Y100.6473
ok
G1Z-0.0800F70
G1X16.2385Y101.0466F100
ok
X15.7579Y101.9717
ok
G2X15.3302Y103.2029I4.1253J2.1233
ok
ok
G2X15.6153Y104.4791I1.3524J0.3679
ok
ok
G2X16.2249Y105.0331I1.9796J-1.5662
ok
G1X16.7532Y105.3375
ok
G2X17.5625Y105.6226I2.5494J-5.9460
ok
G0Z2.0000
G0X19.2685Y105.0276
ok
G1Z-0.0800F70
ok
G2X19.8464Y105.0441I0.3079J-0.6558F100
ok
G2X20.1555Y104.6621I-0.2451J-0.5144
ok
ok
G2X20.1760Y104.1020I-0.9622J-0.3157
ok
ok
G1X20.0534Y103.7636
G2X19.5503Y103.3297I-0.6698J0.2679
ok
G0Z2.0000
G0X20.1592Y101.3182
ok
G1Z-0.0800F70
G1X19.8501Y101.8137F100
ok
X19.5216Y102.1667
ok
G0Z2.0000
G0X21.8515Y101.1628
ok
G1Z-0.0800F70
ok
G1X21.5509Y95.8692F100
ok
X21.4718Y94.0569
ok
ok
G2X20.5063Y76.7053I-2925.9016J154.1118
ok
ok
G1X24.9271Y87.5743
G0Z2.0000
ok
G0X25.4806Y81.3114
ok
G1Z-0.0800F70
ok
G1X25.9237Y79.0811F100
ok
G0Z2.0000
G0X24.6561Y80.4572
G1Z-0.0800F70
ok
ok
G1X26.7449Y79.9371F100
ok
G0Z2.0000
ok
G0X26.4615Y81.0099
ok
G1Z-0.0800F70
ok
G1X24.9411Y79.3820F100
ok
G0Z2.0000
ok
G0X24.0511Y79.4844
ok
G1Z-0.0800F70
ok
G1X23.8851Y77.0275F100
ok
G0Z2.0000
ok
G0X26.1569Y75.3869
ok
G1Z-0.0800F70
ok
G1X24.6967Y75.3695F100
ok
G0Z2.0000
ok
G0X25.9253Y74.7210
ok
G1Z-0.0800F70
ok
G1X27.0072Y72.7049F100
ok
G0Z2.0000
ok
G0X25.4025Y73.6459
ok
G1Z-0.0800F70
ok
G1X27.5264Y73.7807F100
ok
G0Z2.0000
ok
G0X26.9398Y74.7291
ok
G1Z-0.0800F70
ok
G1X25.9913Y72.6957F100
ok
G0Z2.0000
ok
G0X26.3946Y68.1753
ok
G1Z-0.0800F70
ok
G1X27.4765Y66.1591F100
ok
G0Z2.0000
ok
G0X25.8718Y67.1001
ok
G1Z-0.0800F70
ok
G1X27.9957Y67.2349F100
ok
G0Z2.0000
ok
G0X27.4091Y68.1833
ok
G1Z-0.0800F70
ok
G1X26.4606Y66.1499F100
ok
G0Z2.0000
ok
G0X26.9997Y63.0312
ok
G1Z-0.0800F70
ok
G1X28.0815Y61.0151F100
ok
G0Z2.0000
ok
G0X26.4768Y61.9561
ok
G1Z-0.0800F70
ok
G1X28.6008Y62.0908F100
ok
G0Z2.0000
ok
G0X28.0141Y63.0393
ok
G1Z-0.0800F70
ok
G1X27.0657Y61.0059F100
ok
G0Z2.0000
ok
G0X21.8470Y64.0540
ok
G1Z-0.0800F70
ok
ok
G2X21.9393Y62.3711I-22.3760J-2.0715F100
ok
ok
G2X21.5100Y57.6020I-29.2743J0.2315
ok
ok
G2X21.1601Y56.1714I-11.1816J1.9768
ok
ok
G1X21.1053Y56.0257
G2X20.8078Y55.5866I-2.1153J1.1127
ok
G2X20.5924Y55.4323I-0.3869J0.3124
ok
G1X20.5093Y55.4170
ok
G2X20.2385Y55.5457I0.0154J0.3817
ok
G2X19.8781Y56.0413I1.2062J1.2561
ok
G1X19.5331Y56.9232
ok
**** The communicator has been paused ****

**** Pausing file transfer. ****

Error detectado mientras se enviaba 'G1X20.5093Y55.4170': (error:33) Motion command target is invalid. La transmisión de datos fue pausada.

MarquinaLuz · 2024-09-17T21:47:39Z

MarquinaLuz
Sep 17, 2024
Author

*** Connecting to jserialcomm://COM3:115200
x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[MSG:Grbl_ESP32 Ver 1.3a Date 20211103]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:ESP32_V4]
[MSG:Axis count 3]
[MSG:RMT Steps]
[MSG:Init Motors]
[MSG:Global stepper disable pin:GPIO(22)]
[MSG:X Axis Standard Stepper Step:GPIO(27) Dir:GPIO(14) Disable:None Limits(-6000.000,0.000)]
[MSG:Y Axis Standard Stepper Step:GPIO(25) Dir:GPIO(26) Disable:None Limits(-6000.000,0.000)]
[MSG:Z Axis Standard Stepper Step:GPIO(32) Dir:GPIO(33) Disable:None Limits(-6000.000,0.000)]
[MSG:PWM spindle Output:GPIO(4), Enbl:GPIO(2), Dir:GPIO(15), Freq:5000Hz, Res:13bits]
[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]
[MSG:X Axis limit switch on pin GPIO(16)]
[MSG:Y Axis limit switch on pin GPIO(17)]
[MSG:Z Axis limit switch on pin GPIO(21)]
[MSG:Probe on pin GPIO(36)]
Grbl 1.3a ['$' for help]
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:0.000,0.000,0.000>
*** Fetching device status

?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>
ok
$I
[VER:1.3a.20211103:]
[OPT:PHBSW]
[MSG:Using machine:ESP32_V4]
[MSG:Mode=STA:SSID=:Status=Not connected:IP=0.0.0.0:MAC=78-21-84-7C-7A-A8]
[MSG:Mode=AP:SSDI=GRBL_ESP:IP=192.168.0.1:MAC=78-21-84-7C-7A-A9]
[MSG:No BT]
ok
$$
$0 = 10 (Step pulse time, microseconds)
$1 = 250 (Step idle delay, milliseconds)
$2 = 0 (Step pulse invert, mask)
$3 = 1 (Step direction invert, mask)
$4 = 0 (Invert step enable pin, boolean)
$5 = 1 (Invert limit pins, boolean)
$6 = 0 (Invert probe pin, boolean)
$10 = 1 (Status report options, mask)
$11 = 0.010 (Junction deviation, millimeters)
$12 = 0.002 (Arc tolerance, millimeters)
$13 = 0 (Report in inches, boolean)
$20 = 0 (Soft limits enable, boolean)
$21 = 0 (Hard limits enable, boolean)
$22 = 0 (Homing cycle enable, boolean)
$23 = 0 (Homing direction invert, mask)
$24 = 2000.000 (Homing locate feed rate, mm/min)
$25 = 2000.000 (Homing search seek rate, mm/min)
$26 = 250.000 (Homing switch debounce delay, milliseconds)
$27 = 1.000 (Homing switch pull-off distance, millimeters)
$30 = 24000.000 (Maximum spindle speed, RPM)
$31 = 0.000 (Minimum spindle speed, RPM)
$32 = 0 (Laser-mode enable, boolean)
$100 = 10.681 (X-axis travel resolution, step/mm)
$101 = 9.980 (Y-axis travel resolution, step/mm)
$102 = 200.400 (Z-axis travel resolution, step/mm)
$103 = 100.000
$104 = 100.000
$105 = 100.000
$110 = 2500.000 (X-axis maximum rate, mm/min)
$111 = 2500.000 (Y-axis maximum rate, mm/min)
$112 = 600.000 (Z-axis maximum rate, mm/min)
$113 = 1000.000
$114 = 1000.000
$115 = 1000.000
$120 = 2500.000 (X-axis acceleration, mm/sec^2)
$121 = 2500.000 (Y-axis acceleration, mm/sec^2)
$122 = 1000.000 (Z-axis acceleration, mm/sec^2)
$123 = 200.000
$124 = 200.000
$125 = 200.000
$130 = 6000.000 (X-axis maximum travel, millimeters)
$131 = 6000.000 (Y-axis maximum travel, millimeters)
$132 = 6000.000 (Z-axis maximum travel, millimeters)
$133 = 300.000
$134 = 300.000
$135 = 300.000
ok
$G
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0]
ok
*** Connected to GRBL 1.3a
**** Connection closed ****
*** Connecting to jserialcomm://COM3:115200
x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[MSG:Grbl_ESP32 Ver 1.3a Date 20211103]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:ESP32_V4]
[MSG:Axis count 3]
[MSG:RMT Steps]
[MSG:Init Motors]
[MSG:Global stepper disable pin:GPIO(22)]
[MSG:X Axis Standard Stepper Step:GPIO(27) Dir:GPIO(14) Disable:None Limits(-6000.000,0.000)]
[MSG:Y Axis Standard Stepper Step:GPIO(25) Dir:GPIO(26) Disable:None Limits(-6000.000,0.000)]
[MSG:Z Axis Standard Stepper Step:GPIO(32) Dir:GPIO(33) Disable:None Limits(-6000.000,0.000)]
[MSG:PWM spindle Output:GPIO(4), Enbl:GPIO(2), Dir:GPIO(15), Freq:5000Hz, Res:13bits]
[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]
[MSG:X Axis limit switch on pin GPIO(16)]
[MSG:Y Axis limit switch on pin GPIO(17)]
[MSG:Z Axis limit switch on pin GPIO(21)]
[MSG:Probe on pin GPIO(36)]
Grbl 1.3a ['$' for help]
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:0.000,0.000,0.000>
*** Fetching device status
?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>
ok
$I
[VER:1.3a.20211103:]
[OPT:PHBSW]
[MSG:Using machine:ESP32_V4]
[MSG:Mode=STA:SSID=:Status=Not connected:IP=0.0.0.0:MAC=78-21-84-7C-7A-A8]
[MSG:Mode=AP:SSDI=GRBL_ESP:IP=192.168.0.1:MAC=78-21-84-7C-7A-A9]
[MSG:No BT]
ok
$$
$0 = 10 (Step pulse time, microseconds)
$1 = 250 (Step idle delay, milliseconds)
$2 = 0 (Step pulse invert, mask)
$3 = 1 (Step direction invert, mask)
$4 = 0 (Invert step enable pin, boolean)
$5 = 1 (Invert limit pins, boolean)
$6 = 0 (Invert probe pin, boolean)
$10 = 1 (Status report options, mask)
$11 = 0.010 (Junction deviation, millimeters)
$12 = 0.002 (Arc tolerance, millimeters)
$13 = 0 (Report in inches, boolean)
$20 = 0 (Soft limits enable, boolean)
$21 = 0 (Hard limits enable, boolean)
$22 = 0 (Homing cycle enable, boolean)
$23 = 0 (Homing direction invert, mask)
$24 = 2000.000 (Homing locate feed rate, mm/min)
$25 = 2000.000 (Homing search seek rate, mm/min)
$26 = 250.000 (Homing switch debounce delay, milliseconds)
$27 = 1.000 (Homing switch pull-off distance, millimeters)
$30 = 24000.000 (Maximum spindle speed, RPM)
$31 = 0.000 (Minimum spindle speed, RPM)
$32 = 0 (Laser-mode enable, boolean)
$100 = 10.681 (X-axis travel resolution, step/mm)
$101 = 9.980 (Y-axis travel resolution, step/mm)
$102 = 200.400 (Z-axis travel resolution, step/mm)
$103 = 100.000
$104 = 100.000
$105 = 100.000
$110 = 2500.000 (X-axis maximum rate, mm/min)
$111 = 2500.000 (Y-axis maximum rate, mm/min)
$112 = 600.000 (Z-axis maximum rate, mm/min)
$113 = 1000.000
$114 = 1000.000
$115 = 1000.000
$120 = 2500.000 (X-axis acceleration, mm/sec^2)
$121 = 2500.000 (Y-axis acceleration, mm/sec^2)
$122 = 1000.000 (Z-axis acceleration, mm/sec^2)
$123 = 200.000
$124 = 200.000
$125 = 200.000
$130 = 6000.000 (X-axis maximum travel, millimeters)
$131 = 6000.000 (Y-axis maximum travel, millimeters)
$132 = 6000.000 (Z-axis maximum travel, millimeters)
$133 = 300.000
$134 = 300.000
$135 = 300.000
ok
$G
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0]
ok
*** Connected to GRBL 1.3a
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91Y-50F1000
ok
$J=G21G91X-50F1000
ok
$J=G21G91X-50F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
$J=G21G91Z-1F1000
ok
G10 P0 L20 X0
ok
G10 P0 L20 Y0
ok
G10 P0 L20 Z0
ok
**** Connection closed ****
*** Connecting to jserialcomm://COM3:115200
x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[MSG:Grbl_ESP32 Ver 1.3a Date 20211103]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:ESP32_V4]
[MSG:Axis count 3]
[MSG:RMT Steps]
[MSG:Init Motors]
[MSG:Global stepper disable pin:GPIO(22)]
[MSG:X Axis Standard Stepper Step:GPIO(27) Dir:GPIO(14) Disable:None Limits(-6000.000,0.000)]
[MSG:Y Axis Standard Stepper Step:GPIO(25) Dir:GPIO(26) Disable:None Limits(-6000.000,0.000)]
[MSG:Z Axis Standard Stepper Step:GPIO(32) Dir:GPIO(33) Disable:None Limits(-6000.000,0.000)]
[MSG:PWM spindle Output:GPIO(4), Enbl:GPIO(2), Dir:GPIO(15), Freq:5000Hz, Res:13bits]
[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]
[MSG:X Axis limit switch on pin GPIO(16)]
[MSG:Y Axis limit switch on pin GPIO(17)]
[MSG:Z Axis limit switch on pin GPIO(21)]
[MSG:Probe on pin GPIO(36)]
Grbl 1.3a ['$' for help]
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:-100.000,-350.000,-8.000>
*** Fetching device status
?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>
ok
$I
[VER:1.3a.20211103:]
[OPT:PHBSW]
[MSG:Using machine:ESP32_V4]
[MSG:Mode=STA:SSID=:Status=Not connected:IP=0.0.0.0:MAC=78-21-84-7C-7A-A8]
[MSG:Mode=AP:SSDI=GRBL_ESP:IP=192.168.0.1:MAC=78-21-84-7C-7A-A9]
[MSG:No BT]
ok
$$
$0 = 10 (Step pulse time, microseconds)
$1 = 250 (Step idle delay, milliseconds)
$2 = 0 (Step pulse invert, mask)
$3 = 1 (Step direction invert, mask)
$4 = 0 (Invert step enable pin, boolean)
$5 = 1 (Invert limit pins, boolean)
$6 = 0 (Invert probe pin, boolean)
$10 = 1 (Status report options, mask)
$11 = 0.010 (Junction deviation, millimeters)
$12 = 0.002 (Arc tolerance, millimeters)
$13 = 0 (Report in inches, boolean)
$20 = 0 (Soft limits enable, boolean)
$21 = 0 (Hard limits enable, boolean)
$22 = 0 (Homing cycle enable, boolean)
$23 = 0 (Homing direction invert, mask)
$24 = 2000.000 (Homing locate feed rate, mm/min)
$25 = 2000.000 (Homing search seek rate, mm/min)
$26 = 250.000 (Homing switch debounce delay, milliseconds)
$27 = 1.000 (Homing switch pull-off distance, millimeters)
$30 = 24000.000 (Maximum spindle speed, RPM)
$31 = 0.000 (Minimum spindle speed, RPM)
$32 = 0 (Laser-mode enable, boolean)
$100 = 10.681 (X-axis travel resolution, step/mm)
$101 = 9.980 (Y-axis travel resolution, step/mm)
$102 = 200.400 (Z-axis travel resolution, step/mm)
$103 = 100.000
$104 = 100.000
$105 = 100.000
$110 = 2500.000 (X-axis maximum rate, mm/min)
$111 = 2500.000 (Y-axis maximum rate, mm/min)
$112 = 600.000 (Z-axis maximum rate, mm/min)
$113 = 1000.000
$114 = 1000.000
$115 = 1000.000
$120 = 2500.000 (X-axis acceleration, mm/sec^2)
$121 = 2500.000 (Y-axis acceleration, mm/sec^2)
$122 = 1000.000 (Z-axis acceleration, mm/sec^2)
$123 = 200.000
$124 = 200.000
$125 = 200.000
$130 = 6000.000 (X-axis maximum travel, millimeters)
$131 = 6000.000 (Y-axis maximum travel, millimeters)
$132 = 6000.000 (Z-axis maximum travel, millimeters)
$133 = 300.000
$134 = 300.000
$135 = 300.000
ok
$G
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0]
ok
*** Connected to GRBL 1.3a
G10 P0 L20 X0
ok
G10 P0 L20 Y0
ok
G10 P0 L20 Z0
ok

G90
G21
G49
G0Z2.0000
M3S9000
G4P2.50
G0X2.9570Y32.8781Z2.0000
G1Z-0.0300F70
G1X2.0599Y31.5322F120
X1.6588Y30.8590
ok
ok
ok
ok
G3X1.3189Y30.1559I4.5279J-2.6222
ok
ok
ok
G3X0.3461Y25.6075I15.3613J-5.6637
ok
ok
G3X0.7859Y20.4048I19.3746J-0.9823
ok
ok
G3X2.3458Y16.2366I16.3870J3.7566
ok
G3X4.9544Y12.3278I22.2112J11.9980
G1X6.6072Y10.4084
ok
Run|MPos:2.996,32.866,1.118|FS:70,9000|Ov:100,100,100|A:S>
X2.5910Y8.4257
X6.7724Y7.9806
ok
X6.1955Y5.1083
X9.9671Y5.4718
X10.5637Y1.8574
ok
X13.9060Y3.7468
X15.0228Y1.9596
ok
X14.9830Y0.6807
ok
X18.1329Y0.4670
ok
ok
G3X20.3718Y0.4631I1.1606J23.3350
ok
ok
G1X23.9648Y0.6828
ok
X23.2870Y2.9765
ok
X25.0058Y4.2437
ok
X27.0998Y3.4131
ok
X28.8918Y6.5103
ok
X32.3595Y5.4064
X32.3382Y9.3358
ok
X37.3866Y10.0494
ok
X32.1687Y11.8298
ok
X33.7175Y13.2091
ok
ok
G3X35.5614Y15.2585I-16.2791J16.5004
ok
ok
G3X36.4735Y16.5163I-11.2931J9.1493
ok
ok
G3X37.8963Y19.3737I-13.3271J8.4190
ok
ok
G3X38.5992Y22.7701I-10.1517J3.8718
ok
G3X38.5547Y24.6511I-13.6900J0.6168
G1X38.4813Y25.1228
ok
X38.1079Y26.5199
X37.9193Y25.2745
ok
G2X37.5491Y23.7209I-20.5094J4.0663
ok
G2X37.1467Y22.6163I-7.0715J1.9503
ok
ok
G2X33.6861Y18.3861I-10.2400J4.8465
ok
ok
G2X30.5063Y16.4520I-9.5098J12.0539
ok
G2X29.2608Y16.0710I-2.3515J5.4605
G1X28.6218Y16.0208
ok
X28.7087Y17.0046
ok
G3X28.6499Y17.9825I-5.5712J0.1558
ok
G3X28.1906Y19.0827I-2.1124J-0.2359
G1X27.6894Y19.6460
ok
ok
G3X27.2281Y19.9739I-1.4614J-1.5673
ok
G1X27.2227Y21.9833
ok
G3X28.6091Y22.9412I-0.3032J1.9210
G1X28.6463Y23.0447
ok
X28.2331Y30.1619
ok
X29.3808Y30.0938
X29.7616Y30.0922
ok
ok
G3X31.2811Y30.2486I-1.3748J20.8167
G1X27.4890Y47.2832
ok
X28.0443Y49.1380
ok
ok
G3X28.3373Y50.5949I-14.0842J3.5898
ok
ok
G3X28.9006Y56.5339I-49.3125J7.6736
ok
G3X28.9593Y59.1273I-64.9138J2.7659
ok
ok
G3X28.7193Y66.9493I-148.8864J-0.6541
ok
G3X28.3037Y73.5682I-226.6040J-10.9032
ok
G3X27.6494Y80.1667I-151.6131J-11.7021
ok
G3X26.4876Y87.6669I-123.4071J-15.2764
ok
G3X25.1484Y94.2462I-264.5877J-50.4321
ok
G3X23.3260Y101.0071I-58.8784J-12.2446
ok
G3X22.0704Y104.1952I-28.9900J-9.5759
ok
G3X21.0846Y105.9848I-13.6521J-6.3534
ok
G3X20.0023Y107.5954I-26.3715J-16.5527
ok
G3X18.7234Y109.0489I-7.5128J-5.3209
ok
G3X17.9687Y109.6158I-3.5331J-3.9177
ok
G3X14.6555Y110.4315I-3.0112J-5.0948
ok
G3X11.9121Y109.4182I0.2221J-4.8218
ok
G3X10.3463Y107.6584I3.3916J-4.5943
ok
G3X9.7478Y105.6041I5.5083J-2.7190
ok
G3X9.6471Y104.3884I9.2953J-1.3824
ok
G3X9.7379Y103.2843I7.1312J0.0312
G1X10.0144Y101.8275
ok
G3X10.3871Y100.3919I15.5672J3.2758
ok
G1X10.8311Y98.9744
ok
G2X12.2589Y94.4835I-82.3801J-28.6637
ok
G1X11.3702Y91.6732
ok
G3X9.5345Y84.2518I127.2073J-35.4039
ok
G1X8.4066Y78.9152
ok
G3X7.6776Y74.4278I53.7370J-11.0323
ok
G3X7.1394Y64.3367I66.8690J-8.6265
ok
G3X7.7355Y52.8732I160.2447J2.5867
ok
G1X8.7283Y43.1893
ok
X8.8993Y41.2684
X9.3788Y35.0289
ok
X10.6572Y16.2038
X9.6566Y16.5419
ok
G2X8.6516Y17.1637I2.0728J4.4733
ok
ok
G2X6.2226Y19.5695I9.6725J12.1951
ok
ok
G2X4.7014Y21.7851I12.1722J9.9873
ok
ok
G2X3.4568Y24.3605I17.3769J9.9860
ok
G2X2.7236Y27.0218I11.4965J4.5989
ok
G2X2.5505Y30.2094I17.1125J2.5279
ok
G2X2.7137Y31.5474I9.0021J-0.4187
G1X2.9570Y32.8781
G0Z2.0000
ok
G0X6.6072Y10.4084
G1Z-0.0800F70
ok
ok
G2X8.6374Y11.2398I11.9785J-26.3554F100
ok
G2X8.2641Y11.8948I1.5294J1.3058
ok
ok
G2X8.2674Y12.2887I0.6197J0.1916
ok
ok
G2X8.5710Y12.4577I0.2324J-0.0602
ok
G2X9.1749Y12.0869I-0.2349J-1.0597
ok
G2X9.6034Y11.4109I-1.5499J-1.4565
G0Z2.0000
ok
G0X10.5154Y11.9488
G1Z-0.0800F70
ok
G1X10.5420Y12.4718F100
X10.6150Y12.7957
ok
G2X11.1971Y14.1834I8.9153J-2.9238
G0Z2.0000
ok
ok
G0X10.7676Y14.5480
ok
G1Z-0.0800F70
ok
ok
G3X11.6274Y15.4130I-11.2053J11.9982F100
ok
G3X12.2570Y16.5923I-2.7913J2.2480
ok
ok
G3X12.6069Y19.3781I-7.0025J2.2942
ok
ok
G3X12.3238Y20.5103I-3.3317J-0.2315
G1X12.0554Y21.0067
ok
G3X11.0550Y22.4306I-22.6033J-14.8171
ok
G2X10.6367Y23.1635I3.9056J2.7151
ok
G2X10.3917Y24.4014I2.4774J1.1336
ok
ok
G2X10.6234Y25.7325I4.8013J-0.1500
ok
G2X10.9471Y26.6110I9.2172J-2.8972
G1X11.7278Y28.3623
ok
G3X12.2823Y30.1289I-6.8590J3.1231
ok
G3X12.1644Y31.8570I-3.7116J0.6149
ok
G3X11.8505Y32.6529I-5.3331J-1.6435
ok
G1X11.4321Y33.4257
ok
X10.4842Y34.9477
X10.0560Y35.7196
ok
G2X9.5444Y37.3424I4.2530J2.2329
ok
G2X9.5603Y38.6106I5.6772J0.5630
ok
ok
G2X9.8071Y39.8802I9.4076J-1.1703
ok
ok
G2X10.7202Y42.8042I61.2451J-17.5197
ok
G2X11.2293Y44.0940I17.0871J-5.9992
G1X11.9935Y45.7761
ok
G2X13.0476Y47.7053I26.0774J-12.9962
ok
G3X13.5670Y48.9034I-5.9034J3.2711
ok
G3X14.0213Y51.5191I-10.0722J3.0965
ok
ok
G3X14.0158Y52.3987I-8.9285J0.3844
ok
G3X13.7639Y54.3415I-14.4442J-0.8853
ok
G3X13.2976Y56.2684I-23.7437J-4.7259
G1X12.0103Y60.4464
ok
X11.2892Y62.3641
X11.0570Y63.1421
ok
G2X10.4758Y68.4201I23.1307J5.2181
ok
G2X10.8953Y71.3706I10.3016J0.0407
ok
G1X11.6891Y74.0187
ok
ok
G2X12.6815Y76.9141I76.2541J-24.5174
ok
G3X13.0954Y78.3228I-20.1843J6.6970
ok
G3X13.6741Y80.8392I-37.8119J10.0202
ok
ok
G3X14.2077Y85.9411I-30.5524J5.7745
G1X14.2113Y87.6427
ok
G3X13.8250Y91.2098I-19.7478J-0.3340
ok
G3X12.5758Y96.4266I-58.7761J-11.3164
ok
ok
G2X10.6410Y102.8719I116.0271J38.3438
ok
G2X10.5733Y105.2318I4.6069J1.3131
ok
G2X11.4328Y107.0933I4.2106J-0.8149
ok
G2X12.6710Y108.1718I3.5507J-2.8264
ok
G2X13.8272Y108.6347I2.3018J-4.0741
ok
G2X14.8224Y108.8001I1.4495J-5.6467
ok
G2X16.3954Y108.6072I0.2857J-4.1801
ok
G2X18.3019Y107.6888I-1.8050J-6.1855
ok
G2X19.1784Y106.8037I-2.3539J-3.2074
ok
G2X20.5624Y104.5162I-11.8282J-8.7190
ok
G2X21.4307Y102.5561I-16.5620J-8.5092
ok
G1X21.6372Y101.9359
X22.8937Y97.3403
X23.7178Y94.0828
ok
G2X24.2308Y91.6346I-46.7936J-11.0816
ok
G1X24.9430Y87.5120
X25.1467Y86.4500
ok
ok
G2X25.1712Y85.8282I-2.9150J-0.4261
ok
ok
G2X25.0501Y85.0333I-4.8917J0.3386
ok
G2X24.4866Y83.1235I-16.6738J3.8820
ok
ok
G2X23.3424Y80.1125I-75.9166J27.1238
G1X21.8909Y76.7126
ok
X20.0509Y76.7026
X19.9398Y64.1415
ok
X23.3861Y64.1135
X22.6809Y70.5029
ok
X21.8920Y76.7126
G0Z2.0000
ok
G0X22.7194Y76.3195
G1Z-0.0800F70
ok
ok
G1X21.9516Y76.2900F100
G0Z2.0000
ok
ok
G0X20.0500Y76.6909
G1Z-0.0800F70
ok
ok
G1X19.8683Y76.9079F100
ok
X19.8271Y76.9899
ok
ok
G2X19.7069Y77.9711I2.6705J0.8253
ok
G1X19.7992Y79.3305
ok
X19.7931Y79.6640
ok
ok
G3X19.6511Y81.2568I-15.3279J-0.5641
ok
ok
G3X18.7586Y83.4747I-5.1218J-0.7725
ok
G3X17.4449Y84.9451I-7.3216J-5.2192
ok
ok
G3X17.0184Y84.4995I0.1457J-0.5663
G0Z2.0000
ok
G0X16.5886Y83.9737
G1Z-0.0800F70
ok
G1X16.6224Y84.2078F100
ok
G2X16.9852Y84.5341I0.4704J-0.1581
G1X17.6342Y83.8313
ok
ok
G2X18.4099Y82.6455I-5.1946J-4.2447
ok
ok
G2X19.0786Y81.0557I-6.7632J-3.7807
ok
G0Z2.0000
G0X18.5197Y80.6160
ok
G1Z-0.0800F70
ok
G1X18.1847Y81.5410F100
ok
G3X17.1512Y83.3135I-7.5017J-3.1866
ok
G3X16.5207Y84.0357I-3.8941J-2.7633
ok
G1X16.3552Y83.8945
ok
ok
X16.2999Y83.7236
X16.2825Y83.4387
ok
G3X16.4909Y83.0220I0.7652J0.1223
ok
G0Z2.0000
G0X13.9724Y82.6224
ok
G1Z-0.0800F70
ok
G1X15.2250Y84.0321F100
ok
ok
G2X15.8832Y84.6560I4.4716J-4.0587
G1X16.0766Y84.4543
ok
ok
G2X16.2301Y83.9458I-0.5800J-0.4525
ok
ok
G1X16.1738Y83.7947
G0Z2.0000
ok
G0X13.7382Y81.2450
G1Z-0.0800F70
ok
G1X14.7214Y82.5994F100
ok
X15.3844Y83.4290
X15.7320Y83.7975
ok
X15.9222Y83.9467
ok
ok
G2X16.1451Y83.1800I-0.1571J-0.4614
ok
G0Z2.0000
ok
G0X18.0584Y80.3640
ok
G1Z-0.0800F70
ok
G1X17.7521Y81.1536F100
ok
ok
G3X16.6845Y82.8359I-6.9621J-3.2383
G1X16.4896Y83.0247
ok
X16.3462Y82.8343
ok
X16.3145Y82.7637
ok
ok
G3X16.3814Y82.1064I0.9436J-0.2361
ok
G3X17.0517Y81.0751I9.9428J5.7292
ok
G1X17.1668Y80.8738
ok
ok
G2X17.4941Y80.0354I-4.2739J-2.1513
ok
G2X17.6296Y79.0082I-3.6796J-1.0081
ok
G2X17.5264Y76.7359I-19.7603J-0.2409
ok
ok
G3X17.5810Y75.4388I6.3812J-0.3813
ok
G3X17.8704Y74.6893I1.9762J0.3325
ok
G3X18.3434Y74.2478I1.2790J0.8960
G1X18.7634Y74.0292
ok
X18.9586Y73.9611
ok
G3X20.0042Y73.8098I1.2877J5.2121
G0Z2.0000
ok
G0X20.0021Y72.7650
G1Z-0.0800F70
ok
G1X19.5773Y71.9513F100
ok
ok
G3X19.1213Y70.5207I8.1695J-3.3922
G1X18.8603Y69.3385
ok
ok
G3X18.2740Y65.7336I106.4382J-19.1622
ok
ok
G3X17.8663Y60.7057I39.1646J-5.7059
ok
G3X18.3370Y57.3379I11.9155J-0.0513
ok
ok
G3X18.9806Y56.0773I4.1991J1.3493
G1X19.2270Y55.8102
ok
G3X19.5184Y55.6097I0.9029J0.9999
ok
G3X20.6386Y55.4296I0.8581J1.7643
ok
G3X21.4110Y55.8572I-0.0909J1.0757
ok
G1X21.9742Y56.6835
ok
G3X22.9896Y59.4887I-7.0487J4.1377
ok
G3X23.1791Y61.0297I-10.6383J2.0903
ok
G3X23.1478Y64.1156I-28.3994J1.2556
ok
G0Z2.0000
ok
G0X23.3866Y64.1140
G1Z-0.0800F70
ok
G1X24.4878Y64.0889F100
G0Z2.0000
ok
G0X24.7769Y62.1407
G1Z-0.0800F70
ok
G1X24.1869Y60.2273F100
ok
ok
G2X23.3857Y57.9933I-26.0566J8.0848
ok
ok
G2X22.1197Y56.1228I-6.2907J2.8938
ok
ok
G2X21.4281Y55.6487I-1.7781J1.8521
ok
G1X21.0135Y55.5273
ok
G2X19.6513Y48.3751I-203.3308J35.0214
ok
G1X18.3206Y41.2610
G0Z2.0000
ok
G0X8.8433Y41.9443
G1Z-0.0800F70
ok
G1X9.3028Y43.2703F100
ok
G2X9.7839Y44.3657I9.8234J-3.6604
ok
G1X11.1946Y47.0796
ok
X11.8233Y48.2139
ok
ok
G3X12.3015Y49.3906I-5.4598J2.9041
ok
ok
G3X12.6091Y50.8104I-11.9952J3.3425
ok
G3X12.7028Y52.2552I-7.7748J1.2298
ok
ok
G3X12.5087Y53.7679I-9.4378J-0.4428
ok
G3X11.9395Y56.1482I-34.3318J-6.9513
ok
G3X10.2303Y61.0632I-57.0417J-17.0807
G1X9.9975Y61.8311
ok
X9.5137Y63.8615
ok
G2X9.0852Y67.3104I16.0411J3.7441
ok
G2X9.1423Y68.4075I11.3421J-0.0401
G1X9.2914Y69.5073
ok
ok
G2X9.8746Y72.1943I35.0066J-6.1917
ok
k
G2X10.3433Y73.7386I23.5286J-6.2975
ok
G3X11.7952Y77.8279I-140.8513J52.3106
ok
ok
G3X12.7245Y81.7391I-24.1856J7.8128
ok
G3X13.2644Y87.3706I-38.4655J6.5289
ok
G3X13.2032Y88.8933I-13.9530J0.2022
ok
G3X12.9314Y91.0630I-30.9346J-2.7739
G1X12.2590Y94.4835
ok
G0Z2.0000
G0X12.8159Y95.5676
ok
G1Z-0.0800F70
ok
G3X13.3618Y96.4799I-1.1704J1.3198F100
ok
G3X13.3284Y97.9290I-1.8833J0.6817
ok
G1X13.0891Y98.4180
ok
X12.5238Y99.3590
ok
ok
G2X11.7851Y100.9702I16.0810J8.3477
G0Z2.0000
ok
G0X11.8443Y101.9115
G1Z-0.0800F70
ok
G1X12.1662Y101.6443F100
ok
ok
G3X12.6901Y101.4067I0.8813J1.2472
ok
G3X13.1356Y101.4730I0.1205J0.7207
ok
G1X13.4051Y101.6393
ok
ok
G3X13.6992Y102.0463I-1.0613J1.0765
ok
G0Z2.0000
G0X15.6304Y100.6473
ok
G1Z-0.0800F70
G1X16.2385Y101.0466F100
ok
X15.7579Y101.9717
ok
G2X15.3302Y103.2029I4.1253J2.1233
ok
ok
G2X15.6153Y104.4791I1.3524J0.3679
ok
ok
G2X16.2249Y105.0331I1.9796J-1.5662
ok
G1X16.7532Y105.3375
ok
G2X17.5625Y105.6226I2.5494J-5.9460
ok
G0Z2.0000
G0X19.2685Y105.0276
ok
G1Z-0.0800F70
ok
G2X19.8464Y105.0441I0.3079J-0.6558F100
ok
G2X20.1555Y104.6621I-0.2451J-0.5144
ok
ok
G2X20.1760Y104.1020I-0.9622J-0.3157
ok
ok
G1X20.0534Y103.7636
G2X19.5503Y103.3297I-0.6698J0.2679
ok
G0Z2.0000
G0X20.1592Y101.3182
ok
G1Z-0.0800F70
G1X19.8501Y101.8137F100
ok
X19.5216Y102.1667
ok
G0Z2.0000
G0X21.8515Y101.1628
ok
G1Z-0.0800F70
ok
G1X21.5509Y95.8692F100
ok
X21.4718Y94.0569
ok
ok
G2X20.5063Y76.7053I-2925.9016J154.1118
ok
ok
G1X24.9271Y87.5743
G0Z2.0000
ok
G0X25.4806Y81.3114
ok
G1Z-0.0800F70
ok
G1X25.9237Y79.0811F100
ok
G0Z2.0000
G0X24.6561Y80.4572
G1Z-0.0800F70
ok
ok
G1X26.7449Y79.9371F100
ok
G0Z2.0000
ok
G0X26.4615Y81.0099
ok
G1Z-0.0800F70
ok
G1X24.9411Y79.3820F100
ok
G0Z2.0000
ok
G0X24.0511Y79.4844
ok
G1Z-0.0800F70
ok
G1X23.8851Y77.0275F100
ok
G0Z2.0000
ok
G0X26.1569Y75.3869
ok
G1Z-0.0800F70
ok
G1X24.6967Y75.3695F100
ok
G0Z2.0000
ok
G0X25.9253Y74.7210
ok
G1Z-0.0800F70
ok
G1X27.0072Y72.7049F100
ok
G0Z2.0000
ok
G0X25.4025Y73.6459
ok
G1Z-0.0800F70
ok
G1X27.5264Y73.7807F100
ok
G0Z2.0000
ok
G0X26.9398Y74.7291
ok
G1Z-0.0800F70
ok
G1X25.9913Y72.6957F100
ok
G0Z2.0000
ok
G0X26.3946Y68.1753
ok
G1Z-0.0800F70
ok
G1X27.4765Y66.1591F100
ok
G0Z2.0000
ok
G0X25.8718Y67.1001
ok
G1Z-0.0800F70
ok
G1X27.9957Y67.2349F100
ok
G0Z2.0000
ok
G0X27.4091Y68.1833
ok
G1Z-0.0800F70
ok
G1X26.4606Y66.1499F100
ok
G0Z2.0000
ok
G0X26.9997Y63.0312
ok
G1Z-0.0800F70
ok
G1X28.0815Y61.0151F100
ok
G0Z2.0000
ok
G0X26.4768Y61.9561
ok
G1Z-0.0800F70
ok
G1X28.6008Y62.0908F100
ok
G0Z2.0000
ok
G0X28.0141Y63.0393
ok
G1Z-0.0800F70
ok
G1X27.0657Y61.0059F100
ok
G0Z2.0000
ok
G0X21.8470Y64.0540
ok
G1Z-0.0800F70
ok
ok
G2X21.9393Y62.3711I-22.3760J-2.0715F100
ok
ok
G2X21.5100Y57.6020I-29.2743J0.2315
ok
ok
G2X21.1601Y56.1714I-11.1816J1.9768
ok
ok
G1X21.1053Y56.0257
G2X20.8078Y55.5866I-2.1153J1.1127
ok
G2X20.5924Y55.4323I-0.3869J0.3124
ok
G1X20.5093Y55.4170
ok
G2X20.2385Y55.5457I0.0154J0.3817
ok
G2X19.8781Y56.0413I1.2062J1.2561
ok
G1X19.5331Y56.9232
ok
**** The communicator has been paused ****

**** Pausing file transfer. ****

Error detectado mientras se enviaba 'G1X20.5093Y55.4170': (error:33) Motion command target is invalid. La transmisión de datos fue pausada.

1 reply

breiler Sep 18, 2024
Collaborator

This is a completely different error than what you originally posted. I am guessing that since you are running gcode programs you are now able to properly connect to the machine.

The error 33 is usually caused by rounding errors when using arc commands. (You can read more about it here: https://softsolder.com/2020/03/18/grbl-error-33-arc-coordinates-vs-decimal-places/)

Your gcode contains four decimals, I think that GRBL only support three, so lower the precision in your CAM settings.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

UGS se desconecta #2605

{{title}}

Replies: 2 comments 4 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

UGS se desconecta #2605

MarquinaLuz Sep 9, 2024

Replies: 2 comments · 4 replies

breiler Sep 9, 2024 Collaborator

MarquinaLuz Sep 14, 2024 Author

breiler Sep 15, 2024 Collaborator

MarquinaLuz Sep 17, 2024 Author

MarquinaLuz Sep 17, 2024 Author

breiler Sep 18, 2024 Collaborator

MarquinaLuz
Sep 9, 2024

Replies: 2 comments 4 replies

breiler
Sep 9, 2024
Collaborator

MarquinaLuz Sep 14, 2024
Author

breiler Sep 15, 2024
Collaborator

MarquinaLuz Sep 17, 2024
Author

MarquinaLuz
Sep 17, 2024
Author

breiler Sep 18, 2024
Collaborator