PC8801SR.sv

//============================================================================
//  PC8801SR
//
//  Copyright (C) 2017,2020 Alexey Melnikov
//  Copyright (C) 2020 Puu
//
//  This program is free software; you can redistribute it and/or modify it
//  under the terms of the GNU General Public License as published by the Free
//  Software Foundation; either version 2 of the License, or (at your option)
//  any later version.
//
//  This program is distributed in the hope that it will be useful, but WITHOUT
//  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
//  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
//  more details.
//
//  You should have received a copy of the GNU General Public License along
//  with this program; if not, write to the Free Software Foundation, Inc.,
//  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
//============================================================================

module emu
(
	//Master input clock
	input         CLK_50M,

	//Async reset from top-level module.
	//Can be used as initial reset.
	input         RESET,

	//Must be passed to hps_io module
	inout  [45:0] HPS_BUS,

	//Base video clock. Usually equals to CLK_SYS.
	output        CLK_VIDEO,

	//Multiple resolutions are supported using different CE_PIXEL rates.
	//Must be based on CLK_VIDEO
	output        CE_PIXEL,

	//Video aspect ratio for HDMI. Most retro systems have ratio 4:3.
	//if VIDEO_ARX[12] or VIDEO_ARY[12] is set then [11:0] contains scaled size instead of aspect ratio.
	output [12:0] VIDEO_ARX,
	output [12:0] VIDEO_ARY,

	output  [7:0] VGA_R,
	output  [7:0] VGA_G,
	output  [7:0] VGA_B,
	output        VGA_HS,
	output        VGA_VS,
	output        VGA_DE,    // = ~(VBlank | HBlank)
	output        VGA_F1,
	output [1:0]  VGA_SL,
	output        VGA_SCALER, // Force VGA scaler

	input  [11:0] HDMI_WIDTH,
	input  [11:0] HDMI_HEIGHT,
	output        HDMI_FREEZE,

`ifdef MISTER_FB
	// Use framebuffer in DDRAM (USE_FB=1 in qsf)
	// FB_FORMAT:
	//    [2:0] : 011=8bpp(palette) 100=16bpp 101=24bpp 110=32bpp
	//    [3]   : 0=16bits 565 1=16bits 1555
	//    [4]   : 0=RGB  1=BGR (for 16/24/32 modes)
	//
	// FB_STRIDE either 0 (rounded to 256 bytes) or multiple of pixel size (in bytes)
	output        FB_EN,
	output  [4:0] FB_FORMAT,
	output [11:0] FB_WIDTH,
	output [11:0] FB_HEIGHT,
	output [31:0] FB_BASE,
	output [13:0] FB_STRIDE,
	input         FB_VBL,
	input         FB_LL,
	output        FB_FORCE_BLANK,

`ifdef MISTER_FB_PALETTE
	// Palette control for 8bit modes.
	// Ignored for other video modes.
	output        FB_PAL_CLK,
	output  [7:0] FB_PAL_ADDR,
	output [23:0] FB_PAL_DOUT,
	input  [23:0] FB_PAL_DIN,
	output        FB_PAL_WR,
`endif
`endif

	output        LED_USER,  // 1 - ON, 0 - OFF.

	// b[1]: 0 - LED status is system status OR'd with b[0]
	//       1 - LED status is controled solely by b[0]
	// hint: supply 2'b00 to let the system control the LED.
	output  [1:0] LED_POWER,
	output  [1:0] LED_DISK,

	// I/O board button press simulation (active high)
	// b[1]: user button
	// b[0]: osd button
	output  [1:0] BUTTONS,

	input         CLK_AUDIO, // 24.576 MHz
	output [15:0] AUDIO_L,
	output [15:0] AUDIO_R,
	output        AUDIO_S,   // 1 - signed audio samples, 0 - unsigned
	output  [1:0] AUDIO_MIX, // 0 - no mix, 1 - 25%, 2 - 50%, 3 - 100% (mono)

	//ADC
	inout   [3:0] ADC_BUS,

	//SD-SPI
	output        SD_SCK,
	output        SD_MOSI,
	input         SD_MISO,
	output        SD_CS,
	input         SD_CD,

	//High latency DDR3 RAM interface
	//Use for non-critical time purposes
	output        DDRAM_CLK,
	input         DDRAM_BUSY,
	output  [7:0] DDRAM_BURSTCNT,
	output [28:0] DDRAM_ADDR,
	input  [63:0] DDRAM_DOUT,
	input         DDRAM_DOUT_READY,
	output        DDRAM_RD,
	output [63:0] DDRAM_DIN,
	output  [7:0] DDRAM_BE,
	output        DDRAM_WE,

	//SDRAM interface with lower latency
	output        SDRAM_CLK,
	output        SDRAM_CKE,
	output [12:0] SDRAM_A,
	output  [1:0] SDRAM_BA,
	inout  [15:0] SDRAM_DQ,
	output        SDRAM_DQML,
	output        SDRAM_DQMH,
	output        SDRAM_nCS,
	output        SDRAM_nCAS,
	output        SDRAM_nRAS,
	output        SDRAM_nWE,

`ifdef MISTER_DUAL_SDRAM
	//Secondary SDRAM
	//Set all output SDRAM_* signals to Z ASAP if SDRAM2_EN is 0
	input         SDRAM2_EN,
	output        SDRAM2_CLK,
	output [12:0] SDRAM2_A,
	output  [1:0] SDRAM2_BA,
	inout  [15:0] SDRAM2_DQ,
	output        SDRAM2_nCS,
	output        SDRAM2_nCAS,
	output        SDRAM2_nRAS,
	output        SDRAM2_nWE,
`endif

	input         UART_CTS,
	output        UART_RTS,
	input         UART_RXD,
	output        UART_TXD,
	output        UART_DTR,
	input         UART_DSR,

	// Open-drain User port.
	// 0 - D+/RX
	// 1 - D-/TX
	// 2..6 - USR2..USR6
	// Set USER_OUT to 1 to read from USER_IN.
	input   [6:0] USER_IN,
	output  [6:0] USER_OUT,

	input         OSD_STATUS
);

///////// Default values for ports not used in this core /////////

assign ADC_BUS  = 'Z;
assign {UART_RTS, UART_DTR} = 0;
assign {SD_SCK, SD_MOSI, SD_CS} = 'Z;
assign {DDRAM_CLK, DDRAM_BURSTCNT, DDRAM_ADDR, DDRAM_DIN, DDRAM_BE, DDRAM_RD, DDRAM_WE} = '0;  

assign VGA_F1 = 0;
assign VGA_SCALER = 0;

assign LED_POWER = 0;
assign BUTTONS = 0;

//////////////////////////////////////////////////////////////////
wire hdd_active = sd_rd[2] || sd_wr[2];
wire fdd_active = |sd_rd[1:0] || |sd_wr[1:0];
assign LED_USER  = fdd_active;
assign LED_DISK  = {1'b1, hdd_active};

wire [1:0] ar = status[2:1];

`include "build_id.v" 
parameter CONF_STR = {
	"PC8801mk2SR;;",
	"-;",
	"O12,Aspect ratio,Original,Full Screen,[ARC1],[ARC2];",
	"O34,Scale,Normal,V-Integer,Narrower HV-Integer,Wider HV-Integer;",
	"O78,Mode,N,N88V1L,N88V1H,N88V2;",
	"O9,Speed,4MHz,8MHz;",
	"R6,Reset;",
	"-;",
	"S0,D88,FDD0;",
	"S1,D88,FDD1;",
	"RF,SYNC FD0;",
	"RG,SYNC FD1;",
	"-;",
	"OA,Basic mode,Terminal,Basic;",
	"OB,Cols,80,40;",
	"OC,Lines,25,20;",
	"OD,Disk boot,Disable,Enable;",
	"OFH,Scandoubler Fx,None,HQ2x,CRT 25%,CRT 50%,CRT 75%;",
	"J,Fire 1,Fire 2;",
	"V,v",`BUILD_DATE
};

/////////////////  CLOCKS  ////////////////////////

wire clk_ram, clk_sys, clk_emu;
wire pll_locked;

pll pll
(
	.refclk(CLK_50M),
	.rst(0),
	.outclk_0(clk_ram),
	.outclk_1(clk_sys),
	.outclk_2(clk_emu),
	.locked(pll_locked)
);

altddio_out
#(
	.extend_oe_disable("OFF"),
	.intended_device_family("Cyclone V"),
	.invert_output("OFF"),
	.lpm_hint("UNUSED"),
	.lpm_type("altddio_out"),
	.oe_reg("UNREGISTERED"),
	.power_up_high("OFF"),
	.width(1)
)
sdramclk_ddr
(
	.datain_h(1'b0),
	.datain_l(1'b1),
	.outclock(clk_ram),
	.dataout(SDRAM_CLK),
	.aclr(1'b0),
	.aset(1'b0),
	.oe(1'b1),
	.outclocken(1'b1),
	.sclr(1'b0),
	.sset(1'b0)
);

/////////////////  HPS  ///////////////////////////

wire [63:0] status;
wire  [1:0] buttons;

wire [15:0] joystick_0, joystick_1;

wire  [5:0] joyA = ~{joystick_0[5:4],joystick_0[0],joystick_0[1],joystick_0[2],joystick_0[3]};
wire  [5:0] joyB = ~{joystick_1[5:4],joystick_1[0],joystick_1[1],joystick_1[2],joystick_1[3]};

wire        ioctl_download;
wire  [7:0] ioctl_index;
wire        ioctl_wr;
wire [24:0] ioctl_addr;
wire  [7:0] ioctl_dout;

wire        ps2_kbd_clk_out;
wire        ps2_kbd_data_out;
wire        ps2_kbd_clk_in;
wire        ps2_kbd_data_in;
wire        ps2_mouse_clk_out;
wire        ps2_mouse_data_out;
wire        ps2_mouse_clk_in;
wire        ps2_mouse_data_in;

wire  [31:0] sd_lba;
wire   [3:0] sd_rd;
wire   [3:0] sd_wr;

wire  [3:0] sd_ack;
wire  [8:0] sd_buff_addr;
wire  [7:0] sd_buff_dout;
wire  [7:0] sd_buff_din;
wire        sd_buff_wr;
wire [15:0] sd_req_type = 0;
wire  [3:0] img_mounted;
wire  [3:0] img_readonly;
wire [63:0] img_size;

wire [65:0] ps2_key;
wire [64:0] sysrtc;
wire forced_scandoubler;
wire [21:0] gamma_bus;
wire  [7:0] uart1_mode;
wire [31:0] uart1_speed;

hps_io #(.CONF_STR(CONF_STR), .PS2DIV(600), .PS2WE(1), .VDNUM(4)) hps_io
(
	.clk_sys(clk_sys),
	.HPS_BUS(HPS_BUS),

	.buttons(buttons),
	.status(status),
	.status_menumask({en216p}),

	.sd_lba(sd_lba),
	.sd_rd(sd_rd),
	.sd_wr(sd_wr),
	.sd_ack(sd_ack),
	.sd_buff_addr(sd_buff_addr),
	.sd_buff_dout(sd_buff_dout),
	.sd_buff_din(sd_buff_din),
	.sd_buff_wr(sd_buff_wr),
	.sd_req_type(sd_req_type),
 
	.img_mounted(img_mounted),
	.img_readonly(img_readonly),
	.img_size(img_size),

	.forced_scandoubler(forced_scandoubler),
	.gamma_bus(gamma_bus),

	.ioctl_download(ioctl_download),
	.ioctl_index(ioctl_index),
	.ioctl_wr(ioctl_wr),
	.ioctl_addr(ioctl_addr),
	.ioctl_dout(ioctl_dout),
	.ioctl_wait(ldr_wr),

	.ps2_kbd_clk_out(ps2_kbd_clk_out),
	.ps2_kbd_data_out(ps2_kbd_data_out),
	.ps2_kbd_clk_in(ps2_kbd_clk_in),
	.ps2_kbd_data_in(ps2_kbd_data_in),
	.ps2_mouse_clk_out(ps2_mouse_clk_out),
	.ps2_mouse_data_out(ps2_mouse_data_out),
	.ps2_mouse_clk_in(ps2_mouse_clk_in),
	.ps2_mouse_data_in(ps2_mouse_data_in),

	.ps2_key(ps2_key),
	
	.RTC(sysrtc),

	.joystick_0(joystick_0),
	.joystick_1(joystick_1)
);

/////////////////  RESET  /////////////////////////

reg reset_n = 0;
always @(posedge clk_sys) begin
	reg old_download;
	
	old_download <= ioctl_download;
	if(~old_download & ioctl_download) reset_n <= 1;
end

wire reset = buttons[1] | status[6];
///////////////////////////////////////////////////

wire [1:0] basicmode=status[8:7];
wire clkmode=status[9];
wire cBT		=status[10];
wire	c40C	=status[11];
wire	c20L	=status[12];
wire	cDisk	=status[13];
wire	MTSAVE	=1;
wire [1:0]FDsync=status[16:15];

assign CLK_VIDEO = clk_ram;
assign AUDIO_S = 1;

wire disk_led;

wire [7:0] red, green, blue;
wire HBlank, VBlank, HSync, VSync, ce_pix, vid_de;

PC88MiSTer PC88_top
(
	.clk21m(clk_sys),
	.rclk(clk_ram),
	.emuclk(clk_emu),
	.plllocked(pll_locked),
	
	.sysrtc(sysrtc),

	.LOADER_ADR(ioctl_addr[18:0]),
	.LOADER_WDAT(ioctl_dout),
	.LOADER_OE(ioctl_download & ~ldr_done),
	.LOADER_WR(ldr_wr),
	.LOADER_ACK(ldr_ack),
	.LOADER_DONE(ldr_done),

	.pMemCke(SDRAM_CKE),
	.pMemCs_n(SDRAM_nCS),
	.pMemRas_n(SDRAM_nRAS),
	.pMemCas_n(SDRAM_nCAS),
	.pMemWe_n(SDRAM_nWE),
	.pMemUdq(SDRAM_DQMH),
	.pMemLdq(SDRAM_DQML),
	.pMemBa1(SDRAM_BA[1]),
	.pMemBa0(SDRAM_BA[0]),
	.pMemAdr(SDRAM_A),
	.pMemDat(SDRAM_DQ),

	.pPs2Clkin(ps2_kbd_clk_out),
	.pPs2Clkout(ps2_kbd_clk_in),
	.pPs2Datin(ps2_kbd_data_out),
	.pPs2Datout(ps2_kbd_data_in),

	.pPmsClkin(ps2_mouse_clk_out),
	.pPmsClkout(ps2_mouse_clk_in),
	.pPmsDatin(ps2_mouse_data_out),
	.pPmsDatout(ps2_mouse_data_in),

	.pJoyA(joyA),
	.pJoyB(joyB),

	.mist_mounted(img_mounted),
	.mist_readonly(img_readonly),
	.mist_imgsize(img_size),

	.mist_lba(sd_lba),
	.mist_rd(sd_rd),
	.mist_wr(sd_wr),
	.mist_ack({sd_ack[3:2], |sd_ack[1:0], |sd_ack[1:0]}),

	.mist_buffaddr(sd_buff_addr),
	.mist_buffdout(sd_buff_dout),
	.mist_buffdin(sd_buff_din),
	.mist_buffwr(sd_buff_wr),

	.pFd_sync(FDsync),

	.pLed(disk_led),
	.pDip({clkmode,2'b0,CDisk,c20L,c40C,MTSAVE,cBT,basicmode}),
	.pPsw(2'b11),

	.pVideoR(red),
	.pVideoG(green),
	.pVideoB(blue),
	.pVideoHS(HSync),
	.pVideoVS(VSync),
	.pVideoHB(HBlank),
	.pVideoVB(VBlank),
	.pVideoEN(vid_de),
	.pVideoClk(ce_pix),

	.pSndL(AUDIO_L),
	.pSndR(AUDIO_R),

	.rstn(reset_n & ~reset)
);

wire ldr_ack;
reg ldr_wr = 0;
reg ldr_done = 0;
always @(posedge clk_sys) begin
	reg old_ack, old_download;

	old_download <= ioctl_download;
	old_ack <= ldr_ack;

	if(~old_ack & ldr_ack & ldr_wr) ldr_wr <= 0;
	if(ioctl_wr & ~ldr_done) ldr_wr <= 1;

	if(old_download & ~ioctl_download) ldr_done <= 1;
end


//////////////////   SD LED   ///////////////////
reg sd_act;

always @(posedge clk_sys) begin
	reg old_mosi, old_miso;
	integer timeout = 0;

	old_mosi <= SD_MOSI;
	old_miso <= SD_MISO;

	sd_act <= 0;
	if(timeout < 1000000) begin
		timeout <= timeout + 1;
		sd_act <= 1;
	end

	if((old_mosi ^ SD_MOSI) || (old_miso ^ SD_MISO)) timeout <= 0;
end

////////////////////////////  VIDEO  ////////////////////////////////////


assign VGA_SL = sl[1:0];
reg en216p = 0;
always @(posedge CLK_VIDEO) en216p <= ((HDMI_WIDTH == 1920) && (HDMI_HEIGHT == 1080) && !forced_scandoubler && !scale);

wire vga_de;
video_freak video_freak
(
	.*,
	.VGA_DE_IN(vga_de),
	.ARX((!ar) ? 12'd4 : (ar - 1'd1)),
	.ARY((!ar) ? 12'd3 : 12'd0),
	.CROP_SIZE(en216p ? 10'd216 : 10'd0),
	.CROP_OFF(0),
	.SCALE(status[4:3])
);

wire [2:0] scale = status[17:15];
wire [2:0] sl = scale ? scale - 1'd1 : 3'd0;
wire       scandoubler = (scale || forced_scandoubler);

wire freeze = 0;
wire freeze_sync;

video_mixer #(640, 0, 1) mixer
(
	.CLK_VIDEO(CLK_VIDEO),
	
	.hq2x(scale == 1),
	.scandoubler(scale || forced_scandoubler),
	.gamma_bus(gamma_bus),

	.ce_pix(ce_pix),
	.R(red),
	.G(green),
	.B(blue),
	.HSync(HSync),
	.VSync(VSync),
	.HBlank(HBlank),
	.VBlank(VBlank),

	.CE_PIXEL(CE_PIXEL),
	.VGA_R(VGA_R),
	.VGA_G(VGA_G),
	.VGA_B(VGA_B),
	.VGA_VS(VGA_VS),
	.VGA_HS(VGA_HS),
	.VGA_DE(vga_de)
);



endmodule