Issue: In vangelis mixer issue with selecting outputs

[lanmower]

Describe the issue

when trying to change the outputs that a channel plays into it would not change

To Reproduce

Steps to reproduce the behavior:

try to select the outputs of a channel, when clicking or pressing on them they dont change

Expected behaviour

the x appearing and disappearing

Actual behaviour

it not happening

Additional context

reverting to oram allowed these to edit

Configuration

Hardware

Raspberry Pi 5 Model B Rev 1.0
Audio: Generic USB device
Display: Generic HDMI/DSI Display
Wiring: DUMMIES
I2C: Not detected
Profile: 

System

Debian GNU/Linux 12 (bookworm)
Build Date: 2024-10-02
Memory: 15% (1222M/8048M)
SD Card: 42% (24G/59G)
Temperature: 68.1ºC
Overclock: None

MIDI & UI

Tuning: 440.0 Hz
Master Channel: Off
Preload Presets: On
ZS3 (SubSnapShots): On
Power Save: 10 minutes
Audio Levels on Snapshots: On

Software

zyncoder: oram (727b73e) 
zynthian-ui: oram (2ed5a43)
zynthian-sys: oram (d8e0202)
zynthian-data: oram (305b301)
zynthian-webconf: oram (8ec693a)

[riban-bw]

This bug report refers to an issue in vangelis but was reported from a machine running oram. Please provide the software version info (git hash for each repository) in which this issue occurs.

Also, the issue report could be more detailed. I am assuming these are the steps to reproduce:

• Add a synth or audio chain.
• Bold SELECT to access chain options menu.
• Select "Audio Out" option.
• Select "Output 1"

When I do this in vangelis, the output is toggled. There was an issue with this which was fixed about a week ago.

Please retest.