DOC updates

AmokSolderer · Jul 2, 2024 · 53b5bea · 53b5bea
1 parent d4deff9
commit 53b5bea
Show file tree

Hide file tree

Showing 2 changed files with 10 additions and 6 deletions.
diff --git a/DOC/InitialTests.md b/DOC/InitialTests.md
@@ -66,6 +66,8 @@ The APC offers a digital volume setting which let's you adjust the volume in the
 
 ## Using the Test Mode
 
+The following description is about the test mode of the Base Code. That means you have to have 'Base Code' selected in the 'Active Game' setting of the '[System Settings](https://github.com/AmokSolderer/APC/blob/master/DOC/Settings.md#system-settings)' to perform this test.
+
 Press the Advance button with Up/Down being in the down position to enter the test mode of the Base Code.  
 The name of the current test is shown in the Display. For numerical displays the number of the test is shown in the Player 1 display. You can enter the test by pressing the game start button or proceed to the next test by pressing Advance again. The display, coil and single lamp tests are cycling automatically, the corresponding number is shown in the Player 4 display. This cycling can be stopped by the Up/Down button being in Down position.  
 The following table shows the avaiable tests and their number which is shown for numerical displays.
@@ -79,6 +81,8 @@ The following table shows the avaiable tests and their number which is shown for
 | 5 | All Lamps |
 | 6 | Music Test |
 
+Note that the switch test also shows numbers for the special solenoid switches (65 - 70). However, these switches are special and not part of the switch matrix.
+
 ## Next steps
 
 If the tests are completed and your board is working properly you're ready to [run a game](https://github.com/AmokSolderer/APC/blob/master/DOC/RunGame.md)
diff --git a/DOC/Settings.md b/DOC/Settings.md
@@ -18,13 +18,9 @@ Note that the menus have changed since these videos have been made. So use them
 
 ## Using the settings menu
 
-To enter the APC settings you have to press the Advance button at the coin door. If you're in Remote Control mode you have to keep it pressed for more than 1s.
+To enter the APC settings you have to press the Advance button at the coin door with the Up/Down switch in 'up' position. If you're in Remote Control mode you have to keep it pressed for more than 1s.
 
-In settings mode use Advance to select the setting and the Game Start button to change it's value. If the Up/Down button is in down position then you're moving backwards.
-
-If an SD card is present the settings are stored when you choose 'Exit Settings'.
-
-The APC settings are splitted in two parts.
+After that you have to select whether you want to enter the system or game settings.
 
 * The System Settings are valid for all selected active games
 * The Game Settings are game specific. They change depending on which 'Active Game' is selected in the System Settings.
@@ -33,6 +29,10 @@ Games with a credit display show 00 for System Settings and 01 for Game Settings
 
 For pre Sys11 displays all text settings are represented by their item number as shown in the tables. For example, if a pre Sys11 display is selected and the credit display shows 00 01 you have selected the System Settings and the 'Active Game' setting is currently being shown. An early System11 display (upper display row alphanumerical and lower row numerical) will still try to show the name of the currently selected game as a text which is not perfect, but good enough. A pre System11 display will show the item number instead and if there is a 3 stated in the player 4 display then you're in Remote Control mode.
 
+In settings mode use Advance to select the setting and the Game Start button to change it's value. If the Up/Down button is in down position then you're moving backwards.
+
+If an SD card is present the settings are stored when you choose 'Exit Settings'.
+
 ## Using PinMame settings
 
 While you're running PinMame you can adjust the original Williams System 4 - 11 adjustments as usual with one exception: