Alignment workflow

Align Nanopore reads and visualize mapping statistics.

Introduction

This workflow provides an easy way to align Oxford Nanopore reads and gather mapping stats either locally for small amounts of data or at scale in a distributed environment such as a cluster or the cloud.

In brief, it will perform the following:

• Combine all reference files in the directory passed to --references.
• Align input reads (passed as FASTQ or unaligned BAM files) against the reference (Note that BAM files with aligned reads can be used as well; these will skip the alignment step and only stats and the report will be produced).
• Create alignment stats.
• Calculate depth of coverage along the reference sequences (this step can be skipped if requested).
• Create an HTML report to illustrate the results.

Compute requirements

Recommended requirements:

• CPUs = 12
• Memory = 32GB

Minimum requirements:

• CPUs = 6
• Memory = 12GB

Approximate run time: 0.5-5 minutes per sample (depending on number of reads, length of reference, and available compute).

ARM processor support: True

Install and run

These are instructions to install and run the workflow on command line. You can also access the workflow via the EPI2ME application.

The workflow uses Nextflow to manage compute and software resources, therefore Nextflow will need to be installed before attempting to run the workflow.

The workflow can currently be run using either Docker or Singularity to provide isolation of the required software. Both methods are automated out-of-the-box provided either Socker or Singularity is installed. This is controlled by the -profile parameter as exemplified below.

It is not required to clone or download the git repository in order to run the workflow. More information on running EPI2ME workflows can be found on our website.

The following command can be used to obtain the workflow. This will pull the repository in to the assets folder of Nextflow and provide a list of all parameters available for the workflow as well as an example command:

nextflow run epi2me-labs/wf-alignment –help

A demo dataset is provided for testing of the workflow. It can be downloaded using:

wget https://ont-exd-int-s3-euwst1-epi2me-labs.s3.amazonaws.com/wf-alignment/wf-alignment-demo.tar.gz
tar -xzvf wf-alignment-demo.tar.gz

The workflow can be run with the demo data using:

nextflow run epi2me-labs/wf-alignment \
    --fastq wf-alignment-demo/fastq \
    --references wf-alignment-demo/references \
    -profile standard

For further information about running a workflow on the command line see https://labs.epi2me.io/wfquickstart/

Related protocols

This workflow is designed to take input sequences that have been produced from Oxford Nanopore Technologies devices.

Find related protocols in the Nanopore community.

Input example

This workflow accepts either FASTQ or BAM files as input.

The FASTQ or BAM input parameters for this workflow accept one of three cases: (i) the path to a single FASTQ or BAM file; (ii) the path to a top-level directory containing FASTQ or BAM files; (iii) the path to a directory containing one level of sub-directories which in turn contain FASTQ or BAM files. In the first and second cases (i and ii), a sample name can be supplied with --sample. In the last case (iii), the data is assumed to be multiplexed with the names of the sub-directories as barcodes. In this case, a sample sheet can be provided with --sample_sheet.

(i)                     (ii)                 (iii)    
input_reads.fastq   ─── input_directory  ─── input_directory
                        ├── reads0.fastq     ├── barcode01
                        └── reads1.fastq     │   ├── reads0.fastq
                                             │   └── reads1.fastq
                                             ├── barcode02
                                             │   ├── reads0.fastq
                                             │   ├── reads1.fastq
                                             │   └── reads2.fastq
                                             └── barcode03
                                              └── reads0.fastq

Input parameters

Input Options

Nextflow parameter name	Type	Description	Help	Default
fastq	string	FASTQ files to use in the analysis.	This accepts one of three cases: (i) the path to a single FASTQ file; (ii) the path to a top-level directory containing FASTQ files; (iii) the path to a directory containing one level of sub-directories which in turn contain FASTQ files. In the first and second case, a sample name can be supplied with --sample. In the last case, the data is assumed to be multiplexed with the names of the sub-directories as barcodes. In this case, a sample sheet can be provided with --sample_sheet.
bam	string	BAM or unaligned BAM (uBAM) files to use in the analysis.	This accepts one of three cases: (i) the path to a single BAM file; (ii) the path to a top-level directory containing BAM files; (iii) the path to a directory containing one level of sub-directories which in turn contain BAM files. In the first and second case, a sample name can be supplied with --sample. In the last case, the data is assumed to be multiplexed with the names of the sub-directories as barcodes. In this case, a sample sheet can be provided with --sample_sheet.
analyse_unclassified	boolean	Analyse unclassified reads from input directory. By default the workflow will not process reads in the unclassified directory.	If selected and if the input is a multiplex directory the workflow will also process the unclassified directory.	False
references	string	Path to a directory containing FASTA reference files.	Accepted file extensions are '.fasta', '.fna', '.ffn', '.faa', '.frn', '.fa', '.txt', '.fa.gz', '.fna.gz', '.frn.gz', '.ffn.gz', '.fasta.gz'. In addition, an MMI index file can be provided to make the workflow run faster using the option --reference_mmi_file.
reference_mmi_file	string	Path to an MMI index file to be used as reference.	Accepted file extension is '.mmi'. The references parameter is still required if this is provided. Note that some minimap2 alignment options are set by the reference MMI and cannot be overridden.
counts	string	Path to a CSV file containing expected counts as a control.	The expected counts CSV file must contain columns named 'reference' and 'expected_counts' in order to be valid. the 'reference' column should contain names matching the names of reference sequences within the fasta files provided using --references.

Sample Options

Nextflow parameter name	Type	Description	Help	Default
sample_sheet	string	A CSV file used to map barcodes to sample aliases. The sample sheet can be provided when the input data is a directory containing sub-directories with FASTQ files.	The sample sheet is a CSV file with, minimally, columns named barcode and alias. Extra columns are allowed. A type column is required for certain workflows and should have the following values; test_sample, positive_control, negative_control, no_template_control.
sample	string	A single sample name for non-multiplexed data. Permissible if passing a single .fastq(.gz) file or directory of .fastq(.gz) files.

Output Options

Nextflow parameter name	Type	Description	Help	Default
out_dir	string	Directory for output of all workflow results.		output
prefix	string	Optional prefix attached to each of the output filenames.	Output filename format will be <prefix>-filename.ext.

Advanced options

Nextflow parameter name	Type	Description	Help	Default
depth_coverage	boolean	Calculate depth coverage statistics and include them in the report.	This step can be a computational bottleneck. Set this to false if your reference sequences are >50mb to speed things up.	True
minimap_preset	string	Pre-defined parameter sets for minimap2, covering most common use cases.	Available parameter sets are: 'dna' (-ax map-ont), 'rna' (-ax splice -uf).	dna
minimap_args	string	String of command line arguments to be passed on to minimap2.	This overrides the options defined by --minimap_preset and allows for running the alignment step in a more customized way.

Miscellaneous Options

Nextflow parameter name	Type	Description	Help	Default
threads	integer	Number of CPU threads to use for the alignment step.	The alignment process will run with this many threads (note that the memory used by minimap2 scales with the number of threads). The total CPU resources used by the workflow are constrained by the executor configuration and can be modified by changing nextflow.config or supplying an additional config file.	4
disable_ping	boolean	Enable to prevent sending a workflow ping.		False

Outputs

Output files may be aggregated including information for all samples or provided per sample. Per-sample files will be prefixed with respective aliases and represented below as {{ alias }}.

Title	File path	Description	Per sample or aggregated
workflow report	./wf-alignment-report.html	Report for all samples	aggregated
Combined references	./combined-refs.fasta	FASTA file containing all input references.	aggregated
Combined references index	./combined-refs.fasta.fai	Index file for combined references FASTA.	aggregated
Combined references MMI index	./combined-refs.mmi	Minimap2 index file for combined references FASTA.	aggregated
Per-read alignment stats	./{{ alias }}.readstats.tsv	Bamstats per-read output TSV file.	per-sample
Per-reference alignment stats	./{{ alias }}.flagstat.tsv	Bamstats flagstat output TSV file.	per-sample
Alignments BAM file	./{{ alias }}.sorted.aligned.bam	BAM file with alignments of filtered input reads against the combined references.	per-sample
Alignments index file	./{{ alias }}.sorted.aligned.bam.bai	Index for alignments BAM file.	per-sample

Pipeline overview

1. Combine reference files

All reference files in the directory passed to --references are concatenated.

2. Align reads

Input reads are aligned against the combined reference with Minimap2. If BAM files are used as input (with --bam), only reads in files without a reference in the SAM header are aligned. For other BAM files this step is skipped.

3. Create alignment stats

Bamstats is used to create per-read and per-reference alignment stats from the BAM files.

4. Calculate depth of coverage

Depth of coverage along the reference sequences is determined with Mosdepth (using 200 windows per reference sequence). To speed up the workflow, this step can be skipped by adding --depth-coverage false.

Troubleshooting

• If the workflow fails please run it with the demo data set to ensure the workflow itself is working. This will help us determine if the issue is related to the environment, input parameters or a bug.
• Please see here for how to resolve some common Nextflow issues and here for how to interpret command exit codes.

FAQ's

I cannot select a single reference file in the EPI2ME desktop app. - When running the workflow via the desktop app, you need to provide a directory with reference files. If you only have a single file, you can create a directory to place your reference file inside and select this with the reference input option.

How are the values in the acc column (and other metrics) in the per-read output stats calculated? - For details on the per-read stats output files, please refer to the fastcat/bamstats documentation.

If your question is not answered here, please report any issues or suggestions on the github issues page or start a discussion on the community.

Related blog posts

• How to align your data

See the EPI2ME website for lots of other resources and blog posts.