dev_1_0_2

This version adds the following features (compared to dev_1_0_1)

• adde tap feedback: screen blinks and motor vibrates
• added option (default is true) to power M5Core2 via 5V rail (typical scenario for intended purse: to mount the unit in 55mm frame with small PSU at the back of M5 Bottom base or proto pcb (corner holes exactly match the bolts from plastic electrical box/cans in Europe - at least those used for drywalls). Default option can be changed in config.json with "powerFrom5vRailNotUsb": false,

binaries can be loaded with or without overwriting the spiffs partition in the following way. Caution: the ./homepoint_m5stackcore2_full_dev_1_0_2.bin binary will overwrite the whole device.

$ cat ./upload_full.sh
#!/bin/bash
sudo esptool -b 921600 write_flash -fs 4MB -fm dout -z 0x0 ./homepoint_m5stackcore2_full_dev_1_0_2.bin
minicom -b 115200 -D /dev/ttyUSB0

$ cat ./upload_app.sh
#!/bin/bash
sudo esptool -b 921600 write_flash -fs 4MB -fm dout -z 0x10000 ./homepoint_dev_1_0_2.bin
minicom -b 115200 -D /dev/ttyUSB0

dev_1_0_1

Fixed screen saver that does not require ntp time synchronized.
Screen saver turns off back light and power led.
Screen saver activates power save feature for wifi.

dev_1_0_0

Full Changelog: v0.07.2...dev_1_0_0