DMRconfig is a utility for programming digital radios via USB programming cable. Supported radios:

• TYT MD-380, Retevis RT3, RT8
• TYT MD-390
• TYT MD-2017, Retevis RT82
• TYT MD-UV380
• TYT MD-UV390, Retevis RT3S
• TYT MD-9600
• Baofeng DM-1701, Retevis RT84
• Baofeng RD-5R, TD-5R
• Baofeng DM-1801
• Radioddity GD-77
• Anytone AT-D868UV
• Anytone AT-D878UV
• BTECH DMR-6x2
• Zastone D900
• Zastone DP880
• Radtel RT-27D

Usage

Read codeplug from the radio and save it to file 'device.img', and also save text configuration to 'device.conf':

dmrconfig -r [-t]

Write codeplug to the radio:

dmrconfig -w [-t] file.img

Configure the radio from text file. Previous codeplug is saved to 'backup.img':

dmrconfig -c [-t] file.conf

Show configuration from the codeplug file:

dmrconfig file.img

Apply configuration from text file to the codeplug file:

dmrconfig -c file.img file.conf

Update database of contacts from CSV file:

dmrconfig -u [-t] file.csv

Option -t enables tracing of USB protocol.

Permissions

On Linux, a permission to access USB device is required. It's possible to run dmrconfig as root, like "sudo dmrconfig", but it's safer to enable access for users. Create a file /etc/udev/rules.d/99-dmr.rules with the following contents:

# TYT MD-UV380
SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="666"

# Baofeng RD-5R, TD-5R, DM-1801
SUBSYSTEM=="usb", ATTRS{idVendor}=="15a2", ATTRS{idProduct}=="0073", MODE="666"

# Anytone AT-D868UV: ignore this device in Modem Manager
ATTRS{idVendor}=="28e9" ATTRS{idProduct}=="018a", ENV{ID_MM_DEVICE_IGNORE}="1"

To activate it, run:

sudo udevadm control --reload-rules

Then re-attach the USB cable to the radio.

Sources

Sources are distributed freely under the terms of Apache 2.0 license. You can download sources via GIT:

git clone https://github.com/sergev/dmrconfig

To build on Linux or Mac OS X, run:

make
make install

Regards, Serge Vakulenko KK6ABQ