PIVT +

What is this?
License
Requirements
Network Architecture
Go over the samples
Configuration
TLS
Backup-Restore
- Requirements
- Flow
- Backup
- Restore
Limitations
FAQ and more
Conclusion

What is this?

PIVT + is a fork and extention of the original PIVT project by APGGroeiFabriek.

The original PIVT project was aimed to make it easy to deploy Fabric networks on Kubernetes, using Argo Workflow CRD's and Helm's powerful templating capabilities. It makes it super easy to do things like:

Configure and launch the whole HL Fabric network, either:
- A simple one, one peer per organization and Solo orderer
- Or scaled up one, multiple peers per organization and Kafka or Raft orderer
Populate the network declaratively:
- Create the channels, join peers to channels, update channels for Anchor peers
- Install/Instantiate all chaincodes, or some of them, or upgrade them to newer version
Add new peer organizations to an already running network declaratively
Backup and restore the state of whole network

PIVT + extends this framework by enabling the deployment of sample applications and one-click monitoring. PIVT+'s goal is to build around the core ideology of PIVT tool for deploying Fabric networks to a more fully featured ecosystem for fast and easy development on Hyperledger.

IMPORTANT: Declarative flows use our home built CLI tools based on this patch, use at your own risk! If you don't want this behaviour, you can use release/0.7 branch.

License

This work is licensed under the same license with HL Fabric; Apache License 2.0.

Requirements

A running Kubernetes cluster, Minikube should also work, but not tested
HL Fabric binaries
Helm, developed with 2.11, newer 2.xx versions should also work
jq 1.5+ and yq 2.6+
Argo, both CLI and Controller
Minio, only required for backup/restore and new-peer-org flows
Run all the commands in fabric-kube folder
AWS EKS users please also apply this fix

Network Architecture

Simple Network Architecture

Scaled Up Kafka Network Architecture

Scaled Up Raft Network Architecture

Note: Due to TLS, transparent load balancing is not possible with Raft orderer as of Fabric 1.4.2.

Go Over Samples

Launching The Network

First install chart dependencies, you need to do this only once:

helm repo add kafka http://storage.googleapis.com/kubernetes-charts-incubator
helm dependency update ./hlf-kube/

Then create necessary stuff:

./init.sh ./samples/simple/ ./samples/chaincode/

This script:

Creates the Genesis block using genesisProfile defined in network.yaml file in the project folder
Creates crypto material using cryptogen based on crypto-config.yaml file in the project folder
Compresses chaincodes as tar archives via prepare_chaincodes.sh script
Copies created stuff and configtx.yaml into main chart folder: hlf-kube

Now, we are ready to launch the network:

helm install ./hlf-kube --name hlf-kube -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml

This chart creates all the above mentioned secrets, pods, services, etc. cross configures them and launches the network in unpopulated state.

Wait for all pods are up and running:

kubectl get pod --watch

In a few seconds, pods will come up: Congrulations you have a running HL Fabric network in Kubernetes!

Creating channels

Next lets create channels, join peers to channels and update channels for Anchor peers:

helm template channel-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml | argo submit - --watch

Wait for the flow to complete, finally you will see something like this:

Channel flow is declarative and idempotent. You can run it many times. It will create the channel only if it doesn't exist, join peers to channels only if they didn't join yet, etc.

Installing chaincodes

Next lets install/instantiate/invoke chaincodes

helm template chaincode-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml | argo submit - --watch

Wait for the flow to complete, finally you will see something like this:

Install steps may fail even many times, nevermind about it, it's a known Fabric bug, the flow will retry it and eventually succeed.

Lets assume you had updated chaincodes and want to upgrade them in the Fabric network. Firt update chaincode tar archives:

./prepare_chaincodes.sh ./samples/simple/ ./samples/chaincode/

Then make sure chaincode ConfigMaps are updated with new chaincode tar archives:

helm upgrade hlf-kube ./hlf-kube -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml

Or alternatively you can update chaincode ConfigMaps directly:

helm template -f samples/simple/network.yaml -x templates/chaincode-configmap.yaml ./hlf-kube/ | kubectl apply -f -

Next invoke chaincode flow again:

helm template chaincode-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml --set chaincode.version=2.0 | argo submit - --watch

All chaincodes are upgraded to version 2.0!

Lets upgrade only the chaincode named very-simple to version 3.0:

helm template chaincode-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml --set chaincode.version=3.0 --set flow.chaincode.include={very-simple} | argo submit - --watch

Chaincode very-simple is upgarded to version 3.0!

Alternatively, you can also set chaincode versions individually via network.chaincodes[].version

Chaincode flow is declarative and idempotent. You can run it many times. It will install chaincodes only if not installed, instatiate them only if not instantiated yet, etc.

Launching an application

You may want to deploy an application that can plug into your Hyperledger Fabric network to interact with chaincodes.

For this example, we'll use the latest example from the Fabric Docs, "Commercial Paper". The link to the walkthrough documentation using docker-compose can be found here, give it a read so you have an idea what's going on: https://hyperledger-fabric.readthedocs.io/en/release-1.4/tutorial/commercial_paper.html#digibank-applications.

A cause of confusion with trying to generalize the Hyperledger Fabric examples is that they have many built in assumptions- about environment variables, network configuration, and the tools you are using. One of my goals is to make this process as agnostic to specifications as possible, making it easier to get up and running on any infra or network.

Quick look at the fs:

PIVT/fabric-kube/app-flow: A Helm chart for deploying Fabric applications on Kubernetes.

PIVT/fabric-kube/samples/<your-network>: contains network configuration files (ie; network.yaml, crypto-config)
- PIVT/fabric-kube/samples/application/gateway: you may need to edit/customize your gateway.yaml file. this is used by application to communicate with network. For basic sample, you should be good to go. This will probably be automated soon.
PIVT/fabric-kube/samples/application/<x-chain-code>/<x-applications>

Quickstart:

Go to fabric-kube directory.

Tar gzip our application codes so we can install them into map.

Run sh prepare_appcodes.sh samples/simple/ samples/application/comm-paper/

Copy over some network details our app will need. 2. cp samples/application/gateway/simple-network-sample.yaml samples/simple/connection-profile.yaml

Install some config maps....

application code: helm template app-flow/ -x templates/appcode-configmap.yaml -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml | kubectl apply -f -
network gateway: helm template app-flow/ -x templates/network-configmap.yaml -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml | kubectl apply -f -

Your config maps should now look something like this:

gWOLF3 fabric-kube$ kubectl get configmaps
NAME                          DATA   AGE
hlf-appcode--digibank         0      29h
hlf-appcode--magnetocorp      0      29h
hlf-chaincode--comm-paper     0      3d8h
hlf-chaincode--even-simpler   0      3d8h
hlf-chaincode--very-simple    0      3d8h
hlf-netconfig--comm-paper     0      29h
hlf-scripts                   4      3d8h

Deploy your application pod. (see gwolf3/node-lts-alpine-plus) 5. helm template app-flow/ -x templates/appcode-configmap.yaml -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml | kubectl apply -f -

If everything went well, run kubectl get pods -A. You should now see a sample-deployment pod.

Lets exec into it to get started. Run kubectl exec -it <sample-pod-name> sh

Let's get things setup first. (TODO: this will be automated)

tar -xvf chaincodes/comm-paper.tar -C /mnt/
tar -xvf application/magnetocorp/magnetocorp.tar  -C /mnt/
tar -xvf application/digibank/digibank.tar -C /mnt/
tar -xvf gateway/netconfig.tar -C /mnt/

Great. Now were set to go. Let's do some NPM magic.

We'll start with the magnetocorp application, because we want to issue some paper.

Setup: cd /mnt/magnetocorp && npm install

Create wallet: node addToWallet.js Sample output:

Issue some paper: node issue.js Sample Output:

Connect to Fabric gateway.
Use network channel: private-karga-atlantis.
Use org.papernet.commercialpaper smart contract.
Submit commercial paper issue transaction.
Process issue transaction response.
MagnetoCorp commercial paper : 00001 successfully issued for value 5000000
Transaction complete.
Disconnect from Fabric gateway.
Issue program complete.

Ok great, at this point we have some paper. So let's now buy some. (For purposes of example, we'll stay in the same container)

Setup: cd /mnt/digibank && npm install

Create Wallet: node addToWallet.js Sample Output:

credPath /mnt/crypto-config/peerOrganizations/atlantis.com/users/[email protected]
done

Buy some paper: node buy.js Sample Output:

Connect to Fabric gateway.
Use network channel: private-karga-atlantis
Use org.papernet.commercialpaper smart contract.
Submit commercial paper buy transaction.
Process buy transaction response.
MagnetoCorp commercial paper : 00001 successfully purchased by DigiBank
Transaction complete.
Disconnect from Fabric gateway.
Buy program complete.

Redeem that paper: node redeem.js Sample Output:

Connect to Fabric gateway.
Use network channel: private-karga-atlantis.
Use org.papernet.commercialpaper smart contract.
Submit commercial paper redeem transaction.
Process redeem transaction response.
MagnetoCorp commercial paper : 00001 successfully redeemed with MagnetoCorp
Transaction complete.
Disconnect from Fabric gateway.
Redeem program complete.

And there you go! Congradulations, you've just moved around some imaginary paper on a sample Fabric blockchain network!

Scaled-up Kafka network

Now, lets launch a scaled up network backed by a Kafka cluster.

First tear down everything:

argo delete --all
helm delete hlf-kube --purge

Wait a bit until all pods are terminated:

kubectl  get pod --watch

Then create necessary stuff:

./init.sh ./samples/scaled-kafka/ ./samples/chaincode/

Lets launch our scaled up Fabric network:

helm install ./hlf-kube --name hlf-kube -f samples/scaled-kafka/network.yaml -f samples/scaled-kafka/crypto-config.yaml -f samples/scaled-kafka/values.yaml

Again lets wait for all pods are up and running:

kubectl get pod --watch

This time, in particular wait for 4 Kafka pods and 3 ZooKeeper pods are running and ready count is 1/1. Kafka pods may crash and restart a couple of times, this is normal as ZooKeeper pods are not ready yet, but eventually they will all come up.

Congrulations you have a running scaled up HL Fabric network in Kubernetes, with 3 Orderer nodes backed by a Kafka cluster and 2 peers per organization. Your application can use them without even noticing there are 3 Orderer nodes and 2 peers per organization.

Lets create the channels:

helm template channel-flow/ -f samples/scaled-kafka/network.yaml -f samples/scaled-kafka/crypto-config.yaml | argo submit - --watch

And install chaincodes:

helm template chaincode-flow/ -f samples/scaled-kafka/network.yaml -f samples/scaled-kafka/crypto-config.yaml | argo submit - --watch

Scaled-up Raft network

Now, lets launch a scaled up network based on three Raft orderer nodes spanning two Orderer organizations. This sample also demonstrates how to enable TLS and use actual domain names for peers and orderers instead of internal Kubernetes service names. Enabling TLS globally is mandatory as of Fabric 1.4.2. This is resolved but not released yet.

For TLS, we need hostAliases support in Argo workflows and also in Argo CLI, which is implemented but not released yet. You can install Argo controller from Argo repo with the below command. We have built Argo CLI binary from Argo repo for Linux which can be downloaded from here. Use at your own risk!

kubectl apply -n argo -f https://raw.githubusercontent.com/argoproj/argo/master/manifests/install.yaml

Compare scaled-raft-tls/configtx.yaml with other samples, in particular it uses actual domain names like peer0.atlantis.com instead of internal Kubernetes service names like hlf-peer--atlantis--peer0. This is necessary for enabling TLS since otherwise TLS certificates won't match service names.

Also in network.yaml file, there are two additional settings. As we pass this file to all Helm charts, it's convenient to put these settings into this file.

tlsEnabled: true
useActualDomains: true

First tear down everything:

argo delete --all
helm delete hlf-kube --purge

Wait a bit until all pods are terminated:

kubectl  get pod --watch

Then create necessary stuff:

./init.sh ./samples/scaled-raft-tls/ ./samples/chaincode/

Lets launch our Raft based Fabric network in broken state:

helm install ./hlf-kube --name hlf-kube -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml

The pods will start but they cannot communicate to each other since domain names are unknown. You might also want to use the option --set peer.launchPods=false --set orderer.launchPods=false to make this process faster.

Run this command to collect the host aliases:

kubectl get svc -l addToHostAliases=true -o jsonpath='{"hostAliases:\n"}{range..items[*]}- ip: {.spec.clusterIP}{"\n"}  hostnames: [{.metadata.labels.fqdn}]{"\n"}{end}' > samples/scaled-raft-tls/hostAliases.yaml

Or this one, which is much convenient:

./collect_host_aliases.sh ./samples/scaled-raft-tls/

Let's check the created hostAliases.yaml file.

cat samples/scaled-raft-tls/hostAliases.yaml

The output will be something like:

hostAliases:
- ip: 10.0.110.93
  hostnames: [orderer0.groeifabriek.nl]
- ip: 10.0.32.65
  hostnames: [orderer1.groeifabriek.nl]
- ip: 10.0.13.191
  hostnames: [orderer0.pivt.nl]
- ip: 10.0.88.5
  hostnames: [peer0.atlantis.com]
- ip: 10.0.88.151
  hostnames: [peer1.atlantis.com]
- ip: 10.0.217.95
  hostnames: [peer10.aptalkarga.tr]
- ip: 10.0.252.19
  hostnames: [peer9.aptalkarga.tr]
- ip: 10.0.64.145
  hostnames: [peer0.nevergreen.nl]
- ip: 10.0.15.9
  hostnames: [peer1.nevergreen.nl]

The IPs are internal ClusterIPs of related services. Important point here is, as opposed to pod ClusterIPs, service ClusterIPs are stable, they won't change if service is not deleted and re-created.

Next, let's update the network with this host aliases information. These entries goes into pods' /etc/hosts file via Pod hostAliases spec.

helm upgrade hlf-kube ./hlf-kube -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/hostAliases.yaml

Again lets wait for all pods are up and running:

kubectl get pod --watch

Congrulations you have a running scaled up HL Fabric network in Kubernetes, with 3 Raft orderer nodes spanning 2 Orderer organizations and 2 peers per organization. But unfortunately, due to TLS, your application cannot use them with transparent load balancing, you need to connect to relevant peer and orderer services separately.

Lets create the channels:

helm template channel-flow/ -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/hostAliases.yaml | argo submit - --watch

And install chaincodes:

helm template chaincode-flow/ -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/hostAliases.yaml | argo submit - --watch

Adding new peer organizations

Simple network

First tear down and re-launch and populate the simple network as described in launching the network, creating channels and installing chaincodes.

At this point we can update the original configtx.yaml, crypto-config.yaml and network.yaml for the new organizations. First take backup of the originals:

rm -rf tmp && mkdir -p tmp && cp samples/simple/configtx.yaml samples/simple/crypto-config.yaml samples/simple/network.yaml tmp/

Then override with extended ones:

cp samples/simple/extended/* samples/simple/ && cp samples/simple/configtx.yaml hlf-kube/

Let's create the necessary stuff:

./extend.sh samples/simple

This script basically performs a cryptogen extend command to create missing crypto material.

Then update the network for new crypto material and configtx and launch the new peers:

helm upgrade hlf-kube ./hlf-kube -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml

Then lets create new peer organizations:

helm template peer-org-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml -f samples/simple/configtx.yaml | argo submit - --watch

This flow:

Parses consortiums from configtx.yaml using genesisProfile defined in network.yaml
Adds missing organizations to consortiums
Adds missing organizations to existing channels as defined in network.yaml
Emits an error for non-existing consortiums
Skips non-existing channels (they will be created by channel flow later)

When the flow completes the output will be something like this:

By default, peer org flow updates all existing channels and consortiums as necessary. You can limit this behaviour by setting flow.channel.include and flow.consortium.include variables respectively.

At this point make sure new peer pods are up and running. Then run the channel flow to create new channels and populate existing ones regarding the new organizations:

helm template channel-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml | argo submit - --watch

Finally run the chaincode flow to populate the chaincodes regarding new organizations:

helm template chaincode-flow/ -f samples/simple/network.yaml -f samples/simple/crypto-config.yaml --set chaincode.version=2.0 | argo submit - --watch

Please note, we increased the chaincode version. This is required to upgrade the chaincodes with new policies. Otherwise, new peers' endorsements will fail.

Peer org flow is declarative and idempotent. You can run it many times. It will add peer organizations to consortiums only if they are not already in consortiums, add peer organizations to channels only if not already in channels.

Restore the original files

cp tmp/configtx.yaml tmp/crypto-config.yaml tmp/network.yaml samples/simple/

Raft orderer network

Adding new peer organizations to a network which utilizes Raft orderer is similar. But there is one point to be aware of: After adding new organizations we need to update the rest of the network with new host aliases information. This means existing pods will be restarted and will lose all the data. That's why persistence should be enabled.

First tear down and re-launch and populate the Raft network as described in scaled-up-raft-network but pass the following additional flag: -f samples/scaled-raft-tls/persistence.yaml

At this point we can update the original configtx.yaml, crypto-config.yaml and network.yaml for the new organizations. First take backup of the originals:

rm -rf tmp && mkdir -p tmp && cp samples/scaled-raft-tls/configtx.yaml samples/scaled-raft-tls/crypto-config.yaml samples/scaled-raft-tls/network.yaml tmp/

Then override with extended ones:

cp samples/scaled-raft-tls/extended/* samples/scaled-raft-tls/ && cp samples/scaled-raft-tls/configtx.yaml hlf-kube/

Create new crypto material:

./extend.sh samples/scaled-raft-tls

Update the network for new crypto material and configtx and launch new peers

helm upgrade hlf-kube ./hlf-kube -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/persistence.yaml -f samples/scaled-raft-tls/hostAliases.yaml

Collect extended host aliases:

./collect_host_aliases.sh ./samples/scaled-raft-tls/

Upgrade host aliases in pods and wait for all pods are up and running:

helm upgrade hlf-kube ./hlf-kube -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/hostAliases.yaml -f samples/scaled-raft-tls/persistence.yaml
kubectl  get pod --watch

Let's create the new peer organizations:

helm template peer-org-flow/ -f samples/scaled-raft-tls/configtx.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/hostAliases.yaml | argo submit - --watch

Then run the channel flow to create new channels and populate existing ones regarding the new organizations:

helm template channel-flow/ -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/hostAliases.yaml | argo submit - --watch

Finally run the chaincode flow to populate the chaincodes regarding new organizations:

helm template chaincode-flow/ -f samples/scaled-raft-tls/network.yaml -f samples/scaled-raft-tls/crypto-config.yaml -f samples/scaled-raft-tls/hostAliases.yaml --set chaincode.version=2.0 | argo submit - --watch

Please note, we increased the chaincode version. This is required to upgrade the chaincodes with new policies. Otherwise, new peers' endorsements will fail.

Restore original files

cp tmp/configtx.yaml tmp/crypto-config.yaml tmp/network.yaml samples/scaled-raft-tls/

Adding new peers to organizations

Update the Template.Count value for relevant PeerOrgs in crypto-config.yaml and run the sequence in adding new peer organizations.

No need to run peer-org-flow in this case as peer organizations didn't change. But running it won't hurt anyway, remember it's idempotent ;)

Configuration

There are basically 2 configuration files: crypto-config.yaml and network.yaml.

crypto-config.yaml

This is Fabric's native configuration for cryptogen tool. We use it to define the network architecture. We honour OrdererOrgs, PeerOrgs, Template.Count at PeerOrgs (peer count) and Specs.Hostname[] at OrdererOrgs.

OrdererOrgs:
  - Name: Groeifabriek
    Domain: groeifabriek.nl
    Specs:
      - Hostname: orderer
PeerOrgs:
  - Name: Karga
    Domain: aptalkarga.tr
    EnableNodeOUs: true
    Template:
      Count: 1
    Users:
      Count: 1
  - Name: Nevergreen
    Domain: nevergreen.nl
    EnableNodeOUs: true
    Template:
      Count: 1
    Users:
      Count: 1

network.yaml

This file defines how network is populated regarding channels and chaincodes.

network:
  # used by init script to create genesis block and by peer-org-flow to parse consortiums
  genesisProfile: OrdererGenesis
  # used by init script to create genesis block 
  systemChannelID: testchainid

  # defines which organizations will join to which channels
  channels:
    - name: common
      # all peers in these organizations will join the channel
      orgs: [Karga, Nevergreen, Atlantis]
    - name: private-karga-atlantis
      # all peers in these organizations will join the channel
      orgs: [Karga, Atlantis]

  # defines which chaincodes will be installed to which organizations
  chaincodes:
    - name: very-simple
      # if defined, this will override the global chaincode.version value
      version: # "2.0" 
      # chaincode will be installed to all peers in these organizations
      orgs: [Karga, Nevergreen, Atlantis]
      # at which channels are we instantiating/upgrading chaincode?
      channels:
      - name: common
        # chaincode will be instantiated/upgraded using the first peer in the first organization
        # chaincode will be invoked on all peers in these organizations
        orgs: [Karga, Nevergreen, Atlantis]
        policy: OR('KargaMSP.member','NevergreenMSP.member','AtlantisMSP.member')
        
    - name: even-simpler
      orgs: [Karga, Atlantis]
      channels:
      - name: private-karga-atlantis
        orgs: [Karga, Atlantis]
        policy: OR('KargaMSP.member','AtlantisMSP.member')

For chart specific configuration, please refer to the comments in the relevant values.yaml files.

TLS

Using TLS is a two step process. We first launch the network in broken state, then collect ClusterIPs of services and attach them to pods as DNS entries using pod hostAliases spec.

Important point here is, as opposed to pod ClusterIPs, service ClusterIPs are stable, they won't change if service is not deleted and re-created.

Backup-Restore

Backup Restore Requirements

Persistence should be enabled in relevant components (Orderer, Peer, CouchDB)
Configure Argo for some artifact repository. Easiest way is to install Minio
An Azure Blob Storage account with a container named hlf-backup (configurable). ATM, backups can only be stored at Azure Blob Storage but it's quite easy to extend backup/restore flows for other mediums, like AWS S3. See bottom of backup-workflow.yaml

IMPORTANT: Backup flow does not backup contents of Kafka cluster, if you are using Kafka orderer you need to manually back it up. In particular, Kafka Orderer with some state cannot handle a fresh Kafka installation, see this Jira ticket, hopefully Fabric guys will fix this soon.

Backup Restore Flow

First lets create a persistent network:

./init.sh ./samples/simple-persistent/ ./samples/chaincode/
helm install --name hlf-kube -f samples/simple-persistent/network.yaml -f samples/simple-persistent/crypto-config.yaml -f samples/simple-persistent/values.yaml ./hlf-kube

Again lets wait for all pods are up and running, this may take a bit longer due to provisioning of disks.

kubectl  get pod --watch

Then populate the network, you know how to do it :)

Backup

Start backup procedure and wait for pods to be terminated and re-launched with Rsync containers.

helm upgrade hlf-kube --set backup.enabled=true -f samples/simple-persistent/network.yaml -f samples/simple-persistent/crypto-config.yaml -f samples/simple-persistent/values.yaml  ./hlf-kube
kubectl  get pod --watch

Then take backup:

helm template -f samples/simple-persistent/crypto-config.yaml --set backup.target.azureBlobStorage.accountName=<your account name> --set backup.target.azureBlobStorage.accessKey=<your access key> backup-flow/ | argo submit  -  --watch

This will create a folder with default backup.key (html formatted date yyyy-mm-dd), in Azure Blob Storage and hierarchically store backed up contents there.

Finally go back to normal operation:

helm upgrade hlf-kube -f samples/simple-persistent/network.yaml -f samples/simple-persistent/crypto-config.yaml -f samples/simple-persistent/values.yaml ./hlf-kube
kubectl  get pod --watch

Restore

Start restore procedure and wait for pods to be terminated and re-launched with Rsync containers.

helm upgrade hlf-kube --set restore.enabled=true -f samples/simple-persistent/network.yaml -f samples/simple-persistent/crypto-config.yaml -f samples/simple-persistent/values.yaml ./hlf-kube
kubectl  get pod --watch

Then restore from backup:

helm template --set backup.key='<backup key>' -f samples/simple-persistent/crypto-config.yaml --set backup.target.azureBlobStorage.accountName=<your account name> --set backup.target.azureBlobStorage.accessKey=<your access key> restore-flow/  | argo submit  -  --watch

Finally go back to normal operation:

helm upgrade hlf-kube -f samples/simple-persistent/network.yaml -f samples/simple-persistent/crypto-config.yaml -f samples/simple-persistent/values.yaml ./hlf-kube
kubectl  get pod --watch

Limitations

TLS

Transparent load balancing is not possible with TLS as of Fabric 1.4.2. So, instead of Peer-Org, Orderer-Org or Orderer-LB services, you need to connect to individual Peer and Orderer services.

Multiple Fabric networks in the same Kubernetes cluster

This is possible but they should be run in different namespaces. We do not use Helm release name in names of components, so if multiple instances of Fabric network is running in the same namespace, names will conflict.

FAQ and more

Please see FAQ page for further details. Also this post at Accenture's open source blog provides some additional information like motivation, how it works, benefits regarding NFR's, etc.

Conclusion

So happy BlockChaining in Kubernetes :)

And don't forget the first rule of BlockChain club:

"Do not use BlockChain unless absolutely necessary!"

Hakan Eryargi (r a f t)

Name		Name	Last commit message	Last commit date
Latest commit History 82 Commits
etc-charts		etc-charts
fabric-kube		fabric-kube
.nojekyll		.nojekyll
FAQ.md		FAQ.md
LICENSE		LICENSE
PIVT.png		PIVT.png
README.md		README.md
_config.yml		_config.yml
_coverpage.md		_coverpage.md
index.html		index.html
nodes.gif		nodes.gif
style.css		style.css

License

chain-gang/PIVT

Folders and files

Latest commit

History

Repository files navigation

PIVT +

Simple Network Architecture

Scaled Up Kafka Network Architecture

Scaled Up Raft Network Architecture

Simple network

Raft orderer network

crypto-config.yaml

network.yaml

Backup

TLS

Multiple Fabric networks in the same Kubernetes cluster

About

Resources

License

Stars

Watchers

Forks

Languages