Xilinx Zynq Ultrascale+ MPSoC Series Development Board AXU7EV

Introduction to Development Board

The entire structure of the development board is designed based on our consistent core board+extension board pattern. Core board and expansion board High speed inter board connectors are used for connection. The backplane expands a variety of peripheral interfaces for the core board, including one FMC HPC, one M.2 SSD interface, and one Road mini_ DP interface, 1 USB 3.0 interface, 2 Gigabit Ethernet interfaces, 1 FMC HPC interface, 1 40 Pin interface, 2-way UART interface, 1-way PCIEX8 gold finger, 1 EEPROM, 1 temperature sensor, and some buttons LED。

Key Features

1. One PCIe 3.0 x8 (pl) with a rate of 8Gbps
2. 1-way M.2 interface, PCIEx1 (ps), speed 6Gbps
3. 1-channel DP output interface, mini DP (ps), maximum support 4kx2k@30fps Output
4. 1-way USB 3.0 interface, USB (ps), speed 5.0Gbps, flat USB interface (USB Type A)
5. 2-way Gigabit Ethernet interface, jl2121, 1-way ps, 1-way pl, rgmii interface
6. Two uart to usb interfaces, one ps terminal and one pl terminal
7. 1 Micro SD card holder (ps)
8. 1 FMC HPC expansion port
9. One 40-pin expansion port, 2.54mm spacing, one 5v, two 3.3v, three gnd, and 34 IO ports. The IO level standard of the expansion port is 3.3V
10. EEPROM and temperature sensor, one EEROM 4Kbit (2x256x8bit) (ps), one LM75 temperature chip (ps), with an accuracy of 0.5 degrees
11. Three LED lights, one Done light, one power supply, one PL control, and one PS control
12. Three buttons, one reset button RESET, and two user buttons
13. One 4-digit dial switch, and the board supports multiple startup modes
14. Size 222mm x 98.4mm
15. Power supply 12v/3A