Skip to content

Programmer Guide Index

Simeon Andreev edited this page Feb 17, 2023 · 1 revision

⚠️ THIS TOPIC CONTAINS OUTDATED INFORMATION ⚠️
The new index was first disabled with bug 515496 and then removed with bug 572978.

JDT core contains two indices.

The legacy index mainly contains mappings of symbol names onto jar files. The new index contains a complete model of the code, in sufficient detail that the java model can be created without accessing the original class files.

The new index is intended to completely replace the legacy index, but at the time of this writing (4.7) the new index can only index .class and .jar files, not .java files. Also, many APIs are still implemented directly based on the legacy index, so both indices currently exist in parallel.

General Info

Stored in a single file, workspace/.metadata/org.eclipse.jdt.core/index.db

Design doc: https://docs.google.com/document/d/1w3-ufZyISbqH8jxYv689Exjm0haAGufdcSvEAgl2HQ4/edit

Bugs are tagged with the prefix [newindex] in the subject.

Where is the code

org.eclipse.jdt.internal.core.nd.db

Contains the implementation of Database, the virtual memory system. (Non-java-specific)

org.eclipse.jdt.internal.core.nd.field

Contains the implementation of the Field classes used to create the database structures. (Non-java-specific)

org.eclipse.jdt.internal.core.nd

Contains the implementation of Nd, the high-level interface for the database. (Non-java-specific)

org.eclipse.jdt.internal.core.nd.java

Contains the schema for the java language. The main entry point is JavaIndex. Java-specific.

org.eclipse.jdt.internal.core.nd.indexer

Contains the implementation of the indexer. Java-specific.

How do I benchmark the indexer?

Create a large workspace.

Enable the tracing option org.eclipse.jdt.core/debug/index/timing=true

Delete the index.db file. Then restart Eclipse.

Let the indexer run.

Eclipse will print out statistics about indexing time to the console that look like this:

   Indexing done at 2017-04-27 15:57:35.726
     Located 187 indexables in 340ms
     Tested 187 fingerprints in 4885ms, average time = 26.123ms
     Indexed 205598 classes (from 187 files containing 1018.934MiB) in 101104ms, average time per class = 0.492ms
     Chunks: total = 212942, in memory = 32768, dirty = 0, not in cache = 0
     Cache misses = 348755 (0.041%)
     Reads = 1362.324MiB, writes = 1399.242MiB
     Read speed = 1322.645MiB/s
     Write speed = 963.547MiB/s
     Time spent performing flushes = 15251ms (14.321%)
     Total indexing time = 106495ms

When benchmarking, it is best to intentionally fragment and re-index the workspace 2-3 times in a row, to get an idea of how the performance changes after multiple reindexing passes. See the section on fragmenting the index for details.

How do I find the cause of index corruption?

If you're seeing IndexExceptions being thrown in the log, this is a sign the index is getting corrupted.

Quite often, if corruption is caused by a bug in the index itself you'll be able to reproduce it consistently by repeatedly fragmenting and reindexing a large workspace with an initially-deleted index.

Enable the tracing option org.eclipse.jdt.core/debug/index/logsizemegs=1024

The numeric argument is a size in megabytes. This logs all writes to the database in a big circular buffer.

Then reproduce your corruption. When the IndexException is finally thrown, it will have a traceback attached that looks like this:

   org.eclipse.jdt.internal.core.nd.db.IndexException: Null data block found in metablock
   Related addresses:
   backpointer number 4 [address 116281380, size 4]: 
       wrote [address 116281362, size 4070] at time 574379275
           Writing field 0, a FieldString in struct NdConstantString
       malloc'd [address 116281354, size 4094] at time 574379271
           Writing field 0, a FieldString in struct NdConstantString
       wrote [address 116281352, size 4080] at time 574379270
           Writing field 0, a FieldString in struct NdConstantString
       malloc'd [address 116281354, size 4094] at time 574194812
           Writing field 3, a FieldManyToOne in struct NdVariable
       wrote [address 116281352, size 4080] at time 574194811
           Writing field 3, a FieldManyToOne in struct NdVariable
       malloc'd [address 116281354, size 4094] at time 573874828
           Writing field 0, a FieldManyToOne in struct NdMethodParameter
       wrote [address 116281352, size 4080] at time 573874827
           Writing field 0, a FieldManyToOne in struct NdMethodParameter
       malloc'd [address 116281354, size 4094] at time 572846736
           Writing field 0, a FieldManyToOne in struct NdMethodParameter
       wrote [address 116281352, size 4080] at time 572846735
           Writing field 0, a FieldManyToOne in struct NdMethodParameter
       malloc'd [address 116281354, size 4094] at time 572264886
           Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature
   
   field 0, a FieldPointer in struct RawGrowableArray [address 5844788, size 4]: 
       wrote [address 5844788, size 4] at time 572264893
           Writing field 0, a FieldPointer in struct RawGrowableArray
           Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature
   
   field 0, a FieldInt in struct GrowableBlockHeader [address 116281354, size 4]: 
       wrote [address 116281354, size 4] at time 574379274
           Writing field 0, a FieldString in struct NdConstantString
       malloc'd [address 116281354, size 4094] at time 574379271
           Writing field 0, a FieldString in struct NdConstantString
       wrote [address 116281352, size 4080] at time 574379270
           Writing field 0, a FieldString in struct NdConstantString
       wrote [address 116281354, size 4] at time 574362897
           Writing field 0, a FieldInt in struct GrowableBlockHeader
           Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature
       wrote [address 116281354, size 4] at time 574360856
           Writing field 0, a FieldInt in struct GrowableBlockHeader
           Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature
       wrote [address 116281354, size 4] at time 574353349
           Writing field 0, a FieldInt in struct GrowableBlockHeader
           Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature
       malloc'd [address 116281354, size 4094] at time 574194812
           Writing field 3, a FieldManyToOne in struct NdVariable
       malloc'd [address 116281354, size 4094] at time 573874828
           Writing field 0, a FieldManyToOne in struct NdMethodParameter
       malloc'd [address 116281354, size 4094] at time 572846736
           Writing field 0, a FieldManyToOne in struct NdMethodParameter
       malloc'd [address 116281354, size 4094] at time 572264886
           Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature

This shows all the memory addresses involved in the corruption and the history of all write, malloc, and free calls that covered each address. The lines that look like this are a poor-man's stack trace that describe the point in the call where the particular write occurred:

       Writing field 0, a FieldInt in struct GrowableBlockHeader
       Writing field 1, a FieldManyToOne in struct NdComplexTypeSignature

How do I detect corruption earlier?

The following tracing option causes the indexer to perform periodic self-tests:

org.eclipse.jdt.core/debug/index/freespacetest=true

This slows down indexing quite a bit. If you have a reproducible test-case that produces corruption at a certain time, you can manually edit the Database.periodicValidateFreeSpace method to control when the tests are performed.

You can call getLog().getWriteCount() to get a time integer that matches the "at time" messages in the IndexException.

How do I test the index in a fragmented state?

When the indexer runs on an initially-empty database, everything in the index ends up being allocated in consecutive memory locations. This produce artificially-optimistic performance numbers. You can force the database to re-index everything in a fairly realistic way if you set all the file fingerprints to something invalid and then retrigger the indexer.

This can be done by modifying the implementation of Indexer.rebuildIndex like this:

   public void rebuildIndex(IProgressMonitor monitor) throws CoreException {
       final int iterations = 5;
       SubMonitor loopMonitor = SubMonitor.convert(monitor, iterations);
       for (int rebuildCounter = 0; rebuildCounter < iterations; rebuildCounter++) { 
           SubMonitor iterationMonitor = loopMonitor.split(1).setWorkRemaining(100);
           JavaIndex index = JavaIndex.getIndex(this.nd);
           this.nd.acquireWriteLock(iterationMonitor.split(1));
           try {
               List`<NdResourceFile>` files = index.getAllResourceFiles();
               for (NdResourceFile next : files) {
                   FileFingerprint modifiedFingerprint = new FileFingerprint(0xbaadd00d, 0xbabef00d, 0xabbabaad);
                   next.setFingerprint(modifiedFingerprint);
               }
           } finally {
               this.nd.releaseWriteLock();
           }
           rescan(iterationMonitor.split(98));
       }
   }

Then run the "rebuild java index" command in the UI. Doing so will rebuild the index 5 times in a row using the invalid fingerprint trick. Of course, you shouldn't commit this since it breaks the usual usage of the rebuild java index command.

This is also a good way to test the index for corruption in a more real-world use-case.

What if the content in the index doesn't match the input files?

Enable this tracing option:

org.eclipse.jdt.core/debug/index/selftest=true

This will cause the indexer to read back every class immediately after inserting it into the index and compare it with the original .class file. If anything is different, it will throw an exception. Put a breakpoint on the line that throws the exception, then use Drop To Frame to re-run the addClassToIndex method. That will let you step through what the indexer was doing while indexing the problematic class.

How do I reduce the size of the index?

Enable this tracing option:

org.eclipse.jdt.core/debug/index/space=false

After each reindexing pass, this will cause the indexer to display a histogram of where the space in the index is being allocated. You can use this to identify hotspots and opportunities for savings. In the code, the histogram bin for any given call is controlled by the second argument to malloc or free. You can control how the statistics are collected by rearranging the bins.

Typical output looks like this:

   Allocated size: 793.441MiB
   malloc'ed: 812.253MiB
   free'd: 21.51MiB
   wasted: 2.698MiB
   Free blocks
   NdType 563819 allocations, 291.566MiB
   Short Strings 5824608 allocations, 271.815MiB
   NdMethod 1646995 allocations, 75.274MiB
   Growable Arrays 1511602 allocations, 55.234MiB
   NdComplexTypeSignature 684498 allocations, 52.239MiB
   NdTypeArgument 648059 allocations, 15.03MiB
   NdTypeId 131926 allocations, 10.068MiB
   NdConstantInt 137160 allocations, 4.19MiB
   B-Trees 30196 allocations, 3.686MiB
   NdTypeInterface 84485 allocations, 1.958MiB
   NdResourceFile 787 allocations, 1.754MiB
   NdConstantString 55505 allocations, 1.695MiB
   NdMethodAnnotationData 52955 allocations, 1.635MiB
   Linked Lists 58047 allocations, 1.55MiB
   NdConstantLong 29612 allocations, 0.905MiB
   NdBinding 24013 allocations, 0.872MiB
   Long Strings 174 allocations, 0.48MiB
   NdVariable 8520 allocations, 0.266MiB
   NdConstantBoolean 4095 allocations, 0.125MiB
   NdConstantClass 2382 allocations, 0.073MiB
   NdConstantShort 2318 allocations, 0.071MiB
   NdConstantByte 2105 allocations, 0.064MiB
   NdConstantArray 1246 allocations, 0.048MiB
   NdConstantEnum 1207 allocations, 0.046MiB
   NdConstantAnnotation 964 allocations, 0.044MiB
   NdConstantChar 1079 allocations, 0.033MiB
   NdConstantDouble 483 allocations, 0.015MiB
   NdConstantFloat 150 allocations, 0.005MiB
   Miscellaneous 15 allocations, 248B
   NdWorkspaceLocation 4 allocations, 64B

How do I debug race conditions?

Race conditions are often caused by what's in the index at any given time and what's in the JDT model cache at any given time. For this reason, one good approach is to add print statements all over the unit test, log whenever anything is added or removed from the model cache, and log whenever anything is added or removed from the index. Then you can determine whether or not a particular entity was present in the index or the cache at any given moment.

Enable this tracing option to list each class that is added/removed from the index:

org.eclipse.jdt.core/debug/index/insertions=true

...and use this tracing option to list each class that is added/removed from the model cache:

org.eclipse.jdt.core/debug/javamodel/insertions=true

It is sometimes useful to log the time at which the indexer was scheduled, which can be done with this trace option:

org.eclipse.jdt.core/debug/index/scheduling=true

What tracing options should I use when debugging?

The following tracing options produce useful high-level information about what the index is doing without too much spam:

   org.eclipse.jdt.core/debug/index/indexer=true
   org.eclipse.jdt.core/debug/index/space=true
   org.eclipse.jdt.core/debug/index/timing=true

How do I debug deadlocks?

If the deadlock appears to be caused by the read/write lock on the Database, you can generate some useful diagnostics using this tracing option:

org.eclipse.jdt.core/debug/index/locks=true

If the deadlock appears to be caused by waiting on the indexer job, use the tracing options that track scheduling and running of the indexer.

Where can I find examples of using the index?

BinaryTypeFactory.readFromIndex demonstrates how to create a model object whose implementation is backed by the index. Also look at the implementation of IndexBinaryType for examples of doing various types of reads.

IndexBasedHierarchyBuilder.newSearchAllPossibleSubTypes demonstrates how to perform a breadth-first search on the type hierarchy rooted at a given class.

Error Handling

If the index is corrupted, it should throw an IndexException as soon as the corruption is detected. The correct response to an IndexException is to delete the entire index and rebuild it. IndexException should *NOT* be used for other kinds of errors since throwing it will result in the index being deleted. It also initiates self-diagnostics that are only appropriate for debugging index corruption.

Code that throws IndexException can attach address ranges to the exception. Such code should attach the most specific addresses that were read from when determining that the index was corrupt. For example, if two ints were expected to be equal, the code should attach the addresses from which each int was read. Don't attach the memory range for the entire struct that contains the int - just include the memory range for the int itself.

Programming errors should be detected using something like assertions, IllegalStateException, etc.

I/O errors or corrupted input files should be detected by some kind of checked exception (like CoreException).

Known Problems

Rework the model cache (Bug 497513)

The JDT model cache is not well optimized for the index. The index is optimal when you do lots of small reads as lazily as possible. The JDT model cache was designed to do a small number of big reads as eagerly as possible (it assumes that opening a class file is slow and extracting each field is fast). This means that it wastes a lot of the time saved by the index in order to unnecessarily cache stuff that could be fetched lazily from the index. In our experiments, we found that changes to the model cache could more than double the speed of the type hierarchy view. We expect similar speedups everywhere else in the UI as well.

Fix fragmentation (Bug 512921)

When the indexer first runs, it puts all of its structures in consecutive memory locations. That means that references between structures within the same class are usually within the same database page. After a number of reindexing passes, the number of cross-references between pages increases and performance of the database degrades. We could fix this by using arena allocators. That would ensure that memory for any given class would always be within the same page.

Once fixed, the index should always stay as fast as it is on the first indexing pass, no matter how many times it has to perform reindexing of the same artifacts.

Deadlock risk in Indexer.waitForIndex (Bug 509558)

The indexer sometimes obtains the workspace lock. That means if you call Indexer.waitForIndex from a thread that holds the workspace lock, it is likely deadlock the indexer. Currently this is not a problem since we don't (yet) call waitForIndex in such situations, but this needs to be fixed before the index can be adopted in SearchEngine, which will need to make such calls.

This could be fixed by changing Job.join to share locks from the joining thread to the joined thread - or by rewriting the indexer to avoid obtaining the workspace lock. Preferably both.

Improve the event model for the index (No bug)

Currently JDT UI always uses the blocking variant of the JDT core calls (it always waits for the indexer to finish before doing any kind of search). With the new index, the nonblocking variants will produce much better results since the index is still functional during indexing. This will resolve a lot of UI freezes in JDT UI. However, in order for this to work, JDT UI will need to do something like this (pseudocode):

   void openSomeView() {
       updateUINow();
       jdtCore.addListenerToBeNotifiedWhenIndexerIsDone(() -> {updateUiNow();});
   }
   
   void updateUINow() {
       results = jdtCore.searchForStuffWithoutBlockingOnIndexer();
       ui.showResults(results);
   }

When the UI first shows search results, they may be incomplete since the indexer may still be running. For this reason, JDT UI should be listening to events from JDT core that indicates that the indexer is done running and refresh itself appropriately.

Currently there is no good event for this. When its done indexing, the indexer currently fires model deltas for external jar files in the same way it would if those jars had changed on disk, but this isn't ideal since the UI can't see the difference between a real change on disk and indexer completion. It also means that code which observes the .jar file itself would see two change events for each change, which may be inefficient for some observers.

This problem should really be sorted out. We could either add a new type of event that indicates that the indexer has completed or we could delay all model deltas until the content can be found in the index.

Next Features to add

Implement a source indexer (bug 496136)

Before we can delete the legacy indexer, the new indexer needs to start indexing .java files as well as .class files. When the autobuilder is on, it could do this by piggybacking on the compiler and indexing the .class files generated from each .java file every time the compiler runs on it. When the autobuilder is off, we could compile .class files to a temporary location and index those results.

I'd recommend against trying to index the .java files directly -- in the presence of lambdas, this is almost as expensive as compiling the .class files would be, so it's not as efficient as it would have been in older versions of Java.

Add method call sites

In order to optimize the call hierarchy view, the index needs to contain call site information. Currently this is not collected by the indexer or stored in the index.

Port SearchEngine to the new index

Searches are significantly faster in the new index, so porting SearchEngine to the new APIs should provide noticeable speedups everywhere in JDT.

Rework JDT UI from using blocking calls to asynchronous calls + change events

With the new index, nonblocking calls will be both faster and return better results. However, any call that blocks on the index may be slightly slower while the indexer is running due to the slower indexer.

For this reason, every call in JDT UI that currently blocks on the indexer to produce user output should be refactored to perform a nonblocking call, display those results, and then update those results when and if a change event arrives from the indexer.

Calls in JDT UI that modify code (refactoring, etc) or otherwise produce irreversible operations should continue to block as they do now.

I believe this is the cause of the current slowness in the type hierarchy when the indexer is running.

Add incremental indexing (Bug 510212)

Currently, the indexer reacts to any change by rescanning the entire workspace for changes and comparing the file fingerprints to the database. This is more efficient than it sounds, but it could be made a lot faster if we made use of change deltas and only rescanned parts of the workspace that were known to have changed. Full rescans could still be performed to catch and recover from errors, but they would be very infrequent.

This would also work as a strategy for removing workspace locks from the indexer. The component that reacts to the deltas could copy all data that needs to be obtained while holding the workspace lock and copy it somewhere for the indexer to access later. The indexer itself could then run lock-free. (see bug 509558).

This would speed up the unit tests considerably and speed up many operations that block on the index.

Clone this wiki locally