Fix macos build

.config/nextest.toml

@@ -0,0 +1,118 @@
+# This is based on the default config used by nextest. It is embedded in the binary at
+# build time. It may be used as a template for .config/nextest.toml.
+
+[store]
+# The directory under the workspace root at which nextest-related files are
+# written. Profile-specific storage is currently written to dir/<profile-name>.
+dir = "target/nextest"
+
+[test-groups]
+serial-integration = { max-threads = 1 }
+
+# This section defines the default nextest profile. Custom profiles are layered
+# on top of the default profile.
+[profile.default]
+# "retries" defines the number of times a test should be retried. If set to a
+# non-zero value, tests that succeed on a subsequent attempt will be marked as
+# non-flaky. Can be overridden through the `--retries` option.
+# Examples
+# * retries = 3
+# * retries = { backoff = "fixed", count = 2, delay = "1s" }
+# * retries = { backoff = "exponential", count = 10, delay = "1s", jitter = true, max-delay = "10s" }
+retries = 0
+
+# The number of threads to run tests with. Supported values are either an integer or
+# the string "num-cpus". Can be overridden through the `--test-threads` option.
+test-threads = "num-cpus"
+
+# The number of threads required for each test. This is generally used in overrides to
+# mark certain tests as heavier than others. However, it can also be set as a global parameter.
+threads-required = 1
+
+# Show these test statuses in the output.
+#
+# The possible values this can take are:
+# * none: no output
+# * fail: show failed (including exec-failed) tests
+# * retry: show flaky and retried tests
+# * slow: show slow tests
+# * pass: show passed tests
+# * skip: show skipped tests (most useful for CI)
+# * all: all of the above
+#
+# Each value includes all the values above it; for example, "slow" includes
+# failed and retried tests.
+#
+# Can be overridden through the `--status-level` flag.
+status-level = "pass"
+
+# Similar to status-level, show these test statuses at the end of the run.
+final-status-level = "flaky"
+
+# "failure-output" defines when standard output and standard error for failing tests are produced.
+# Accepted values are
+# * "immediate": output failures as soon as they happen
+# * "final": output failures at the end of the test run
+# * "immediate-final": output failures as soon as they happen and at the end of
+#   the test run; combination of "immediate" and "final"
+# * "never": don't output failures at all
+#
+# For large test suites and CI it is generally useful to use "immediate-final".
+#
+# Can be overridden through the `--failure-output` option.
+failure-output = "immediate"
+
+# "success-output" controls production of standard output and standard error on success. This should
+# generally be set to "never".
+success-output = "never"
+
+# Cancel the test run on the first failure. For CI runs, consider setting this
+# to false.
+fail-fast = true
+
+# Treat a test that takes longer than the configured 'period' as slow, and print a message.
+# See <https://nexte.st/book/slow-tests> for more information.
+#
+# Optional: specify the parameter 'terminate-after' with a non-zero integer,
+# which will cause slow tests to be terminated after the specified number of
+# periods have passed.
+# Example: slow-timeout = { period = "60s", terminate-after = 2 }
+slow-timeout = { period = "60s" }
+
+# Treat a test as leaky if after the process is shut down, standard output and standard error
+# aren't closed within this duration.
+#
+# This usually happens in case of a test that creates a child process and lets it inherit those
+# handles, but doesn't clean the child process up (especially when it fails).
+#
+# See <https://nexte.st/book/leaky-tests> for more information.
+leak-timeout = "100ms"
+
+[profile.default.junit]
+# Output a JUnit report into the given file inside 'store.dir/<profile-name>'.
+# If unspecified, JUnit is not written out.
+
+# path = "junit.xml"
+
+# The name of the top-level "report" element in JUnit report. If aggregating
+# reports across different test runs, it may be useful to provide separate names
+# for each report.
+report-name = "nextest-run"
+
+# Whether standard output and standard error for passing tests should be stored in the JUnit report.
+# Output is stored in the <system-out> and <system-err> elements of the <testcase> element.
+store-success-output = false
+
+# Whether standard output and standard error for failing tests should be stored in the JUnit report.
+# Output is stored in the <system-out> and <system-err> elements of the <testcase> element.
+#
+# Note that if a description can be extracted from the output, it is always stored in the
+# <description> element.
+store-failure-output = true
+
+[[profile.default.overrides]]
+# `is_probably_prime` test heavily use rdrand, sometimes the VM where test is running has shortage on it
+filter = 'test(is_probably_prime)'
+retries = { backoff = "exponential", count = 6, delay = "1s", jitter = true }
+test-group = 'serial-integration'
+

.github/workflows/test.yml

@@ -54,6 +54,9 @@ jobs:
           - rust: nightly
             target: x86_64-unknown-linux-gnu
             os: ubuntu-20.04
+          - rust: stable
+            target: x86_64-apple-darwin
+            os: macos-latest
 
     runs-on: ${{ matrix.os }}
 

ci.sh

@@ -43,6 +43,9 @@ case "$TRAVIS_RUST_VERSION" in
                     cargo nextest run --no-default-features --features "$FEAT"no_std_deps,rdrand,time --target $TARGET
                     cargo nextest run --no-default-features --features "$FEAT"no_std_deps --target $TARGET
                 fi
+                if [ "$TARGET" == "x86_64-apple-darwin" ]; then
+                    cargo nextest run --no-default-features --features no_std_deps --target $TARGET
+                fi
 
             else
                 cargo +$TRAVIS_RUST_VERSION test --no-run --features "$FEAT" --target=$TARGET

mbedtls-sys/build/cmake.rs

@@ -19,6 +19,8 @@ impl super::BuildConfig {
         .define("ENABLE_TESTING", "OFF")
         // This is turn off on windows by default
         .define("GEN_FILES", "ON")
+        // Prefer unix-style over Apple-style Python3 on macOS, required for the Github Actions CI
+        .define("Python3_FIND_FRAMEWORK", "LAST")
         .build_target("install");
         for cflag in &self.cflags {
             cmk.cflag(cflag);

mbedtls/Cargo.toml

@@ -2,7 +2,7 @@
 name = "mbedtls"
 # We jumped from v0.9 to v0.12 because v0.10 and v0.11 were based on mbedtls 3.X, which
 # we decided not to support.
-version = "0.12.0-alpha.1"
+version = "0.12.0-alpha.2"
 authors = ["Jethro Beekman <[email protected]>"]
 build = "build.rs"
 edition = "2018"

mbedtls/src/alloc.rs

@@ -16,9 +16,9 @@ use core::ptr::NonNull;
 use mbedtls_sys::types::raw_types::c_void;
 
 extern "C" {
-    #[link_name = concat!("\u{1}forward_mbedtls_free_", env!("RUST_MBEDTLS_METADATA_HASH"))]
+    #[link_name = concat!("forward_mbedtls_free_", env!("RUST_MBEDTLS_METADATA_HASH"))]
     pub(crate) fn mbedtls_free(n: *mut mbedtls_sys::types::raw_types::c_void);
-    #[link_name = concat!("\u{1}forward_mbedtls_calloc_", env!("RUST_MBEDTLS_METADATA_HASH"))]
+    #[link_name = concat!("forward_mbedtls_calloc_", env!("RUST_MBEDTLS_METADATA_HASH"))]
     pub(crate) fn mbedtls_calloc(
         n: mbedtls_sys::types::size_t,
         size: mbedtls_sys::types::size_t,