build(deps): bump certifi from 2023.7.22 to 2024.7.4 in /drivers/gpu/drm/ci/xfails #17
+1
−1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![dependabot[bot]](https://avatars.githubusercontent.com/in/29110?s=60&v=4){kind=small}
Bumps [certifi](https://github.com/certifi/python-certifi) from 2023.7.22 to 2024.7.4. - [Commits](certifi/python-certifi@2023.07.22...2024.07.04) --- updated-dependencies: - dependency-name: certifi dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]>
ldalek
pushed a commit
to ldalek/linux-stable
that referenced
this pull request
Jul 7, 2024
commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ldalek
pushed a commit
to ldalek/linux-stable
that referenced
this pull request
Jul 7, 2024
commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ldalek
pushed a commit
to ldalek/linux-stable
that referenced
this pull request
Jul 7, 2024
commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ldalek
pushed a commit
to ldalek/linux-stable
that referenced
this pull request
Jul 7, 2024
commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ldalek
pushed a commit
to ldalek/linux-stable
that referenced
this pull request
Jul 7, 2024
commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to Boeing/linux
that referenced
this pull request
Jul 8, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
puranjaymohan
pushed a commit
to puranjaymohan/linux
that referenced
this pull request
Jul 10, 2024
…rnel/git/netfilter/nf-next into main Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch amazonlinux#1 to gregkh#11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch amazonlinux#1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch gregkh#12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch gregkh#13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch gregkh#14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch gregkh#15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch gregkh#16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch gregkh#17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by: David S. Miller <[email protected]>
nquest
pushed a commit
to nquest/linux-stable
that referenced
this pull request
Jul 14, 2024
[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 gregkh#1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) gregkh#2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) gregkh#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 gregkh#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 gregkh#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 gregkh#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 gregkh#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 gregkh#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 gregkh#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 gregkh#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 gregkh#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 gregkh#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 gregkh#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 gregkh#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 gregkh#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 gregkh#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 gregkh#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 gregkh#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mngyadam
pushed a commit
to amazonlinux/linux
that referenced
this pull request
Jul 15, 2024
[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 gregkh#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 gregkh#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 gregkh#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 gregkh#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 gregkh#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 gregkh#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 gregkh#12 [ffffa65531497b68] printk at ffffffff89318306 gregkh#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 gregkh#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] gregkh#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] gregkh#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] gregkh#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] gregkh#18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 68459b8) Signed-off-by: Vegard Nossum <[email protected]>
rsalvaterra
pushed a commit
to rsalvaterra/linux
that referenced
this pull request
Jul 15, 2024
[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 gregkh#1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) gregkh#2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) gregkh#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 gregkh#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 gregkh#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 gregkh#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 gregkh#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 gregkh#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 gregkh#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 gregkh#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 gregkh#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 gregkh#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 gregkh#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 gregkh#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 gregkh#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 gregkh#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 gregkh#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 gregkh#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RadxaNaoki
pushed a commit
to RadxaNaoki/linux
that referenced
this pull request
Aug 28, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 gregkh#1 __crash_kexec at ffffffff8c1338fa gregkh#2 panic at ffffffff8c1d69b9 gregkh#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] gregkh#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] gregkh#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] gregkh#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] gregkh#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] gregkh#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] gregkh#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] gregkh#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] gregkh#11 dio_complete at ffffffff8c2b9fa7 gregkh#12 do_blockdev_direct_IO at ffffffff8c2bc09f gregkh#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] gregkh#14 generic_file_direct_write at ffffffff8c1dcf14 gregkh#15 __generic_file_write_iter at ffffffff8c1dd07b gregkh#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] gregkh#17 aio_write at ffffffff8c2cc72e gregkh#18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Aug 29, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
gregkh#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
gregkh#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
gregkh#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
gregkh#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
gregkh#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
gregkh#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
gregkh#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
gregkh#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
gregkh#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
gregkh#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <[email protected]>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
zhuyj
pushed a commit
to zhuyj/linux
that referenced
this pull request
Sep 3, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
gregkh#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
gregkh#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
gregkh#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
gregkh#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
gregkh#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
gregkh#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
gregkh#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
gregkh#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
gregkh#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
gregkh#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <[email protected]>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Sep 4, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Sep 4, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Sep 4, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Sep 4, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Sep 4, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Sep 4, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
rsalvaterra
pushed a commit
to rsalvaterra/linux
that referenced
this pull request
Sep 21, 2024
[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 gregkh#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 gregkh#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e gregkh#3 [fffffe00003fced0] do_nmi at ffffffff8922660d gregkh#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 gregkh#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 gregkh#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 gregkh#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 gregkh#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 gregkh#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 gregkh#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 gregkh#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 gregkh#12 [ffffa65531497b68] printk at ffffffff89318306 gregkh#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 gregkh#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] gregkh#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] gregkh#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] gregkh#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] gregkh#18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Sep 22, 2024
iter_finish_branch_entry() doesn't put the branch_info from/to map
elements creating memory leaks. This can be seen with:
```
$ perf record -e cycles -b perf test -w noploop
$ perf report -D
...
Direct leak of 984344 byte(s) in 123043 object(s) allocated from:
#0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69
gregkh#1 0x564d3400d10b in map__get util/map.h:186
gregkh#2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981
gregkh#3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151
gregkh#4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898
gregkh#5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238
gregkh#6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334
gregkh#7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655
gregkh#8 0x564d3403ba52 in do_flush util/ordered-events.c:245
gregkh#9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324
gregkh#10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708
gregkh#11 0x564d34032480 in perf_session__process_event util/session.c:1877
gregkh#12 0x564d340336ad in reader__read_event util/session.c:2399
gregkh#13 0x564d34033fdc in reader__process_events util/session.c:2448
gregkh#14 0x564d34033fdc in __perf_session__process_events util/session.c:2495
gregkh#15 0x564d34033fdc in perf_session__process_events util/session.c:2661
gregkh#16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065
gregkh#17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805
gregkh#18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350
#19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403
#20 0x564d33cdd827 in run_argv tools/perf/perf.c:447
#21 0x564d33cdd827 in main tools/perf/perf.c:561
...
```
Clearing up the map_symbols properly creates maps reference count
issues so resolve those. Resolving this issue doesn't improve peak
heap consumption for the test above.
Committer testing:
$ sudo dnf install libasan
$ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Yanteng Si <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Sep 22, 2024
The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 gregkh#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 gregkh#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 gregkh#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 gregkh#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 gregkh#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 gregkh#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 gregkh#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 gregkh#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 gregkh#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 gregkh#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 gregkh#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 gregkh#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 gregkh#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 gregkh#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 gregkh#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 gregkh#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 gregkh#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Sep 29, 2024
During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 10, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 10, 2024
commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 gregkh#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 gregkh#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 gregkh#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 gregkh#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 gregkh#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 gregkh#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 gregkh#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 gregkh#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 gregkh#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 gregkh#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 gregkh#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 gregkh#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 gregkh#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 gregkh#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 gregkh#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 gregkh#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 gregkh#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 10, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 10, 2024
commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 gregkh#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 gregkh#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 gregkh#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 gregkh#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 gregkh#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 gregkh#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 gregkh#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 gregkh#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 gregkh#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 gregkh#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 gregkh#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 gregkh#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 gregkh#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 gregkh#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 gregkh#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 gregkh#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 gregkh#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 10, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 10, 2024
commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 gregkh#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 gregkh#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 gregkh#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 gregkh#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 gregkh#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 gregkh#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 gregkh#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 gregkh#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 gregkh#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 gregkh#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 gregkh#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 gregkh#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 gregkh#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 gregkh#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 gregkh#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 gregkh#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 gregkh#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 17, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 17, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 17, 2024
commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 gregkh#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 gregkh#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 gregkh#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 gregkh#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 gregkh#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 gregkh#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 gregkh#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 gregkh#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 gregkh#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 gregkh#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 gregkh#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 gregkh#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 gregkh#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 gregkh#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 gregkh#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 gregkh#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 gregkh#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 17, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty gregkh#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Oct 17, 2024
commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 gregkh#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 gregkh#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 gregkh#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 gregkh#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 gregkh#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 gregkh#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 gregkh#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 gregkh#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 gregkh#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 gregkh#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 gregkh#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 gregkh#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 gregkh#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 gregkh#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 gregkh#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 gregkh#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 gregkh#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Nov 8, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Nov 8, 2024
[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
piso77
pushed a commit
to piso77/linux
that referenced
this pull request
Nov 19, 2024
My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [gregkh#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ gregkh#17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Nov 20, 2024
…dfl() When getting an LLC CPU mask in the default CPU selection policy, scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected dereference often causes the following warning and can cause an invalid memory access in the worst case. Therefore, protect dereference of a sched_domain pointer using a pair of rcu_read_lock() and unlock(). [ 20.996135] ============================= [ 20.996345] WARNING: suspicious RCU usage [ 20.996563] 6.11.0-virtme gregkh#17 Tainted: G W [ 20.996576] ----------------------------- [ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage! [ 20.996576] [ 20.996576] other info that might help us debug this: [ 20.996576] [ 20.996576] [ 20.996576] rcu_scheduler_active = 2, debug_locks = 1 [ 20.996576] 4 locks held by kworker/8:1/140: [ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590 [ 20.996576] gregkh#1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590 [ 20.996576] gregkh#2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60 [ 20.996576] gregkh#3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0 [ 20.996576] [ 20.996576] stack backtrace: [ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme gregkh#17 [ 20.996576] Tainted: [W]=WARN [ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 20.996576] Workqueue: pm pm_runtime_work [ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms [ 20.996576] Call Trace: [ 20.996576] <IRQ> [ 20.996576] dump_stack_lvl+0x6f/0xb0 [ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96 [ 20.996576] scx_select_cpu_dfl+0x234/0x260 [ 20.996576] select_task_rq_scx+0xfb/0x190 [ 20.996576] select_task_rq+0x47/0x110 [ 20.996576] try_to_wake_up+0x110/0x7d0 [ 20.996576] swake_up_one+0x39/0x60 [ 20.996576] rcu_core+0xb08/0xe50 [ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5 [ 20.996576] ? mark_held_locks+0x40/0x70 [ 20.996576] handle_softirqs+0xd3/0x410 [ 20.996576] irq_exit_rcu+0x78/0xa0 [ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80 [ 20.996576] </IRQ> [ 20.996576] <TASK> [ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70 [ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c [ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246 [ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040 [ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b [ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 [ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246 [ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800 [ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70 [ 20.996576] serial_port_runtime_resume+0xd4/0x1a0 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] __rpm_callback+0x44/0x170 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_callback+0x55/0x60 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_resume+0x582/0x7b0 [ 20.996576] pm_runtime_work+0x7c/0xb0 [ 20.996576] process_one_work+0x1fb/0x590 [ 20.996576] worker_thread+0x18e/0x350 [ 20.996576] ? __pfx_worker_thread+0x10/0x10 [ 20.996576] kthread+0xe2/0x110 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork+0x34/0x50 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork_asm+0x1a/0x30 [ 20.996576] </TASK> [ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space) Signed-off-by: Changwoo Min <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
piso77
pushed a commit
to piso77/linux
that referenced
this pull request
Nov 21, 2024
The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ gregkh#17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables") Cc: <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
piso77
pushed a commit
to piso77/linux
that referenced
this pull request
Nov 29, 2024
In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped in order to acquire the node->lock first (lock nesting order). This can race with binder_node_release() and trigger a use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff53c04c29dd04 by task freeze/640 CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 gregkh#17 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_add_freeze_work+0x148/0x478 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 Allocated by task 637: __kmalloc_cache_noprof+0x12c/0x27c binder_new_node+0x50/0x700 binder_transaction+0x35ac/0x6f74 binder_thread_write+0xfb8/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 Freed by task 637: kfree+0xf0/0x330 binder_thread_read+0x1e88/0x3a68 binder_ioctl+0x16d8/0x25ac __arm64_sys_ioctl+0x124/0x190 ================================================================== Fix the race by taking a temporary reference on the node before releasing the proc->inner lock. This ensures the node remains alive while in use. Fixes: d579b04 ("binder: frozen notification") Cc: [email protected] Reviewed-by: Alice Ryhl <[email protected]> Acked-by: Todd Kjos <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Dec 1, 2024
Current loop calls vfs_statfs() while holding the q->limits_lock. If FS takes some locking in vfs_statfs callback, this may lead to ABBA locking bug (at least, FAT fs has this issue actually). So this patch calls vfs_statfs() outside q->limits_locks instead, because looks like no reason to hold q->limits_locks while getting discord configs. Chain exists of: &sbi->fat_lock --> &q->q_usage_counter(io)gregkh#17 --> &q->limits_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->limits_lock); lock(&q->q_usage_counter(io)gregkh#17); lock(&q->limits_lock); lock(&sbi->fat_lock); *** DEADLOCK *** Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=a5d8c609c02f508672cc Reviewed-by: Ming Lei <[email protected]> Signed-off-by: OGAWA Hirofumi <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
github-actions bot
pushed a commit
to sirdarckcat/linux-1
that referenced
this pull request
Dec 5, 2024
[ Upstream commit 826cc42 ] My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [gregkh#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ gregkh#17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 5, 2024
[ Upstream commit 826cc42 ] My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 9, 2024
[ Upstream commit 826cc42 ] My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 9, 2024
commit 17af2b3 upstream. The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables") Cc: <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 9, 2024
commit 17af2b3 upstream. The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables") Cc: <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 9, 2024
commit dc8aea4 upstream. In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped in order to acquire the node->lock first (lock nesting order). This can race with binder_node_release() and trigger a use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff53c04c29dd04 by task freeze/640 CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #17 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_add_freeze_work+0x148/0x478 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 Allocated by task 637: __kmalloc_cache_noprof+0x12c/0x27c binder_new_node+0x50/0x700 binder_transaction+0x35ac/0x6f74 binder_thread_write+0xfb8/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 Freed by task 637: kfree+0xf0/0x330 binder_thread_read+0x1e88/0x3a68 binder_ioctl+0x16d8/0x25ac __arm64_sys_ioctl+0x124/0x190 ================================================================== Fix the race by taking a temporary reference on the node before releasing the proc->inner lock. This ensures the node remains alive while in use. Fixes: d579b04 ("binder: frozen notification") Cc: [email protected] Reviewed-by: Alice Ryhl <[email protected]> Acked-by: Todd Kjos <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
qaz6750
added a commit
to qaz6750/linux-longterm
that referenced
this pull request
Dec 13, 2024
* xfs: remove unknown compat feature check in superblock write validation
[ Upstream commit 652f03db897ba24f9c4b269e254ccc6cc01ff1b7 ]
Compat features are new features that older kernels can safely ignore,
allowing read-write mounts without issues. The current sb write validation
implementation returns -EFSCORRUPTED for unknown compat features,
preventing filesystem write operations and contradicting the feature's
definition.
Additionally, if the mounted image is unclean, the log recovery may need
to write to the superblock. Returning an error for unknown compat features
during sb write validation can cause mount failures.
Although XFS currently does not use compat feature flags, this issue
affects current kernels' ability to mount images that may use compat
feature flags in the future.
Since superblock read validation already warns about unknown compat
features, it's unnecessary to repeat this warning during write validation.
Therefore, the relevant code in write validation is being removed.
Fixes: 9e037cb7972f ("xfs: check for unknown v5 feature bits in superblock write verifier")
Cc: [email protected] # v4.19+
Signed-off-by: Long Li <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Carlos Maiolino <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
* quota: flush quota_release_work upon quota writeback
[ Upstream commit ac6f420291b3fee1113f21d612fa88b628afab5b ]
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze.
Reported-by: Disha Goel <[email protected]>
CC: [email protected]
Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Reviewed-by: Baokun Li <[email protected]>
Signed-off-by: Ojaswin Mujoo <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: drop unused parameter file_offset from btrfs_encoded_read_regular_fill_pages()
[ Upstream commit 590168edbe6317ca9f4066215fb099f43ffe745c ]
The file_offset parameter used to be passed to encoded read struct but
was removed in commit b665affe93d8 ("btrfs: remove unused members from
struct btrfs_encoded_read_private").
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Stable-dep-of: 05b36b04d74a ("btrfs: fix use-after-free in btrfs_encoded_read_endio()")
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
[ Upstream commit 26efd44796c6dd7a64f039a0dda6d558eac97a3e ]
Change the behaviour of btrfs_encoded_read() so that if it needs to read
an extent from disk, it leaves the extent and inode locked and returns
-EIOCBQUEUED. The caller is then responsible for doing the I/O via
btrfs_encoded_read_regular() and unlocking the extent and inode.
Signed-off-by: Mark Harmstone <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Stable-dep-of: 05b36b04d74a ("btrfs: fix use-after-free in btrfs_encoded_read_endio()")
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
[ Upstream commit 68d3b27e05c7ca5545e88465f5e2be6eda0e11df ]
Change btrfs_encoded_read_regular_fill_pages() so that the priv struct
is allocated rather than stored on the stack, in preparation for adding
an asynchronous mode to the function.
Signed-off-by: Mark Harmstone <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Stable-dep-of: 05b36b04d74a ("btrfs: fix use-after-free in btrfs_encoded_read_endio()")
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: fix use-after-free in btrfs_encoded_read_endio()
[ Upstream commit 05b36b04d74a517d6675bf2f90829ff1ac7e28dc ]
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and the crash dump's vmcore file shows that
the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on
the wait_queue that is in the private data passed to the end_io handler.
Commit 4ff47df40447 ("btrfs: move priv off stack in
btrfs_encoded_read_regular_fill_pages()") moved 'struct
btrfs_encoded_read_private' off the stack.
Before that commit one can see a corruption of the private data when
analyzing the vmcore after a crash:
*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
.wait = (wait_queue_head_t){
.lock = (spinlock_t){
.rlock = (struct raw_spinlock){
.raw_lock = (arch_spinlock_t){
.val = (atomic_t){
.counter = (int)-2005885696,
},
.locked = (u8)0,
.pending = (u8)157,
.locked_pending = (u16)40192,
.tail = (u16)34928,
},
.magic = (unsigned int)536325682,
.owner_cpu = (unsigned int)29,
.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.head = (struct list_head){
.next = (struct list_head *)0x112cca,
.prev = (struct list_head *)0x47,
},
},
.pending = (atomic_t){
.counter = (int)-1491499288,
},
.status = (blk_status_t)130,
}
Here we can see several indicators of in-memory data corruption, e.g. the
large negative atomic values of ->pending or
->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic
0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus
pointer values for ->wait->head.
To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the
corruption, as atomic_dec_return() is defined as two instructions on
x86_64, whereas atomic_dec_and_test() is defined as a single atomic
operation. This can lead to a situation where counter value is already
decremented but the if statement in btrfs_encoded_read_endio() is not
completely processed, i.e. the 0 test has not completed. If another thread
continues executing btrfs_encoded_read_regular_fill_pages() the
atomic_dec_return() there can see an already updated ->pending counter and
continues by freeing the private data. Continuing in the endio handler the
test for 0 succeeds and the wait_queue is woken up, resulting in a
use-after-free.
Reported-by: Shinichiro Kawasaki <[email protected]>
Suggested-by: Damien Le Moal <[email protected]>
Fixes: 1881fba89bd5 ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: [email protected] # 6.1+
Reviewed-by: Filipe Manana <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: don't loop for nowait writes when checking for cross references
[ Upstream commit ed67f2a913a4f0fc505db29805c41dd07d3cb356 ]
When checking for delayed refs when verifying if there are cross
references for a data extent, we stop if the path has nowait set and we
can't try lock the delayed ref head's mutex, returning -EAGAIN with the
goal of making a write fallback to a blocking context. However we ignore
the -EAGAIN at btrfs_cross_ref_exist() when check_delayed_ref() returns
it, and keep looping instead of immediately returning the -EAGAIN to the
caller.
Fix this by not looping if we get -EAGAIN and we have a nowait path.
Fixes: 26ce91144631 ("btrfs: make can_nocow_extent nowait compatible")
CC: [email protected] # 6.1+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: add a sanity check for btrfs root in btrfs_search_slot()
[ Upstream commit 3ed51857a50f530ac7a1482e069dfbd1298558d4 ]
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is
corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent
info, btrfs_search_slot() doesn't check if the target root is NULL or
not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot().
Reported-by: [email protected]
Fixes: 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots")
Link: https://syzkaller.appspot.com/bug?extid=3030e17bd57a73d39bd7
CC: [email protected] # 5.15+
Reviewed-by: Qu Wenruo <[email protected]>
Tested-by: [email protected]
Signed-off-by: Lizhi Xu <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
* btrfs: ref-verify: fix use-after-free after invalid ref action
[ Upstream commit 7c4e39f9d2af4abaf82ca0e315d1fd340456620f ]
At btrfs_ref_tree_mod() after we successfully inserted the new ref entry
(local variable 'ref') into the respective block entry's rbtree (local
variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF,
we error out and free the ref entry without removing it from the block
entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call
btrfs_free_ref_cache(), which iterates over all block entries and then
calls free_block_entry() for each one, and there we will trigger a
use-after-free when we are called against the block entry to which we
added the freed ref entry to its rbtree, since the rbtree still points
to the block entry, as we didn't remove it from the rbtree before freeing
it in the error path at btrfs_ref_tree_mod(). Fix this by removing the
new ref entry from the rbtree before freeing it.
Syzbot report this with the following stack traces:
BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314
btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline]
btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23
btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482
btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293
vfs_unlink+0x365/0x650 fs/namei.c:4469
do_unlinkat+0x4ae/0x830 fs/namei.c:4533
__do_sys_unlinkat fs/namei.c:4576 [inline]
__se_sys_unlinkat fs/namei.c:4569 [inline]
__x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1
__btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521
update_ref_for_cow+0x96a/0x11f0
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
==================================================================
BUG: KASAN: slab-use-after-free in rb_first+0x69/0x70 lib/rbtree.c:473
Read of size 8 at addr ffff888042d1af38 by task syz.0.0/5329
CPU: 0 UID: 0 PID: 5329 Comm: syz.0.0 Not tainted 6.12.0-rc7-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
rb_first+0x69/0x70 lib/rbtree.c:473
free_block_entry+0x78/0x230 fs/btrfs/ref-verify.c:248
btrfs_free_ref_cache+0xa3/0x100 fs/btrfs/ref-verify.c:917
btrfs_ref_tree_mod+0x139f/0x15e0 fs/btrfs/ref-verify.c:898
btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f996df7e719
RSP: 002b:00007f996ede7038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f996e135f80 RCX: 00007f996df7e719
RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000004
RBP: 00007f996dff139e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f996e135f80 R15: 00007fff79f32e68
</TASK>
Allocated by task 5329:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:257 [inline]
__kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4295
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
btrfs_ref_tree_mod+0x264/0x15e0 fs/btrfs/ref-verify.c:701
btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5329:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:230 [inline]
slab_free_hook mm/slub.c:2342 [inline]
slab_free mm/slub.c:4579 [inline]
kfree+0x1a0/0x440 mm/slub.c:4727
btrfs_ref_tree_mod+0x136c/0x15e0
btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544
__btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523
update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512
btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594
btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754
btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411
__btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline]
__btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137
__btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171
btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313
prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586
relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611
btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377
__btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161
btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888042d1af00
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 56 bytes inside of
freed 64-byte region [ffff888042d1af00, ffff888042d1af40)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x42d1a
anon flags: 0x4fff00000000000(node=1|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 04fff00000000000 ffff88801ac418c0 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000200020 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x52c40(GFP_NOFS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 5055, tgid 5055 (dhcpcd-run-hook), ts 40377240074, free_ts 40376848335
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1541
prep_new_page mm/page_alloc.c:1549 [inline]
get_page_from_freelist+0x3649/0x3790 mm/page_alloc.c:3459
__alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4735
alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
alloc_slab_page+0x6a/0x140 mm/slub.c:2412
allocate_slab+0x5a/0x2f0 mm/slub.c:2578
new_slab mm/slub.c:2631 [inline]
___slab_alloc+0xcd1/0x14b0 mm/slub.c:3818
__slab_alloc+0x58/0xa0 mm/slub.c:3908
__slab_alloc_node mm/slub.c:3961 [inline]
slab_alloc_node mm/slub.c:4122 [inline]
__do_kmalloc_node mm/slub.c:4263 [inline]
__kmalloc_noprof+0x25a/0x400 mm/slub.c:4276
kmalloc_noprof include/linux/slab.h:882 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
tomoyo_encode2 security/tomoyo/realpath.c:45 [inline]
tomoyo_encode+0x26f/0x540 security/tomoyo/realpath.c:80
tomoyo_realpath_from_path+0x59e/0x5e0 security/tomoyo/realpath.c:283
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_check_open_permission+0x255/0x500 security/tomoyo/file.c:771
security_file_open+0x777/0x990 security/security.c:3109
do_dentry_open+0x369/0x1460 fs/open.c:945
vfs_open+0x3e/0x330 fs/open.c:1088
do_open fs/namei.c:3774 [inline]
path_openat+0x2c84/0x3590 fs/namei.c:3933
page last free pid 5055 tgid 5055 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1112 [inline]
free_unref_page+0xcfb/0xf20 mm/page_alloc.c:2642
free_pipe_info+0x300/0x390 fs/pipe.c:860
put_pipe_info fs/pipe.c:719 [inline]
pipe_release+0x245/0x320 fs/pipe.c:742
__fput+0x23f/0x880 fs/file_table.c:431
__do_sys_close fs/open.c:1567 [inline]
__se_sys_close fs/open.c:1552 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1552
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Memory state around the buggy address:
ffff888042d1ae00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888042d1ae80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff888042d1af00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888042d1af80: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
ffff888042d1b000: 00 00 00 00 00 fc fc 00 00 00 00 00 fc fc 00 00
Reported-by: [email protected]
Link: https://lore.kernel.org/linux-btrfs/[email protected]/T/#u
Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool")
CC: [email protected] # 4.19+
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
* iommu/tegra241-cmdqv: Fix unused variable warning
commit 5492f0c4085a8fb8820ff974f17b83a7d6dab5a5 upstream.
While testing some io-pgtable changes, I ran into a compiler warning
from the Tegra CMDQ driver:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:803:23: warning: unused variable 'cmdqv_debugfs_dir' [-Wunused-variable]
803 | static struct dentry *cmdqv_debugfs_dir;
| ^~~~~~~~~~~~~~~~~
1 warning generated.
Guard the variable declaration with CONFIG_IOMMU_DEBUGFS to silence the
warning.
Signed-off-by: Will Deacon <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* netkit: Add option for scrubbing skb meta data
commit 83134ef4609388f6b9ca31a384f531155196c2a7 upstream.
Jordan reported that when running Cilium with netkit in per-endpoint-routes
mode, network policy misclassifies traffic. In this direct routing mode
of Cilium which is used in case of GKE/EKS/AKS, the Pod's BPF program to
enforce policy sits on the netkit primary device's egress side.
The issue here is that in case of netkit's netkit_prep_forward(), it will
clear meta data such as skb->mark and skb->priority before executing the
BPF program. Thus, identity data stored in there from earlier BPF programs
(e.g. from tcx ingress on the physical device) gets cleared instead of
being made available for the primary's program to process. While for traffic
egressing the Pod via the peer device this might be desired, this is
different for the primary one where compared to tcx egress on the host
veth this information would be available.
To address this, add a new parameter for the device orchestration to
allow control of skb->mark and skb->priority scrubbing, to make the two
accessible from BPF (and eventually leave it up to the program to scrub).
By default, the current behavior is retained. For netkit peer this also
enables the use case where applications could cooperate/signal intent to
the BPF program.
Note that struct netkit has a 4 byte hole between policy and bundle which
is used here, in other words, struct netkit's first cacheline content used
in fast-path does not get moved around.
Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Reported-by: Jordan Rife <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Link: https://github.com/cilium/cilium/issues/34042
Acked-by: Jakub Kicinski <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* md/raid5: Wait sync io to finish before changing group cnt
commit fa1944bbe6220eb929e2c02e5e8706b908565711 upstream.
One customer reports a bug: raid5 is hung when changing thread cnt
while resync is running. The stripes are all in conf->handle_list
and new threads can't handle them.
Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removes
pers->quiesce from mddev_suspend/resume. Before this patch, mddev_suspend
needs to wait for all ios including sync io to finish. Now it's used
to only wait normal io.
Fix this by calling raid5_quiesce from raid5_store_group_thread_cnt
directly to wait all sync requests to finish before changing the group
cnt.
Fixes: b39f35ebe86d ("md: don't quiesce in mddev_suspend()")
Cc: [email protected]
Signed-off-by: Xiao Ni <[email protected]>
Reviewed-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* md/md-bitmap: Add missing destroy_work_on_stack()
commit 6012169e8aae9c0eda38bbedcd7a1540a81220ae upstream.
This commit add missed destroy_work_on_stack() operations for
unplug_work.work in bitmap_unplug_async().
Fixes: a022325ab970 ("md/md-bitmap: add a new helper to unplug bitmap asynchrously")
Cc: [email protected]
Signed-off-by: Yuan Can <[email protected]>
Reviewed-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
commit 2496b2aaacf137250f4ca449f465e2cadaabb0e8 upstream.
The way InvenSense MPU-6050 accelerometer is mounted on the user-facing side
of the Pine64 PinePhone mainboard, which makes it rotated 90 degrees counter-
clockwise, [1] requires the accelerometer's x- and y-axis to be swapped, and
the direction of the accelerometer's y-axis to be inverted.
Rectify this by adding a mount-matrix to the accelerometer definition in the
Pine64 PinePhone dtsi file.
[1] https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20bottom%20placement%20v1.1%2020191031.pdf
Fixes: 91f480d40942 ("arm64: dts: allwinner: Add initial support for Pine64 PinePhone")
Cc: [email protected]
Suggested-by: Ondrej Jirman <[email protected]>
Suggested-by: Andrey Skvortsov <[email protected]>
Signed-off-by: Dragan Simic <[email protected]>
Reviewed-by: Andrey Skvortsov <[email protected]>
Link: https://patch.msgid.link/129f0c754d071cca1db5d207d9d4a7bd9831dff7.1726773282.git.dsimic@manjaro.org
[[email protected]: Replaced Helped-by with Suggested-by]
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* arm64: dts: mediatek: mt8186-corsola: Fix GPU supply coupling max-spread
commit 2f1aab0cb0661d533f008e4975325080351cdfc8 upstream.
The GPU SRAM supply is supposed to be always at least 0.1V higher than
the GPU supply. However when the DT was upstreamed, the spread was
incorrectly set to 0.01V.
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: [email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay
commit 0ca7699c376743b633b6419a42888dba386d5351 upstream.
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Cc: [email protected]
Signed-off-by: Francesco Dolcini <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay
commit 2213ca51998fef61d3df4ca156054cdcc37c42b8 upstream.
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: 316b80246b16 ("arm64: dts: ti: add verdin am62")
Cc: [email protected]
Signed-off-by: Francesco Dolcini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity
commit fbcc95fceb6d179dd150df2dc613dfd9b013052c upstream.
The reset line of the IT6505 bridge chip is active low, not active high.
It was incorrectly inverted in the device tree as the implementation at
the time incorrectly inverted the polarity in its driver, due to a prior
device having an inline inverting level shifter.
Fix the polarity now while the external display pipeline is incomplete,
thereby avoiding any impact to running systems.
A matching fix for the driver should be included if this change is
backported.
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: [email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: qcom: camss: fix error path on configuration of power domains
commit 4f45d65b781499d2a79eca12155532739c876aa2 upstream.
There is a chance to meet runtime issues during configuration of CAMSS
power domains, because on the error path dev_pm_domain_detach() is
unexpectedly called with NULL or error pointer.
One of the simplest ways to reproduce the problem is to probe CAMSS
driver before registration of CAMSS power domains, for instance if
a platform CAMCC driver is simply not built.
Warning backtrace example:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a2
<snip>
pc : dev_pm_domain_detach+0x8/0x48
lr : camss_probe+0x374/0x9c0
<snip>
Call trace:
dev_pm_domain_detach+0x8/0x48
platform_probe+0x70/0xf0
really_probe+0xc4/0x2a8
__driver_probe_device+0x80/0x140
driver_probe_device+0x48/0x170
__device_attach_driver+0xc0/0x148
bus_for_each_drv+0x88/0xf0
__device_attach+0xb0/0x1c0
device_initial_probe+0x1c/0x30
bus_probe_device+0xb4/0xc0
deferred_probe_work_func+0x90/0xd0
process_one_work+0x164/0x3e0
worker_thread+0x310/0x420
kthread+0x120/0x130
ret_from_fork+0x10/0x20
Fixes: 23aa4f0cd327 ("media: qcom: camss: Move VFE power-domain specifics into vfe.c")
Cc: <[email protected]>
Signed-off-by: Vladimir Zapolskiy <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: amphion: Set video drvdata before register video device
commit 8cbb1a7bd5973b57898b26eb804fe44af440bb63 upstream.
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops.
Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Cc: <[email protected]>
Signed-off-by: Ming Qian <[email protected]>
Reviewed-by: TaoJiang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: imx-jpeg: Set video drvdata before register video device
commit d2b7ecc26bd5406d5ba927be1748aa99c568696c upstream.
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops.
Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: <[email protected]>
Signed-off-by: Ming Qian <[email protected]>
Reviewed-by: TaoJiang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: mtk-jpeg: Fix null-ptr-deref during unload module
commit 17af2b39daf12870cac61ffc360e62bc35798afb upstream.
The workqueue should be destroyed in mtk_jpeg_core.c since commit
09aea13ecf6f ("media: mtk-jpeg: refactor some variables"), otherwise
the below calltrace can be easily triggered.
[ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023
[ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
...
[ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17
...
[ 677.882838] pc : destroy_workqueue+0x3c/0x770
[ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[ 677.884314] sp : ffff80008ad974f0
[ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070
[ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690
[ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000
[ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0
[ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10
[ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d
[ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90
[ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001
[ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000
[ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118
[ 677.893977] Call trace:
[ 677.894297] destroy_workqueue+0x3c/0x770
[ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[ 677.895677] devm_action_release+0x50/0x90
[ 677.896211] release_nodes+0xe8/0x170
[ 677.896688] devres_release_all+0xf8/0x178
[ 677.897219] device_unbind_cleanup+0x24/0x170
[ 677.897785] device_release_driver_internal+0x35c/0x480
[ 677.898461] device_release_driver+0x20/0x38
...
[ 677.912665] ---[ end trace 0000000000000000 ]---
Fixes: 09aea13ecf6f ("media: mtk-jpeg: refactor some variables")
Cc: <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: i2c: dw9768: Fix pm_runtime_set_suspended() with runtime pm enabled
commit d6594d50761728d09f23238cf9c368bab6260ef3 upstream.
It is not valid to call pm_runtime_set_suspended() and
pm_runtime_set_active() for devices with runtime PM enabled because it
returns -EAGAIN if it is enabled already and working. So, adjust the
order to fix it.
Cc: [email protected]
Fixes: 5f9a089b6de3 ("dw9768: Enable low-power probe on ACPI")
Suggested-by: Sakari Ailus <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay
commit 6c5789c9d2c06968532243daa235f6ff809ad71e upstream.
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Cc: [email protected]
Signed-off-by: Francesco Dolcini <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: i2c: tc358743: Fix crash in the probe error path when using polling
commit 869f38ae07f7df829da4951c3d1f7a2be09c2e9a upstream.
If an error occurs in the probe() function, we should remove the polling
timer that was alarmed earlier, otherwise the timer is called with
arguments that are already freed, which results in a crash.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 0 at kernel/time/timer.c:1830 __run_timers+0x244/0x268
Modules linked in:
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.11.0 #226
Hardware name: Diasom DS-RK3568-SOM-EVB (DT)
pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __run_timers+0x244/0x268
lr : __run_timers+0x1d4/0x268
sp : ffffff80eff2baf0
x29: ffffff80eff2bb50 x28: 7fffffffffffffff x27: ffffff80eff2bb00
x26: ffffffc080f669c0 x25: ffffff80efef6bf0 x24: ffffff80eff2bb00
x23: 0000000000000000 x22: dead000000000122 x21: 0000000000000000
x20: ffffff80efef6b80 x19: ffffff80041c8bf8 x18: ffffffffffffffff
x17: ffffffc06f146000 x16: ffffff80eff27dc0 x15: 000000000000003e
x14: 0000000000000000 x13: 00000000000054da x12: 0000000000000000
x11: 00000000000639c0 x10: 000000000000000c x9 : 0000000000000009
x8 : ffffff80eff2cb40 x7 : ffffff80eff2cb40 x6 : ffffff8002bee480
x5 : ffffffc080cb2220 x4 : ffffffc080cb2150 x3 : 00000000000f4240
x2 : 0000000000000102 x1 : ffffff80eff2bb00 x0 : ffffff80041c8bf0
Call trace:
__run_timers+0x244/0x268
timer_expire_remote+0x50/0x68
tmigr_handle_remote+0x388/0x39c
run_timer_softirq+0x38/0x44
handle_softirqs+0x138/0x298
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x24/0x4c
do_softirq_own_stack+0x1c/0x2c
irq_exit_rcu+0x9c/0xcc
el1_interrupt+0x48/0xc0
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x7c/0x80
default_idle_call+0x34/0x68
do_idle+0x23c/0x294
cpu_startup_entry+0x38/0x3c
secondary_start_kernel+0x128/0x160
__secondary_switched+0xb8/0xbc
---[ end trace 0000000000000000 ]---
Fixes: 4e66a52a2e4c ("[media] tc358743: Add support for platforms without IRQ line")
Signed-off-by: Alexander Shiyan <[email protected]>
Cc: [email protected]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: imx-jpeg: Ensure power suppliers be suspended before detach them
commit fd0af4cd35da0eb550ef682b71cda70a4e36f6b9 upstream.
The power suppliers are always requested to suspend asynchronously,
dev_pm_domain_detach() requires the caller to ensure proper
synchronization of this function with power management callbacks.
otherwise the detach may led to kernel panic, like below:
[ 1457.107934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
[ 1457.116777] Mem abort info:
[ 1457.119589] ESR = 0x0000000096000004
[ 1457.123358] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1457.128692] SET = 0, FnV = 0
[ 1457.131764] EA = 0, S1PTW = 0
[ 1457.134920] FSC = 0x04: level 0 translation fault
[ 1457.139812] Data abort info:
[ 1457.142707] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1457.148196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1457.153256] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1457.158563] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001138b6000
[ 1457.165000] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000
[ 1457.171792] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 1457.178045] Modules linked in: v4l2_jpeg wave6_vpu_ctrl(-) [last unloaded: mxc_jpeg_encdec]
[ 1457.186383] CPU: 0 PID: 51938 Comm: kworker/0:3 Not tainted 6.6.36-gd23d64eea511 #66
[ 1457.194112] Hardware name: NXP i.MX95 19X19 board (DT)
[ 1457.199236] Workqueue: pm pm_runtime_work
[ 1457.203247] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1457.210188] pc : genpd_runtime_suspend+0x20/0x290
[ 1457.214886] lr : __rpm_callback+0x48/0x1d8
[ 1457.218968] sp : ffff80008250bc50
[ 1457.222270] x29: ffff80008250bc50 x28: 0000000000000000 x27: 0000000000000000
[ 1457.229394] x26: 0000000000000000 x25: 0000000000000008 x24: 00000000000f4240
[ 1457.236518] x23: 0000000000000000 x22: ffff00008590f0e4 x21: 0000000000000008
[ 1457.243642] x20: ffff80008099c434 x19: ffff00008590f000 x18: ffffffffffffffff
[ 1457.250766] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 63343a6d726f6674
[ 1457.257890] x14: 0000000000000004 x13: 00000000000003a4 x12: 0000000000000002
[ 1457.265014] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff80008250bbb0
[ 1457.272138] x8 : ffff000092937200 x7 : ffff0003fdf6af80 x6 : 0000000000000000
[ 1457.279262] x5 : 00000000410fd050 x4 : 0000000000200000 x3 : 0000000000000000
[ 1457.286386] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008590f000
[ 1457.293510] Call trace:
[ 1457.295946] genpd_runtime_suspend+0x20/0x290
[ 1457.300296] __rpm_callback+0x48/0x1d8
[ 1457.304038] rpm_callback+0x6c/0x78
[ 1457.307515] rpm_suspend+0x10c/0x570
[ 1457.311077] pm_runtime_work+0xc4/0xc8
[ 1457.314813] process_one_work+0x138/0x248
[ 1457.318816] worker_thread+0x320/0x438
[ 1457.322552] kthread+0x110/0x114
[ 1457.325767] ret_from_fork+0x10/0x20
Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: <[email protected]>
Signed-off-by: Ming Qian <[email protected]>
Reviewed-by: TaoJiang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: platform: rga: fix 32-bit DMA limitation
commit 953c03d8cb41d08fe6994f5d94c4393ac9da2f13 upstream.
The destination buffer flags are assigned twice but source is not set in
what looks like a copy+paste mistake. Assign the source queue flags so
the 32-bit DMA limitation is handled consistently.
Fixes: ec9ef8dda2a2 ("media: rockchip: rga: set dma mask to 32 bits")
Cc: <[email protected]>
Signed-off-by: John Keeping <[email protected]>
Reviewed-by: Michael Tretter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: verisilicon: av1: Fix reference video buffer pointer assignment
commit 672f24ed6ebcd986688c6674a6d994a265fefc25 upstream.
Always get new destination buffer for reference frame because nothing
garantees the one set previously is still valid or unused.
Fixes this chromium test suite:
https://chromium.googlesource.com/chromium/src/media/+/refs/heads/main/test/data/test-25fps.av1.ivf
Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: <[email protected]>
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[hverkuil: fix typo and add link to chromium test suite]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: ts2020: fix null-ptr-deref in ts2020_probe()
commit 4a058b34b52ed3feb1f3ff6fd26aefeeeed20cba upstream.
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010
RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6
R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790
R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001
FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ts2020_probe+0xad/0xe10 [ts2020]
i2c_device_probe+0x421/0xb40
really_probe+0x266/0x850
...
The cause of the problem is that when using sysfs to dynamically register
an i2c device, there is no platform data, but the probe process of ts2020
needs to use platform data, resulting in a null pointer being accessed.
Solve this problem by adding checks to platform data.
Fixes: dc245a5f9b51 ("[media] ts2020: implement I2C client bindings")
Cc: <[email protected]>
Signed-off-by: Li Zetao <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available
commit 8964eb23408243ae0016d1f8473c76f64ff25d20 upstream.
In fimc_md_is_isp_available(), of_get_child_by_name() is called to check
if FIMC-IS is available. Current code does not decrement the refcount of
the returned device node, which causes an OF node reference leak. Fix it
by calling of_node_put() at the end of the variable scope.
Signed-off-by: Joe Hattori <[email protected]>
Fixes: e781bbe3fecf ("[media] exynos4-is: Add fimc-is subdevs registration")
Cc: [email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[hverkuil: added CC to stable]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* efi/libstub: Free correct pointer on failure
commit 06d39d79cbd5a91a33707951ebf2512d0e759847 upstream.
cmdline_ptr is an out parameter, which is not allocated by the function
itself, and likely points into the caller's stack.
cmdline refers to the pool allocation that should be freed when cleaning
up after a failure, so pass this instead to free_pool().
Fixes: 42c8ea3dca09 ("efi: libstub: Factor out EFI stub entrypoint ...")
Cc: <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* net: phy: dp83869: fix status reporting for 1000base-x autonegotiation
commit 378e8feea9a70d37a5dc1678b7ec27df21099fa5 upstream.
The DP83869 PHY transceiver supports converting from RGMII to 1000base-x.
In this operation mode, autonegotiation can be performed, as described in
IEEE802.3.
The DP83869 has a set of fiber-specific registers located at offset 0xc00.
When the transceiver is configured in RGMII-to-1000base-x mode, these
registers are mapped onto offset 0, which should make reading the
autonegotiation status transparent.
However, the fiber registers at offset 0xc04 and 0xc05 follow the bit
layout specified in Clause 37, and genphy_read_status() assumes a Clause 22
layout. Thus, genphy_read_status() doesn't properly read the capabilities
advertised by the link partner, resulting in incorrect link parameters.
Similarly, genphy_config_aneg() doesn't properly write advertised
capabilities.
Fix the 1000base-x autonegotiation procedure by replacing
genphy_read_status() and genphy_config_aneg() with their Clause 37
equivalents.
Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection")
Cc: [email protected]
Signed-off-by: Romain Gantois <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: amphion: Fix pm_runtime_set_suspended() with runtime pm enabled
commit 316e74500d1c6589cba28cebe2864a0bceeb2396 upstream.
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: [email protected]
Fixes: b50a64fc54af ("media: amphion: add amphion vpu device driver")
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: venus: Fix pm_runtime_set_suspended() with runtime pm enabled
commit 2a20869f7d798aa2b69e45b863eaf1b1ecf98278 upstream.
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: [email protected]
Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Acked-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: gspca: ov534-ov772x: Fix off-by-one error in set_frame_rate()
commit d2842dec577900031826dc44e9bf0c66416d7173 upstream.
In set_frame_rate(), select a rate in rate_0 or rate_1 by checking
sd->frame_rate >= r->fps in a loop, but the loop condition terminates when
the index reaches zero, which fails to check the last elememt in rate_0 or
rate_1.
Check for >= 0 so that the last one in rate_0 or rate_1 is also checked.
Fixes: 189d92af707e ("V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.")
Cc: [email protected]
Signed-off-by: Jinjie Ruan <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: ov08x40: Fix burst write sequence
commit d0fef6de4f1b957e35a05a5ba4aab2a2576d6686 upstream.
It is necessary to account for I2C quirks in the burst mode path of this
driver. Not all I2C controllers can accept arbitrarily long writes and this
is represented in the quirks field of the adapter structure.
Prior to this patch the following error message is seen on a Qualcomm
X1E80100 CRD.
[ 38.773524] i2c i2c-2: adapter quirk: msg too long (addr 0x0036, size 290, write)
[ 38.781454] ov08x40 2-0036: Failed regs transferred: -95
[ 38.787076] ov08x40 2-0036: ov08x40_start_streaming failed to set regs
Fix the error by breaking up the write sequence into the advertised maximum
write size of the quirks field if the quirks field is populated.
Fixes: 8f667d202384 ("media: ov08x40: Reduce start streaming time")
Cc: [email protected] # v6.9+
Tested-by: Bryan O'Donoghue <[email protected]> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal()
commit 0f514068fbc5d4d189c817adc7c4e32cffdc2e47 upstream.
The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.
To mitigate this, free the buffer when allegro_alloc_buffer fails.
Fixes: f20387dfd065 ("media: allegro: add Allegro DVT video IP core driver")
Cc: <[email protected]>
Signed-off-by: Gaosheng Cui <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: uvcvideo: Stop stream during unregister
commit c9ec6f1736363b2b2bb4e266997389740f628441 upstream.
uvc_unregister_video() can be called asynchronously from
uvc_disconnect(). If the device is still streaming when that happens, a
plethora of race conditions can occur.
Make sure that the device has stopped streaming before exiting this
function.
If the user still holds handles to the driver's file descriptors, any
ioctl will return -ENODEV from the v4l2 core.
This change makes uvc more consistent with the rest of the v4l2 drivers
using the vb2_fop_* and vb2_ioctl_* helpers.
This driver (and many other usb drivers) always had this problem, but it
wasn't possible to easily fix this until the vb2_video_unregister_device()
helper was added. So the Fixes tag points to the creation of that helper.
Reviewed-by: Hans Verkuil <[email protected]>
Suggested-by: Hans Verkuil <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Fixes: f729ef5796d8 ("media: videobuf2-v4l2.c: add vb2_video_unregister_device helper function")
Cc: [email protected] # 5.10.x
[hverkuil: add note regarding Fixes version]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
* media: uvcvideo: Require entities to have a non-zero unique ID
commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195 upstream.
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero
unique ID.
```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```
So, deny allocating an entity with ID 0 or an ID that belongs to a unit
that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due
to a chain of entities referring to themselves. In one particular case, an
Output Unit is connected to an Input Unit, both with the same ID of 1. But
when looking up for the source ID of the Output Unit, that same entity is
found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID
was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[ 20.830206] usb 1-1: Using ep0 maxpacket: 8
[ 20.833501] usb 1-1: config 0 descriptor??
[ 21.038518] usb 1-1: string descriptor 0 read error: -71
[ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201)
[ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized!
[ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized!
[ 21.042218] ------------[ cut here ]------------
[ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0
[ 21.043195] Modules linked in:
[ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444
[ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 21.044639] Workqueue: usb_hub_wq hub_event
[ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0
[ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00
[ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246
[ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818…
gregkh
pushed a commit
that referenced
this pull request
Dec 14, 2024
[ Upstream commit 826cc42 ] My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 14, 2024
…dfl() [ Upstream commit f39489f ] When getting an LLC CPU mask in the default CPU selection policy, scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected dereference often causes the following warning and can cause an invalid memory access in the worst case. Therefore, protect dereference of a sched_domain pointer using a pair of rcu_read_lock() and unlock(). [ 20.996135] ============================= [ 20.996345] WARNING: suspicious RCU usage [ 20.996563] 6.11.0-virtme #17 Tainted: G W [ 20.996576] ----------------------------- [ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage! [ 20.996576] [ 20.996576] other info that might help us debug this: [ 20.996576] [ 20.996576] [ 20.996576] rcu_scheduler_active = 2, debug_locks = 1 [ 20.996576] 4 locks held by kworker/8:1/140: [ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590 [ 20.996576] #1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590 [ 20.996576] #2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60 [ 20.996576] #3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0 [ 20.996576] [ 20.996576] stack backtrace: [ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme #17 [ 20.996576] Tainted: [W]=WARN [ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 20.996576] Workqueue: pm pm_runtime_work [ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms [ 20.996576] Call Trace: [ 20.996576] <IRQ> [ 20.996576] dump_stack_lvl+0x6f/0xb0 [ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96 [ 20.996576] scx_select_cpu_dfl+0x234/0x260 [ 20.996576] select_task_rq_scx+0xfb/0x190 [ 20.996576] select_task_rq+0x47/0x110 [ 20.996576] try_to_wake_up+0x110/0x7d0 [ 20.996576] swake_up_one+0x39/0x60 [ 20.996576] rcu_core+0xb08/0xe50 [ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5 [ 20.996576] ? mark_held_locks+0x40/0x70 [ 20.996576] handle_softirqs+0xd3/0x410 [ 20.996576] irq_exit_rcu+0x78/0xa0 [ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80 [ 20.996576] </IRQ> [ 20.996576] <TASK> [ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70 [ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c [ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246 [ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040 [ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b [ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 [ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246 [ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800 [ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70 [ 20.996576] serial_port_runtime_resume+0xd4/0x1a0 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] __rpm_callback+0x44/0x170 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_callback+0x55/0x60 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_resume+0x582/0x7b0 [ 20.996576] pm_runtime_work+0x7c/0xb0 [ 20.996576] process_one_work+0x1fb/0x590 [ 20.996576] worker_thread+0x18e/0x350 [ 20.996576] ? __pfx_worker_thread+0x10/0x10 [ 20.996576] kthread+0xe2/0x110 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork+0x34/0x50 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork_asm+0x1a/0x30 [ 20.996576] </TASK> [ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space) Signed-off-by: Changwoo Min <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
gregkh
pushed a commit
that referenced
this pull request
Dec 14, 2024
[ Upstream commit 826cc42 ] My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RadxaNaoki
pushed a commit
to RadxaNaoki/linux
that referenced
this pull request
Dec 22, 2024
The following kernel oops is thrown when trying to remove the max96712 module: Unable to handle kernel paging request at virtual address 00007375746174db Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000 [00007375746174db] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [gregkh#1] PREEMPT SMP Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2 imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse [last unloaded: imx8_isi] CPU: 0 UID: 0 PID: 754 Comm: rmmod Tainted: G C 6.12.0-rc6-06364-g327fec852c31 gregkh#17 Tainted: [C]=CRAP Hardware name: NXP i.MX95 19X19 board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : led_put+0x1c/0x40 lr : v4l2_subdev_put_privacy_led+0x48/0x58 sp : ffff80008699bbb0 x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8 x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000 x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1 x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473 Call trace: led_put+0x1c/0x40 v4l2_subdev_put_privacy_led+0x48/0x58 v4l2_async_unregister_subdev+0x2c/0x1a4 max96712_remove+0x1c/0x38 [max96712] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x4c/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 max96712_i2c_driver_exit+0x18/0x1d0 [max96712] __arm64_sys_delete_module+0x1a4/0x290 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400) ---[ end trace 0000000000000000 ]--- This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata() is called again and the data is overwritten to point to sd, instead of priv. So, in remove(), the wrong pointer is passed to v4l2_async_unregister_subdev(), leading to a crash. Fixes: 5814f32 ("media: staging: max96712: Add basic support for MAX96712 GMSL2 deserializer") Signed-off-by: Laurentiu Palcu <[email protected]> Cc: [email protected] Reviewed-by: Niklas Söderlund <[email protected]> Reviewed-by: Ricardo Ribalda <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Bumps certifi from 2023.7.22 to 2024.7.4.
Commits
bd815382024.07.04 (#295)06a2cbfBump peter-evans/create-pull-request from 6.0.5 to 6.1.0 (#294)13bba02Bump actions/checkout from 4.1.6 to 4.1.7 (#293)e8abcd0Bump pypa/gh-action-pypi-publish from 1.8.14 to 1.9.0 (#292)124f4ad2024.06.02 (#291)c2196ce--- (#290)fefdeecBump actions/checkout from 4.1.4 to 4.1.5 (#289)3c5fb15Bump actions/download-artifact from 4.1.6 to 4.1.7 (#286)4a9569aBump actions/checkout from 4.1.2 to 4.1.4 (#287)1fc8086Bump peter-evans/create-pull-request from 6.0.4 to 6.0.5 (#288)Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
@dependabot rebasewill rebase this PR@dependabot recreatewill recreate this PR, overwriting any edits that have been made to it@dependabot mergewill merge this PR after your CI passes on it@dependabot squash and mergewill squash and merge this PR after your CI passes on it@dependabot cancel mergewill cancel a previously requested merge and block automerging@dependabot reopenwill reopen this PR if it is closed@dependabot closewill close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually@dependabot show <dependency name> ignore conditionswill show all of the ignore conditions of the specified dependency@dependabot ignore this major versionwill close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this minor versionwill close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this dependencywill close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)You can disable automated security fix PRs for this repo from the Security Alerts page.