DIS_TDAQ

Trigger and Data Acquisition codes for MAGIS-100 Distributed Imaging System (DIS)

These codes are supposed to run on a Raspberry Pi (RPi) with Spinnaker to configure and read the cameras and pigpio to switch power and trigger the cameras.

RPi Set-up

The standard set-up is:

• Hardware: Raspberry Pi 4B (8GB RAM)
• OS: 64-bit Raspberrian OS (Debian GNU/Linux 11, Bullseye)
• Software:
  • Spinnaker SDK: 2.7.0.128-arm64
  • pigpio: 2.52

These codes might run fine on a different set-up, but it is not guaranteed.