Patched to work with ARM devices, tested on Raspberry Pi 3 and Beaglebone Black Rev C, running Debian Wheezy.
git submodule update --init --recursive
cd rtl-sdr/
mkdir build
cd build
cmake ../
make
sudo make install
sudo cp ../rtl-sdr.rules /etc/udev/rules.d/rtl-sdr.rules
sudo ldconfig
sudo vi /etc/modprobe.d/blacklist-rtl.conf
Add these three lines
blacklist dvb_usb_rtl28xxu
blacklist rtl2832
blacklist rtl2830
Now reboot with dongle attached
- dsd
- dump1090
- dumpvdl2
- gpredict
- mbelib
- multimon-ng
Send band survey to another computer over SSH
rtl_power -f 118M:137M:8k -g 50 -i 10 -e 5h | ssh [email protected] "cat > /home/user/airband.csv"
Removing librtlsdr0 fixed this issue.
sudo apt-get remove librtlsdr0